December 2017 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, 1939. Runs good, electric start, sickle mower, older restoration, $3200; Ron Ebert nnn-nnn-nnnn (Penryn CA)

Allis Chalmers G, 1948. Runs good, electric start, rare extra low first gear, sickle mower, older restoration, $4500; Ron Ebert nnn-nnn-nnnn (Penryn CA)

Allis Chalmers M crawler with blade, runs great, one track tensioner needs repair, $1000; Tim Crockett nnn-nnn-nnnn (Centralia WA)

Allis Chalmers RC, 1939, rare, restored, tires-fair to good, starts and runs strong; Stuart nnn-nnn-nnnn (no texting) (Chico CA)

Allis Chalmers WD hi-crop, 1952, wide front, spin out wheels with weights, runs good, new parts, $1500; Gerald nnn-nnn-nnnn (Moyie Springs ID)

Allis Chalmers WD, 1948, wide front end. Runs good, $1700; Bernice Brassfield nnn-nnn-nnnn or xxxx@xxxx.xxx (Tulare CA)

Case 18-32 crossmotor. 1925. Nice complete, straight tractor w/. fender extension on the furrow side. Engine is seized and like most of them, it needs an exhaust manifold. This would be a great tractor to restore, or leave it in its work clothes. This tractor does not look to have been abused during its working life and should be easy to get running again. Asking $4900 CAD. Open to offers and/or interesting trades. Email, text or call; Jon Nessel nnn-nnn-nnnn (Chilliwack BC)

Case CO, 1929, orchard tractor on cut off wheels. Engine stuck, $500; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Case S, 1943. Engine free, not running, good sheet metal, $500; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Case VAH, 1948, high crop in good restorable condition. Sheet metal very straight, engine turns over, tires fair. Only 2016 built, $1400 obo or trade. What do you have?; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Caterpillar D-2 5J series wide gauge. Tractor runs good, has a hydraulic bulldozer blade on it, brand unknown. Undercarriage fair, $2500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2 narrow gauge model, 3J, both motors turn over, good undercarriage, something locked up and will not roll, been sitting for four years, very fixable restorable crawler tractor, no blade, still quite original, I can help load with my forklift, $950 obo; Happy Holidays to all, Joe

Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Caterpillar D4 6U-626 not running, angle blade, complete cat. Needs work. Come look; Don Chappell nnn-nnn-nnnn (St Helens OR)

Caterpillar D4 with cable blade, LeTourneau with 6 wheel heavy trailer, complete. Last ran 15 years ago. Trailer included, $5000; Stan Lucas nnn-nnn-nnnn (Long Beach CA)

Caterpillar D-7 3-T series. Tractor is a 1948 model year, and runs great. Has an electric start pony that runs well. Tractor has hydraulic assist steering and forward/reverse lever. Undercarriage is good, grousers are a little low. Has a small oil leak on one final drive and radiator needs a few small leaks fixed. Tractor is bare with no attachments or accessories, $4000; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar parts: Rebuild head for D8800 D7 engine. Fits T and M series dozers, $200. 1F9672 is what I see as a casting number. D2 head with valves. Taken off a non-running tractor that was full of antifreeze. 4F1599 is the casting number on this head. Also have D2 /D4 pony carburetors, D7 / D8 pony carbs, four Bosch Magnetos, one Eisemann Magneto. Trying to clear out some clutter so make an offer!; Chris nnn-nnn-nnnn (Stanwood WA)

Clamp-on duals: two 12”x24”. One with no tire, one with 14” x 24” tire (40% good). Set $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Cletrac HG 42, have three: one without engine, some extra parts, one has a cargo winch, $1500 for all; Larry Severance nnn-nnn-nnnn or 541-0517-8331 (Dexter OR)

Cletrac HG with Anderson Blade, circa 1948. Runs, $2200 obo; Richard Olson nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Cletrac W crawler with side curtains, complete, $1000; Larry Severance nnn-nnn-nnnn or 541-0517-8331 (Dexter OR)

Co-op 2, fix up or parts, dated 1938, $500; Gerald nnn-nnn-nnnn (Moyie Springs ID)

Cylinder head for International 6 cylinder 236 cubic inch diesel engine from 460 Farmall. $180 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Drawbar for Ferguson 20 or 30, attaches to the lift arms, $20; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Earthmaster C, 1947-ish, sn c1988. Mostly complete except for a leaky radiator, missing starter adapter and air cleaner. Also has part of the sickle mower attached minus the blade. Was started and driven about 3 years ago. Can email pictures. $500; Randy nnn-nnn-nnnn or xxxx@xxxx.xxx (Central Point OR)

Empire, 1948, these tractors were built after WWII using Willys jeep drivetrains. The engine in this tractor is not original, but is a professionally rebuilt counterbalanced flathead 4 Jeep engine. All electrical has been converted to 12v (including the starter). This would make a great tractor drive tractor as it easily does 20 mph before the tire balance comes into play. $2900 obo; George Best nnn-nnn-nnnn or xxxx@xxxx.xxx (Beaverton OR) 

Farmall 140 engine w/carb, distributor, hyd pump 200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Farmall 340, 1958 with 1908 original hours. New front tires, rear tires 80% with no calcium. Torque amp works perfect. Engine starts easy and runs great. Has two-point hitch, not attached. Has Farmall swinging drawbar set up for pulling. Has Por-15 coating in gas tank with non-ethanol gas. Two remote hydraulics. New seat, new battery box, working lights, price corrected to $2950 obo. Local delivery possible; Gordy nnn-nnn-nnnn (Aurora OR)

Farmall 504, has a wood cutting saw on pto for cutting tree limbs, $1200; Sandra Kerr nnn-nnn-nnnn (Brentwood CA)

Farmall A, 1947, with International factory front mounted snow plow. 3 pt, PTO, belt pulley. Full wheel weights on all wheels. Good rubber, runs like new. A beautiful piece of American history. All trades considered: trucks, tractors, firearms, $3225 cash or trade; Jake nnn-nnn-nnnn (Adrian OR)

Farmall A, no engine, make offer; Rocky nnn-nnn-nnnn (Cave Junction OR)

Farmall BN and F12, Farmall 656 parts. Call or email for more info and prices; Randy Cooper nnn-nnn-nnnn or xxxx@xxxx.xxx (Republic WA)

Farmall BN, 1953, need some TLC. Tractor is clean but runs rough due to needing a carb. I have had it running. It also is in need of rear tires because they are pretty crack but do hold air. $2000 obo. You pick up; Charles Verdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)

Farmall crank, H or M, has spinner handle, $15 plus shipping; Al nnn-nnn-nnnn (Elko NV)

Farmall Cub, 1953, engine not stuck but needs TLC. Hood and grill not bent and is in great shape. This is a great project tractor, $1050 obo. You pick up; Charles Verdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)

Farmall Cub, excellent motor, new rear tires and tubes, excellent sheet metal, WRONG COLOR!! Has lights, comes with an original Henderson manufacturing company hydraulic loader with manure bucket in like-new condition. This is a very nice unrestored cub, reduced to $1950; Don Chappell nnn-nnn-nnnn (St Helens OR)

Farmall H parts tractor; Charles Verdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)

Farmall M, 1948, full restored from the ground up; Charles Verdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)

Farmall M, 1949, starts and runs great, no smoke, with factory wide front end, good tires all around, live hydraulics, steel belt pulley, nine-speed transmission, an 8 out 10 due to some small dents in hood. It's show ready, $5500 obo. You pick up; Charles Verdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)

Farmall M, good paint, straight, good running, single front wheel, fenders, hydraulics, 3 pt, $2000; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Farmall M, runs, fair shape with trip loader, no bucket, $900 or $500 with no rear tires and rims; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall spark arrester for M, 560 or others. Fits under muffler with mounted corn picker from the '50s; Al nnn-nnn-nnnn (Elko NV)

Farmall Super A industrial model, been sitting for many years and motor is stuck. Has good sheet metal, complete except for generator. Has good serial tag, FAA I 263612. Very restorable tractor, can ship, $950 obo; Happy Holidays to all, Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Farmall Super C, 1948, runs great, is an 8 out of 10, good tires all around, show ready, asking $5000 obo. You pick up; Charles Verdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Rochester WA)

Farmall Super M, needs work, make offer; Rocky nnn-nnn-nnnn (Cave Junction OR)

Farmalls: BN and F12, Farmall 656 parts; Randy Cooper nnn-nnn-nnnn or xxxx@xxxx.xxx (Republic WA)

Ford 1941 9N and 1946 2N. Both in excellent condition. $1750 each or $3000 for both. Estate sale. Well maintained by previous owner who was a mechanic. Garaged, each starts right up; Teunis Wyers nnn-nnn-nnnn (White Salmon WA) [see 2 photos]

Ford 800 tractor, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 841 Powermaster, 1959. Engine stuck, sheet metal very good. Trans 12 spd foward, 3 spd reverse. Hydraulics, 3pt, power steering, PTO, wheel weights, $850; Keith Smith nnn-nnn-nnnn (Rio Oso CA)

Ford 850, 1956, good condition, Dearborn front end loader with trip bucket. #D 6 ft box scraper with subsoilers, weight attached, 6 ft train rail. A-frame attached to box scraper to skid logs. 2" receiver trailer hitch, 3 pt hitch. Rebuilt carburetor, new battery, tire chains rear and front, $4500; Kurt nnn-nnn-nnnn (neighbor’s number, leave message) (Grangerville ID)

Ford 8N items: 8N motor, 1947, sn 8N23451. Runs, good OP, head and flywheel machined. Has new water pump and manifold. Starter and generator checked out. Carb & distributor rebuilt. Needs rear main seal, $450. Will sell bare motor for $150. 8N Ford wheel with good Alliance 11.2x28 tire, $250. Heavy duty run stand setup for 8N motors, also has Chevrolet adapter, includes radiator, $300. Have many new and used 8N parts including a belt pulley. What do you need?; Rick Murray nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Ford 8N or 9N pan seat and mounting spring, good condition, $50; Dave nnn-nnn-nnnn (Aurora OR)

Ford 8N or 9N. Complete tractor disassembled. Make offer.; Richard Olson nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Ford 8N restored, original rubber, newer paint, lights, front bumper, sn177, reduced to $2500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Ford 8N tractor engine (engine only, front distributor), fan through clutch, good oil pressure, working 6 volt charging system. Hear it run, $600 obo; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

Ford 8N, $1900. Ford 2N, $1200. Oliver 60 row crop, $800; Rocky nnn-nnn-nnnn (Cave Junction OR)

Ford 8N, recent engine rebuild, like-new tires, side distributor, $2500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford NAA, good running, straight metal, good tires, $3250; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Fordson Trackster front sprocket, in good condition, $50; Dave nnn-nnn-nnnn (Aurora OR)

FREE! Two 13.6 X 26 tires with fair rubber; Dave Gallant nnn-nnn-nnnn (Boring OR)

FREE! Two 16.9 X 28 JD Model D tires and wheels; Dave Gallant nnn-nnn-nnnn (Boring OR)

Hood: for John Deere D, 1941, may fit others, $50; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Inner tubes: Four new and unused inner tubes that fit 11.2 to 12.4 by 28 tires. This is a popular size for some Ford N tractors, $30 plus shipping each; Bob Jaeger nnn-nnn-nnnn (Renton WA)

International 1468 tractor, excellent, automotive paint clear coat, $32000; Glen Kreider call or text nnn-nnn-nnnn (Greenville IL)

International 350, sn 3903 with John Deere 35 loader, John Deere 227-001 6 ft mower, Ford 3-point blade, good T/A, runs good; $3750; Russ Shorten nnn-nnn-nnnn (Dayton WA)

International 460 utility tractor with 282 cu/in diesel engine, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International Industrial A has run, correct front axle & pto, $800; Morrie Robinson nnn-nnn-nnnn (Sedro Woolley WA)

International TD5,1960's diesel crawler with blade, hydro winch & canopy. Make offer; nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

International TD9 crawler, no blade, runs, needs battery, $1800; Sandra Kerr nnn-nnn-nnnn (Brentwood CA)

John Deere 1010 diesel dozer. Shuttle trans, good tracks, rebuilt starter, gen new wiring. Street pads, AG pads, swing drawbar, $3500 obo; Ken Boyd nnn-nnn-nnnn or cell, nnn-nnn-nnnn (Livermore CA)

John Deere 1010 dozer with winch, diesel runs, John Deere 1010 dozer with winch, gas engine for parts ; Randy Cooper nnn-nnn-nnnn or xxxx@xxxx.xxx (Republic WA)

John Deere 26" waffle wheels in great condition, no rust, good mounting holes, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 40 high crop, looks like a new tractor, totally restored, runs good, good tires, $5000; Vern Fought nnn-nnn-nnnn (texting is best) (Exeter CA)

John Deere 40 with Bush Hog and Pittsburg 5' disc with scraper blades, $3700; Ray Orlaske nnn-nnn-nnnn (North Plains OR)

John Deere 420 1957 Ag crawler (no blade) 3 point, excellent sprockets, ins & bushings, pads like new, engine turns over, $2600; Morrie Robinson nnn-nnn-nnnn (Sedro Woolley WA)

John Deere 420C, 5 roller parts blade, idlers, some running gear; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere 4430, 1975, sn 045460 R, duals, FWA 4-wheel drive, power shift, duals, cab, Model 158 loader, $17500; Russ Shorten nnn-nnn-nnnn (Dayton WA)

John Deere 530, wide front end, runs and looks good, $2340 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 60, narrow front tires with roll-o-matic. Also has 42" rear tires, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere A-B rear rim, 38" x 9". Excellent used condition, $100; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere AOS reproduction hood, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere AR tractors: Two 1935 early production 250988 & 251742, one on steel, 1 F&H rears, original tires 70-75%, $2500 for both; Morrie Robinson nnn-nnn-nnnn (Sedro Woolley WA)

John Deere AR, $1800; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere B, 1938 long frame, rebuilt engine spokes on rear, runs good, $2750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere B, 1948, sn B233078, narrow front, runs good, $1250; Russ Shorten nnn-nnn-nnnn (Dayton WA)

John Deere B, 1950 parts some new, make offer; nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

John Deere B, 1951, sn 3#B 281 313. Wide front, runs good, $1750; Russ Shorten nnn-nnn-nnnn (Dayton WA)

John Deere BR, 1945, sn 334744. Electric start, turning brakes, 26 inch rear cast wheels, radiator shutters, generator assembly with wiring for headlights. It starts easy, runs very good. The clutch is good, all the gears and shifting are good. Brakes are good. Transportation is available, price reduced to $4000; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA)

John Deere BW, 1946, very original condition. Starts and runs, $1700; Perry nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

John Deere cast iron front end support closed bottom for styled model B years 1943 to 1945. Used during the war years, good condition, $125. Also have other angle iron front supports and a press steel frame front support, $75. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

John Deere cast wheel centers for model D styled and unstyled. Casting #D2570R. For 28" rubber. Good condition good splines. I don't see any cracks, $250/pair. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

John Deere cast wheel centers for styled A and B. Set #1: Casting number A3402R for 42" rubber fits AN/AW or BN/BW bolt in hub style good condition. I don't see any cracks. 15 spline hubs included, $450/pair. Set #2: casting numbers A3419R for 38" rubber. these centers are correct for the real late styled A and B tractors. They have the 4 slot holes for wheel weights and the 4 round holes as well. Some of the earlier centers only had the 4 slot holes. Bolt in hub style. Good condition, I don't see any cracks, $250/pair. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

John Deere D, 1930, originally exported to Argentina. Older restoration, $5800; Perry nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

John Deere D, 1935, engine free, sheet metal good, tires fair, $1800; Keith Smith nnn-nnn-nnnn (Rio Oso CA)

John Deere D, 1944 steel wheel, restored. Excellent tin, starts easy, fresh paint, $4400; Bill Fox nnn-nnn-nnnn (Spanaway WA)

John Deere D, 1945, stuck but complete to go to good home, reduced to $1250 obo. Come look, make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere D, 1948, industrial, pto, new battery, dual exhaust, $4000; Gus Lukrofka nnn-nnn-nnnn (Whittier CA)

John Deere H, flywheel start. Starts easy and runs good, with 4-row cultivator; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere L, unstyled, 1938. Real good tin, good condition. Brass tag, belt pulley and new tires, $7500; Bill Fox nnn-nnn-nnnn (Spanaway WA)

John Deere LA motor parts, belt pulley & misc, make offer; nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

John Deere LA, 1941 (?), nice condition, $2000; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere MC crawler, 1948, extremely good mechanical condition, $2600; Perry nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)

John Deere MC stamped pads, have several that are in good shape, make a reasonable offer. Have other misc parts for John Deere 2 cylinder crawlers, would like to sell all, call or write with needs; Happy Holidays to all, Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere MT with cultivator, $2500; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere tractors (estate): John Deere L, 1940, sn 631315 with attached sickle bar mower. Radiator stolen. John Deere LA, 194?, complete with front push blade. No tag. John Deere L, 1938 un-styled, sn 624901. Radiator stolen by same druggies who damaged the 1940 L. The rest of

the tractor is in excellent condition. The estate is open to offers on one, two, or all three tractors and will include a plow; Al Downs nnn-nnn-nnnn (Tacoma WA)

John Deere tractors: John Deere B, 1939, engine stuck, decent tires. John Deere A, 1951, engine overhauled, problem with 2nd gear. John Deere B, 1942, runs, needs tlc, new front tires, original rear with closed tread pattern. John Deere B, 1942, runs, loose splines on clutch end of crank. Have spare parts to go with it. New rear tires. John Deere D, 1937, stuck, been through several floods, full steel with extensions and lugs. Call or email and we can discuss condition and prices; Chris nnn-nnn-nnnn (Stanwood WA)

John Deere two cylinder radiators. Top tank casting numbers: B758R, unstyled BO and BR with fan shroud top tank rusted through, $75. B2602R, late styled B with shutters, $125. B1802R, styled sn 96000-148499 with shutters and shroud, small hole in bottom tank, $100. B3566R 520/530 with fan shroud, $100. F864R, late styled G pressure cooling system non water pump bottom tank, $100. F3122R, 70/720/730 gas or diesel, $100. All radiators have not been leak checked. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

Kay-Brunner wheels, all 4 and rear weights, painted with nearly new tires 24-14.9 & 6.50-16 for '36-'38 ish John Deere AR AO AI, price reduced to $2850 for all; Bob Hunt nnn-nnn-nnnn or xxxx@xxxx.xxx (Red Bluff CA)

LeTourneau Tournapull Model D-4 self-propelled earth mover. Runs good but does need work, $6000; Vern Fought nnn-nnn-nnnn (text is best) (Exeter CA)

Long 1949 Model A tractor, total restored with new tires. This tractor has a F162 4 cyl Continental motor, only model made in 1948-49. Very rare and not many around. They have sold for $21,000 in US money. They were built in Tarboro, North Carolina. Fresh painted and runs like new. Asking $15,000 Canadian dollars. Could consider taking an Oliver 550 or 660 on trade, must be before 1960; Don nnn-nnn-nnnn (Innisfail AB)

Minneapolis Moline 445 Universal, gas, 1956, 38 hp, 13.6-38 rears, 16” fronts, 2 remotes, 3 point, 540 rpm PTO, good running condition. Can send pictures. Price reduced to $3200; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline G1000 diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals. Can send pictures. Price reduced to $3750; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline GVI, diesel, 1960, 68 hp, 23.1-26 rears, 7.50-18 fronts, cab with all glass, good sheet metal, 2 remotes, with 9 ft Cancade hydraulic, two way, front blade. Can send pictures. Price reduced to $3750; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline radiator and front nose. Missing screen but nose is in excellent condition no dents or dings. Unsure which model it fits but looks like RTU or ZTU. $100. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

Oliver 70 Row Crop, 1940. Ran when parked. Cultivators included. $1750 obo; Richard Olson nnn-nnn-nnnn (Port Orchard WA)

Oliver 80, Wheatland tractor, $1400; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Oliver Hart-Parr, 18-28 tractor, not stuck, sn 801828B, $500; Larry Severance nnn-nnn-nnnn or 541-0517-8331 (Dexter OR)

Oliver OC3, Cletrac HG, lots of cores and rebuilt magnetos and starters for these little crawlers, staring at $50 up to $200 depending on part and condition; Happy Holidays to all, Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Oliver Super 55, utility tractor, new clutch, very good tires, Great Bend Model 330 loader with new controls and hoses, 7ft 3 pt blade, $3000; Russ Shorten nnn-nnn-nnnn (Dayton WA)

Power Horse, Model A20, 1938. Made in Salt Lake City, UT, $7900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rear belly pan for John Deere 440 crawler; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Rims: New 9:x28”x6 lug rim, fits older Ford tractors, $150; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Rims: two John Deere 12” x 36”. Type: 2-rib rims. With tires (10% - 20% good). $100 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rumely Oilpull, 1923. 20-40 model G. Excellent project tractor. Engine is loose. Needs bull gears, pinions are good. Can supply bull gears for additional cost. Transmission case is damaged but comes with a spare transmission. $28000 CAD obo. Email, text or call; Jon Nessel nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Rumely Oilpull. 20-40 model G. 1923. Excellent project tractor. Engine is loose. Needs bull gears, pinions are good. Can supply bull gears for additional cost. Transmission case is damaged but comes with a spare transmission. $28k CAD o.b.o. Email, text or call; Jon Nessel nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Schramm, 1950's era, part tractor, part air compressor. Model number COUH, $2000; Gus Lukrofka nnn-nnn-nnnn (Whittier CA) [see photo in Sept or Oct 2017 WAIT]

Sherman step-up auxiliary gear box, rebuilt, fits older Ford tractors, $1200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Tires: Pair of 13.6x38 w/tubes in excellent shape 400, pair 12.5x24 diamond tread mounted on Farmall A or B rims $250. Two 9.5x24 tires w/tubes, like new, not matched, $250 or offer on any; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Titan 10-20, 1917, model TV7158. Has been stored inside. Runs good. All original parts. Good condition, $19000 obo; Ray Jeffries nnn-nnn-nnnn (Palouse WA)

Tractor collection: John Deere D, 1928, runs, $2000. McCormick orchard, 1930, runs, $1500. Caterpillar orchard, 193?, runs. Caterpillar D2 J, top seat, needs Pony, $1200. International Tract Tractor, 1929, $1500. All tractors located in San Juan Bautista CA. Selling due to death of my son; Theodore Johnson nnn-nnn-nnnn (Nevada City CA)

Tractor tires 50 percent, plus Ford wheels 14.9 - 24 pair, $250; Tim Crockett nnn-nnn-nnnn (Centralia WA)

Wheel weights. Aftermarket for John Deere approximately 1500lbs each. Casting BW705. Have 2 weights, $150 each. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)

Wheels: pair of 12 spline factory flat spoke wheels for John Deere B. Wheels are painted. One has cracked hub, the other one is excellent, $300 for the pair; Dave nnn-nnn-nnnn (Aurora OR)

Wheels: rear wheels from Massey Harris tractor, have two 10x38, one 11x38, $40 each; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Wheels: set of John Deere D spoke wheels with new 18" tires, nice, $400; Don nnn-nnn-nnnn (Winnemucca NV)

Wheels: two 10” x 26” wheels from a John Deere H. With 7 lug bolt holes, $35 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Wheels: two wheels, 12” x 36”. 9 lug bolt holes on a 9-1/2" circle. No tires, $100 each or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)