May 2015 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, restore or for parts w/2 extra tires, $475; Philip Robustellini nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Montague CA)

Allis Chalmers HD5. Very straight original tractor. My uncle bought it new in 1948. Have original books. Straight blade run off PTO. Good undercarriage. Needs head gasket; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)

Allis Chalmers WC High Crop, 1939 first year early, 36" rear tires, single front wheel, complete and restore-able, $2500; Irvin Baker nnn-nnn-nnnn (Ripon CA)

Allis Chalmers, parting out; Buck nnn-nnn-nnnn (Greenville IL)

Bull gear and axle for Case 310 crawler, needs little cleaning up but never used. Probably fit the Case 350 crawler also, $150. Will ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Carburetors: John Deere H, A, Ford and other makes; Cliff nnn-nnn-nnnn (Willows CA)

Case 300 round nose, very nice unrestored tractor complete with Eagle hitch, $1475 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case 530CK loader parts tractor. Selling parts or whole tractor if wanted. Good loader arms, 159 gas engine, torque converter shuttle tranny, loader cylinders, 14.9 x 24 rear tires and wheels. No three point; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)

Case 600 tractor, 1957, needs motor work, $2500; Adrian Kavesh nnn-nnn-nnnn (Sherwood OR)

Case C parting out call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C, excellent complete tractor to restore. Engine free. All tin is good. Tires are in fair condition, $750; Darril Clark nnn-nnn-nnnn (Scappoose OR)

Case C, S or R F&H hc245 Rear round spoke wheels 9x24 very nice and rare, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case CC, 1938, runs good, crank start, fair tires, good metal. A hard model to come by, $2400; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case LA, 1947, new rear tires, new battery, starter, new wood deck. Original flat lens lights. Runs good, would make a great puller; $2400; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case terra track loader complete, $1750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case VAC, 1955, wide (adjustable) front axle, side belt pulley, 3 point (Eagle) hitch, PTO. Excellent sheet metal, starts and runs well. Excellent condition, $2,100; Lou Van Voorst nnn-nnn-nnnn (Milton Freewater OR)

Case VAI 1947 project tractor or parts tractor. Needs a few parts but engine is free and did run. Tires are poor but hold air. Rims are good, $200. Pictures available; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)

Case wide tread tractor, 1936, on full steel, includes set of rubber tires & wheels plus a cultivator, $5250 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar 10, 15 and 22 parts. Too much to list; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)

Caterpillar 15 standard gauge top seat. Good undercarriage and sheet metal. Engine stuck. $2000; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)

Caterpillar 15, 1928, PV1250, new seats, good parade tractor, put up on its supports to adjust tracks in January then lost my storage space so must sell, $1800 obo; Alan Langmuir nnn-nnn-nnnn (West Sacramento CA)

Caterpillar 20 radiator, $200; Buck nnn-nnn-nnnn (Greenville IL)

Caterpillar 46A (D8H) parts: 2 new ripper teeth, track pads, cutting edges, 8 segments, 16 rollers, 6 upper and 12 lower, some new and others 60-80%, $3500 obo; Roxann Fenn nnn-nnn-nnnn (Auberry CA)

Caterpillar 955 Series H, 1966. 95% U/C. 4-in-1 bucket. Rebuilt engine with 933 recorded hours. The steering clutches are very good. This is a very powerful and good machine. Reason for selling we are downsizing, $9750; Bill Standish nnn-nnn-nnnn or xxxx@xxxx.xxx (Rathdrum ID)

Caterpillar D4 Dozer, 1939, wide track, sn 4G285W. Hydraulic straight blade. Runs decent and drives ok, but has been sitting for several years and needs some TLC. Have several manuals and extra filters, $1200 obo; James Libra nnn-nnn-nnnn or xxxx@xxxx.xxx (Enumclaw WA)

Caterpillar split head Thirty radiator tanks and core, make offer; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

Cletrac HG31 crawler, narrow gauge, with dozer blade, fenders, been sitting for years, will turn over, has nice original tag, good tracks, email for pics, $1900 or offer; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Cletrac K, 1920's with steering wheel, has not run in years but motor turns over, does not have the side curtains. Mostly complete otherwise. Pics available upon request. Can ship, you arrange the shipping, $1800; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Cletrac K, engine loose, good undercarriage, belt pulley, nice draw bar, $2500; Irvin Baker nnn-nnn-nnnn (Ripon CA)

Cletrac W, 1919, needs restored, $5000; Buck nnn-nnn-nnnn (Greenville IL)

Collection of original Caterpillar Manuals for early Cat equipment including dozers, graders, loaders, scrapers and others. Approximately 170 books. Would like to sell as a set but may sell individually @ $25.00 each. Will entertain offers as a collection; Don Chappell nnn-nnn-nnnn (St Helens OR)

Collection: Selling tractor collection many old Cats, Ford and Ferguson tractors, all are great shape. D33 D2 stationary. Great shape, call for price; Mel Taormino nnn-nnn-nnnn (Grants Pass OR)

Ensign carbs for Cat 20, 30 all rebuilt, $450. D2-D6 battery box covers with thumb screws, $80. D4 engine side panels, $195 per pair new. D2 track adjuster covers, new, $450 pair; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Farmall A, comes with sickle bar mower, plow, other attachments. Very nice condition, price reduced to $1000 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall F 14. Sn FS45424. Single front wheel. Tires are shot. Tractor is complete except for hood, $400. Also the mowing machine for Farmall F 14. 7 foot bar. Complete except for wood arm. $100. Pto unit that bolts to the back of tractor. Or take all for $400; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Farmall F12 tractor, 1937, runs and drives unrestored but nice original. Tractor has wide front end in good condition, no breaks or repairs, rear round spoke wheels and Kay Brunner after-market front cast steel wheels. Tractor complete, $3500; Bob Gauntt nnn-nnn-nnnn (Vancouver WA)

Farmall F-30 parts tractor, 1939. Mostly there, good hood and gas tank. Inside of engine looks good, no water. Engine won't turn but I think the clutch or tranny has issues. Looking for a decent trade for a newer IH for student FFA projects. Prefer Farmall A to M; Jeff Magill nnn-nnn-nnnn or xxxx@xxxx.xxx (Wheatland CA)

Farmall F-30, 1935, $800; Adrian Kavesh nnn-nnn-nnnn (Sherwood OR)

Farmall H - MD steel belt pulleys, 3 different sizes, $125 each. Can deliver to Medford or Grants Pass OR for slight charge; Roger nnn-nnn-nnnn (Redding CA)

Farmall sheet metal from A to 450 plus a bunch misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super A parts & sickle bar mower, $275; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Super H, 1954, NOS piston sleeve kit, new paint, decals, comes with IH windbreaker, umbrella, belt pulley, 13.6x38 rear tires, runs great, $4600; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super H, 1954. New pistons & sleeves, 13.6x38 rear tires. New paint & decals, belt pulley, IH Windbraker, $4700; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super M motor stuck, great project, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Ford 1950 side distributor 8N rebuilt (1952 engine); Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 800, needs work; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 8N High Crop, 1949, with dealer installed, when tractor was new, high crop option. Bought from original owner. Restored in 1992 and kept in garage. 38" rear tires and 19" fronts. Runs perfect on original 6 volt system. Has Sherman cable shift step down transmission. Many unique options. Can email more photos. Price reduced to sell at $4500; Richard nnn-nnn-nnnn or xxxx@xxxx.xxx (Grass Valley CA)

Ford 8N tractor with backhoe, 1952, 12 vt. Runs good, good tires, $3500 firm; Gene nnn-nnn-nnnn (Jackson CA) [see photos]

Ford 8N, 1947, rebuilt, a model that has 9N & 2N parts, plus the 8N 4speed trans with the small diameter rear wheel lugs of an 8N. Rebuilt engine, 4 ring high dome power pistons, 12 volt conversion. This one still has the experimental long shaft steering column. Large diameter front hubs & wheels, nearly new tires all around; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, 1949, rebuilt; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, 1949, with Dearborn front loader. Runs good, starts easy, very good sheet metal. Loader has hydraulic cylinder on bucket (not a trip). Front pump was replaced and cylinders were rebuilt a few years ago. I've had this tractor a long time and it has been very dependable, $1795; Lee nnn-nnn-nnnn (Crawfordsville OR)

Ford 8N, approx '48-49. Good metal, new rear tires, 11.2x28. Bad motor. $1800 plus implements; Wayne Hay nnn-nnn-nnnn (Molalla OR)

Ford 9N, 1940, with loader, new rear rims and 10x28 tires, rear bearings and seals, engine and transmission great shape, has front end loader and rear scraper blade, front has new bushings, but needs adjusting, located in Paso Robles CA, used in parades and etc., $2750 obo; Nick Sr nnn-nnn-nnnn or Bud Combe nnn-nnn-nnnn (Paso Robles CA)

Ford NAA and Ford 800 small parts available; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford NAA Parts: Transmission, rear end, hydraulic cover, vane-type pump, steering box, front end, radiator, gas tank and many other small parts. Engine not available. Transmission and steering box gone through. Others as came off of tractor. I will be at the Seattle Auto Swap Meet in Monroe WA, May 16 & 17, 2015, stall #601-79 & #601-88. Can email pictures; Tom Dailey nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Fordson tractor high tension Magneto attachment with governor built in. $175; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Grille and side panels, original, for Oliver Cletrac HG crawler, $450. Hard to find piece. Pics available; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Harris Power Horse complete with hyd. blade and gearmatic winch. Call for price; Don Chappell nnn-nnn-nnnn (St Helens OR)

Harris Power Horse, 4 wheel drive, new paint, looks sharp, 2 new tires, other tires very good. 6-cylinder gas engine, $6,500, offer or may trade; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Head (used) in very good shape with the valves for an Oliver Crawler OC4 gas three cylinder engine. Can send pics. $175; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Hood: Brand new reproduction hood for John Deere AOS, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)

International 350 Hi-Utility fast hitch 1 remote runs, $1500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International Cub Lo-Boy. Nearly new rubber (AG-type). Rear weights, chains, International dozer blade and belly rotary mower. All works. Can email photos, $2250; Tom Dailey nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

International Cub Low-Boy, 1955. Runs good, looks good. Fast hitch system, 12 volt electrical. Tires are like new on front, approx 70% on rear. I doubt you'll find a nicer one, $2795; Lee nnn-nnn-nnnn (Crawfordsville OR)

International Harvester Farmall Super M, 1953. Completely restored and is finished in Farmall Red! This absolutely stunning tractor has won several parade awards in the past. It has been stored in the barn and never exposed to the outside elements. It really is beautiful but I've decided I need to clear space in my barn to store additional ranch equipment. Pictures available upon request. The tractor is located in W. Washoe Valley, NV in between Reno & Carson City. It would be nice if the tractor could find a good home to enjoy its excellence, $4,900 obo; Norm nnn-nnn-nnnn (Carson City NV)

John Deere (have 3) tractors: BNH, 1945, electric start, excellent forty-inch rear spokes, good sixteen-inch front spoke wheel. Tires hold air. Hood and grill straight. Tractor runs and drives. Rear hitch missing. One hundred and thirty six thousand plus early styled JD B`s were built, only 446 BNH`s were built. Archives verified as BNH. $3800. Also have for sale 1946 JD BW and 1937 JD A on steel; Bob Gauntt nnn-nnn-nnnn (Vancouver WA)

John Deere 1010 RU transmission, $600 or trade; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere 40 and M engines and many usable engine parts; Don Decker nnn-nnn-nnnn or xxxx@xxxx.xxx (Ridgecrest CA)

John Deere 420 crawler dozer with 4 roller undercarriage. Motor sounds good and drives. Has canopy and Holt winch on back, selling for old friend, winch not working. Call for more details; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 440 C I with 6 way blade $4,000; Jerry nnn-nnn-nnnn (Sandy OR)

John Deere 50 tricycle, loader, 3 pt, perfect tin, comes with JD mower, $3000; Karl Klein nnn-nnn-nnnn (Rainer OR)

John Deere 60 parted out, lots left: crank, head, grill, hood, long rear axles, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 820, 1956, $5,000 obo; Jerry nnn-nnn-nnnn (Sandy OR)

John Deere A (NOS) rear axle, $75; Buck nnn-nnn-nnnn (Greenville IL)

John Deere B, 1938, long frame model, engine rebuilt, good period tires, front spokes very good unstyled tractor ready for paint. Price reduced to $3975 firm; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 styled. Good tin, runs, $1000; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere B, 1948, beautifully restored, new tires, paint, ready for show or parade, $3000; Larry Arkfeld nnn-nnn-nnnn (Yreka CA)

John Deere D pistons, 1 new, 2 used, $100 for all 3; Buck nnn-nnn-nnnn (Greenville IL)

John Deere D, 1935, complete, not stuck. Comes with brand new fenders & hood, very nice old '35 D, $2975; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere GP (NOS) clutch pulley, $250; Buck nnn-nnn-nnnn (Greenville IL)

John Deere GP, 1930. WF on full set of Kay Brunner wheels, restorable; Ed Hedge 208-539- 6514 (Gooding ID)

John Deere GPO parts; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere GPO's, have 3, two with tags and one without, $14,000; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)

John Deere L (NOS) piston rings, $75 pair. Also JD L used engine parts; Buck nnn-nnn-nnnn (Greenville IL)

John Deere L with Hercules engine for parts or whole. Complete. Rebuilt mag, sheet metal excellent. Tires shot. Can ship if needed. Best offer; Sean Moylan nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

John Deere L, 1939? Very straight tractor in running condition. Good tires and wheels. Comes with cultivators, $3975 obo, some trade? Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere LA tractors, have 2, parts or restore, call for prices; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere LA, 1941?. Runs, good shape, $2200; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere LA, 1941?. Runs, new front tires, has plow, good shape, $2500; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere M, 1950. Runs good and looks very good, new tires, $3,000. John Deere MT, 1950. Runs good, has about 10 hours on rebuilt engine, straight sheet metal and good tires, aftermarket 3 point hitch, $2500 or $5000 for both; Mike nnn-nnn-nnnn xxxx@xxxx.xxx (Kingston WA)

John Deere tractors: 1947 BR, sn 337335, show ready with new tires, $5500. 1935 A, sn 416173, $2700. 1946 AW, sn 56223, $2500. 1941 B, sn 118138, $1900. 1946 D, sn 166249, no dents, always in shed, new tires, $2500. 1940 H, sn 19328, excellent shape, new tires, $2900. Miscellaneous plows. All tractors have been stored inside for last 30 years; Doug Magers nnn-nnn-nnnn or nnn-nnn-nnnn. Leave message (Great Falls MT)

John Deere twofer. Two model B's: one is a wide front and the other is tricycle. Both tractors have very nice and straight sheet metal. Both need tires. Two tractors for one package price of $2000; Warren Harger nnn-nnn-nnnn (Central Point OR)

LAMBORGHINI C603L crawler tractor, manufactured mid 1970's. 60 hp 3 cylinder air-cooled Diesel, 3 pt hitch, PTO, swinging drawbar. Approximate weight 6600 pounds. New starter, battery, filters, etc. Undercarriage is in absolutely excellent condition. The low CG makes this unit an excellent hillside tractor. It is ready to work or show. Basically one of a kind especially in this condition, $10,000 obo; Les Martin nnn-nnn-nnnn or xxxx@xxxx.xxx (Valley Springs CA)

Lots of misc parts for John Deere two cylinder crawlers, Oliver OC3s. Call or write for more info or something specific; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Massey Ferguson 35 gas , heavy use all summer, good tires, electronic ignition. $2950; Karl Klein nnn-nnn-nnnn (Rainer OR)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 44 GS in good condition. Tire and sheet metal in good condition, runs, have photos, $1200; Cliff nnn-nnn-nnnn (Willows CA)

Massey Harris 44 GS, runs, good condition, tires and sheet metal in good condition, $1200. Have photos; Cliff nnn-nnn-nnnn (Willows CA)

Massey Harris 81 parts, $200; Cliff nnn-nnn-nnnn (Willows CA)

McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4 parting out: Batwings/engine side panels, orchard belt pulley, hood, shutters, allfuel manifold, exhaust elbow plus misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O-4: Runs, missing orchard sheet metal, $1000; McCormick Deering O-4: very early motor stuck nice, missing orchard sheet metal, $650; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering OS6. Sn OBKS15885. Tires are shot. Complete except for the belt pulley. Pulley gears, control and housing is there, $400; Wilbur Reil nnn-nnn-nnnn (Davis CA)

McCormick Deering rare ODS-6s Orchard diesel, 1 with motor stuck, all complete, and 1 parts tractors. Will sell parts or for pair, $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Minneapolis 17-30 Type B Cross Motor tractor, 1926/27, sn 5712. Runs. New head gasket and valves have been lapped. Pictures upon request, $8400; Bill Standish nnn-nnn-nnnn or xxxx@xxxx.xxx (Rathdrum ID)

Monarch 35 K parting out; Buck nnn-nnn-nnnn (Greenville IL)

New engine parts for Caterpillar 46A (D8H): 3- CAT belts, 2- CAT hydraulic engine filters, 4-NAPA air filters (outer) part #2980, 3-inner air filters, 8-Big A oil filters part# )669) 92133, $500; Roxann Fenn nnn-nnn-nnnn (Oak Hills CA)

Oliver 60 row crop engine, turns over, not running, $350; Jerry Van DeWalle nnn-nnn-nnnn (Yamhill OR)

Oliver 77 row crop, 1949, sn 321315, runs good, new front tires, rear tires 80%, plus live pto, changed to 12volt, good paint, $2000; Richard Findlay nnn-nnn-nnnn (Moses Lake WA)

Oliver 80 Row Crop, 1938. Restored in 1998. Magneto rebuilt 3 yrs ago. Pictures on request, $2650; Bill Standish nnn-nnn-nnnn or xxxx@xxxx.xxx (Rathdrum ID)

Oliver 990 GM diesel 1960 twin stick pto and hyd motor stuck needs radiator and exhaust manifold, $8500 or trade for John Deere 830 electric start; Mark Parker nnn-nnn-nnnn (Albany OR)

Oliver Crawler OC 3 with hydraulic blade and carco drum, $2500; Mert Griffin nnn-nnn-nnnn (Clatskanie OR)

Oliver OC3 crawler, very nice, with manual angle dozer blade and PTO unit on rear, very good undercarriage, starts and runs great. Nice machine for its age in this condition, $3700; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Oliver OC46 crawler track loader with blown Hercules 3 cylinder gas engine, crawler has good tracks, sprocket and rest of machine very good. Engine might be fixable, threw a rod, ripped hole in oil pan and did crack the block. Very nice crawler otherwise, pics available. These were great little track loaders; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Parts for John Deere two cylinder crawlers and Oliver OC3. Will sell all or one piece, I have several rebuilt magnetos and starters for Oliver OC3 and Cletrac HG rebuilt by local shop, your choice on those at a $250 each; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Rims: 2 rear rims for Farmall 200 or whatever else is the same no rust, $325 invested, make offer. Also have 2 tires BF Goodrich 15.5 x 38 25 % tread, $35; Dale Longhurst nnn-nnn-nnnn (Delta UT)

Tire: 14.9x38, $50; Dave Gallant nnn-nnn-nnnn (Boring OR)

Tire: Firestone Field and Road 15.5-38 8ply 80% tread, $350; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Tires & wheels, several sets of 12.4x28 (Ford); Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Tires: 2 Firestone 9-32 tire/wheels, old style tread, fits Case, $450 for the set. 6-30 hay rack tire, 12.4/24,10-28,11.2-28,10-28,9-32,11.2/10-38; Cliff nnn-nnn-nnnn (Willows CA)

Tractor manuals needed? I am going to the Tulare, California Antique Farm Equipment Show April 17-19. I will bring several thousand manuals with me but cannot bring them all. Let me know your needs. If I have it I will bring it; Jim Robinett nnn-nnn-nnnn (Ontario OR)

Tractor seats, cast iron, have 8 of them. Moline, Champion (piece missing), 79 (cracked), K46, 56, and 2 more not marked. $75 each for complete ones, $50 for cracked, piece missing. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Tractor seats: Lots of old vintage tractor seats, some steel, some cast iron, some broken, some not, starting at $25 each; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Weights: Cockshut rear wheel. Tires bar type 23x10.50x12. Turf 23x10.15x12. Bar type 23x8.50x12; Al Barkl nnn-nnn-nnnn (Elko NV)

Wheel weights: 2 sets rear weights for A & B, $100 pair. Can deliver to Medford or Grants Pass OR for slight charge; Roger nnn-nnn-nnnn (Redding CA)

Wheels: IH M & MD cast wheels. Have 5 #355439R1. Good splines in all. $100 each. Can deliver to Medford or Grants Pass OR for slight charge; Roger nnn-nnn-nnnn (Redding CA)

Yanmar diesel tractor-about 17-20 hp Did valve grind but needs rings. Will sell as is $1750 or repaired $2750; Don Chappell nnn-nnn-nnnn (St Helens OR) 2726