August 2017 - Engines & Parts For Sale

All Classified Ads

Associated 1-3/4 hp, sn 30566, Chore Boy hopper-cooled engine on steel wheeled cart. Low compression. Extra parts engine included, $650; Rich Hanna nnn-nnn-nnnn (Hayden ID)

Bettendorf trucks made in Bettendorf Iowa. Suitable for 5 hp engines and larger. Drop center in very good condition, $500. No shipping, must pickup in Cottonwood, AZ; Gene DeCamp nnn-nnn-nnnn (Cottonwood AZ)

Bulldog 1-1/2 hp in excellent condition. Made by Bates and Edmonds for Baker and Hamilton, San Francisco. Sumpter magneto. Original muffler. Splash guard, gear guard, brass grease cups. Original starting crank. Older restoration with a few small paint chips. Shows very well, red with silver head. Wadsworth lubricator, $2000 or $2350 with cart. Call for more photos; Joe Olsen nnn-nnn-nnnn (Paradise CA) [see 2 photos]

CA Engine. Commercial 60 hp tank-cooled engine made in Los Angeles, CA. in 1915. Only known 60 hp type C engine. Runs well on propane. Easy to start with air. I have started it in the past throwing it back against compression. This 8-ton engine is mounted on a 3 axle dedicated gooseneck trailer (CA license). Electric start gas air compressor for starting. A 6-inch United Pump made in Oakland, CA is belted to the engine and can pump water for shows. The engine has not been painted. Has been shown at several shows. Complete unit is $18000. Will sell the engine separate for $13000. See video on Facebook; Wilbur Reil nnn-nnn-nnnn (Davis CA)

California engine: Commercial 60 hp tank cooled engine made in Los Angeles, CA. in 1915. Only known 60 hp type C engine. Runs well on propane. Easy to start with air. I have started it in the past throwing it back against compression. This 8 ton engine is mounted on a 3 axle dedicated gooseneck trailer (CA license). Trailer has an electric start gas compressor for starting. A 6 inch United Pump made in Oakland, CA. is belted to the engine and can pump water for shows. The engine has not been painted. Has been shown at several shows. Complete unit is $18000. Will sell the engine separate for $13000; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Carburetors, old, have three: Rayfield, all brass, model L2, 1-1/4 venturi, patented 2/20/1911. Kingston, brass carburetor with steel bowl, model L3, 1-3/16 venturi, patented 3/9/1915. Zenyth model T4X, 1-5/32 venturi, patented 2/29/1908; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Cart: 5 hp Galloway cart. Heavy cast iron and steel construction, $500; John Billing nnn-nnn-nnnn or xxxx@xxxx.xxx (Edgewood WA)

Chrysler Industrial 6 cylinder flat-head engine from old combine. Ran when it was put in storage, $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Economy 1-1/2 hp JK, with good mag. Some extra parts on a cart. Not running, stored inside, $300; Rich Hanna nnn-nnn-nnnn (Hayden ID)

Economy 7 hp, 1920, easy start - pulls slow, on custom 6" drop center steel cart, all pin striped, $2500 obo, seven other engines available; Dale Somers nnn-nnn-nnnn (Medford OR)

Fairbanks 1-1/2 hp, hopper condenser cooler. Needs work, stuck, $250 or offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks 6 hp and Fairbanks 3 hp engines, $400 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fairbanks Morse 1-1/2 hp headless on iron-wheeled wagon. Good runner; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Fairbanks Morse 20 hp Z tank-cooled engine built in 1920 on iron wheel cart. Completely restored and painted. Running. Has been shown at several shows. Few of the 20 hp are still around, $8000. See video on Facebook; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Fairbanks Morse 25 hp Y early style with exhaust pot, $2700 obo; Jose Carrillo nnn-nnn-nnnn or xxxx@xxxx.xxx (Rosemead CA)

Fairbanks Morse 25 hp YHB diesel engine. 10.5" Bore X 13" stroke, rated 25 hp at 325 rpm, manufactured 1929. Engine weight 7600 pounds, stands 63" tall, and has 60” x 7" flywheels. Comes mounted on its own street-legal tandem wheel trailer, electric brakes all 4 wheels. I have run it at various local shows for 10 years, $3000; Karl Righetti nnn-nnn-nnnn or xxxx@xxxx.xxx (Santa Rosa CA)

Fairbanks Morse 3 hp Z engine with mag. Some work done, turns free, $275; Dave nnn-nnn-nnnn (Aurora OR)

Fairbanks Morse YHB, late style with exhaust pot, $2700 obo; Jose Carrillo nnn-nnn-nnnn or xxxx@xxxx.xxx (Rosemead CA)

Fuller & Johnson 1-1/2 hp vertical pump jack, in good condition, $500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

Galloway: rare 8 hp 1916 Galloway. Recent valve job, new rings, new connecting rod babbitt, and rebuilt tri-polar Webster magneto. Includes the original cart, starting engine, and all steel buzz saw (not Galloway) or can be sold separately, $2500. Please call for photos; Larry Denicke nnn-nnn-nnnn (Patagonia AZ)

Ideal air-cooled engine, $500; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

John Deere LUC engines (2), each $150; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (La Grande OR)

John Deere LUC power unit, 2 cylinder, 12 hp. From John Deere 12A pull-type combine. Very good metal, pulley and clutch. Exhaust pipe broken off, $400; Rich Hanna nnn-nnn-nnnn (Hayden ID)

John Deere W power plant, runs good, price reduced to $3995; Bob nnn-nnn-nnnn (Rhododendron OR)

LeRoi 8 hp MH3 two cylinder upright on steel wheeled cart, not stuck. Stored inside for 25 plus years. Used to run buzz saw, $300; Rich Hanna nnn-nnn-nnnn (Hayden ID)

Mohawk marine engine with magneto, $325; Crescent marine made in St Louis MO, 1911 only (?), $300; Missouri marine engine, $150; Buck nnn-nnn-nnnn (Greenville IL)

Monitor 8 hp HJ, 1918, engine on cart with 5" Goulds pump and trailer, $3800; Jose Carrillo nnn-nnn-nnnn or xxxx@xxxx.xxx (Rosemead CA)

New Way 2-1/2 hp vertical, sn 1956. Good shape, needs restored. Have new fan shroud in box, $900; Les Wallace nnn-nnn-nnnn (Oak Grove OR)

Novo 2 or 2-1/2 hp. No tag. Runs with external gas tanks and adapted carb, car points, coil & battery, $450; Rich Hanna nnn-nnn-nnnn (Hayden ID)

Parsell & Weed model engine. Machining done on CNC. Top quality. Engine mounted on Oak base with copper cooling tank and brass plumbing, $2000 plus shipping; Gene DeCamp nnn-nnn-nnnn (Cottonwood AZ)

Peerless 2 hp vertical. (Bates and Edmunds) on iron-wheeled wagon. Runner; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)

Red Wing model, air cooled. Sold by PM Research for $3000. Mounted on an Oak base and coupled to an old style water pump. Displayed at 2 shows, excellent condition, $2500 plus shipping; Gene DeCamp nnn-nnn-nnnn (Cottonwood AZ)

Ruston Hornsby 17 hp side shaft diesel engine mounted on trailer. Has diesel engine and compressor for starting. Trailer mounted ready to pull at highway speeds and ready for show, emailed photos available, $7500; Buster nnn-nnn-nnnn (Yuma AZ)

Sattley 1-1/2 hp, sold by Montgomery Wards & Co, sn75030. Older restoration, $450; Mark Foster nnn-nnn-nnnn or xxxx@xxxx.xxx (Mt Shasta CA)

Union 7 hp marine engine for sale. Fully restored, San Francisco built side shaft engine with make & break ignition. Vertical side shaft powers igniter, water pump, valves and low tension magneto. This engine was always fresh water cooled and never in salt water. Recently restored with new rings, valve job and bearings. I have only seen one other Union engine of this style so it is rare, and it runs slow and smooth like all Unions. $6000. Email me for photos; Bill Prine nnn-nnn-nnnn or xxxx@xxxx.xxx (Amity OR)

Victor (International Harvester) 20 hp screen cooled engine built in 1912 on iron wheel cart. Has the original sub-base and clutch pulley. Everyone stops to look at this one. This 4 ton + engine has been completely restored and painted. It is running and has been shown at several shows, $12000; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Waukesha ECU 31 / 4x4, G-20759 1750LD, clutch and pulley, $600 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Western 16 hp tank cooled engine mounted on an original wench base. Made in Los Angeles Ca. in 1917. Older restoration. The unit is mounted on a manufactured dedicated 2 axle trailer ( CA license) that has built in jack stands for showing. The engine and wench work. Comes with a frame and a small cable pulley that erects into a 10 ft. tower. There is also an excellent original ore bucket. I have shown it at several shows in the past. A real crowd pleaser. Rubber tires are old but still hold air they would need to be replaced if you are towing it much. $12000; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Western 40 hp,1923, throttle governed, $3200 obo; Jose Carrillo nnn-nnn-nnnn or xxxx@xxxx.xxx (Rosemead CA)

Wisconsin V4, ran when it was put in storage, $350 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Wisconsin V4, stuck. Electric start, $100 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Witte 4 hp headless, 1915 with brass tag. Complete, not running, on skids, $600; Rich Hanna nnn-nnn-nnnn (Hayden ID)