Aermotor 2-1/2 hp fluted hopper engine, very original condition, very nice patina with the original lettering still very visible, ignitor, original mixer, etc. Very nice gears, no cracks, breaks or welds. Engine has compression but hasn't ran in a long time, $4150; Larry nnn-nnn-nnnn (Phelan CA)
American Gasoline Engines Since 1872 book. Yellow cover, by C.H. Wendel. Good condition. Have 2 copies, $75 each plus shipping; Bob Johnson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cedarville CA)
Drag saw engines, 3 old drag saw engines for parts only, no carbs, free to good home; Dave nnn-nnn-nnnn (Aurora OR)
Due to health issues, I'm forced to sell my hit & miss engines. My collection includes Maytags, uprights, 82's, 92's, 72's, New Way, International, Associated Hired Hand & 3 Mule Team. Pictures available upon request; Jesse nnn-nnn-nnnn (Beaver UT)
Engines: Sun Power 1-3/4 hp, complete, stuck. Waterloo 1-1/2 hp, missing muffler & mixer. Galloway 2-1/4 hp, missing mag. Famous 3 hp, vertical, no cooling tank. John Smyth 8 hp. Also some parts; Jim Harrison nnn-nnn-nnnn (Mountain Time Zone) (Missoula MT)
Fairbanks 3 hp Z, turns free, with mag, $275; Dave nnn-nnn-nnnn (Aurora OR)
Fairbanks 6 hp Z, mostly complete with mag. Engine is stuck, shouldn't take much to free it up, $275; Dave nnn-nnn-nnnn (Aurora OR)
Good 4 cylinder Murphy diesel engine, complete fan to clutch, make offer; Pat Ridders nnn-nnn-nnnn (Albany OR)
Gorham gas engine, rare and unusual California built engine. Single cylinder, 5 hp, open crank and open cam. Lots of brass. There is a repair to the water jacket and a weld on the top by one of the big bolts. The Gorham has not run for the last 6-8 years. When I tried to start the engine it turned over right away and runs very good. Battery and cart are not included. I have not seen or heard of another one like this style engine. Please check out the YouTube video of this engine running and more information about the builder, https://www.youtube.com/watch?v=VDtJQPhcZ3w or just put in GORHAM Marine Gas Engine in youtube.com, $3500.; Jim Beeler 253 531-5106 or xxxx@xxxx.xxx (Tacoma WA)
Hercules IxB5 engine with clutch and starter, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
International Harvester engine 135. Has clutch, $500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
John Deere 1-1/2 hp, rare brass tag spark plug engine, $1800; Dave nnn-nnn-nnnn (Aurora OR)
John Deere LUC power unit. I was told it is off a combine. Power unit on a frame with tin and radiator. No drive unit. $200 obo; Chris Anderson nnn-nnn-nnnn or xxxx@xxxx.xxx (Renton WA)
McCormick Deering 1-1/2 hp hit and miss engine. Turns over. Converted to points and coil ignition. I can get it to pop but have not had it running. On wooded skid, $250; Chris nnn-nnn-nnnn (Camano Island WA)
Missouri 1-cylinder marine engine made in Kansas City, disassembled, $300; Buck Evans nnn-nnn-nnnn (Greenville IL)
Model A Ford engine on skids. Power unit with transmission and flat belt pulley. I was told it had been used to power a saw rig. I have never seen it run. Engine is stuck. All here except distributor cap and wires. $250 obo; Chris Anderson nnn-nnn-nnnn (Renton WA)
Model engine: All new 1/3 scale model hit miss engine, "The Flea". 6-5/8" diameter flywheels, 1-1/2" bore, 1-1/2" stroke, cast iron construction. Fully self-contained, finished and ready to run, $1500; Mark Bruto nnn-nnn-nnnn (Placerville CA)
Multiple engines: Fairbanks Morse 6 hp Z on skid. Throttle governed. Good runner and easy starter. Mag, oiler and hand crank are all included. Just remember, crank kills. $950; Monitor 1-1/4 hp pumping engine. Hit and miss. Complete included pump jack with pump clamping bracket and in/out gear to shift into neutral. Also has accessory flat belt drive pulley, and heavy cast pump disconnect bracket. With oiler & ignition box, mounted on nice homemade 4 wheel cart. Restored, clean, and good runner. $975; Witte 2 hp Hit and miss. Real nice clean little engine on a skid. Excellent runner. Hot Wico mag and oiler included. $675; Gray Marine 2 hp. Nice little upright 2 stroke engine with piston type cooling pump and steel cooling tank. Also has a copper fuel tank. Battery ignition. Engine will run in either direction. Skid mounted, weighs only about 100 lbs. $375; Stover CT-2 Needs a rod bearing, crank is in good condition, but bearing is missing. On a skid. Not stuck. $300; 12” original pulley for John Deere 3 hp E . 3 bolt mounting. $100; All engines except the Stover are runners and I am happy to text or email photos on request. Located in Reno NV. Also, I will be travelling to northern Washington in mid May and Idaho mid June. I can meet you for delivery; Ed nnn-nnn-nnnn call or text (Reno NV)
Novo 1-1/2 hp, has Wico EK mag, nice little engine, $750; Dave nnn-nnn-nnnn (Aurora OR)
Ohio 6 hp, 1904 engine, made in Sandusky Ohio, fully restored. Antique farm equipment and vehicles. Absolute auction May 5th. Visit our website at Downsauction.com for more details; Whitney Lee nnn-nnn-nnnn (Middleton ID)
Reid 25 hp restored super charged oil field engine, mounted on a 4-wheel cart with draw bar for towing. It has a lawn mower engine to safely start it without having to climb the fly wheels. There is also a small air compressor installed to blow whistles etc. The engine has been stored indoors since restoration. It has not been shown publicly for many years. $10000 obo. In the next few months we will be offering 20 or so rare engines including side-shafts and European engines along with US engines. More pictures available by email. Gary nnn-nnn-nnnn cell or nnn-nnn-nnnn or xxxx@xxxx.xxx (Malibu CA)
Schmidt’s Chilled Cylinder 3 hp, 1907 pat. date on name plate, has cooling fan and screen, running condition on cart with battery, can send more pictures; Bill Majors nnn-nnn-nnnn or xxxx@xxxx.xxx (Walnut Creek CA)
Stover 1-1/2 hp K, 1921, sn K141403. Runs very slow, spoked flywheels, open crankcase, grease cup, rod bearing, oil hole main bearings, new gas tank, rebuilt Webster Tri-polar magneto, on 4 wheel cart. Runs good, $900; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Titan Jr, 1 hp, older restoration, battery ignition, on trucks, $1800; Buck Evans nnn-nnn-nnnn (Greenville IL)
Wisconsin V-4 engine off of hay bailer with clutch and starter, $500 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Witte 2 hp Type B, 1924 throttle governed engine. The engine runs well on the starting gas tank, but it is missing the original gas tank, though it does have the mounting tabs for the tank. The crank guard is also missing. Has a Wico EK magneto. Here's a video: https://youtu.be/3a_DdWZoZ9U?t=26; Kip Keeney nnn-nnn-nnnn or xxxx@xxxx.xxx (Seattle WA)
Witte 2 hp type B. Serial number makes it a 1924. Missing main gas tank and splash guard. Has sprocket instead of pulley. Email or call and I can send you photos/video; Kip Keeney nnn-nnn-nnnn or xxxx@xxxx.xxx (Seattle WA)
Witte 3 hp on nice cart ,Wico mag, good condition $475; Larry nnn-nnn-nnnn (Phelan CA)