November 2016 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, 1939, excellent rubber, parade ready, wide seat, runs and drives well, $3000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

Allis Chalmers B, runs , fair rear tires, new fronts, good paint & tin, $950; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)

Allis Chalmers CA, straight metal, last ran 2yrs ago, spinout rims, $600; Fred nnn-nnn-nnnn or 253 391-9815 (South Prairie WA) 

Allis Chalmers M track chain, new, still rolled up, 3 boxes track bolts, $700. Two front track wheels, 4 rear sprockets, all excellent but used, make offer. Extra manifolds, fuel tank, later one with one compartment; Gary White nnn-nnn-nnnn (Yamhill OR)

Avery V parts: Drive line cover, $20 + shipping; Hood, $75 + shipping; Garland R. Goesch nnn-nnn-nnnn (Port Townsend WA)

Case 400D, 1954, NF RC round nose, fair tin, $1000 obo; Art Keyes nnn-nnn-nnnn (Toledo WA)

Case LA, 1941. Tires are no good. Tin is all very good, with minor surface rust. Engine complete with starter & mag. Still turns over with the crank. Head is cracked but have complete block & head goes with it. Block also has a crack but could easily be fixed. Cast grille is gone, $500 or possible trades; Ken nnn-nnn-nnnn 6-8PM (Goldendale WA)

Case VAO straight sheet metal, $500; Fred nnn-nnn-nnnn or 253 391-9815 (South Prairie WA) 

Case VAO, 1952, WF, belt, eagle hitch, good field tin; Art Keyes nnn-nnn-nnnn (Toledo WA)

Caterpillar 10, older restoration, blade, ran when parked in the shed 3 years ago. $3800; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)

Caterpillar D2 5U, canopy, direct electrical start, track in good shape, hydraulic blade with clearing rake, new batteries, strong engine, $3000; Dennie Modahl nnn-nnn-nnnn (Spanaway WA)

Caterpillar parts: Ensign carbs for Cat 20, 30 all rebuilt, $450; D2 track adjuster covers, new, $450 pair; D4 engine side panels, $100; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Cletrac 35, 1933, sn 1416, older restoration, was running when stored 20 years ago; Mike Tyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Moore MT)

Cletrac 40-30, 1930, very rare, only 306 made, older restoration, was running 20 years ago; Mike Tyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Moore MT)

Cletrac 55, 1936 with Garwood dozer. Has been outside for several years, engine stuck. Was told it has special snow tracks. Older restoration, was running when stored 20 years ago; Mike Tyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Moore MT)

Cletrac ADH, 1946, sn 3Z14, original battery box; Mike Tyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Moore MT)

Cletrac BD, 1935, sn 2D18, has original hood side panels, battery boxes, older restoration, was running 20 years ago when stored; Mike Tyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Moore MT)

Cletrac BGS, sn 8C 728, with Heil dozer; Mike Tyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Moore MT)

Cletrac DGH, sn 2E772, has original lights and battery box, has been outside for several years; Mike Tyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Moore MT)

Cletrac gas tank, $25 + shipping; Garland R. Goesch nnn-nnn-nnnn (Port Townsend WA)

Cleveland H, 1919; Mike Tyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Moore MT)

Farmall 450 diesel, starts and runs, needs work, fast hitch, IPTO, TA good, $1600; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Farmall A , does not run. Includes a plow if needed, or plow can be sold separately. Best estimate of year is early 40s. U haul. All offers accepted; Robert Moore nnn-nnn-nnnn (Sedro Woolley WA)

Farmall A, 1939, very early serial number FAA795, original tractor, newer rubber, unrestored, one of first to west coast, consider trade for unstyled John Deere B; Todd nnn-nnn-nnnn (Placerville CA)

Farmall A, have two, 1941 and 1944 for parts, $750 both; Art Keyes nnn-nnn-nnnn (Toledo WA)

Farmall Cub and Farmall A cranks. Farmall Cub front wheel; Gary White nnn-nnn-nnnn (Yamhill OR)

Farmall Cub with hydraulics, decent tires, good rims and sheet metal, needs new grill screen. Needs tune-up, $2250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall Cub: lots of good parts, $1200 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall F-14, sn FS 45424. Single front wheel. Tires are shot. Tractor is complete except for hood, $200. Also the mowing machine for Farmall F14, 7 foot bar. Complete except for wood arm, $100. This is a PTO unit that bolts to the back of tractor. Take both for $250; Wilbur Reil 530 756 1018 (Davis CA)

Farmall F-30, narrow tread, 1936, sn FB15428N on round spokes front & rear, rebuilt head, no cracks, runs good, $2150; Bob Jaqueth nnn-nnn-nnnn (Careywood ID)

Farmall Super AV, 1948, excellent condition, parade ready $5,000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

Ferguson TO-20 1951 tractor with Edwards rear hydraulic forklift. Runs excellent, good tires. Forklift lifts over 5', has tilt and side shift, $1650 obo; Larry Schwarz nnn-nnn-nnnn (Centralia WA)

Ferguson TO-20, nice and straight, $2250; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 2N (early) has a lot of early aluminum castings on this tractor, dash, side covers etc. Rear tires are good; Fred nnn-nnn-nnnn or 253 391-9815 (South Prairie WA) 

Ford 2N, older restoration with new rear tires, lots of extras: 2 plows, buck saw, rear blade, umbrella, grill guard, $2800; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Ford 601 with 134 engine parting out, tires, wheels and fenders are gone; Fred nnn-nnn-nnnn or 253 391-9815 (South Prairie WA) 

Ford 860, runs good, $3000; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, 1950, with combination high-low Sherman auxiliary transmission, $2500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, restored. Original rubber, newer paint, lights, front bumper, sn 177. Very, very nice, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N. Complete rebuild, front distributor, 4 ring high-dome power pistons, front has 2N wheels 4x19, new 10” tires on rear, swinging drawbar, new fender & hood, metal overhaul, $5000; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 9N, possibly built first day of production ser # 168 recent WA State barn find, aluminum hood, 32" rear tires, small gen. All there, should run. $ offer; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)

Ford 9N/8N tractors, parts, 10 to choose from; Dale Fye nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)

Ford Model T tractor conversion, 1924, comes with another complete drivetrain, plus extra starters, water pumps and more. Need to sell for health reasons. Featured in Antique Power magazine Nov-Dec issue of 1998, best offer; Thomas Bastian nnn-nnn-nnnn (Cave Junction OR)

Ford NAA, 1954, strong engine, rebuilt hydraulics, very good rubber and tin, Sherman Step Up ready for work, $3000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

Ford tractor parts: 9N/2N hood, gas tank, sides, and grille w/ horizontal openings, $200. Rear fenders, one old and one aftermarket, $65 ea. 8N steering gear with dash and steering wheel, $125. 9N/2N radiator, untested, $45. 8N rear wheel weights, $200; Todd nnn-nnn-nnnn (Placerville CA)

John Deere 420 short blocks, rebuildable; Ralph nnn-nnn-nnnn (Wolf Creek OR)

John Deere 420C 5-roller parts, Holt tilt blade, call for needs; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere AO, unstyled. Engine stuck, on rubber for restoration, $1250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere AR, 1937. Nice running older restoration tractor. New rear tires. Decent sheet and nice paint, $4500 obo; Tim Morris nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)

John Deere B, 1938. Long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1939 parts: head, block, pistons, complete assembly, $500. Complete radiator, $300; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1935. Complete, not stuck. Comes with brand new fenders & hood, very nice old '35 D, $2500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1941 hood, no dents, $125; Hubert Bierly nnn-nnn-nnnn (Bend OR)

John Deere D, 1946, styled. Complete but engine stuck, $2500 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere fender, left rear for 7420 or 7520, may fit others, in very good shape, $225; Carol Gay nnn-nnn-nnnn (Keno OR)

John Deere LA, 1941 (?), good shape, $2100 obo; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere loaders parting out: 71, 90, 91, 831, Ateco; Ralph nnn-nnn-nnnn (Wolf Creek OR)

John Deere MC tracks, 12" pads; Ralph nnn-nnn-nnnn (Wolf Creek OR)

John Deere MI, 1951. Very good running tractor with brand new tires. Mostly complete minus factory draw bar. Runs and drive great, $3200; Tim Morris nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)

John Deere steel extension rims, 6" wide , with lugs, 45" dia, great condition, lightly rusted, stored inside until recently, $350; Fred nnn-nnn-nnnn or 253 391-9815 (South Prairie WA)     

Kubota hood: Near new hood for Kubota B2350 and BX1860, $100 each; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Kubota L245, L295, L2800 and B7100 parts; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)

Massey Harris 44, rear tires are 95%, one new front tire, 3 pt and remote, $1575; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Massey Harris Pony parts. No motor, sheet metal or wheels, $100 for all; John Lang nnn-nnn-nnnn (Monmouth OR)

Massey Harris wheels, two 10x38, one 12x38, $40 each; Hubert Bierly nnn-nnn-nnnn (Bend OR)

McCormick Deering OS4, 1948, good tires, parade ready, $3000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)

Oliver Cletrac HG, 1948, with 6’ dozer; Mike Tyler nnn-nnn-nnnn or xxxx@xxxx.xxx (Moore MT)

Oliver/Fiat 1465 sliding armature starter; Gary White nnn-nnn-nnnn (Yamhill OR)

---------------------------------