July 2017 - Misc. For Sale

All Classified Ads

Air powered carton stapler: Joins two layers of cardboard with copper staples. CCC model RC1000-AB 3776. Works good and includes about 20 rolls of staples, $50. Staples are heavy so pickup if possible; Loren nnn-nnn-nnnn (Lakeport CA)

Backhoe: International 3414, ran when parked but shuttle gear box split. Good front loader, fairly new pump, usable backhoe that could be adapted to something else, $1500 or trade for flatbed trailer or motorcycle; Ken Pearson nnn-nnn-nnnn (Goldendale WA)

Baler: John Deere 214 WS 2-wire baler, runs with Wisconsin V4, good condition, always been stored inside. Make offer; Larry Alvares nnn-nnn-nnnn or xxxx@xxxx.xxx (Flournoy CA)

Blacksmith items: Forges $150 to $275. Hammer Heads $14 ea. Tongs $18 ea. Hardys $16 ea. Anvils $250 to $600. Leg vises $120 ea. Large swedge block $685. Mandrel $750; Ron nnn-nnn-nnnn (Chicago Park CA)

Boat Trailer with tandem axles, $500 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Box scraper, $200 obo; Joe nnn-nnn-nnnn (Railroad Flat CA)

Brush Hog rotary mower, 6', PTO drive 540 RPM, 3 point mount. Good condition, make unknown. This is a big heavy duty mower. Can send pictures, $700 obo; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Buda TU and HTU; Buck nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Caille outboard motor, sn 35917, manufactured between 1915 and 1930. 5 speed adjustable pitch prop. Evinrude magneto pat. 1915 to 1916, $2500 obo; Eldon Kerns nnn-nnn-nnnn (Goldendale WA)

Camp trailer: 1954 Ranger pop-up camp trailer. Only about 12 or so of them still exist out of 200 made for 3 yrs. It needs work fiberglass repair on top and wood work on inside. Some of the side covers are there. I have done the wheel bearings and put better tires on it. WA. title, $950 obo or part trade?; Randy Cooper nnn-nnn-nnnn (Republic WA)

Carburetors: a) Rayfield, all brass, Model L2, 1 1/4 venturi, patented 2/20/1911. b) Kingston, brass carburetor with steel bowl, Model L3, 1 3/16 venturi, patented 3/9/1915. c) Zenith Model T4X, 1 5/32 venturi, patented 2/29/1908; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Case Ditcher Trencher, older, small, rubber tire 4 wheel drive, Fleetline series. Has two cylinder Wisconsin engine, decent tires, articulating steering, nice blade and 6 foot auger. Has been sitting for years, motor is stuck, fix up or use for parts, $1200; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Chrysler Industrial 6 cylinder flat-head engine from old combine. Ran when it was put in storage, $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Circular saws have 3, 2 with blade, $120 for all three; nnn-nnn-nnnn for more info (Connell WA)

Coffield washing machine. Yard art or parts. Make offer. Try to get north of $40; Jon Rodgers nnn-nnn-nnnn (corrected number) (Sonora CA)

Combine: #64 McCormick pull-behind combine, engine driven. Some new belts, canvas good, $750; call nnn-nnn-nnnn (Connell WA)

Commercial paper shredding equipment: Amerishred paper shredder, Selco baler, sorting conveyor with bin-tipper and elevator-style conveyor. Photos available by e-mail. All equipment in very good condition and ready to use, (start a business?), $20000 or best offer; Jim Grove nnn-nnn-nnnn or xxxx@xxxx.xxx (Anacortes WA)

Demco/Victoria Hijacker Premium Ultra-Slide bed mount 5th wheel latch mechanism for 16k gvw trailer, less bed mount rails (rails available from manufacturer separately), $600; Bill nnn-nnn-nnnn (Centralia WA)

Drag saws: Vaughan, have two. On runs. Both look good. Complete with spare blades. Both $350; Ed Laudert nnn-nnn-nnnn (Washougal WA)

Electric Motors: Dayton 2 hp Farm Duty electric motor. T Frame. 115V or 230V. 1740 rpm. reversible. 1-1/8 inch shaft. Listed in Grainger's 1984 catalog. Stock #6K313; 2 hp electric water pump motor, 3450 rpm. New, $100; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Four IH-185 Unit Planters, $250 each; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)

Front end loader: Minneapolis Moline hydraulic loader, 68 bucket, complete, $750 obo. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Front end loader: Westendorf TA76, 8' bucket, complete. Loader is rated for tractors up to 140hp, $1400 obo. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Gas engine: 1940's vintage 4 cylinder L head engine. Looks just like the Ford N engines. Engine turns over. Was in a Military Onan gen-set. It is complete, with oil bath air cleaner, carb. Wico mag. There is no starter as you spun the main generator, $950; Jon Rodgers nnn-nnn-nnnn (corrected number) (Sonora CA)

Hay rake: John Deere, usable, has two car type tires in front and two little tires in rear. Can load, $325; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Horse drawn antique farm equipment: Sulky $875. Plow $350. Hay rake $350. Fresnos $150 to $350; Ron nnn-nnn-nnnn (Chicago Park CA)

Howard 40" rotovator, model HN 812 B 40, ready to go to work, hardly been used, $700; Bill nnn-nnn-nnnn (Centralia WA)

Implements: 3pt 5-shank antique cultivator, $500. 3pt 2-way scoop, $150. 3pt 1-bottom 2-way Lindeman plow, $100; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Implements: Allis Chalmers belly mount grader blade, $300. AC small tractor 1-bottom 2-way plows (make offer); Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Implements: Massey Harris front cultivator, no shanks, $70; Massey Harris sickle mower - 7', $95; Massey Harris 7' Disk, 1 gang, $135; Farmall Cub one-bottom plow, $125; nnn-nnn-nnnn for more info (Connell WA)

Implements: Side delivery rake on steel wheels, $125. Manure spreader, John Deere on rubber, $125. Both are yard art; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Ingersoll Rand 175 compressor with hoses, Sandstorm sand blast pot & Trinco 36" blast cabinet. Compressor needs some work,$500 for all; Mert Griffin nnn-nnn-nnnn (Clatskanie OR)

International gang 10ft disk in fair shape, $300 obo. Cleaning out my tractor shop, open to any fair offer; Chuck Verdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)

John Deere baler, 1952, Wisconsin motor, great condition. Good tires. Has not been used in 3 years, $600 obo, moving must sell; Joe nnn-nnn-nnnn (Railroad Flat CA)

John Deere implements, sickle bar, plow, blade, all for $525, trade obo; Delmer nnn-nnn-nnnn (Yakima WA)

John Deere PTO tire pump, with hose, $125 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Johnson 5-1/2 hp outboard motor, 1958, with fuel tank, hasn't been run or used for a few years, $150; Bill nnn-nnn-nnnn (Centralia WA)

Massey Ferguson items: new MF 2-14 plow shares, $125. MF LH 10 step extension easy up, $75. MF #21 vertical muffler, 1-1/2 mount to manifold; Iver nnn-nnn-nnnn (Vancouver WA)

McCormick 2-14 #8 plow, nice rubber & paint, extra shears, rope trip, $125; call cell nnn-nnn-nnnn (Elko NV)

Milling machines: Gorton mill and Bridgeport mill; Buck nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)

Misc: Pull-behind grader, 8 ft. blade, around 1918 Mack truck, both yard art now, need restoring, very complete, also have Fordson, and a baler, all iron belongs to non-profit group, need to move, located New Castle CA; Eric Fiddyment nnn-nnn-nnnn (Granite Bay CA)

Mower: Farmall Cub sickle bar mower needs pitman arm stick, $75; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oil tanks: Two 15 gallon bulk oil tanks with hand pump, circa 60's or 70's style, $50 for both; Bill nnn-nnn-nnnn (Centralia WA)

Old cast iron water pumps; Ron nnn-nnn-nnnn (Chicago Park CA)

Pipe wrench, 36 ridged, like new, $90; Iver nnn-nnn-nnnn (Vancouver WA)

Plow: Ford Dearborn 3pt two-bottom plow model IO-I58, nice, $275; Ed Laudert nnn-nnn-nnnn (Washougal WA)

Plow: International 2-14, rope trip, rubber tires, new paint, extra plow shares, with manual, $125; Al nnn-nnn-nnnn eves (Elko NV)

Plow: John Deere 3 point 2-10 bottom plow, $150; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Plow: John Deere 680 6-16 pull plow Big beam correct for 830s, need some work, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Plow: One-bottom plow for a John Deere M, $300 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

Plow: two-way plow for John Deere Model M, one 18 inch bottom each way, nearly new condition, $150 obo; Larry Alvares nnn-nnn-nnnn (Flournoy CA)

Plows: International 3-bottom plow, $700; John Deere 4-bottom, $700; one single ditching, $200; one big ditching plow, hydraulic, $500; Sandra Kerr nnn-nnn-nnnn (Newark CA)

Powermatic Houdaille 6 jointer, model 50, table size 7 x 48 Good condition. Can send pictures, $400 obo; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Rake: John Deere 858 A side delivery rake good condition, make offer; Larry Alvares nnn-nnn-nnnn (Flournoy CA)

Reaper: International Daisy folding reaper, fully restored, $2500; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Redwood level, 90 years old, 26, $50; Iver nnn-nnn-nnnn (Vancouver WA)

Roofing: Hi-rib, 36, 26 gauge galvalume roofing. Approximately 125 pieces, about 21' long. $40 per piece; Ronn Boehlke nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Setting for 6: Gibson Amber Waves pattern, Issued between 2004 and 2007. Picture of John Deere 730 on each piece. 6 salad plates, 6 dinner plates, 6 soup/cereal bowls, 6 coffee cups. Very light use, no chips. One coffee cup has a crack at bottom of handle, top okay. Very few replacement pieces available. Some pieces available on eBay but are expensive selling separate. Asking $300. Excellent collector pieces or for use; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx [box]

Sharpening equipment: steel & carbide sharpeners, 5 machines with accessories setup for your own shop, $5750; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Snow chains: For big rigs. 3 sets cable chains, new in box for 10:00-20 or 11:00-22.5, $50 per set; new in bags a set of heavy duty double railers, real chain with grabber bars, 10:00-20 or 11:00-22.5, $350 set; Bob Folk nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx [box]

Snowmobile: old Skiroule for parts or restoration, has been sitting for years, hood is cracked, do not know model, showing 1064 miles on speedometer, haul it away for $100 obo; Carol Gay nnn-nnn-nnnn (Keno OR)

Storage tanks: Heavy duty for fuel etc. 300 gal. $195, and 1300 gal. $695. The larger tank can be separated into 300 and a 1000 gal tanks which are bolted together. Photos available by e-mail; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Shingletown CA)

Tank: stainless, appox. 700 gallon, excellent condition, $1500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Travel trailer: All original 1964 Terry Travel Trailer, 15' LOA, 12' cabin with 2' overhead: stove, oven, sink with pump, refrigerator, toilet, electric heater, propane tanks, electric lights and propane lights. Rear entry, will sleep 4 with sliding overhead bed and sliding lower cushions. Lots of windows and very good headroom. This trailer is very clean and has not been used since 1999. Has been stored inside. Used very little since purchased new by the original owner. Condition is 9 on a 1-10 scale, $2850. Call or text Gene nnn-nnn-nnnn (Centralia WA)

Wagon: John Deere farm wagon #967, new tires, bearings, seals, sand blasted, primed & painted, $2500; Phil Wall nnn-nnn-nnnn cell (Enumclaw WA)

Water pump: 6X6 Meyers bulldozer flat belt driven, pat. date 1921. Looks good, newly painted and detailed, $250; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Waukesha ECU engine, 31 / 4x4, G-20759 1750LD, clutch and pulley, $600 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Windmill: 10 ft Aermotor windmill (802), 25 ft tower, windmill rebuilt, new hub, shafts, bearings, tower has new mast pipe, $3500; Tony Giefer nnn-nnn-nnnn (Lindsay CA)

Windmill: 8 ft Fairbanks Morse windmill, 20 ft tower, in two sections for transport, good condition, no bullet holes, etc, $1600; Tony Giefer nnn-nnn-nnnn (Lindsay CA)

Wisconsin V4 engine. Ran when it was put in storage, $350 or good offer; Larry Jacobson 801-54-3904 or nnn-nnn-nnnn (Salt Lake City UT)

Wood cook stove: "Duchess" wood burning cook stove made by the Montag Co. Good working condition; nnn-nnn-nnnn (Bay Center WA)