September 2016 - Misc. For Sale

All Classified Ads

3-pt equipment: One disk, 7ft, 3-pt, $500; One Howes rotary mower, 6ft, 3-pt, $400; John Deere Graymor 205 rotary mower, 5ft, needs work, $400; Howard rototiller, 4ft, $700; Ron Hunt nnn-nnn-nnnn (Woodland CA)

ARPS Trench Devil trencher. Perfect for landscapers, has Robins engine, complete and looks good, but not currently running, can load on your truck or trailer, email for pics; John Boehm nnn-nnn-nnnn (email preferred) rustyacres@ yahoo.com (Woodland CA)

Backhoe attachment for Skid-Steer loader (Bobcat), model 909, 8-way hydraulics action, $4900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Backhoe attachment for Skid-Steer loader, Bobcat, 8-way hydraulics action. Made by Case, Model 100, $2100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Black walnuts, washed and ready to be cracked, 5 lbs for $15 plus shipping; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Blades: Buzzsaw blades have 10 round. Saw mill blades from approx 24” to 30” diameter, good for yard art or artwork, $300 takes all. Several drag saw and two man saw blades, all for $150; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)  

Boat engine: Chevy 4-cylinder boat engine, short block; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Brake: Hand operated brake for light gauge sheet metal up to 12” wide. In operating condition, manufacturers name is too faded to read, likewise seal of state, perhaps Michigan, is only partially readable. Operating hand lever can be used on either the right of left side. The brake is mounted on a sturdy metal stand 33-1/2” high with two metal shelves 11-1/2” x 17-1/2”, $100 obo; Ed Ristow nnn-nnn-nnnn (South Pasadena CA)

Brush Hog rotary mower. 6', PTO drive 540 RPM, 3-pt mount. good condition, make unknown. This is a big heavy duty mower, $850 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Burr mill: 6” burr mill grinder, no name or model, similar to a Little Wonder.  Good shape, one broken ear on part of the base, bolt mount still okay, $75; Burt Brennan nnn-nnn-nnnn (Nampa ID)

Burr mill: Diamond 8” burr mill with feed shaker, Model D, sold by Mitchell Lewis & Staver, Portland, OR.  No CBW’s that I can see, all original, original paint, includes good 3-1/2” belt, $30; Burt Brennan nnn-nnn-nnnn (Nampa ID)

Combine: McCormick 64 pull type, engine driven Combine.  7' header, good feeder canvas, some belts replaced, some parts taken off and stored inside.  Engine is a Farmall A engine which has been completely redone with help from major engine shop in Spokane, never started.  Have instruction and operation manual. Good restoration project, $1200; Florian Nordhus nnn-nnn-nnnn (Connell WA)

Corn planter: John Deere 2-row 3-point planter needs repair, $75; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Drag saw: Vaughn drag saw, very nice, $295; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)

Dragon Fly air drive outboard. 32" propeller, made by Robertson Hedge Inc. Kansas City, Missouri.  Mounts like out board motor on either a boat or iceboat.  Comes with 3 runner ice boat, not running, but engine is free and has compression, $750; Jim & Mary Jensen nnn-nnn-nnnn (Canyon City OR)

Emerson Kicker dockage tester, complete, works good, includes belt, $300; Burt Brennan nnn-nnn-nnnn (Nampa ID)

Farmall Decals. Complete sets of the correct decals for the Regular, F-20, F-30, F-12/14, sets start at #58. Partial sets for the W-series, O-series, and I-series. These are commercial grade vinyl decals with a UV protective coating. Pics available by email; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood, CA)

Feed grinder manufactured by Colfax Machine Works, Carley #4, $850; Fanning mill excellent condition, $450; Early horse drawn manure spreader, $350; antique buggy and car parts; all sizes of steel wheels, $20-$150; Richard Parker nnn-nnn-nnnn (lv msg) (Lind WA)

Foley lawnmower sharpener, model 388, with lift, great condition, price reduced to $350 obo; Jim Lovelace nnn-nnn-nnnn (Bend OR)

Ford 3-pt back blade, 6’ wide; $300; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Forklift: Hyster 60 Boxcar special forklift. No brakes, hard rubber tires, no side shift, 10' mast. Now the good parts, newly rebuilt engine by West Bearing Inc. in Portland OR, new starter, new 12v alternator, new battery, very good paint, propane with full extra tank. Very nice lift truck, $1975 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Front end loader: Westendorf TA76, 8’ bucket, complete, loader is rated for tractors up to 140hp, $1650 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Gas pump & motor oil signs; Wayne 80 vintage gas pump. In very good condition, hose and nozzle, displays very nice, $850; Gilbarco Calco gas pump. In very good condition, $850. Also 1939 Esso Motor oil signs, painted tin, large, approx 6’L X 3’T, two different versions, $500 each; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Gas Pump: Old Skelly gas pump, have not used but was said to be operational when I got it, OK condition, $350; Jerry Walusiak nnn-nnn-nnnn (Lebanon OR) Gas pumps: One Bennett, model 766, spec 766 1060. One Wayne model 80, sn 87748. Both complete with pumps; Brian nnn-nnn-nnnn (Centralia WA)

Generator Signal Corps radio power, battery charger, new with tools and spare parts, $250; Bill Bartlett nnn-nnn-nnnn (Cotati CA)

Generator: MITM 8KW gas portable generator, USA made, new, $800; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Grader blades: 3-point angling grader blade. 3-way adjustment blade, angle, tilt, and swivel, in good working condition, $250, can load on your truck or trailer, email for pics; John Boehm nnn-nnn-nnnn (email preferred) xxxx@xxxx.xxx (Woodland CA)

Grader: Adams road grader. On steel wheels, nice original grader, blade measures 11' 10" wide, grader is 9'3" wide by 31' long, can email pics, $1500; Lauren Langdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Buhl ID)

Grader: Caterpillar road grader, sn 8H962. On rubber wheels not original, grader is a pull type with on-board engine to power the grader, blade measures 9' 8" wide, grader is 9' wide by 28' long, can email pics on request, $1500; Lauren Langdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Buhl ID)

Grist mill and corn sheller, both flat belt driven; Clifford Bartyzal nnn-nnn-nnnn or xxxx@xxxx.xxx (White City OR)

Hacksaw: Flat belt power hacksaw, Millers Falls patent date 1893, good condition no breaks or welds, $475; Mark Bruto nnn-nnn-nnnn (Placerville CA)

Heater: kerosene, will heat 1800-2000 sq. ft., new in box, monitor #422, $400; Al Barkl nnn-nnn-nnnn (Elko NV)

Heavy duty 4’ box scraper made by Modern category 2 hitch, used very little $300. Heavy duty 6’ rear boom, category 2 hitch $75; Russ Shorten nnn-nnn-nnnn (Dayton WA)

Implements: Dump rake, Van Brundt seed drill and IHC thrasher. These are in vintage condition, ready for restoration or yard art; Patty Marsh nnn-nnn-nnnn or Brian Wilson nnn-nnn-nnnn (Centralia WA)

Implements: Grain drill, $500; Fertilizer spreader, $500; Pipe trailer & 4” main line 50+ pieces, $2000; Belt driven chopper, $500; Grader blade, $300; Hay grappler, $300; Geri Harrison nnn-nnn-nnnn (Riley OR)

Ingersoll Rand engine driven twin cylinder air compressor. 4-cylinder gas Waukesha engine with a casting date of 1926. Magneto and carburetor included, engine turns over, water jacket cracked, for parts or repair, radiator appears to be in nice shape, can email pictures on request, $650 obo; Lauren Langdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Buhl ID)

Jaw Crusher 4x4, Samson, assay crusher. 16" flywheel, 12" pulley, can be run by an engine or manually. This is a break-down crusher that can be taken apart and transported easily, all the parts are numbered, $2500; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Jaw Crusher 8x8, Golden State Ironworks, San Francisco. Heavy crusher, flywheels 32" diameter, 22" pulley wheel, weights approx. 2-ton, very good condition, turn-of-the-century era, $3000; Ron Ludford nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

John Deere 45 loader. Nice original condition, newer hoses and plumbing, all mounting hardware and brackets, $200, can email pics; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)

John Deere 55 3-bottom trailer plow. Needs tires, one coulter doesn't match, one lever missing, $325; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

John Deere 760 self-loading scraper.  Runs, hydraulics work, ready to load on your lowboy or hauling can be arranged.  9-1/2yd capacity, has some needs, but you will have all the attention at the next earth moving event!, $5500 obo, pics on request; Danny nnn-nnn-nnnn (preferred) (lv msg); Jon Rodgers nnn-nnn-nnnn (Sonora CA)

John Deere 9 mower, $35; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

John Deere CC cultivator. Needs tires, $325; Don Young (lv msg) nnn-nnn-nnnn (Pearblossom CA)

John Deere implements: Manure spreader, $1200; brush hog, $1200; box scraper, $800; 2-bottom roll down plow, $800; disk, $800; rare metal wheel Shank Subsoiler, $1500; Geri Harrison nnn-nnn-nnnn (Riley OR)

John Deere no. 5 mower. Complete in nice condition, $200. Also have disassembled no. 5 mower with lots of extra parts, $200, or take all for $300, can load on your truck or trailer, email for pics; John Boehm nnn-nnn-nnnn (email preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere pressure washer, Model A40 on original cart, 3HP electric Leeson motor frame G184T continuous duty, $200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere trailer, #16 dual wheels, new tires, rims  blasted, painted, bearings packed, winch, deck needs floor and side rails repaired, $750, located in Priest River ID; Dave Wattenbarger nnn-nnn-nnnn or xxxx@xxxx.xxx (Bonners Ferry ID)                                          

John Deere weights, 80lbs each, have 19, $50 each; located in Silverdale WA, can email pics; Mary Porter nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)

Land plane and older farm equipment for sale. Am willing to negotiate on prices; Cindy nnn-nnn-nnnn (Litchfield CA)

Lathe: Small Atlas lathe, has 3 jaw and 4 jaw chucks, needs a new lead screw, $100; John Lang nnn-nnn-nnnn (Monmouth OR)

Loader for Massey Ferguson or Ford type, hydraulic tilt, $350; Ron Hunt nnn-nnn-nnnn (Woodland CA)

Log splitter, Brave Industries, 8hp B.S., $600; Ron Hunt nnn-nnn-nnnn (Woodland CA)

Manuals: Lots of literature for tractors, combines, equipment etc.; Richard Parker nnn-nnn-nnnn (lv msg) (Lind WA)

Maytag washing machine, 1930’s. Has gas engine, complete with extra mufflers and exhaust pipes, carbs, and oil cans marked Maytag, $350; Thomas Bastian nnn-nnn-nnnn (Cave Junction OR)

MC-1000 tool carrier. No attachments or implements, just the tool bar and mounting brackets, hydraulics are available. It is in semi-rough shape, no adjusting screws, some dings and scratches, sway assembly is in good shape, please text for more info; Travis Hockel nnn-nnn-nnnn (Sprague River OR)

Meyers water pump, bulldozer 6x6 flat belt driven, inspected and painted, $300; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Mower conditioner: International model 990, 9’ cut needs repair lots of usable parts, $275; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Mower: Farmall Cub sickle bar mower, needs pitman arm stick, $75; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Planters: John Deere 71. Flex planters, several planting plates; John Deere 249. Planter on 3-pt tool bar, ready to use; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Plow: Dearborn Model 10-80 two bottom disk plow. One disk is missing, the other disk is broken and needs to be replaced with a new 24” disk blade. This is an unusual and hard to find Ford tractor implement, $160, can load on your truck or trailer, email for pics; John Boehm nnn-nnn-nnnn (email preferred) xxxx@xxxx.xxx (Woodland CA)

Plow: McCormick Little Genius plow, #8, great condition, $150; Al Barkl nnn-nnn-nnnn (Elko NV)

Plow: Pittsburg 3-pt tool bar, 5 spring loaded shanks, adjustable 3-pt 1-bottom 2-way plow; $300; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Post hole digger, $350; located in Silverdale WA, can email pics; Mary Porter nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)

Powermatic Houdaille 6” jointer, model 50, table size 7” x 48”, good condition, $400 obo, can send pics; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Rake: John Deere hay rake. Two small tires in the rear, two car type in front, usable, $375; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Roofing: Hi-rib, 36”, 26 gauge Galvalume roofing. Approximately 125 pieces, about 21’ long, $40 per piece; Ronn Boehlke nnn-nnn-nnnn, nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Scythe, 70 years old, excellent condition, used very little, $125; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Sewing Machine: Model 221 Singer Feather Weight sewing machine, very good condition, $500; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Shelving cross pieces for adjustable shelving, have lots, make offer; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Six integral implements for John Deere M or MT: 2 bottom plow, scraper, spike tooth harrow, toolbar with spring tooth cultivators, Killefer 4’ disk, Schmeiser 6’ ring roller, can load on your truck or trailer, email for pics; John Boehm nnn-nnn-nnnn (email preferred) xxxx@xxxx.xxx (Woodland CA)

Small plow $40; located in Silverdale WA, can email pics; Mary Porter nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)

Snow chains for big rigs: 3 sets cable chains, new in box, 10.00-20 or 11.00-22.5, $65 per set. New in bags a set of heavy duty double railers, real chain with grabber bars, 10.20-20 or 11.00-22.5, $350 set; Bob Folk nnn-nnn-nnnn or xxxx@xxxx.xxx (Eastsound WA)

Snowmobile: old Skiroule snowmobile for parts or restoration. Has been sitting for years, was running when parked, hood is cracked, do not know model, 1064 miles, you haul, can email pics, $100; Carol nnn-nnn-nnnn (Keno OR)

Subsoiler: John Deere Killefer subsoiler, sn 20A-11; John Buckley nnn-nnn-nnnn (Kansas City MO)

Tire: 750-17” Radial tube Michelin, Load Range D, 85% tread, $50; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tools: Large valve spring tool; large ring compressor sleeve puller; several different large brake spring pliers; W.S. Transue nnn-nnn-nnnn (Cromberg CA)

Trencher: ARPS Trench Devil trencher. Perfect for landscapers, has Robins engine, complete and looks good, but not currently running, can load on your truck or trailer, email for pics; John Boehm nnn-nnn-nnnn (email preferred) xxxx@xxxx.xxx (Woodland CA)

Trailer: Flatbed trailer built for 1-ton, 8x8 wood deck, metal frame, deck replaced 4 years ago, excellent condition, $300; nnn-nnn-nnnn, phone calls only (Goldendale WA)

 

Stock trailer: Circle J, 1976, 18ft (?), $900; nnn-nnn-nnnn, phone calls only (Goldendale WA)

USFS fire box; 2 axes; McClouds; 2 shovels; 5th-wheel manual slide; four 24” loader tires mounted on wheels; W.S. Transue nnn-nnn-nnnn (Cromberg CA)

Utility trailer 7’ x 16’. Wooden deck, duel axles, detachable steel ramps that store beneath the deck, G.V.W.R. 7000lbs, fits 2-5/16” ball. Built by Wilson Custom Trailer mfg of Post Falls, ID, June 1998. Original tires, deck needs replaced, $500; Richard Hanna nnn-nnn-nnnn or xxxx@xxxx.xxx (Hayden ID)

Valco boats: Have two. One 13ft, has trailer, no motor, $600; one 14ft, no trailer, no motor, $400; Ron Hunt nnn-nnn-nnnn (Woodland CA)

Vaughn drag saw, complete, not running, $400 obo; John Dornbusch nnn-nnn-nnnn (Brookings OR)

Wards LoLoad farm wagon, 17” wards tires, $300; Bill Bartlett nnn-nnn-nnnn (Cotati CA)

Welder: Miller 225G, Bobcat-CC/CV-AC/DC-Onan. 16XSL, engine stored in shed, not used for 13 years, $500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Welders:  Two Lincoln SA 200 pipeline welders, both have long leads, very good condition, one on nice trailer $1500 obo, the other one, $750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Wheel chair: Jazzy Electric wheel chair, real nice condition, good battery charger, includes a suitcase folding aluminum loading ramp, package complete $400; Tom Barrett nnn-nnn-nnnn (Atascadero CA)

Wheel weights: Set of 16” wheel weights, two halves per wheel, $200; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Wheels, have five, 31-1050x15 Wild Country tires, 75% tread to fit IH Scout, $125; John Lang nnn-nnn-nnnn (Monmouth OR)

Wood cook stove. Nice old wood cook stove, cream color laced with green, has warming shelf, would be good to use or for display, $300; Dave Itel nnn-nnn-nnnn (Aurora OR)

Yard art: City of Heppner fire hydrant, from 1968, $200; Joe Keith nnn-nnn-nnnn (Hermiston OR)