September 2016 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, 1940, sn B47463. New rear tires, new seat, muffler, working tail light and more. Very good paint, both PTO drives, $1200; Al nnn-nnn-nnnn (Tacoma WA)

Allis Chalmers B, sn B108929, 1951 or 1952. Engine overhauled in 1983, 25-28 hrs on new engine, always under cover, bought from original owner in 1980, have original manual, new rear tires and new seat, sheet metal good, runs good, although it has a leaky front seal. Located about 1-½ miles from Cowlitz Prairie Threshing and Gas Show, $1200;  Mike Markle, nnn-nnn-nnnn or xxxx@xxxx.xxx (Toledo WA)

Allis Chalmers CA, 1956, sn CA37320. Electric start, new paint, like new tires, parade tractor, $2700; Dave Zelenka nnn-nnn-nnnn (Perris CA)

Allis Chalmers HD 21, 1963 estimate, serial numbers have been removed. Been parked for 5 years, ran when parked, with dozer and ripper, located in central Nevada, $7000; Richard Dieleman nnn-nnn-nnnn (Las Vegas NV)

Allis Chalmers RC, 1940, sn 5194. Nice tractor, cleaned up, painted, in storage last 10 yrs, ran before storage, fuel drained, and then put away in a side shed; Al nnn-nnn-nnnn (Tacoma WA)

Allis Chalmers U, 1936. Restored 15+ years ago, new tires a $750 value, parked inside, complete, straight sheet metal, everything is free except the engine is stuck, $1500, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Allis Chalmers WC, 1940. Looks and runs good, repainted 8 years ago, $700; nnn-nnn-nnnn, phone calls only (Goldendale WA)

Allis Chalmers WD parts, some new still in box, lot of nice original parts; Mike Cristler nnn-nnn-nnnn xxxx@xxxx.xxx (Zamora CA)

Allis Chalmers WD-45. Older restoration, wide front, recent radiator repair, new water pump, all new gauges, new battery box, rear tires cracked, needs rear tubes, sheet metal and fenders are good, $2195; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

Case 310 dozer. Canopy and winch in good working order, nice crawler, $4250; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case CC, 1938. Runs good, has good metal, fair tires, hand start, all original, $1500; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case D, 1946. Restored 15+ years ago, last started on Memorial Day 2016, sounded great, parked inside, straight sheet metal, decent tires, $2500, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Case DO. Straight metal with light surface rust, no rust outs, PTO, remote hydraulics, good cast grille, eagle claw hitch, $450; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case LI, 1937. Belonged to Drumm Construction, will make great restoration project, with dual rear wheels & 2nd Case L, $750 for both, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Case SC, 1945. Restored 15+ years ago, parked inside, wide front end, new front and rear tires, runs great, drove in July 4th parade, $2500, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Case SC, 1953. Very straight sheet metal, paint oxidized, perfect cast grille, remote hydraulics, eagle claw hitch with equipment down pressure, $850; Warren Harger nnn-nnn-nnnn (Central Point OR)

Case SO, 1947. Restored 15+ years ago, parked inside, started and drove Memorial Day 2016, okay front and rear tires, water pump needs work, $1500, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Case tractors for parts: Have three, Case VA14, $200; 2-Case VAO’s, $200 each; Ron Hunt nnn-nnn-nnnn (Woodland CA)

Case tractors for sale: Have three, Case VAI, hasn’t run in a long time; Case VAO, runs, wide front, tires fair, $600; Case WD45AC, runs, narrow front, tires poor, $700; Ron Hunt nnn-nnn-nnnn (Woodland CA)

Case V, 1940s. Restored 15+ years ago, new front tires, stored inside, straight sheet metal, started and drove Memorial Day 2016, $1500, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Case VAC, 1952, single front, runs good, tires good, $800; Ray Gossett nnn-nnn-nnnn (Hermiston OR)

Case, $2500 obo; located in Silverdale WA, can email pics; Mary Porter nnn-nnn-nnnn xxxx@xxxx.xxx (Salem OR)

Caterpillar 10 parts, $600; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 10 wide gauge. Runs and drives, undercarriage worn. Can email pics, please lv msg, I will call back, $3500; Aaron nnn-nnn-nnnn (Walnut Grove CA)

Caterpillar 10. Not running, not complete, engine not stuck. Can email pics, please lv msg, I will call back, $1000; Aaron nnn-nnn-nnnn (Walnut Grove CA)

Caterpillar parts: Ensign carbs for Cat 20, 30 all rebuilt, $450; D2 track adjuster covers, new, $450 pair; D4 engine side panels, $100; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Caterpillar RD6, 1937, 2H4607W. Farm fresh, original running condition, needs paint, sold the ranch, $3750 obo; Mike McCauley nnn-nnn-nnnn (Turlock CA)

Caterpillar, Swather, and other older farm equipment for sale. Am willing to negotiate on prices; Cindy nnn-nnn-nnnn (Litchfield CA)

Cletrac AD,1937. Restored, sandblasted and painted, good tracks, $2500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2, 1936. Restored, sandblasted and painted, hydraulic Isaacson dozer blade, good tracks, $2900 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac OC-4 engine, 3 cylinder Hercules GO-130, condition unknown, rebuild or use for parts, currently stored in a big wooden box, $350; Don Studier nnn-nnn-nnnn (Corvallis OR)

Farmall B, 1942. Wonderful rust patina, does not run, garden art or parts tractor, you decide, $750; Lindsay Savoy nnn-nnn-nnnn xxxx@xxxx.xxx (Hopland CA)

Farmall C, 1949 parts. All good sheet metal, radiator, two 36” wheels, three 36” tires, narrow front with wheels & tires, extra hydraulic unit, good gas tank, 2 seats with supports, PTO unit, magneto, engine complete but stuck, model B engine complete but stuck. New in box sleeve piston set, $300. Please call with your needs and offers; Russ Shorten nnn-nnn-nnnn (Dayton WA)

Farmall Cub Lo-Boy, 1948, with mounted International 1000 loader, new rear tires with weights, front tires are excellent with weights in hand, rebuilt Quick-Tatch hitch primed and mounted, one bottom plow, homemade 3pt attachment, belt pulley gear box attachment for belt work, new bench style seat, rebuilt mag, new headlights, paint is good, no rust, ditching blade available, loader in excellent shape, protective white paint, everything works, bucket in excellent shape with no dents or bends and with 3 chain hooks, have all manuals plus information on attachments, tractor runs well, photos available, $4500; Bob Folk nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)

Farmall Cub, 1948, sn 13457. Electric start, new paint, new tires, parade tractor, $2000; Dave Zelenka nnn-nnn-nnnn (Perris CA)

Farmall F30, 1936, sn FB15428N. Narrow tread, on round spokes front and rear, rebuilt head, no cracks, runs good, $2150; Bob Jaqueth nnn-nnn-nnnn (Careywood ID)

Farmall M fenders, $250; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

Farmall M. Tall tractor, gas, gear type drop boxes, 20” single front, engine free but not running, stored inside, good sheet metal, usable tires. Will make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall MD. Runs well, good rubber, live hydraulics, belt pulley, Behlen power steering, sheet metal is good. Located in Redcrest CA, $2750; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall O-12 parts tractor carcass, parts or all of it; also have a semi complete O-12 tractor, engine stuck, missing hood and tops of the fenders, $500; Larry nnn-nnn-nnnn (Phelan CA)

Farmall OS4,1948, sn OBHS 19555WI. New tires front and rear, rebuilt carb, runs good, $2150; Bob Jaqueth nnn-nnn-nnnn (Careywood ID)

Farmall Super C.  Good original condition with strong engine and good sheet metal.  Includes both single narrow and wide front axle, aftermarket cultivator frames front and rear. Located in Redcrest CA, $2000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall Super C. Single front wheel, not running, not stuck, one rear tire near new, sheet metal fair to good, $600; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

Farmall Super H, 1954. Excellent running, restored 3 years ago. McCormick #8, 2-14, rope trop plow, restored. Tractor and plow very good rubber, $2500 for all; Al Barkl nnn-nnn-nnnn (Elko NV)

Farmall Super M, 1950s, sn F-10577 DJ. Runs well, fair condition, tires 50%, has weights, $1000; Ed DeVaul nnn-nnn-nnnn (McArthur CA)

Farmall Super M, 1950s, sn F-24685 GJ. In excellent shape, like new tires, rims & weights, 3pt hitch, live hydraulics, $1800; Ed DeVaul nnn-nnn-nnnn (McArthur CA)

Ferguson TO-20; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Fiat 805 crawler with blade, for parts, $500; Bill Bartlett nnn-nnn-nnnn (Cotati CA)

Ford 2N grille, in excellent condition, $125; Ford belt pulley, $50; Mike Moran nnn-nnn-nnnn xxxx@xxxx.xxx (Olympia, WA)

Ford 2N parts tractor. What do you need? No rear wheels or tires; George nnn-nnn-nnnn (Albany Oregon)

Ford 2N, 1946. Strong engine and transmission, new brakes and seals, starter and generator rebuilt and converted to 12v, recent fuel system and ignition tune up, new oil and filter, excellent rust-free sheet metal, hydraulics strong, but drift down, $2500; Mike Moran nnn-nnn-nnnn xxxx@xxxx.xxx (Olympia, WA)

Ford 8N, 1949, with loader, $3500 obo; located in Silverdale WA, can email pics; Mary Porter nnn-nnn-nnnn xxxx@xxxx.xxx (Salem OR)

Ford 8N, restored. Original rubber, newer paint, lights, front bumper, sn 177. Very, very nice, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N. Completely restored inside out and front to back, new paint, new headlights, new hood, email for pictures; Floyd Ragsdale nnn-nnn-nnnn xxxx@xxxx.xxx (Sun Valley NV)

Ford 9N, 1941. Mechanically sound, good bones, new radiator, new distributor, engine turns over, stored inside for 15 years, running when parked, minimal work to make run, too nice for lawn art, $1000; Lindsay Savoy nnn-nnn-nnnn xxxx@xxxx.xxx (Hopland CA)

Ford 9N, 1941. Straight and runs good, with extra 8N front wheels and hubs, will txt pics, $950 obo; Brad Campbell nnn-nnn-nnnn (Ukiah CA)

Ford 9N, smooth rear axles with good drums & bearings, $500 pair; front wheel weights, $200 pair; interchangeable brake pedals, $150 pair; rear wheels $100-$150, no shipping; Dennis McClain nnn-nnn-nnnn xxxx@xxxx.xxx (Redwood Valley CA)

Ford engines: Ford 9N industrial; Ford 2N; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford Ferguson 2N, 1947. Running, complete, not restored, rust free, 50% tread on tires, 5ft blade mower, $2200 obo; John Dornbusch nnn-nnn-nnnn (Brookings OR)

Ford Model T tractor conversion, 1924, rear rims are 4’ high, comes with another complete drivetrain, plus extra starters, water pumps and more, in running order.  Featured in Antique Power magazine Nov-Dec issue of 1998. $5000 obo; Thomas Bastian nnn-nnn-nnnn (Cave Junction OR)

Ford tractors; Ford 8N. Sherman transmission; Ford 8N. Rebuilt, .090 over high dome 4 ring piston, like new rubber; Ford 860; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Fords: 2N, 1942; 8N, 1949; two 8N’s, 1951; 740, 1955; 641, 1958. All fully restored and well optioned, $3000-$5000; Dennis McClain nnn-nnn-nnnn xxxx@xxxx.xxx (Redwood Valley CA)

Harris Power Horse 1938. Made in Salt Lake City, UT, $11500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Harris Power Horse tractor, maybe 1953. Tires new or near new, 4-wheel drive, $5500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Hubs: John Deere B NOS cast iron front hub caps, $40 pair; Buck Evans nnn-nnn-nnnn (Greenville IL)

International 300. Economy modified pulling tractor. Has a Chevy 350 engine modified with pistons, heads, 4-barrel intake and dual exhaust stacks, rear tires cut and near new fronts. Built to Valley Tractor Pullers Association rule specifications, pulls in 4500lb class, has won some and of course lost, but what fun it is to pull with, puts on a good show, $2850; Dick Glover nnn-nnn-nnnn or xxxx@xxxx.xxx (Gardnerville NV)

International Cub, 1966, industrial model; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

International I-4, 1948.  Older refurbishment including engine overhaul and new clutch. Paint is oxidized, engine is free and ran well when parked, straight sheet metal, excellent tires front and rear, less than five parade hrs since refurbishment, $1950 obo; Will consider serious offers on either or both, see Massey Harris 44 ad also, lots of enjoyment  for much less than one can be built from scratch Dick Glover nnn-nnn-nnnn or xxxx@xxxx.xxx (Gardnerville NV)

International M, 1950-51. Front end loader, PTO, 3-pt, hydraulics, $2300; Geri Harrison nnn-nnn-nnnn (Riley OR)

International M, motor stuck, comes with a good motor, tricycle gear, $750; Richard Parker nnn-nnn-nnnn (lv msg) (Lind WA)

International T6 late model. For parts only, engine stuck through final drive sprockets only. Located in Redcrest CA, $1000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

John Deere 1940's era. Have four, John Deere A, sn 547766, in original condition; John Deere H, sn 17014, JD L, sn 640082 and JD LA, sn 1795, all three restored; Patty Marsh nnn-nnn-nnnn or Brian Wilson nnn-nnn-nnnn (Centralia WA)

John Deere 40 crawler for parts. Engine is out of machine and apart, track chain is not good but pads are, tracks are on machine and machine will roll, good sheet metal, block looks very good and crank has been turned, no blade, crawler is an early 40 model and has the MC and Lindeman rollers, will ship if you arrange, I can load, sell parts or will sell all for, $675; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 40U, 1953. Has orchard fenders and exhaust, restored and painted in 2006, new tires all around, front weight, new price, $6900; Jim Marchiando nnn-nnn-nnnn (Santa Barbara CA)

John Deere 420 crawler. Has Holt Hydraulic tilt blade, starts and runs good, needs water pump rebuilt, needs work on steering on one side, crawler is a long track 5 roller, engine does not smoke and has good oil pressure, good sheet metal, tracks around 60-70%, very fixable and or restorable machine with original tag. Can ship but you arrange and I will load; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 420U, 1957, sn 106102. Restored, wide front, 4 speed, PTO, new tires front, 80 to 90% rear, rear wheel weights, 3-pt with correct 3rd link, 4-year-old paint job with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all paperwork, runs and drives good. With restored 415-A 3-pt integral, 2-14 bottom, plow, new Tyler Buchheit points, extensions and trash boards. Bottoms are soft painted when not in use. Nice original set up, $5500; Bob Folk nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)

John Deere 60 tractors: one mostly complete, not running, fair tires, $600; second one, poor tires and rims, mostly complete, $400, can email or text pics; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere 620. Narrow front, newer tires, good condition, $4300; LB Brown nnn-nnn-nnnn (Scio OR)

John Deere 80. Newer tires, fender extensions, good condition, $7300; LB Brown nnn-nnn-nnnn (Scio OR)

John Deere A, 1950-51. Wide front end, PTO, 3-pt, hydraulics, two new rear tires, $2200; Geri Harrison nnn-nnn-nnnn (Riley OR)

John Deere A, 1951, orchard. Running tractor ready for restoration, $2000; Mark Walton nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

John Deere AO, unstyled. Engine free, on rubber for restoration, $1750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1935, unstyled with brass serial tag; John Deere A, 1948, wide front end, and new front tires; John Deere B, 1941, $4000 obo; located in Silverdale WA, can email pics; Mary Porter nnn-nnn-nnnn xxxx@xxxx.xxx (Salem OR)

John Deere B, 1937. On steel front and rear, $1600; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)

John Deere B, 1938. Long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1943. Hand start, on steel with rubber tread, lugs included, restored 2012, $3500 obo; Dave Wattenbarger nnn-nnn-nnnn xxxx@xxxx.xxx (Bonners Ferry ID)                                    

John Deere B, 1948. Nice tin, fair tires, complete, engine stuck, $600 obo, can email or text pics; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere B, 1952. With forks, runs and drives, $2000; Jason nnn-nnn-nnnn (Mulino OR)

John Deere B, unstyled/styled parts: BN pedestal front wheel, $600; round spoke rear wheels, decent condition, $1000 pair; lots of engine and transmission parts, and more, email or text with needs; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere BN, 1946. Electric start, complete, engine turns over, rare slow speed transmission option, fair tin, $800 obo, can email or text pics; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere BN, styled, mid 1940s. Mostly complete but has had modifications to hood and seat, $500 obo can text or email pics; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere BO Lindeman crawler, 1945. Rebuilt magneto and carb, starts and runs well, has Lindeman hydraulics and blade but cylinders are shot, has row crop gas tank and is missing right foot rest, blade is not attached to tractor but comes with it, good running, driving, restorable tractor, $4650 obo; Bob Hunt nnn-nnn-nnnn (Red Bluff CA)

John Deere BW, 1951. Mostly complete, 42” rear wheels, can text or email pics, $1100 obo; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere D hood, 1941, may fit others, $125; Hubert Bierly nnn-nnn-nnnn (Bend OR)

John Deere D Unstyled. New front tires, spoked front wheels, parked inside, complete, straight sheet metal. Restored 15+ years ago, $6000 obo, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

John Deere D, 1935. Complete, not stuck. Comes with brand new fenders & hood, very nice old '35 D, $2500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1941 styled D. Sheet metal very straight, paint is good except oxidized, $3500; Warren Harger nnn-nnn-nnnn (Central Point OR)

John Deere D, 1941, $5000 obo; located in Silverdale WA, can email pics; Mary Porter nnn-nnn-nnnn xxxx@xxxx.xxx (Salem OR)

John Deere D, 1944. Engine loose, new front tires, $1200, in Portola CA; John Wren nnn-nnn-nnnn (Fallon NV)

John Deere D, 1947, with new front tires; John Deere 60, 1956 wide front end, power steering, all tractors have good tires, have been shedded and sitting 2-8 years, the A, B and D need carburetors cleaned; Dennis nnn-nnn-nnnn (Missoula MT)

John Deere D, styled. Complete but engine stuck, $2500 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere G flywheel, F681R. Excellent splines, $225 obo; G crankshaft, AF242R. Excellent condition, $400 obo; Dave Wattenbarger xxxx@xxxx.xxx nnn-nnn-nnnn (Bonners Ferry ID)

John Deere GP, 1929.  Rim extensions with brackets, extra wheel lugs, and new aftermarket fenders. Wide front end, runs good, original paint. Also with it is a #44 JD 2-bottom plow on steel, which plows very well, $5100 for both, obo; John Loder nnn-nnn-nnnn or xxxx@xxxx.xxx (Redmond WA)

John Deere GP, 1929. Lugs removed, bolted rubber on front and back rims, not running, $3500; LB Brown nnn-nnn-nnnn (Scio OR)

John Deere GP, 1931, orchard, #27 of 225. Very nice running and looking tractor, $18500; Mark Walton nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

John Deere LA, 1946, sn 11414. Electric start, new paint, new tires, parade tractor, $2500; Dave Zelenka nnn-nnn-nnnn (Perris CA)

John Deere left rear fender for 7420 or 7520, may fit others. In very good shape, you haul, $225; also misc JD parts for 20, 30, & 40 series; Carol nnn-nnn-nnnn (Keno OR)

John Deere M, 1947, sn 12102. New paint, new tires, very good parade unit, $3600; Dave Zelenka nnn-nnn-nnnn (Perris CA)

John Deere M, 1948. Runs good, older restoration with good paint, sheet metal, and tire, $2500, email for pics; John Boehm nnn-nnn-nnnn email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere M, 1952. Good condition, period rear tires, $4300; LB Brown nnn-nnn-nnnn (Scio OR)

John Deere M parts: drawbar, $160; final drive both left and right side, $150 each; console, $75; implement drawbar clamps, have 3, $110 each; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

John Deere parts: New brake band and a rear belly pan for a 440 crawler; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere M parts: torque tube, $75; Powr-Trol lift, $160; cast iron front rims 15”, $75 each. Whomever buys parts listed in my 2 Iron Trader ads month of September gets pallet of misc parts for free; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)

John Deere tires and rims, mounted, size 8.3x24, 80% tread, 8-hole rims, have four, $200 firm; JD tires and wheels size 12.5x38, have two, $150; Ed Bring nnn-nnn-nnnn (Molalla OR)

John Deere tractors: have five, various ages, one location in California.  JD D, 1942, not running, one rear tire shot; JD 40U, 1955, not running, fair rubber, wont roll; JD D, 1948, one rear tire shot, ran when I brought it home; JD D, 1928, has run, some work done, K. Brunner wheels; JD GP, 1929, hasn't run since I owned it, poor rubber, $5000 obo for the lot; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)

Kubota hood: Near new hood for Kubota B2350 and BX1860, $100 each; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L245, L295, L2800 and B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Ferguson 97 Wheatland diesel, 1963. 93hp, 23.1-26 rears, 9-24 fronts, front wheel assist, no cab, one remote, good sheet metal, not running, $2900 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Massey Ferguson 97, Wheatland, diesel, 1962. 93HP, 18.4-34 rears, 9.5-24 fronts, front wheel assist, shop built cab, 1 remote, good sheet metal, running condition, $3900 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Massey Harris 20. Single front wheel, runs, wrong engine, replacement rear tire needs a tube, no side panels, fenders good, grille good, hood OK, $500; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

Massey Harris 30. Narrow front, sheet metal rough, fenders good, rebuilt engine ready to install, has possibly .030 aluminum pistons, replacement rear tire needs a tube, $1000; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

Massey Harris 33, 1950-51. Power steering, PTO, 3-pt, hydraulics, $2500; Geri Harrison nnn-nnn-nnnn (Riley OR)

Massey Harris 44 chassis powered with a Cadillac 500 coupled to a turbo 400 automatic to the tractor transmission.  Economy modified pulling tractor. Engine has Keith Black pistons, Cad Company valve train, aluminum intake, Holley carb, dual stacks and electric fans, cut rear tires and new fronts. Also complies with Valley Tractor requirements, ROPS set up, a good puller in 6500 lb class that has won its share, $3950. Will consider serious offers on either or both, see International 300 ad also, lots of enjoyment  for much less than one can be built from scratch; Dick Glover nnn-nnn-nnnn or xxxx@xxxx.xxx (Gardnerville NV)

Massey Harris 44 diesel, 1953. Restored 15+ years ago, parked inside, started up July 4th and sounded great, new front tires, $2750, pics upon request; Steve nnn-nnn-nnnn xxxx@xxxx.xxx (Fallon NV)

Massey Harris 55 Diesel, $2000; Mark Walton nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)

Massey Harris Pony parts: front axle, frame, transmission, rear end, two rear wheel center disks, no rims, motor, or tin work, $100 for all; John Lang nnn-nnn-nnnn (Monmouth OR)

Massey Harris, 1953, pony. Has been rebuilt from the ground up, new starter generator and paint, everything works, even the 2-point on back, also have one for parts, $2300 for all obo: Don nnn-nnn-nnnn (Grants Pass OR)

Massey Harris, Senior 101. Parade ready, $2500 obo; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)

McCormick Deering T20 parts crawler, T20 engine parts, fuel tanks, etc., prices vary but will be fair; Larry nnn-nnn-nnnn (Phelan CA)

McCormick WD-9. Runs good, big rubber, good puller, painted green.  Located in Redcrest, CA, $2500; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Minneapolis Moline 445 Universal, 1956. Gas, 38hp, 13.6-38 rears, 16” fronts, no cab, 2 remotes, 3point, 540 RPM PTO running condition, $3300 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline 445 utility, 1956. Gas, 38hp 14.9-28 rears, 6.50-16 fronts, 3 point, 2 remotes, 540 PTO, good seat, front cross broken. With Minneapolis Moline model S43 hydraulic front loader, 44” bucket, $3200 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline 705 Wheatland Diesel. No cab, 13.4x34 rear tires, good condition, runs excellent, sheet metal is straight except for some minor damage to the back of the rear fenders, can email photos, $3750; Bret nnn-nnn-nnnn (txt ok) or xxxx@xxxx.xxx (Vancouver WA)

Minneapolis Moline G. Gas, clamshell fenders, sheet metal in excellent condition just needs paint, can email pics, $2295; Bret nnn-nnn-nnnn (txt ok) or xxxx@xxxx.xxx (Vancouver WA)

Minneapolis Moline G1000, 1966. Wheatland diesel, 105hp, 18.4-34 rears, 1100-16 fronts, factory cab with all glass, 4 remotes, ample torque, good sheet metal, duals, $3900 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline GVI, 1960. Diesel 68hp, 23.1-34 rears, 7.50-18 fronts, cab with all glass, good sheet metal, 2 remotes. With 9ft Cancade hydraulic, two-way, front blade, $3200 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline ZAN, 1949. Not running, engine stuck, mostly complete except missing starter and carburetor, hood has typical rust, needs one rear tire, has two rear wheel weights on each side, parts or possible restoration, as is, $400 obo; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline ZAN, sn C 080 0494. Engine model 206B-4, sn 595. Single front end, tires around 80%, sheet metal straight, has been recently painted, runs good, $2800; Don Studier nnn-nnn-nnnn (Corvallis OR)

Minneapolis Moline, 4 Star, 1950-51. Front end loader. PTO, 3-pt, hydraulics, one main rear tire, $3500; Geri Harrison nnn-nnn-nnnn (Riley OR)

Oliver 60 row crop. Factory wide front very rare, mounted cultivator mostly complete, good B marked block that needs to be restored, no sheet metal or rear rims, buy whole tractor for $750, that is less that wide fronts bring; Ron Hunter nnn-nnn-nnnn (Puyallup WA)

Oliver 60, row crop. Engine turns over not running, $375; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Oliver 77 row crop with Farm Hand loader and Oliver 720 twine baler. Everything runs and works, would make excellent show stopper with a little sprucing up or you could bale hay cheaply for a few cows, $2500 for the set; Roy Hofer nnn-nnn-nnnn (Canby OR)

Oliver HG 72. Very straight condition, engine locked up, good undercarriage, very nice tractor, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)

Oliver HG, 1951. Crawler has not run since 1989 but was put away running. Four cyl flat head gas engine, engine still turns over, steering clutches still work, has been stored under a cover since 1989, the tracks turn easily when I pulled it from where it was parked, $1500 Canadian obo; Jack Taylor nnn-nnn-nnnn or xxxx@xxxx.xxx (Abbotsford B C)

Parting out: Massey Ferguson 65 gas, Deutz 4005, Oliver 77 gas, Allis Monarch 35K crawler, Minnie M5 diesel; Buck Evans nnn-nnn-nnnn (Greenville IL)

Parting out: Massey Ferguson 65 gas, Deutz 4005, Oliver 77 gas, Allis Monarch 35K crawler, Minnie M5 diesel; Buck Evans nnn-nnn-nnnn (Greenville IL)

Parts: Caterpillar 10 parts, $600; Buck Evans nnn-nnn-nnnn (Greenville IL)

Pulley: John Deere A NOS clutch pulley, $300; John Deere A and B flywheel wrenches, $80 each; Buck Evans nnn-nnn-nnnn (Greenville IL)

Pulley: John Deere A NOS clutch pulley, $300; John Deere A and B flywheel wrenches, $80 each; Buck Evans nnn-nnn-nnnn (Greenville IL)

Rims: 10”, 11”, 28”, 6 lug rims; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Rims: Rear rims, brand new blank rims, 10x38 and 11x38, no lugs or mounting rings, perfect for welding in spoke centers, $100 pair; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Scoopmobile loader. Bucket has been removed and has a crane with extendable boom, 250 Chevrolet engine and powerglide transmission, runs and moves forward, reverse isn’t working, will pick about 4000 lbs, $600 obo; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Starters & air cleaners: several starters and magnetos for Oliver OC3, OC4 and Cletrac HG models, many have been worked on by a professional years ago, $225 each, also have starters for John Deere two cylinders from MC to 430 models, some just cores some have been rebuilt, starting at $75 each and up, air cleaners and crossover pipes for the Oliver OC3, Cletrac HG, also several air cleaners for the John Deere MC, 40, 420 crawlers; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Tires: Two 13.6”-26”, on flat spoke rims, 6-hole bolt pattern, $200 each; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: Two 13.6”-28”, 40% tread, $100 each; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: Two 16.9x28 tires, like new, with tubes; usable, 12x28; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Tires: Two tractor tires, 11.2x38 mounted on John Deere 9-hole rims, $300; Ron Hunt nnn-nnn-nnnn (Woodland CA)

Trailers: John Deere farm trailer, 16ft bed, side racks, new wheel bearings, new tires, and seals, hitch on back, $2500 firm; 20ft flatbed trailer, 82” inside wheel wells, headboard, spare tire, $2250 obo; 16ft flatbed trailer, beaver tail, ramps, 7000lb axles, needs work, $600 firm; Phil Wall nnn-nnn-nnnn (Enumclaw WA)

Various antique tractors between 1930s and 1950s, Allis Chalmers, Case, Farmall, John Deere, McCormick-Deering, Minneapolis-Moline, MM-Twin City. Most restored 15+ years ago and ran when restored, some have recently started and drove, those that ran need battery and fresh and clean fuel, started getting them into running condition, pics upon request; Steve nnn-nnn-nnnn or xxxx@xxxx.xxx (Fallon NV)

Wheel weights: Allis Chalmers French-Hecht rear wheel weights for round spoke rear wheels for WC tractor, approx 120 lbs each, $80 pair; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

Wheels and tires: Pair front wheels and tires for Oliver, White or other 750X18, 6 hole, $125; Also nice pair 9N front wheels with large bolt pattern 16” $40; George nnn-nnn-nnnn (Albany OR)