February 2015 - Tractors & Parts For Sale

All Classified Ads

13.6/12x38 Slip/clamp on duals, belly pump, front bolster for Farmall M, $200 for all; Russ Shorten nnn-nnn-nnnn or nnn-nnn-nnnn (Dayton WA)

200 large tractor patches, can be ironed or sewed on, great for shirts, hoodies, etc., priced to sell; Larry nnn-nnn-nnnn or xxxx@xxxx.xxx (Las Vegas NV)

Allis Chalmers B and Case VA parts including adjustable wide front axles; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Allis Chalmers B, complete tin & hydraulics; Delmer Riel nnn-nnn-nnnn (Yakima WA)

Allis Chalmers D 12 Collector tractor with sickle mower, all original, runs very well, $4500 obo; Jerry nnn-nnn-nnnn (Gaston OR)

Allis Chalmers G with hydraulic cultivators, new tires on rear, $3650; Jerry nnn-nnn-nnnn (Gaston OR)

Allis Chalmers HD 14C crawler, 1947, approximate date. Should go to an AC collector, it is the first crawler tractor built with torque converter drive. It has an Isaacson cable blade, Carco logging winch and nice canopy. Starts and runs. Powered with 671 GM diesel. All sheet metal in good condition, $4000 or offer; Paul Valentine nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)

Allis Chalmers HD3 crawler with loader & 3 rippers in rear, $6500 obo; Phil Morrison nnn-nnn-nnnn (Redmond OR) [link to photo]

Allis Chalmers M with hyd dozer, $950 obo; Lynn Pekarek nnn-nnn-nnnn (Chico CA)

Allis Chalmers WM, 1934, valves ground, tracks good, 15" pads, replaced steering clutch discs and crank start. Sand blasted and painted, $2300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Allis Chalmers WM, 1937, valves ground, cylinders honed, rebuilt carb, several steering clutch plates replaced, electric start, sand blasted and painted, $2750 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Avery A radiators, two, $75 each + shipping; Garland nnn-nnn-nnnn (Port Townsend WA)

Brake band, new, for John Deere 40C or 440-I, and rear belly pan for 440-I; J Keith nnn-nnn-nnnn (Hermiston OR)

Case 300 round nose, very nice unrestored tractor complete with Eagle hitch, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case 430 gas industrial tractor comes with side mount brush hog and opposite side hyd tank and counter weight. Used for mowing shoulders on roads. Good tires and paint. Runs and operates well, $3975 obo, some trades? Don Chappell nnn-nnn-nnnn (St Helens OR)

Case 530 CK diesel loader tractor. 1964, 8 speed transmission w/ Casomatic. Power steering, 3 pt draft control w/rear box scraper. Good tires w/rear wts. Starts and runs good. Pictures available, $5500; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)

Case backhoe less motor and less hydraulic pump parts tractor. Could be a Case 310 gas, not sure. I hate to scrap it. Would like $1500 obo; Dave nnn-nnn-nnnn (Carson City NV) [link to photo]

Case C, parting out Case C, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, S or R F&H hc245 rear round spoke wheels 9x24, very nice and rare, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case D parts: manifold, valve cover, radiator cap & misc. Call for details; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Rohnert Park CA)

Case G320W. Tractor loader backhoe. Runs and drives, needs hydraulic hoses, $1250; nnn-nnn-nnnn (Rainier OR)

Case parts VAC, SO and 500D 6 cyl diesel. Engine parts, including SO and VAC block, pistons, cranks, heads, manifolds, air cleaner for 500, brake parts, clutch, flywheel and pressure plates. Hoods, fenders and much more. Call with your needs; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)

Case R, 1939. Runs, good oil pressure, tin OK, tires poor, needs some tlc, $750; Dave nnn-nnn-nnnn (Boring OR)

Case SC wide front, 1946. Complete running and driving tractor. ALWAYS fires up! Has been completely gone through by previous owner, paint faded and cracked, great rear tires fronts are car tires. Has aftermarket hydraulic pump and rear remote, $1800; Chip nnn-nnn-nnnn (Mattawa WA)

Case VAC, 1952, single front end, runs good. Lots of work done on tractor, have all manuals; Ray Gossett nnn-nnn-nnnn (Hermiston OR)

Case VAI, 1947. Did run. Engine is free. Tires hold air but are poor tread. Rear weights, PTO. No three point. Needs a little work and it will run. Pictures available, $350; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)

Case wide tread tractor, 1936, on full steel, includes set of rubber tires & wheels plus a cultivator, $5250 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 10 parts, mostly castings; Buck nnn-nnn-nnnn (Greenville IL)

Caterpillar 10's: 1 Narrow stuck, $500. 1 Narrow not stuck has carb, $2,000. 1 Wide not stuck has carb, $2,500; Aaron nnn-nnn-nnnn (Walnut Grove CA) [link to photo]

Caterpillar 22, 1937, sn 1J1470WSP, wide gauge, tracks in good condition, seat in good condition, runs good,  original condition, crawler only had 2 owners rancher and me, located in Minden Nevada, $2800 obo; Tim Totaro nnn-nnn-nnnn (Minden NV) [link to photo]

Caterpillar 2-Ton. Runs well, $3750; Jim Messick nnn-nnn-nnnn (Linden CA) [link to photo]

Caterpillar D2 5J series wide gauge tractor. Runs good, has a hydraulic bulldozer blade, brand unknown. Undercarriage fair. Located in Eureka NV, $2500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2 dozer, 1938, $2850 obo; Lynn Pekarek nnn-nnn-nnnn (Chico CA)

Caterpillar D2 engine side panels, $195 per pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D2 pto unit with control & coupler parts, $300; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

Caterpillar D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar D4 angle dozer elect. Pony engine $3900 obo; Lynn Pekarek nnn-nnn-nnnn (Chico CA)

Caterpillar D7 3T series, 1948. Runs very good. Has electric start pony which runs well. Has hydraulic assist steering, and forward/reverse lever. Undercarriage is good, grousers are a little low. Tractor is bare, no attachments, $3500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D7/D8 goat motor magnetos All Bosch 5 of them in all. Also have one Eisemann gear driven Caterpillar magneto. One D7 head from 3T series, rebuilt ready to go. Make offer!; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

Caterpillar direct start D2 dozer with working Hyster winch and Cat dozer blade. Runs good, needs one steering clutch fixed and wiring for glow plugs fixed. $4000 as is or $4400 with steering clutch fixed; Tim Bynum nnn-nnn-nnnn or xxxx@xxxx.xxx (Yreka CA)

Caterpillar large hydraulic rams (2) from a D4-7U front loader. Both for $95. Photo available by email; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)

Caterpillar split head Thirty radiator tanks and core, make offer; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Caterpillar Thirty tail seat tractor, nearly complete not stuck; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Cletrac AD 1936 Hercules diesel, hydraulic dozer (Issacson), valves ground, cylinders honed. Diesel pump gone through and adjusted, starter gone through, steering bands replaced, good tracks, sand blasted and painted, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2 1937 Buda diesel, valves ground, starter gone through, diesel pump cleaned and gone through and adjusted, set for pressure. Sand blasted and painted. Cylinders honed. Good tracks, $2200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac fuel tank. Will fit Avery, Wards Twin Row, Minneapolis BF, no holes; Garland nnn-nnn-nnnn (Port Townsend WA)

Cletrac HG31 narrow gauge crawler, little over three feet wide total. Been sitting for many years but motor will turn, would make great restoration. Has nice original tag. Good tracks, $2200; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Cletrac W, nearly complete, make offer; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Collection of original Caterpillar Manuals for early Cat equipment including dozers, graders, loaders, scrapers and others. Approximately 170 books. Would like to sell as a set but may sell individually @ $25.00 each. Will entertain offers as a collection; Don Chappell nnn-nnn-nnnn (St Helens OR)

Co-op E3, 1949, with wide front end. Good tires, good tin, new water pump, rebuilt carb starter & generator, $1650; Delmer Riel nnn-nnn-nnnn (Yakima WA)

Eisemann G-4 magneto, rebuilt, $275; Alan Langmuir nnn-nnn-nnnn (West Sacramento CA)

Empire, 1948, these tractors were built after WWII using Willys jeep drivetrains. The engine in this tractor is not original, but is a professionally rebuilt counterbalanced flathead 4 Jeep engine. All electrical has been converted to 12v (including the starter). This would make a great tractor drive tractor as it easily does 20 mph before the tire balance comes into play. $4000 obo; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR) [link to photo]

Ensign carbs for Cat 20, 30 all rebuilt $450. D2-D6 battery box covers with thumb screws $80; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall 140 tractor with hydraulics, $1200; Jerry nnn-nnn-nnnn (Gaston OR)

Farmall 200 with equipment, hoods and grills for H Farmalls, $25 each. Tractor fender radio, $95. IHC carbs, generators, starters, and mags, many misc. IH parts; Fred Gilbertson nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Farmall A, comes with sickle bar mower, plow, other attachments. Very nice condition, $1450 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall A, restore or parts, $500; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall and International tractor parts for M, H, C, B, A & Cub. Tell me what you need; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall AV 1952, new front tires, gauges, kill switch, seat, steering wheel, breather cap, gas cap, radiator cap, front wheel weights, rears if wanted. Reconditioned cultivators, magneto, starter, 3 lights, every bolt and nut will turn. Has factory belly blade. Cream puff!! Just needs paint. Tin is perfect, price reduced to $2250; Roger nnn-nnn-nnnn (Redding CA) [link to photo]

Farmall Cub LoBoy, 1958, new tires, front wheel weights, fast hitch with fast hitch plow, fast hitch trailer ball. Runs good. Have new wire harness and head lights, $2400; John Loder nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA) [link to photo]

Farmall Cub mag, reconditioned, like new, $125 obo; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Rohnert Park CA)

Farmall Cub, 1950. Very unique with custom hydraulic belly blade and ripper bar. Very straight. Good for landscaping or corral, $2450; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall Decals. Complete sets of the correct decals for the Regular, F-20, F-30, F-12 and F-14. Partial sets for the W-series, O-series, and T-series. These are commercial grade vinyl decals with a UV protective coating. Pictures available by email. Complete sets start at $58; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)

Farmall F-12, 1936. Older restoration with F-14 drive train for lower gear ratio for tractor pulls, new rear rubber, extra set steel wheels, rebuilt engine, new radiator, high altitude pistons, $1800 obo; Alan Langmuir 916 524-7055 (West Sacramento CA)

Farmall H with loader and bottom blade, runs, $1600; Delmer Riel nnn-nnn-nnnn (Yakima WA)

Farmall H, 1940, sn 49095. Very complete and good tin. Tires ok, engine stuck, $1100; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall live hydraulic pump from a 300 lg. Fast hitch drawbar large, misc parts; Al nnn-nnn-nnnn (Elko NV)

Farmall M, 1952. Restored with 4 new tires, good paint, rebuilt engine, parade ready, runs good, $4000; Aubrey Greer nnn-nnn-nnnn (Lompoc CA)

Farmall rims (4), 38"x10" had slight rust but removed & sealed, $60 each; Delmer Riel nnn-nnn-nnnn (Yakima WA)

Farmall sheet metal from A to 450 plus a bunch of misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall SM 1953 with loader. Farmall SH 1954, $4850; Al nnn-nnn-nnnn (Elko NV)

Farmall Super A parts & sickle bar mower, $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Super C row crop front w/hyd blade. Could be made into a loader. Runs well, $1100 or reasonable offer; Garland nnn-nnn-nnnn (Port Townsend WA)

Farmall Super H, runs good, good tires. Have IH Wide and Narrow front ends. Have rear lift made by IH, $2,500; Aaron nnn-nnn-nnnn (Walnut Grove CA) [link to photo]

Farmall Super M motor stuck, great project, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super M, 1953, with F-11 Farmhand with rear field chains; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super M, 1954, all Z castings, front & rear weights, NOS piston & sleeve set installed, new head, everything else original, very nice paint & decals 2 years old. IH muffler, belt pulley, rear remote hydraulic valve; Al Barkl nnn-nnn-nnnn (Elko NV)

Fender weights, 300 lb each or better, bolts on like fenders. Came off Ford 851. Will fit Massey & others, both for $150 obo; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Rohnert Park CA)

Ford (2002-2004?) with 3 cylinder diesel, new rear long bar/short bar tires, paint is blue and grey; Perry Rosenquist nnn-nnn-nnnn (Noonan ND)

Ford 2N, runs good, 3pt works well, near new tires front and rear, tin good and straight, nice paint, has new back blade, $2750; Larry Manley nnn-nnn-nnnn (Dorris CA)

Ford 600 & 800 series tractors, running and ready for work; Buck Charles nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Ford 800 Series, 1958, very good condition, like new rear tires, $3750; Jerry nnn-nnn-nnnn (Gaston OR)

Ford Funk Conversion 8N Ford tractor with OHV Ford 6 cylinder. All original with aux, gas tank and air cleaner. I drove it off the trailer about 7 years ago, and have not moved it since, nor have I started it. Too many projects. Needs to go to a good home. Good solid sheet metal, $3600. Local pick up only. Email for images; John nnn-nnn-nnnn or xxxx@xxxx.xxx (Located west of Missoula MT)

Ford gear down transmission. Made by Everett Trenching Co of Los Angeles. Same as Sherman. Fits Jubilee, NAA, 600, 800, 900. Came off of 820 5-speed, $400; Aubrey Greer nnn-nnn-nnnn (Lompoc CA) [corrected contact]

Fordson Trackson crawler, 1927, all complete with great paint, owned over 25 years, was running great when stored, price reduced to $5900 obo; Mike Tyler nnn-nnn-nnnn (Moore MT) [link to photo]

Fordson tractors: Would like to trim down my Fordson collection. I have about 9 of them ranging from parts tractors to complete tractors in various conditions. Some on steel, some on cutdowns, some with Hamilton transmissions, one with a Hyster double drum winch. Most are $800 to $2000 range; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR) [link to photo]

Grille for John Deere 110, NOS, part #M1906T, $40; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

International 350 Hi-Utility fast hitch 1 remote runs, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 560 Wheatland diesel. Good runner. Has PTO and single remote. Extra PTO unit for parts, $4250; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

International Cub Low-Boy, 1955. Runs good, looks good. Has fast hitch system, 12 volt electrical. Tires are like new on the front, approx. 70% on the rear. I don’t think you’ll find a much nicer one, $2995; Lee nnn-nnn-nnnn (Crawfordsville OR)

International Harvester Farmall, 1953. Completely restored and finished in Farmall Red! This absolutely stunning tractor has won several parade awards in the past. I purchased it in 2007 with the intentions of starting an antique tractor collection. Shortly thereafter, I purchased a large ranch and just have not had the time to add to the collection or enjoy the Farmall. It has been stored in the barn ever since. It really is beautiful but I need to extra space in my barn to store additional haying equipment. $5,500 obo; Norm nnn-nnn-nnnn (Carson City NV) [link to photo]

International Harvester T20 crawler tractor. Does not run, has a hole in the block. Parts tractor or restoration. Weighs 7100# as is. Will assist in loading, $599. Email for more pictures; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA) [link to photo]

International TD14A dozer tractor, 1955, sn 39801. Does not run, cable angle blade, Carco winch, cable front unit, international UD14 engine, 11' wide blade, great for parts or restoration, still does not run, engine appears to be frozen, will load on your truck, $1999. Email for more pictures; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA) [link to photo]

International tractors: 1944 (no model listed), excellent condition, new paint job, narrow front, 12 volt, hydraulics; 1939 W-30, good steel, 4 new tires; 1938 10-20 on good steel lugs (original), new paint job and decals, runs very good; Perry Rosenquist nnn-nnn-nnnn (Noonan ND)

International TD6 series II direct start 6 cyl. Diesel hydraulic blade with hydraulic tilt built up grousers-good yellow paints engine wants to lope at idle. Probably needs adjustment on governor. Good solid dozer, $4250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere 2 cylinder crawler parts. lots of misc. parts; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 2010, yellow, no backhoe, loader rebuilt bucket, bad trans interior pump, best offer; Sue Miller nnn-nnn-nnnn (Eugene Oregon)

John Deere 300 Skip loader tractor for sale. (Early 60s) Not running, needs TLC. New front tires and starter, $1250; Bernie Swetz nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Rosa CA)

John Deere 40 and M engines and many usable engine parts; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

John Deere 40 two rear wheel weights, restored, $75; John nnn-nnn-nnnn or nnn-nnn-nnnn (Dallas OR)

John Deere 40S, 1953, model 40S. Complete original tractor. engine stuck and needs front tires, $700. Pictures available by email.; John Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Dallas OR)

John Deere 40U, parting out. Good 26" rear tires and one good rim. Engine stuck; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere 420, 1958. Running when parked, restoration started but not completed. Partially apart. Head rebuilt, gas tank and steering shaft out, carb & manifold off. Lost interest. Have 2 extra hoods and complete hydraulic seal kit $2700; Roland Bleitz nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)

John Deere 420-W, 5 spd trans, 1958. Running when parked 7 years ago, head has since been rebuilt, carb apart, gas tank out, steering shaft out, have complete new trans seal parts, carb kit, other seals. 2 extra hoods. 1-rear tire 90%, other 60%. I've lost interest in it. All there, just needs to be put back together by someone that knows these. $2750; Roland nnn-nnn-nnnn (Grants Pass OR)

John Deere 430 tricycle (restored) new rubber, COLLECTOR, $6500 obo; Jerry nnn-nnn-nnnn (Gaston OR)

John Deere 50 tricycle with Yakima hitch, runs; Delmer Riel nnn-nnn-nnnn (Yakima WA)

John Deere 520 row crop. 9.5-42 rear single front, sn 5207795. Tractor is in very good condition. Put it in the field or add it to your collection. Power steering, live PTO, original three point hitch, hydraulic lift cylinder for front cultivator. Live hydraulics, sealed beam lights. All the fluids have been changed and everything works, $6500 or offer; Rick nnn-nnn-nnnn (Kuna ID) [link to photo]

John Deere 60 parted out, lots left: crank, head, grill, hood, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 60 wide front, excellent sheet metal, recent engine work. Very handsome John Deere ready for proper restoration, $3975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere A, B, M, 40-440 tractor parts. No sheet metal. Lots of engine parts, blocks, heads, rods, some pistons. Please text or email with needs; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere B carburetor, $75; John nnn-nnn-nnnn or nnn-nnn-nnnn (Dallas OR)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, front spokes very good unstyled tractor ready for paint. Price reduced to $3975 firm; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939, (2). One set of skeleton steel wheels in good condition. These are a matching set. One hub was replaced in 1966 and was used on the tractor after repair, $800; M. Stanerson nnn-nnn-nnnn or xxxx@xxxx.xxx (North English IA)

John Deere B, 1951. Starts and runs good. Original paint. Straight hood, missing grills. Decent older tires. Asking $1200 obo text or email for pix; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere B, late styled, parting out. Good sheet metal, many useable parts, give me a call today; John Bold nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)

John Deere BO, 1937, runs good, been in lots of parades, and hay rides. Has almost new tires and brakes are very good. Rebuilt and painted about ten years ago, with new aftermarket fenders, $4900; John Loder nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)

John Deere D, 1935, complete, not stuck. Comes with brand new fenders & hood, very nice old '36 D, $2975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere L radiator, $75; Buck nnn-nnn-nnnn (Greenville IL)

John Deere L, 1939? Very straight tractor in running condition. Good tires and wheels. Comes with cultivators, $3975 obo, some trade? Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere L, older restoration, good paint. Bottom mower, runs; Delmer Riel nnn-nnn-nnnn (Yakima WA)

John Deere M, parting out. One good rear wheel and tire. Engine stuck; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere rings: set of new standard rings, part #AB3725R, $85. (New cost $113.76 + tax); Garland nnn-nnn-nnnn (Port Townsend WA)

John Deere tractors: 1952 John Deere AW, $1850. 1942 John Deere B on tip toe steel rears, front steel with extensions, $2750. 1940 John Deere HN, $2500. 1947 John Deere BN with 42" rear wheels and 16" single front, $1500. 1949 John Deere M with loader, $1200. 1946 John Deere BW with anteater front, $1500. Parting out 1947 John Deere B, also have many styled A parts; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere: John Deere A, unstyled, needs to be restored. Also John Deere 40U, runs but needs TLC; D. Walchli nnn-nnn-nnnn (Hermiston OR)

Kubota L245, L295 parts POR, used loader off L295, $1,500, also Kubota B7100 parts. Kubota 36” 3pt pto rotary tiller $950; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Magneto for Cat D2 and D4 staring motor $300; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 35 diesel. 3 pt. Overriding clutch, very good sheet metal, good front wheels and tires. Good rear tires on spin-out wheels. Runs good, $2975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Massey Ferguson 35. Farmed last season. Good loaded tires. Gas, electronic ignition, $2200; nnn-nnn-nnnn (Rainier OR)

Massey Ferguson 65 gas, sn 682854, 1961 model, 3 pt, power steering, original. Located in Evans/Greeley CO., $4200; Jim Robinett nnn-nnn-nnnn or tractrmnul.aol.com (corrected ad)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 55 diesel. Engine free, does not run, fuel injector pump will not make pressure. Has two bad tires, needs paint. Sheet metal is straight. Would make a nice pulling tractor, $1850; Paul Valentine nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)

Massey Harris Pony, 98% there, good tires & tin & sheet metal, loose, $1200; Delmer Riel nnn-nnn-nnnn (Yakima WA)

McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4: Runs, missing orchard sheet metal, $1000. McCormick Deering O-4: Very early motor stuck nice, missing orchard sheet metal, $650. McCormick Deering O-4, parting out: batwings/engine side panels, orchard belt pulley, hood, shutters, all-fuel manifold, exhaust elbow plus misc. parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Minneapolis Moline BF 3 pt hitch, wheels, fenders, grill, frame, diff & trans, drawbar, etc; Delmer Riel nnn-nnn-nnnn (Yakima WA)

Mitsubishi 160 D 4x4 with 5 ft land pride mower, runs great, $3950; Jerry nnn-nnn-nnnn (Gaston OR)

New reproduction hood for a John Deere AOS, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)

Oliver 60 row crop narrow front. Engine turns over, not running, has PTO, $400; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)

Oliver 60, 1948, wide front row crop. Will run. 2 front 1 rear side panels, very good mismatched rear tires, good fenders, $650; Dave nnn-nnn-nnnn (Boring OR)

Oliver 990 GM Diesel 1960 twin stick pto and hyd motor stuck needs radiator and exhaust manifold $7200 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver HG crawler, restored, correct paint & decals. Runs well, good tracks, $2500; Al nnn-nnn-nnnn (Mt Vernon WA)

Oliver OC3 crawlers parts, lots of misc. parts; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Oliver Super 55, nice running gas tractor. Great rear tires, fronts ok. Three point and PTO. Has not been repainted, original decals still show. Complete but missing grill, $2000 obo; Chip nnn-nnn-nnnn (Mattawa WA)

Oliver Super 66, gas. Runs good. Good tires. No 3-point. $2,500 firm; Aaron nnn-nnn-nnnn (Walnut Grove CA) [link to photo]

Parting out Massey 65, Minnie M5, Allis Chalmers Monarch 35 or K. Belt pulley attachment for Allis Chalmers 35 or K; Buck nnn-nnn-nnnn (Greenville IL)

Rear lift attachments for Farmall Super A $50; Wendell Newman nnn-nnn-nnnn (Carson City NV

Rear tractor tire, Goodyear, 12.4 x 24, long bar, short bar, excellent tread, no breaks, no weather checking, $125 OBO; David Cruickshank nnn-nnn-nnnn (Dayton OR)

Rebuilt starters and mags for Cletrac HG and Oliver OC3 crawlers, all rebuilt by a local shop; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Tire: 14.9x28, $50; Dave Gallant nnn-nnn-nnnn (Boring OR)

Tire: Firestone Field and Road 15.5-38, 8ply 80% tread, $350; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Tires: 14.9x24, 85% matching tread, like new 6-ply rating, $450 for pair; Lon Sisson nnn-nnn-nnnn or nnn-nnn-nnnn (Rohnert Park CA)

Tires: Goodyear 23x10.50x12 turf off 782 Cub Cadet. Very good condition, $100; Al Barkl nnn-nnn-nnnn (Elko NV)

Wheel weights: Cockshutt rear wheel weights, fits model 30, have 3 sets, $50 per set; Al nnn-nnn-nnnn (Elko NV)

Wheel: Front single wheel for Farmall B or C $60; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Wheels: Complete set (front and back) of steel wheels for a war year 2N Ford tractor. These are in excellent if not mint shape, ready to go on a restored war years Ford 2N, $1200; Local pick up only. Email for images; John nnn-nnn-nnnn or xxxx@xxxx.xxx (Located west of Missoula

MT)

Wheels: pair of factory flat spoke 12 spline wheels for John Deere B, painted & nice. 1 has bad hub, $300; Dave Itel nnn-nnn-nnnn (Aurora OR)