Allis Chalmers 20-35, 1926, restored, runs, on steel. Very good condition, $6000 obo; Tom Treadaway nnn-nnn-nnnn or xxxx@xxxx.xxx (Pleasant Hill OR)
Allis Chalmers B, 1940. Refurbished, repainted, new tires, new seat, new steering wheel, new brake bands, runs like a top. 17th tractor to come off the line with HARDY radiator shutters that work! Has a couple of SMALL issues that a new owner may or may not decide to deal with. This tractor is NICE, and I want it to go to a collector home if possible. No PTO wheel or shaft installed, Drag Machine, $3000; Lance Brazell nnn-nnn-nnnn (Sebastopol CA)
Allis Chalmers D-14, 1960, parts for sale, starter (also fits D-15 gas), now $125; gas tank, cap, gauge, sediment bowl and shutoff, very good, reduced to $150; radiator, good, now $150; radiator shroud, reduced to $100; half hood, exhaust side, now $75; Iver nnn-nnn-nnnn (Vancouver WA)
Antique tractor repair and overhaul work. Do you have some machines that need overhaul or other repairs? Over 20 years’ experience in farm equipment repairs and overhaul. John Deere is my specialty but have experience with other brands as well. Call or text for more information and questions; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
Case 25-45 model T cross motor, 1929. These are beautiful old work horses with lots of grunt. This tractor came from the factory with the internal oiling system upgrade with no external lubricator. It is an older restoration that runs and drives well. Ready to show as is or tidy it up with a cosmetic restoration. Currently on rubber bolted to the steel, but I have the original bands and grousers. Don't miss your chance to get into one of these big cross motors as they don't come up for sale all that often, $25000 obo CAD or possible trade; Jon Nessel nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
Case 480B Diesel Industrial tractor with full hydraulic loader, bucket and loader in very good shape. Has 3 point hitch with auxiliary hydraulics to tilt a blade if desired. Tractor has very good tires. Previous owner said the engine had a rod knocking he believed and he shut it down. It sat for 5 years since. Oil looks good, block looks good, overall tractor looks very good for its age, $2600; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Case C parting out; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S or R F&H hc245 rear round spoke wheels, 9x24, very nice and rare, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CC, 1938, hand start, good runner, easy to start, fair rubber, good metal, all orig., a hard to find model, quick sale at $1000; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)
Case DC, all metal in good shape, $800; Warren Harger nnn-nnn-nnnn (Central Point OR)
Case DC-4 with heart shaped front end. Hand clutch live pto, hyd and eagle hitch. Runs, need some tinkering, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DO, motor was running when parked, good parts or restore, $450; Warren Harger nnn-nnn-nnnn (Central Point OR)
Case S complete front axle assembly, wheels, drag line, wish bone, tie rod, $200; Buck nnn-nnn-nnnn (Greenville IL)
Case VAC tricycle, all new tires, rebuilt carb & fuel system. New battery & 12 volt system. 3pt, with blade, $1550, trade obo; Delmer nnn-nnn-nnnn (Yakima WA)
Case VAO, 1949, restored, runs well, exc tires,12 v, new bat, Stockton 3 point, $975; Frank nnn-nnn-nnnn (Manning OR)
Case wide tread tractor, 1936, has two set of wheels. One set on rubber and one on steel, $5100 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)
Caterpillar 10 & 15 gas tanks; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar 10, 1929, restored, sharp, $4995; Bob nnn-nnn-nnnn (Rhododendron OR)
Caterpillar 10, 1930, driver, $2750; Bob nnn-nnn-nnnn (Rhododendron OR)
Caterpillar 10, 1930, missing parts, not stuck, $1250; Bob nnn-nnn-nnnn (Rhododendron OR)
Caterpillar 22 crawler tractor, located in Cottonwood California near Redding, been sitting for years and motor is stuck, undercarriage good, crawler looks to be in good shape and complete minus side curtains, good for restoration or parts, $950; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Caterpillar 22 parts tractor, tractor #2f2126, $500; Jose nnn-nnn-nnnn (Rosemead CA)
Caterpillar 22, early, orchard style, tractor #2f8296sp, $1500; Jose nnn-nnn-nnnn (Rosemead CA)
Caterpillar 30 like-new crank, $250; radiator support, $200; Buck nnn-nnn-nnnn (Greenville IL)
Caterpillar 30, 1926, for sale or trade by second owner. Unrestored with original canopy and bill of sale from first owner. Runs on propane, price reduced to $3500; Richard Watson nnn-nnn-nnnn or xxxx@xxxx.xxx (Gridley CA)
Caterpillar 30,1928, PS2811 top mount seat, stamp pads, $3500; Jose nnn-nnn-nnnn (Rosemead CA)
Caterpillar D-2 5J series wide gauge tractor. Tractor runs good, has a hydraulic bulldozer blade on it, brand unknown. Undercarriage fair, $2500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar D-7 3-T series, 1948 model year, tractor runs great. Has an electric start pony that runs well. Tractor has hydraulic assist steering and forward/reverse lever. Undercarriage is good, grousers are a little low. Has a small oil leak on one final drive and radiator needs a few small leaks fixed. Tractor is bare with no attachments or accessories, $4000; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar parts: Ensign carbs for Cat 20, 30 AEL and 60 AAE all rebuilt, $300 each. D2 track adjuster covers, new, $450 pair; D4 engine side panels, $100; nnn-nnn-nnnn or xxxx@xxxx.xxx (Beavercreek OR)
Caterpillar parts: track rails with sprockets for Caterpillar 22 or will fit D2, $300. Starter for 92 series Detroit, $50 or trade. Power take-off for a Cat D2, $400; Jim Ronsse nnn-nnn-nnnn (Chicago Park CA)
Caterpillar small 15, 7-C, 1932. Barn fresh, driver, $7995; Bob nnn-nnn-nnnn (Rhododendron OR)
Cletrac MG1 US Army Bomber Nurse, 1942, 13500 lbs, maximum speed 22 mph, max drawbar pull 7000. Has 6 cylinder Hercules gas. Restorable, great project, needs gas tank, does not run. Buy a piece of WWII history, $1800 or offer; Paul Valentine nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)
Co-op E-2, 1953. Has rockshaft and 3 pt hitch with drawbar. An older restoration. Runs great,
$2500; Dan nnn-nnn-nnnn (Columbia Falls MT)
Earthmaster C, 1948, N-62 Continental engine. Good front & rear tires 80%. Engine overhauled & hydraulics work good. New carb, new gear oil, restored to very nice show tractor. Stored inside, runs good, $2950 obo; M. Beld nnn-nnn-nnnn (Lynden WA)
Empire, 1948, a true orphan tractor, these tractors were built after WWII using Willys jeep drivetrains. The engine in this tractor is not original, but is a professionally rebuilt counterbalanced flathead 4 Jeep engine. All electrical has been converted to 12v (including the starter). This would make a great tractor drive tractor as it easily does 20 mph before the tire balance comes into play. Possible delivery. $3300 obo; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)
Farmall 130, #FCM 139708 & Ferguson TO-30, #SJ1266532 ? Both pretty complete, sheet metal mostly good, engines not stuck, last ran several years ago, decent rubber. Very restorable or for parts. Farmall $950 obo. TO-30 $850 obo or bundle best offer. Can email photos, you pickup; Miguel nnn-nnn-nnnn (Hollister CA)
Farmall 460 cylinder head, for International 6 cylinder 236 cubic inch diesel engine; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Farmall A, don't know the year, is owned by a friend. Call me for her number. It has a full hydraulics system and front loader; Ken nnn-nnn-nnnn (Goldendale WA)
Farmall AV, barn fresh high crop, good sheet metal and 36 inch tires, engine loose, $995, ready for restoration. Email for photos or see at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)
Farmall B, 1944, tricycle, new rubber on rear, runs very good, steers, stops good, clutch good, some noise in gear box, all gears work okay, probably worn gears or bearings. Excellent tin, $700 or trade for flatbed trailer or motorcycle; Ken Pearson nnn-nnn-nnnn (Goldendale WA)
Farmall C, barn fresh, very complete with good sheet metal and 36 inch rear tires, ready for restoration, $950. Email for photos or see at www.vintagetractors.com; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)
Farmall Cub Loboy, 1948, with mounted International 1000 loader, has new rear tires, front tires are excellent, weights in hand, rebuilt quick-tatch hitch primed and mounted, one bottom plow, homemade 3pt attachment, belt pulley gear box attachment for belt work, new bench style seat, rebuilt mag, new headlights, paint is good, no rust, loader in excellent shape, protective white paint, everything works, bucket in excellent shape also, no dents or bends, 3 chain hooks on back side and hole on front edge of bucket for pin or hitch ball, have all manuals for both pieces, tractor runs well, $4000; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx [box]
Farmall Cub parts: Four 6 volt flat back lights, good condition, needs rebuilt, $5 each; new rear mount step, $25; new undercarriage mount bar, for blade?, $30; Cub Loboy standard seat mount, $25, or all for $75; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx [box]
Farmall Cub, 1949. New rings and valve job done, plus it has a lot of cultivating tools. Tractor has been kept inside for the last 40 years. Photos are available, $2200; Jim Ronsse nnn-nnn-nnnn or
xxxx@xxxx.xxx; Jim Ronsse nnn-nnn-nnnn (Chicago park CA)
Farmall Cub, rebuilt engine and new battery, hydraulics, new rear tires, perfect sheet metal-wrong color. Fresh tune-up, has factory (Henderson, I think) hydraulic loader with trip-type manure bucket. This is truly a collector tractor, $3750; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall H and M parts as well parts tractors (engines stuck) for sale, come take a look or call. One International Super H parts tractor (stuck engine) with straight tin and grill. One 1953 Cub, not stuck, needs TLC, has seat and hood off, hood is very straight & primed. Will not part out, sold complete, $800 firm. One "A" bolster very clean, painted IH with 2150 ready to go, $275 obo. A few Paper and Steel belt pulleys for H's and M's, Cubs, $90 obo. One Cub belt pulley assembly, $100 obo. Cub Cadet parts, rear end (needs 2nd gear) frame, new front axle & misc parts. One Cub original 7hp engine in good shape with dip stick. Cleaning out my tractor shop, open to any fair offer; Chuck Verdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)
Farmall H Donaldson air cleaner assembly with jar, $20; Al nnn-nnn-nnnn eves (Elko NV)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall M, tall tractor, gas, has gear type drop boxes and 20” single front. Aftermarket wide front will also be available. Engine now running, stored inside, good sheet metal and usable tires. Make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Farmall MD tractor, runs well, good rubber, has live hydraulics, belt pulley and Behlen power steering. Sheet metal is good, $2750; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Farmall sheet metal from A to 450 plus misc parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super C drawbar, mounting frame & swinging bar, $25; Al nnn-nnn-nnnn eves (Elko NV)
Farmall Super C, 1954, Fast Hitch, front loader, 2 pt to 3 pt Danuser blade, wide front with rear weights, rear chains, very good tires, new paint. Runs excellent, $2650; call cell nnn-nnn-nnnn (Elko NV)
Farmall Super C, 1954, narrow front, with C-20 fast hitch plow, one-bottom fast hitch plow, 3 sets rear weights, 1 set front weights. Excellent Goodyear tires, IH wind breaker, IH umbrella, Fast-Hitch drawbar, rear pulley attachment. Very nice paint and seat, $2850; call cell nnn-nnn-nnnn (Elko NV)
Farmall Super C. Good original condition with strong engine and good sheet metal. Includes both single narrow and wide front axle. Tractor has aftermarket cultivator frames front and rear, $2000; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Farmall Super M, motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Ferguson TO-20, straight sheet metal, good paint, good rear tires, $2500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 800 tractor, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 800, engine runs very good, noise in clutch area like a dry throw-out bearing, $3000; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 841 Powermaster, 1959, engine stuck, very good sheet metal, trans 12 speed forward, 3 speed reverse, hydraulics, 3pt, $950; Keith Smith nnn-nnn-nnnn (Rio Oso CA)
Ford 8N, restored, original rubber, newer paint, lights, front bumper, sn 177. Very, very nice, $3000; Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford 8N, running, with Sherman combo trans, $2750; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 8N,1950 and 2N, 1943, both in good condition with some restoration. Also, to be sold with or separately: Wagner loader, Dearborn cultivator, back blade and rock rake. Pictures upon request, $6000 for all or can separate and deal; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
Ford 900 series, 1955, gas, power steering, dual hydraulics, 3 bottom plow, single front wheel, hi-crop, runs good, looks good, plowed with it this spring, $3500; Luther nnn-nnn-nnnn (Battle Ground WA)
Ford 9N, 1941. Good tractor but needs an exhaust valve. Runs. $700 with box scraper, $500 without box scraper; Joe nnn-nnn-nnnn (Railroad Flat CA)
Ford NAA, 1953, good, $3250; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Fordson collection: Decided to see if I could find a single buyer to buy all my Fordson tractors and parts. I have around 9 Fordson tractors, none of which run and some that are parts tractors. Includes one Fordson converted to a road roller with cement filled rear wheels, have a couple with the Hamilton aftermarket transmissions, some are on steel wheels and some on cut down rims, aftermarket drawbars, aftermarket rear brakes for Fordson, lots of extra parts. A 1919 engine block which has been bored and with line bored bearings. $6000 for all; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR)
Fordson gear driven bracket for high-tension magneto with built-in governor. Type MG24,.$200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Fordson magneto cross drive complete unit except mag decent shape, $375; Robert Middleton
nnn-nnn-nnnn or xxxx@xxxx.xxx (Sparks NV)
Fordson PTO "Plymouth gear shift pulley" #B6712, $1000 obo; Jose nnn-nnn-nnnn (Rosemead CA)
Fordson TRACKFORD crawler, 1923. One of two known to exist. Totally restored and runs great. A big hit at tractor shows. Motor, transmission, clutch, rear end all redone. Nice paint; Mike nnn-nnn-nnnn (Moore MT)
Fordson, 1925, #505411, $2500; Jose nnn-nnn-nnnn (Rosemead CA)
Harris Power Horse with 4 wheel drive and Chrysler industrial engine, $4500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International 3414 tractor chassis, no motor, otherwise complete. Usable rubber. Would be cool with V8 adapted, $500 or trade for scooter or motorcycle; Ken Pearson nnn-nnn-nnnn (Goldendale WA)
International 350 Hi-Utility fast hitch, 1 remote runs needs ta work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 460, utility tractor, with 282 cid diesel engine, $1800 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International T-6 Bulldozer with hydraulic angle blade. Nice old cat- needs some WD-40 and love, $2750; Don Chappell 503- 679 -2726 (St Helens OR)
International T6 late model, parts only. Engine (stuck) through final drive sprockets only. Said to have rolled off trailer before the idiot started cutting it up. Saved what I could, $1000 obo; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
International TD 9 tractor & disc, $3500; Sandra Kerr nnn-nnn-nnnn (Newark CA)
John Deere 30" cast centers for rack and pinion axles, fits 50 to 730 and newer, part # F1590R, $50 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 40 waffle rims: 24 inch with usable tires one mounted and aired up. One tire and tube with waffle rim unmounted. Tire size 11/2 X 24 inch. Selling in pair only, $975; Dave Pearsall nnn-nnn-nnnn. Email for photos xxxx@xxxx.xxx (Olympia WA)
John Deere 40U with 3pt. runs good , older restoration, $3500. Call or text Jim nnn-nnn-nnnn (Ducor CA)
John Deere 420 (5 roller) parts; Hans Strauss nnn-nnn-nnnn (Stevenson WA)
John Deere 420U, 1957, sn 106102, restored, wide front, 4 speed, PTO, runs and drives well, new tires on front, 80-90% rear, rear wheel weights, new brakes, 3pt with correct 3rd link, 4 year old paint job with Jorde decals, Lindstrom Sunbrella custom cover, both manuals and all paperwork, with restored 415-A 3pt integral 2-14 bottom plow, new Tyler Bucheit points, extension and trash boards, bottoms are soft painted when not in use, nice original set up, $5200 firm; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx [box]
John Deere 440 crawler, loader, backhoe. Engine & transmission run good, steering clutches need work. Miscellaneous parts included, $4000; Randy nnn-nnn-nnnn or nnn-nnn-nnnn (Butte MT)
John Deere 50 tricycle, Yakima hitch, power steering, $1500, trade obo; Delmer nnn-nnn-nnnn (Yakima WA)
John Deere 50, 1955. New tires, wide front, runs, $5000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere 50, lots of parts square wide front, power steering, fair sheet metal, 12.4-38s 80% L/S bar; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 50, Roll-o-matic front end, average tires, sheet metal pretty good, has not been started for a couple years, $1000; David nnn-nnn-nnnn (Spokane WA)
John Deere 520, older restoration with John Deere hay loader and 3 pt. Runs great, paint and show it or just work it, $5000. Call or text Jim at nnn-nnn-nnnn (Ducor CA)
John Deere 530, wide front end, runs and looks good, $3200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 60 parted out, lots left: crank, head, grill, hood, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 60, 1953. New tires, paint, standard, low seat, runs, $7000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere 60, narrow front tires with Roll-o-matic. Also has 42" rear tires, $1925 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 620 LP Black Dash runs on 42" rubber with 16" single front with 3 pt no toplink Airstack new battery box, cables and seat cushions, or John Deere 720 Gas Black Dash, turns over on 42"rubber with 16"single front with 3 pt no toplink Dual Hydraulics Airstack $2750 each or $5000 both; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 70 Diesel standard, adjustable front end, runs and drived, good sheet metal, air stack, power steering. Tires 50%, pony has a bad rod, $2750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 70, 1955. Standard, gas, new tires & paint, runs, $7000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere 80, 1956. Dual remotes, both motors running good, $10000; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere A clutch pulley, $250; Buck nnn-nnn-nnnn (Greenville IL)
John Deere A, 1937. New tires, fenders, hood, and shutters. Runs good, $4500; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere A, 1945. Tractor ran last year. Will need carburetor and magneto work now. Hood is there, but rough. New exhaust pipe and stack. Tires are shot; $500; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere A, 1950, has 6 speed shift quadrant sheet metal has been removed to get tractor ready for paint. Has new muffler and is in running condition. Needs to have brakes rebuilt, $600 obo; Dave nnn-nnn-nnnn (Aurora OR)
John Deere AR unstyled headlights & brackets, $250; Buck nnn-nnn-nnnn (Greenville IL)
John Deere AR, $2500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere AR, 1941. New tires, steering wheel, lights, electric start, runs, $4500; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere AR, 1946. Electric start with lighting package. This is a really nice straight original tractor. Engine is loose and will be easy to get running again. Excellent for restoration or get it running and leave it in its work clothes, $2300 CAD obo; Jon Nessel nnn-nnn-nnnn (Chilliwack BC)
John Deere B 1939 parts tractor. Factory spoke rear wheels. Engine turns over. No sheet metal at radiator. Tires are bad, $550; Kurt Spegel nnn-nnn-nnnn (Cornelius OR)
John Deere B, 1938. Long frame model, engine rebuilt, good period tires, rear spokes, very good unstyled tractor ready for paint, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939. Engine stuck. Nice original rear tires in decent shape. Hood and grills are decent. New front tires. Make offer or trade for something I might need?; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere B, 1940, rebuilt engine, good tires, $2500 cash. Picture available on Craig's list/Colorado Western Slope; Keith Kinnett nnn-nnn-nnnn or xxxx@xxxx.xxx (Delta CO)
John Deere B, 1943. Tractor runs and has nice original rear tires. Fronts tires are new with newly painted rims. Needs lots of TLC. Make offer or trade for something I might need; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere belt pulley for 40-420-430, $300; Dave nnn-nnn-nnnn (Aurora OR)
John Deere BO Lindeman crawler. Original condition, ready for restoration. The engine has brand new rings & gaskets, and a fresh valve job. It is running and drives, but will need the rod bearings done. Seat and bracket not original, and is missing a few track pads. Other than that, this unit is complete. This is a cheap way to get into a Lindeman crawler, $4000 CAD obo; Jon Nessel nnn-nnn-nnnn (Chilliwack BC)
John Deere BR, 1936, on steel. Brass tag, runs good, $5995; Bob nnn-nnn-nnnn (Rhododendron OR)
John Deere BR, 1944. Hand start, good tires, new fenders, runs good, $2700; A. Knutson nnn-nnn-nnnn (Bow WA)
John Deere BW, 1943, runs good, spoke front wheels; Richard Duval nnn-nnn-nnnn or rdduval40 @gmalil.com (Anderson CA)
John Deere crawler: selling all crawler parts, books, John Deere tools. Call for needs, first come gets the better parts; Ralph Newman nnn-nnn-nnnn or nnn-nnn-nnnn (Wolf Creek OR)
John Deere D, 1928. Tractor is mostly there, has the carb, a magneto etc, fenders are rough. I bought it in pieces and started putting it back together. Radiator, fuel tank, hood and fenders and some other parts are still off the tractor. Has cut down rubber front tires and steel rear. Also have a set of 28" rear wheels for rubber that can go with it. Located in Stanwood, WA. $2500 obo; Chris nnn-nnn-nnnn (Camano Island WA)
John Deere D, 1935, engine free, tires fair, hood good, has not been started in years, $1900; KeithSmith nnn-nnn-nnnn (Rio Oso CA)
John Deere D, 1941 styled D, sheet metal very straight, paint is good except oxidized, $3500; Warren Harger nnn-nnn-nnnn (Central Point OR)
John Deere D, 1946, styled. Complete but engine stuck, $1675; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere Early A and AR magneto Fairbanks Morse DRV2A, rebuilt in great condition, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere fender, left rear for 7420 or 7520, may fit others, in very good shape. Newer series fender fits 6615-6130, 6125-6330, 7430-7530, 7130-7230, $220; Carol Gay nnn-nnn-nnnn (Keno OR)
John Deere G, 1937, serial number 1528. Older restoration. Cylinder head recently rebuilt. New front tires. Rears are decent. Has replacement radiator and components, $6000 obo. Email or text for pix and more info; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)