Associated Chore Boy 1-2/4 hp, sn 30566 on cart. New ignitor, complete, $750; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Brantford Cub 2 hp, sn78468, no tag. Webster mag and ignitor. Canadian engine built by Goold, Shapley and Muir. Has been painted with primer. Rocker arm bracket has been repaired, $1000. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Briggs & Stratton older 1 cylinder engine, air cooled, Model AP-205 255 101 904, $400 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Cushman Cub Bean Special. Rebuilt Wico mag 3hp throttle governed 800 RPM Model #R20-B. Nice engine tag, sn 73621. Good runner on 4 wheel dolly, $500; Danny Ponce nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Angeles CA)
Empire 5 hp (Rock Island, Alamo) hit & miss engine on original cart, sn 107745 Webster Tri Polar mag. Good runner, $1400; Danny Ponce nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Angeles CA)
Engines: Jeager 2.5 hp hit and miss on homemade cart w/ sprocket for cement mixer w/ Wico EK $650. Novo 4hp on nice skid with buzz coil $750. Alamo Blue-Line 3hp on skid w/ Wico EK and flat belt pulley $600. Fairbanks Morse 6hp Z throttle governed mag fired on nice large steel wheel cart w/ large flat belt pulley $1200. Cushman 8hp two cylinder mag fired on skid with cooling tank $650. All engines run well. Will have all 5 at Woodland Swap in October or can deliver if presold. Call me with questions or if you want photos; Ed nnn-nnn-nnnn (Sparks NV)
Fairbanks Morse 1-1/2 hp headless block with piston & rod and misc. small parts, $80; Tom Street nnn-nnn-nnnn or xxxx@xxxx.xxx (Bend OR)
Fairbanks Morse 1-1/2 hp headless, 1918 #305190. Runs with spark plug and mag. On a cart. Needs gas tank & iron skids, $750; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fairbanks Morse 2 hp T, older restoration of barn find engine, no paint, runs very good, on cart, will be at the Woodland Swap Meet, $2000 or interesting trade; Bob Jones nnn-nnn-nnnn (Fallon NV)
Fairbanks Morse 3 hp model Z, 1920’s, style B, sn C23437 Bosch mag. Made in Canada. Ready for restoration. Always stored inside. $375; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fairbanks Morse 3 hp, 1921, runs, $500 obo; Peggie McMullen nnn-nnn-nnnn (Happy Valley OR)
Fairbanks Morse belt pulley for 15 hp Z engine. May fit 10. Nice condition, $350; Dave nnn-nnn-nnnn (Aurora OR)
Fairbanks Morse FMZ model C, 1944. Enclosed crankcase. Runs, needs gas tank, $275; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fuller-Johnson vertical hit & miss pump jack engine. 1-1/2 hp buzz coil ignition on 4 wheel dolly. New cylinder sleeve & gas tank. Runs good, $1100; Danny Ponce nnn-nnn-nnnn or xxxx@xxxx.xxx (Los Angeles CA)
Galloway 5 hp, 1910. Round rod on original cart. Complete, good condition, ready for restoration, $1800; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Gilson 5 hp, approx. 70% original paint, original muffler, no cracks, breaks or welds, $2000. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Guiberson radial diesel engine, $1000; Vern Fought nnn-nnn-nnnn or xxxx@xxxx.xxx (Exeter CA) (corrected phone number)
International Harvester 1-1/2 - 2-1/2 hp LB complete, runs, $250. Int’l 3-5 hp LB, complete, runs, $375. Both for $600; Richard Hanna nnn-nnn-nnnn (Hayden ID)
John Deere 3 hp E, $1700 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
LeRoi 8 hp 2 cylinder upright on steel wheel cart. Model MH3 in good condition. Has not run since 1995. Set up to run a buzz saw, stored inside, $300; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Marine Diesel Engine: Volvo Penta Mod # AQAD40A, sn 26786 six-cylinder turbo diesel. Has been setting for a few years. Complete through bell housing. Sold as is, $900; nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Rosa CA)
McCormick Deering 1-1/2 hp engine. 1928. Make offer; Chris nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)
Monarch (Nelson Brothers) 7 hp, sn 1378, $1750. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Ottawa 4 hp drag saw engine on cart. Wico mag, runs good, needs gas tank. Broken clutch handle, $450; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Sandwich 2-1/2 hp B18150 project engine, $350; Ray nnn-nnn-nnnn or xxxx@xxxx.xxx (Tucson AZ)
Sparta Copper Economy 4 hp 6” stroke, 4” piston. On cart, no tag. Great condition, $1400. Email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)
Stover 3 hp KE, 1926. Wico mag, on cart. Runs, $375; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Stover 3 hp, complete, not stuck, will run, $475; Don Chappell nnn-nnn-nnnn (St Helens OR)
Stover KC 6 hp, hit and miss, $900; Alan Hendrickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Stover KE 1.5 hp, $450; Alan Hendrickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Vintage Hercules IXA5 four cylinder gas engine self-contained on a skid, has an Onan 6000 watt generator attached to it, engine starts and runs good and smooth, no smoke, needs a gas tank as I used a portable tank to see if runs, do not know if generator works, this unit is clean, looks to of been well taken care of, $500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Wade drag saw engine on cart, no saw frame. Runs, $100. Have other drag saws available (Wards, Sawyer 5001) and blades, too; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Ward 12 hp, sideshaft, hit and miss, $6000; Alan Hendrickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Waterloo Boy 2.5 hp with cracked water jacket, $800; Alan Hendrickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Waukesha 4 cyl gas engine, model FC-16, sn 430599 on cart. Used on Case combine, 1930’s. Good condition. Last used 1995, $300; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Waukesha 4 cyl gas engine, model XA226C, sn 123168, circa 1930’s. One cylinder blown, parts engine pretty much complete, $50; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Western 25 hp, hit and miss, $10,500; Alan Hendrickson nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Witte 4 hp, 1915. Headless on skids. Ready for restoration, $795; Richard Hanna nnn-nnn-nnnn (Hayden ID)