April 2015 - Engines & Parts For Sale

All Classified Ads

Benz 5hp sideshaft engine, made in Czech Republic, portable engine on factory cart with cooling tank, muffler and wheel brakes, interesting inertia style hit & miss governor, Bosch flipper magneto, a little over 7000 Benz engines were produced and this is the largest size they made and has 32” flywheels. In running condition, last run February 23, 2015, look for Youtube video “5 hp Benz engine”, $8500 (lower price); George Best nnn-nnn-nnnn (Beaverton OR)

Black Bear 25hp, 1928, oil field side shaft engine. Mounted on a 10,500# ABU tandem axle trailer. 11" cylinder with an 18" stroke. 1760 c.i.d. Flat belt driven Pickering fly-ball governor latches exhaust valve open for hit and miss operation. Turns at about 50 rpm. A real crowd pleaser at shows. Air start with dedicated flywheel driven air compressor and air tank. Originally in the Montana oil fields for 40 years, restored and rebuild in the Pacific Northwest. Many technical and historical documents included. Licensed trailer with clear title. $12,000; Doug Brookens nnn-nnn-nnnn or xxxx@xxxx.xxx (Issaquah WA)

Carburetor and fuel tank for 1 HP International Tom Thumb, carb fuel adjuster is free. Number G6971 is cast into side and IH on other side. Carburetor looks to be in good condition, no C B W. Fuel tank looks to be useable has some rust inside no fuel cap or neck, tank measures 10-3/4 X 3-1/4, $140; Daniel M. Thompson nnn-nnn-nnnn or xxxx@xxxx.xxx (Winnemucca NV)

Delco light plant complete free, $175; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)

Engines for sale: New Holland, rare 3 hp on cart, $3200. New Holland, 2 hp on cart, $3000. Aermotor fluted hopper 2-1/2 hp, very early Pat. Pending on parts on original skid, $3500. Bullseye 2 hp on original skid with mag (mag not working) on cart, $3200. International Harvester Famous 4 hp hopper-cooled, new sleeve on cart, $3000. International Harvester Famous 2 hp vertical custom cart, $3000. Pictures can be seen on website: Glenns antique engines at hitnmiss.lonax.com Glenn nnn-nnn-nnnn or email xxxx@xxxx.xxx (Auburn CA)

Engines: 30 Hit & miss engines, some on carts, some have been shown, including 3 hp John Deere on shop-built tractor, headless Witte, Fairbanks-Morse, Ottawa, Jaeger, Hercules, Economy, International, Stover, Sattley, shop sale on April 11-12 8AM til dark. No early sales; David Sanders nnn-nnn-nnnn Sale at: 71570 Levi Lane (Elgin OR)

Factory made engine cart: I believe this was made by the Electric Wheel company, don’t know what engine companies used this cart. Rear wheels about 20” in diameter and the front are about 14”, wheels are 2.5” wide. Rails are 54” long and made of 3”x1.5” channel iron. Overall length around 63” and wheels are about 25” apart. The rails are currently fairly close together but can be adjusted to be wider apart. Pretty nice shape and not rusted. Possible delivery to Tulare in April. $500; George Best nnn-nnn-nnnn (Beaverton OR)

Fairbanks 1-1/2 hp, hopper condenser cooler. Needs work - stuck. $250 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks 1-1/2 hp, hopper condenser cooler. Needs work, stuck, $250 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks flywheel mounted clutch (21" diameter 6 bolt pattern), $100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks Morse 3 hp Z engine open crank on very nice homemade cart. Hot R mag has been in storage was running should be easy one to get running. I’ll try if I find time, $500 obo. I can email pics. May trade for Ford TT truck parts; Robert Middleton nnn-nnn-nnnn (Reno NV)

Fairbanks Morse 3hp Z with WICO EK conversion for plugoscillator. Early style 3hp Z and was a runner until I took it apart to paint. Might have lost a nut or bolt over the years and needs to be reassembled. Would be an unusual variation of 3hp Z with the aftermarket conversion, $600; George Best nnn-nnn-nnnn (Beaverton OR)

Fairbanks Morse 6 hp Z. Needs fuel tank, $500; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)

Fairmont railway engine, good compression, $375; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)

Flywheel mounted clutch for large Fairbanks, $100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

IHC McCormick Deering 1-1/2 to 2-1/2 hp LB engine. It was built in 1948 with sn LBA 132177. It is complete, turns over, has belt pulley and new cast iron hopper cover. It was running, but has a cracked spark plug (including a new spark plug, along with a manual, so it should be easy to get it running again). Engine weighs around 200 lb, so local pickup is preferred, but we might be able to deliver depending on location, $350 obo; Dan nnn-nnn-nnnn for details or photos (Tigard OR)

International Harvester LA 1-1/2 - 2-1/2 hp hit & miss engine. Runs great! $500; Mel Pendarvis nnn-nnn-nnnn (Bend OR)

McCormick Deering 2 hp hit and miss engine. Spoked flywheels. Needs magneto, $250 obo; Chris nnn-nnn-nnnn (Camano Island WA)

McCormick Deering M, 1.5 hp., good condition, $600; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)

Sattley 1-1/2 hp hit & miss style, complete with muffler, Wico EK, crank guard and oiler. Runs good, $250; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)

Stover CT3, runs good on skids, $600; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)

Thierry DUX: This is a French hit & miss engine in running condition. Ran the engine the middle of March 2015 after sitting for several years. Can provide video when weather improves. Governor latches exhaust valve open and it coasts a fair number of times between hits. The DUX models are quite rare only a few are known to exist. Unknown HP but is probably a 4hp or 5hp engine. No serial number tag but many of the parts have the number 3 stamped on them. This engine has the cast sub base that another DUX engine I've seen photo of did not. The flywheels are 25" diameter. Based on casting date this is a 1923 engine. Should be able to ship by Fastenal or can possibly deliver to the Tulare CA show in April, $5000; George Best nnn-nnn-nnnn (Beaverton OR)

Vaughn Drag saw, 1927, complete with blade. Should need very little to make it run again, $350 obo; Chris nnn-nnn-nnnn (Camano Island WA)