Allis Chalmers 20-35, 1926, restored, runs, on steel. Very good condition, $6000 obo; Tom Treadaway nnn-nnn-nnnn or xxxx@xxxx.xxx (Pleasant Hill OR)
Allis Chalmers B, good condition, $1500; Ed Bring nnn-nnn-nnnn (Molalla OR)
Allis Chalmers C, narrow front, with Allis Chalmers belly mount sickle mower. I bought it, got it running good and used/showed it a for a number of years then it has sat since. New Firestone rear tires about 10 years ago when I got it. Front tires are in good condition (Tri-rib ag tires.) Fuel tank was anti-rust coated. Not running at this time but engine is free. Nice little Allis for someone to restore. Just needs a new home and some TLC, $1000 obo; Chris Anderson nnn-nnn-nnnn or xxxx@xxxx.xxx (Renton WA)
Allis Chalmers D-14, 1960, parts for sale, starter (also fits D-15 gas), now $125; gas tank, cap, gauge, sediment bowl and shutoff, very good, reduced to $150; radiator, good, now $150; radiator shroud, reduced to $100; half hood, exhaust side, now $75; Iver nnn-nnn-nnnn (Vancouver WA)
Allis Chalmers G with hydraulics, new tires, runs good, call for price; Jerry Fischer nnn-nnn-nnnn (Gaston OR)
Allis Chalmers, 1950, WD45 engine, AC front loader, extra-large bucket, hydraulics work, very good tires, wide front end, extra hood, new battery; Duane Nelson nnn-nnn-nnnn (Carson City NV)
Antique tractor repair and overhaul work. Do you have some machines that need overhaul or other repairs? Over 20 years’ experience in farm equipment repairs and overhaul. John Deere is my specialty but have experience with other brands as well. Call or text for more information and questions; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
Buda engine: 6BD230 diesel, for Cockshutt 40 or Allis Chalmers WD45 diesel. Has cracked cyl. [wet] sleeve and stuck. Cyls. sleeves show very little wear. I would provide a replacement sleeve from gas engine, should be the same. Good head, $400; Francis Garceau nnn-nnn-nnnn (Jefferson OR)
Case 480B diesel, 1970s, with 3 point hitch and loader, loader in good shape, 3 point has extra cylinder to have capabilities of tilting a blade, has very good tires all around, tractor does not run, been sitting for 5 years, previous owner said it developed a knock, he shut it down and sitting ever since, oil looks good, block looks good, tractor overall looks very good, I can load. $2700 as is; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Case CC, 1938, hand start, good runner, easy to start, fair rubber, good metal, all orig., a hard to find model, quick sale at $1000; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)
Case DC transmission housing with heavy duty extended axles; David or Erlin Santoro nnn-nnn-nnnn (Hillsboro OR)
Case S, 1943, very nice restorable tractor, this is a war time tractor on rear cut offs. Rear tires no good, fronts ok. Engine turns over. Good sheet metal. Call for more information and pictures, $600 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case SC tractor rims, have two, size 11-12x38, $100 for both; Ed Bring nnn-nnn-nnnn (Molalla OR)
Case SC, needs tune up, ran last fall, $750; Ed Bring nnn-nnn-nnnn (Molalla OR)
Case VA parts: I have several parts tractors, call with needs; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case VAC tricycle, all new tires, rebuilt carb & fuel system. New battery & 12 volt system. 3pt, with blade, $1550, trade obo; Delmer nnn-nnn-nnnn (Yakima WA)
Case VAH, 1948. This is a good restorable high crop, very nice sheet metal, engine turns over. Call for more information and pictures, $2200 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case VAI, bad engine, lots of good parts or restore. Call for more information and pictures, $300; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case VAO, 1947, with full orchard shielding. Fully restored in 2010 and was the featured tractor in the January/February 2012 Antique Power Magazine. Good runner, good rubber. I've never seen a prettier one, price reduced to $6000; Maloy Murdock nnn-nnn-nnnn or xxxx@xxxx.xxx (Merlin OR)
Case VAO, 1951, runs, good tin and rear tires, restore or use as parts tractor, $500; Ray Gossett nnn-nnn-nnnn (Hermiston OR)
Case wide tread tractor, 1936, has two set of wheels. One set on rubber and one on steel, $5100 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)
Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar 10, 1929, restored, sharp, $4995; Bob nnn-nnn-nnnn (Rhododendron OR)
Caterpillar 10, 1930, driver, $2750; Bob nnn-nnn-nnnn (Rhododendron OR)
Caterpillar 10, 1930, missing parts, not stuck, $1250; Bob nnn-nnn-nnnn (Rhododendron OR)
Caterpillar 22 parts tractor, tractor #2f2126, $500; Jose nnn-nnn-nnnn (Rosemead CA)
Caterpillar 22, early, orchard style, tractor #2f8296sp, $1500; Jose nnn-nnn-nnnn (Rosemead CA)
Caterpillar 30, 1926, for sale or trade by second owner. Unrestored with original canopy and bill of sale from first owner. Runs on propane, price reduced to $3500; Richard Watson nnn-nnn-nnnn or xxxx@xxxx.xxx (Gridley CA)
Caterpillar 30,1928, PS2811 top mount seat, stamp pads, $3500; Jose nnn-nnn-nnnn (Rosemead CA)
Caterpillar parts: Ensign carbs for Cat 20, 30 AEL and 60 AAE all rebuilt, $300 each. D2 track adjuster covers, new, $450 pair; D4 engine side panels, $100; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Caterpillar parts: track rails with sprockets for Caterpillar 22 or will fit D2, $300. Starter for 92 series Detroit, $50 or trade. Power take-off for a Cat D2, $400; Jim Ronsse nnn-nnn-nnnn (Chicago Park CA)
Caterpillar small 15, 7-C, 1932. Barn fresh, driver, $7995; Bob nnn-nnn-nnnn (Rhododendron OR)
Cletrac HG-42, circa 1948. Runs, with hydraulic blade made by Anderson, undercarriage a little tired, tracks in good condition, $2200, will consider offers; Richard Olson nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Cletrac MG1 US Army Bomber Nurse, 1942, 13500 lbs, maximum speed 22 mph, max drawbar pull 7000. Has 6 cylinder Hercules gas. Restorable, great project, needs gas tank, does not run. Buy a piece of WWII history, $1800 or offer; Paul Valentine nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)
Cockshutt 40, 1951, originally sold as a CO-OP E4. This tractor has the seldom seen [rare] single front wheel option for a Cockshutt tractor. Also has early style hyd. system, and rock shaft, another rare option. Good running Buda 6B230 gas engine, good compression and oil pressure. No engine oil leaks. Good clutch, good gears. Clean rear rims, w/ 13.6 x 38 agri power rears, fair cond. Brakes work, ready to restore or use as is, price reduced to $2400 obo. Also have WAFE 40 for sale; Francis Garceau nnn-nnn-nnnn (Jefferson OR)
Farmall 460 cylinder head, for International 6 cylinder 236 cubic inch diesel engine; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Farmall 460, runs good, has hydraulic loader and 3 point hitch, $1750; Ed Bring nnn-nnn-nnnn (Molalla OR)
Farmall A, don't know the year, is owned by a friend. Call me for her number. It has a full hydraulics system and front loader; Ken nnn-nnn-nnnn (Goldendale WA)
Farmall A, restore or parts, good FFA project, $500 obo; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall AV, barn fresh high crop, good sheet metal and 36 inch tires, engine loose, $995, ready for restoration. Email for photos or see at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)
Farmall B, 1944, tricycle, new rubber on rear, runs very good, steers, stops good, clutch good, some noise in gear box, all gears work okay, probably worn gears or bearings. Excellent tin, $700 or trade for flatbed trailer or motorcycle; Ken Pearson nnn-nnn-nnnn (Goldendale WA)
Farmall C, barn fresh, very complete with good sheet metal and 36 inch rear tires, ready for restoration, $950. Email for photos or see at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)
Farmall Cub Lowboy (white & yellow) with 3 pt hydraulics, new rubber, call for price; Jerry Fischer nnn-nnn-nnnn (Gaston OR)
Farmall Cub with blade, plow, mower, cultivator, and disc, new rubber, runs good, late model (3 bar grill), call for price; Jerry Fischer nnn-nnn-nnnn (Gaston OR)
Farmall Cub, 1949. New rings and valve job done, plus it has a lot of cultivating tools. Tractor has been kept inside for the last 40 years. Photos are available, $2200; Jim Ronsse nnn-nnn-nnnn or
xxxx@xxxx.xxx; Jim Ronsse nnn-nnn-nnnn (Chicago park CA)
Farmall H and M parts as well parts tractors (engines stuck) for sale, come take a look or call. One International Super H parts tractor (stuck engine) with straight tin and grill. One 1953 Cub, not stuck, needs TLC, has seat and hood off, hood is very straight & primed. Will not part out, sold complete, $800 firm. One "A" bolster very clean, painted IH with 2150 ready to go, $275 obo. A few Paper and Steel belt pulleys for H's and M's, Cubs, $90 obo. One Cub belt pulley assembly, $100 obo. Cub Cadet parts, rear end (needs 2nd gear) frame, new front axle & misc parts. One Cub original 7hp engine in good shape with dip stick. Cleaning out my tractor shop, open to any fair offer; Chuck Verdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)
Farmall H belt pulley gear box, excellent condition, $65. Front radiator shutters and controls for Farmall H, repainted, excellent condition, $80; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall H Donaldson air cleaner assembly with jar, $20; Al nnn-nnn-nnnn eves (Elko NV)
Farmall parts for Farmall Cub, A, B, C, H and M; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall Regular, 1927, with unrestored cultivator and Kay Brunner wheels. Antique farm equipment and vehicles. Absolute auction May 5th. Visit our website at Downsauction.com for more details; Whitney Lee nnn-nnn-nnnn (Middleton ID)
Farmall Super A, new tires, new battery, belly mount grader blade, 3 pt. $2500. Farmall Cub w/front end Henderson loader, new tires, new battery. $2750; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall Super C drawbar, mounting frame & swinging bar, $25; Al nnn-nnn-nnnn eves (Elko NV)
Farmall Super C, 1951-1954, tricycle, fresh paint, runs strong, good rubber all around, $2750; Stuart Wade nnn-nnn-nnnn (Chico CA)
Ferguson TO-20, straight sheet metal, good paint, good rear tires, $2500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 4000 HD Industrial, 1964, 4 cyl diesel, runs good, sheet metal good, select-o-speed transmission, power steering, dual loader, $4500; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (Tekoa WA)
Ford 800 tractor, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 800, engine runs very good, noise in clutch area like a dry throw-out bearing, $3000; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 8N, restored, original rubber, newer paint, lights, front bumper, sn 177. Very, very nice, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford 8N, running, with Sherman combo trans, $2750; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 8N,1950 and 2N, 1943, both in good condition with some restoration. Also, to be sold with or separately: Wagner loader, Dearborn cultivator, back blade and rock rake. Pictures upon request, $6000 for all or can separate and deal; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
Ford 9N & 8N, parting out two tractors with very good sheet metal, engines no good. Call with needs; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Ford NAA, 1953, good, $3250; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Fordson gear driven bracket for high-tension magneto with built-in governor. Type MG24,.$200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Fordson magneto cross drive complete unit except mag decent shape, $375; Robert Middleton
nnn-nnn-nnnn or xxxx@xxxx.xxx (Sparks NV)
Fordson PTO "Plymouth gear shift pulley" #B6712, $1000 obo; Jose nnn-nnn-nnnn (Rosemead CA)
Fordson, 1925, #505411, $2500; Jose nnn-nnn-nnnn (Rosemead CA)
Frick 12-24, 1918, beautiful, only 4 in existence; Waynesboro, Pennsylvania, 4 owners. Antique equipment and vehicles. Selling in absolute auction May 5th. Visit Downsauction.com for more details; Whitney Lee nnn-nnn-nnnn (Middleton ID)
Harris Power Horse with 4 wheel drive and Chrysler industrial engine, $4500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International 1066 Hydro. Runs good. Have 3-point arms and rims for duals. All new batteries, filters, and oil, $5000 FIRM, cash only. Please call and leave a message, I will return your call. I don't text; Aaron nnn-nnn-nnnn (Walnut Grove CA)
International 3414 tractor chassis, no motor, otherwise complete. Usable rubber. Would be cool with V8 adapted, $500 or trade for scooter or motorcycle; Ken Pearson nnn-nnn-nnnn (Goldendale WA)
International 460, utility tractor, with 282 cid diesel engine, $1800 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International C, 1950, runs like a top, front blade, good tires, new battery, ready for paint; Rolly nnn-nnn-nnnn or Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (St. Maries ID)
International Harvester 10-20 Mogul, 1917, restored. Antique farm equipment, and vehicles. Live and online absolute auction. May 5th. Visit Downsauction.com for complete details; Whitney Lee nnn-nnn-nnnn (Middleton ID)
International T-6, wide gauge, good undercarriage, good sheet metal and a BE-GE hydro pump. Just a good old tractor with a small problem: it needs to have the head gasket replaced. I have the new gasket set but I'm just too old to do it. Several items related to the tractor are included in the selling price of $1850. Please call and leave a message and I'll return your call (I do not text); Hank Roberts nnn-nnn-nnnn (Sacramento CA)
John Deere 1010, 1962, gas, runs good, sheet metal ok, dash shifter, power steering, dual loader, $3800; Greg nnn-nnn-nnnn or xxxx@xxxx.xxx (Tekoa WA)
John Deere 40 waffle rims: 24 inch with usable tires one mounted and aired up. One tire and tube with waffle rim unmounted. Tire size 11/2 X 24 inch. Selling in pair only, $975; Dave Pearsall nnn-nnn-nnnn. Email for photos xxxx@xxxx.xxx (Olympia WA)
John Deere 420, 1958, gas, excellent, complete machine shop motor overhaul. New clutch to throw-out bearings. New rear tires, power steering rebuilt, new tach cable, new fan belts & generator. Rebuilt 3pt and PTO. Premium paint job to new decals. I have $6750 in it, will sell for $5500; Bud Combe nnn-nnn-nnnn (Grants Pass OR)
John Deere 430 T restored, new tires and runs excellent, call for price; Jerry Fischer nnn-nnn-nnnn (Gaston OR)
John Deere 50 parts or buy completely disassembled: square wide front, power steering, fair sheet metal, 12.4-38s 80% L/S bar, with a few new and rebuilt parts. $1600. Will not sell parts until the 12th of May. Call early to get on parts list; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 50 tricycle, Yakima hitch, power steering, $1500, trade obo; Delmer nnn-nnn-nnnn (Yakima WA)
John Deere 50, 1955. New tires, wide front, runs, $5000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere 50, Roll-o-matic front end, average tires, sheet metal pretty good, has not been started for a couple years, $1000; David nnn-nnn-nnnn (Spokane WA)
John Deere 530, wide front end, runs and looks good, $3200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 60, 1953. New tires, paint, standard, low seat, runs, $7000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere 60, narrow front tires with Roll-o-matic. Also has 42" rear tires, $1925 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 70, 1955. Standard, gas, new tires & paint, runs, $7000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere 80, 1956. Dual remotes, both motors running good, $10000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere A, 1937. New tires, fenders, hood, and shutters. Runs good, $4500; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere A, 1945. Tractor ran last year. Will need carburetor and magneto work now. Hood is there, but rough. New exhaust pipe and stack. Tires are shot; $500; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere AR, $2500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere AR, 1941. New tires, steering wheel, lights, electric start, runs, $4500; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere B 1939 parts tractor. Factory spoke rear wheels. Engine turns over. No sheet metal at radiator. Tires are bad, $550; Kurt Spegel nnn-nnn-nnnn (Cornelius OR)
John Deere B, 1938. Long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939. Engine stuck. Nice original rear tires in decent shape. Hood and grills are decent. New front tires. Make offer or trade for something I might need?; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere B, 1940, rebuilt engine, good tires, $2500 cash. Picture available on Craig's list/Colorado Western Slope; Keith Kinnett nnn-nnn-nnnn or xxxx@xxxx.xxx (Delta CO)
John Deere B, 1943. Tractor runs and has nice original rear tires. Fronts tires are new with newly painted rims. Needs lots of TLC. Make offer or trade for something I might need; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere belt pulley for 40-420-430, $350; Dave nnn-nnn-nnnn (Aurora OR)
John Deere BR, 1936, on steel. Brass tag, runs good, $5995; Bob nnn-nnn-nnnn (Rhododendron OR)
John Deere BR, 1944. Hand start, good tires, new fenders, runs good, $2700; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere crawler: selling all crawler parts, books, John Deere tools. Call for needs, first come gets the better parts; Ralph Newman nnn-nnn-nnnn or nnn-nnn-nnnn (Wolf Creek OR)
John Deere D, 1928. Tractor is mostly there, has the carb, a magneto etc, fenders are rough. I bought it in pieces and started putting it back together. Radiator, fuel tank, hood and fenders and some other parts are still off the tractor. Has cut down rubber front tires and steel rear. Also have a set of 28" rear wheels for rubber that can go with it. Located in Stanwood, WA. $2500 obo; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere D, 1941, styled, sheet metal very straight, paint is good except oxidized, $3500; Warren Harger nnn-nnn-nnnn (Central Point OR)
John Deere D, 1946, styled. Complete but engine stuck, $1675; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere fender, left rear for 7420 or 7520, may fit others, in very good shape. Newer series fender fits 6615-6130, 6125-6330, 7430-7530, 7130-7230, $220; Carol Gay nnn-nnn-nnnn (Keno OR)
John Deere G, 1937, serial number 1528. Older restoration. Cylinder head recently rebuilt. New front tires. Rears are decent. Has replacement radiator and components, $6000 obo. Email or text for pix and more info; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere G, 1947, pan seat. Older tires in good shape. Starts and runs good. Decent tin. Tractor is located in Lanesville Indiana currently, $4000 obo. Email or text for more info and pix; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere G, 1952, Roll-o-matic, very nice, new clutch, brakes, chrome. Stock paint, tires. Fluids, tune-up, seat, rare Yakima rear wheel weights, weight 6600 lbs. $5000 firm; Mike nnn-nnn-nnnn (Kelso WA)
John Deere G, 1953. 3.3 bottom plow, new tires, wide front, $5500; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere GW, 1948. New tires front and rear. Nice tin. Starts and runs nice. Full 801 3pt hitch and Baker aux hydraulic valve, $5250 obo. Email or text for info and pix; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere H with cultivators, runs real well, for sale or trade; JH Keith nnn-nnn-nnnn (Hermiston OR)
John Deere H, 1940. Restored, new tires, engine rebuilt, runs, $5000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere L, hand start, older restoration, bottom sickle bar, good tires, $1500, trade obo; Delmer nnn-nnn-nnnn (Yakima WA)
John Deere L, runs great, good sheet metal, 22 inch wheels and tires, has added live hydraulics and three point hitch, wheel weights, and other unique features, $3495. Email for photos or see atwww.vintagetractors.com; John Boehm nnn-nnn-nnnn or (email preferred) xxxx@xxxx.xxx (Woodland CA)
John Deere Lindeman crawler, 1947, wide pads, $5995; Bob nnn-nnn-nnnn (Rhododendron OR)
John Deere Lindeman crawler, nice condition, $6750; Dave nnn-nnn-nnnn (Aurora OR)
John Deere Lindeman parts. Complete blade with factory pump, $750. Hundreds of miscellaneous parts, some new old stock; Bob nnn-nnn-nnnn (Rhododendron OR)
John Deere M /40 parts: Front cast iron rims, 15 inch, $45 each some with usable tires. Cast iron Moon hub caps or wheel covers, $225 for pair. Torque tube, $75. Console with good tag, $125. Powertrol complete hydraulic control, $225. Final drives complete, left and right side, $275 each. Steering shaft, $75. Throttle to governor linkage and mounting bracket, $75. Air cleaner complete, $60, fan assembly and mounting bracket, $75; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
John Deere M, 1948, runs good with good sheet metal and tires, older restoration, $2600. Email for photos or see at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)
John Deere M, 1948, runs good with good sheet metal and tires, older restoration, $2600. Email for photos or see at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or (email preferred) xxxx@xxxx.xxx (Woodland CA)
John Deere MC crawler, low hour, one owner tractor, $3000; Dave nnn-nnn-nnnn (Aurora OR)
John Deere miscellaneous parts, call your needs; Dave nnn-nnn-nnnn (Boring OR)
John Deere MT, 1950. New tires, powder coated wheels, runs good, $4500; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere parts for 20, 30 and 40 series; Carol Gay nnn-nnn-nnnn (Keno OR)
John Deere R, 1953, completely restored, always garaged, nice paint job, straight, both motors run great, new tires, $6500. Can deliver for an agreed price; Dan nnn-nnn-nnnn or nnn-nnn-nnnn (Lander WY)