Allis Chalmers B, 1939. Runs good, electric start, sickle mower, older restoration, $3200; Ron Ebert nnn-nnn-nnnn (Penryn CA)
Allis Chalmers B with sickle bar, new tires, $750; Ray Fisher nnn-nnn-nnnn or xxxx@xxxx.xxx (Tucson AZ)
Allis Chalmers B, 1940. New paint, tires, seat, steering wheel, and brake bands. Runs great, a real collector and parade tractor. Thinning out the collection, $3000 obo. Pictures upon request, email or phone for more info; Lance Brazell nnn-nnn-nnnn or xxxx@xxxx.xxx (Sebastopol CA)
Allis Chalmers D-17 series I with frontend loader, PS, high/low transmission, 3 point box scraper, gas engine, everything there, tin in good shape, runs with choke half on. Needs fuel lines and strainer cleaned, exhaust manifold broke where muffler attaches, tires decent, loader runs off its own front mounted PTO pump, good solid tractor has been sitting for few years, $3200 obo; Rob nnn-nnn-nnnn (Sprague WA)
Allis Chalmers G, 1948. Runs good, electric start, rare extra low first gear, sickle mower, older restoration, $4500; Ron Ebert nnn-nnn-nnnn (Penryn CA)
Allis Chalmers HD7, sn 17803F. Complete. Good sheet metal, live hydraulic pump. Needs steering clutch work. Hauling available, $1500; Boyd Jeffries nnn-nnn-nnnn (Colfax WA)
Allis Chalmers M crawler with blade, runs great, one track tensioner needs repair, $1000; Tim Crockett nnn-nnn-nnnn (Centralia WA)
Allis Chalmers RC, 1939, rare, restored, tires-fair to good, starts and runs strong; Stuart nnn-nnn-nnnn (no texting) (Chico CA)
Allis Chalmers WD, 1948, wide front end. Runs good, $1700; Bernice Brassfield nnn-nnn-nnnn or xxxx@xxxx.xxx (Tulare CA)
Case 18-32 crossmotor. 1925. Nice complete, straight tractor w/. fender extension on the furrow side. Engine is seized and like most of them, it needs an exhaust manifold. This would be a great tractor to restore, or leave it in its work clothes. This tractor does not look to have been abused during its working life and should be easy to get running again, $3900. Open to offers and/or interesting trades. Email, text or call Jon @ nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
Case 25-45 crossmotor, 1929. These are beautiful old work horses with lots of grunt. Engine starts easily and runs well. It is an older restoration and is ready to show as is or tidy it up with a cosmetic restoration. Currently on rubber bolted to the steel, but I have the original bands and grousers. Dont miss your chance to get into one of these big cross motors as they dont come up for sale all that often, $19500. Open to offers and/or interesting trades. Email, text or call; Jon @ nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
Case C parting out; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S or R F&H hc245 Rear round spoke wheels 9x24 very nice and rare, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CO, 1929, orchard tractor on cut off wheels. Engine stuck, $500; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case DC-4 with heart shaped front end, hand clutch, live pto, hyd and eagle hitch. Runs, need some tinkering, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case S front axle assembly: axle, wheels, drag link, wishbone, $125; Buck nnn-nnn-nnnn (Greenville IL)
Case S, 1943. Engine free, not running, good sheet metal, $500; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case SC tractor, recent barn find, always stored under cover. Very complete, missing only air cleaner body, engine runs and tractor drives in all gears, $800. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)
Case VAH, 1948, high crop in good restorable condition. Sheet metal very straight, engine turns over, tires fair. Only 2016 built, $1400 obo or trade. What do you have?; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case VC, $ 250; Ray Fisher nnn-nnn-nnnn or xxxx@xxxx.xxx (Tucson AZ)
Caterpillar 10 parts, 20 radiator and some parts, few 30 parts; Buck nnn-nnn-nnnn (Greenville IL)
Caterpillar D-2 5J series wide gauge, runs good, has a hydraulic bulldozer blade on it, brand unknown. Undercarriage fair, $2500; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar D2 5J with 6 foot blade, ran a couple years ago, pony motor carb needs rebuilt, track chain thin but pins and bushings good, has PTO, selling as is. Can load, $2400. Also have narrow gauge D2 3J with no blade, something locked up in rear end or tranny and won't roll, engines turn over, has not run in four years, as is, $1000. Can load; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Caterpillar D4 6U-626 not running, angle blade, complete cat. Needs work. Come look; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar D6, sn 4R90SP. Has later 318 (90) engine, machine runs and drives good, excellent undercarriage. Mounted double drum control unit. Extra parts included, hauling available, $2000; Boyd Jeffries nnn-nnn-nnnn (Colfax WA)
Caterpillar D-7 3-T series, 1948. Runs great. Has an electric start pony that runs well. Tractor has hydraulic assist steering and forward/reverse lever. Undercarriage is good, grousers are a little low. Has a small oil leak on one final drive and radiator needs a few small leaks fixed. Tractor is bare with no attachments or accessories, $4000; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar NOS Ensign needle valves, $180 each; Buck nnn-nnn-nnnn (Greenville IL)
Caterpillar parts: Rebuild head for D8800 D7 engine. Fits T and M series dozers, $200. 1F9672 is what I see as a casting number. D2 head with valves. Taken off a non-running tractor that was full of antifreeze. 4F1599 is the casting number on this head. Also have D2 /D4 pony carburetors, D7 / D8 pony carbs, four Bosch Magnetos, one Eisemann Magneto. Trying to clear out some clutter so make an offer!; Chris nnn-nnn-nnnn (Stanwood WA)
Clamp-on duals: two 12x24. One with no tire, one with 14 x 24 tire (40% good). Set $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Cletrac DDH, sn IL7242, very good undercarriage, sheet metal and radiator. Original headlamps and engine side panels. Been shedded. Engine disassembled but have all parts. Nice one to restore. Hauling available, $1800; Boyd Jeffries nnn-nnn-nnnn (Colfax WA)
Cletrac HG with Anderson Blade, circa 1948. Runs, $2200 obo; Richard Olson nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Drawbar for Ferguson 20 or 30, attaches to the lift arms, $20; Hubert Bierly nnn-nnn-nnnn (Bend OR)
Farmall 200, runs good. Aftermarket three point hitch, 12v electrical system with alternator, extra remote hydraulic valve, PTO. Will need one rear tire soon, everything else in good condition, $1000 obo; call or text Joe nnn-nnn-nnnn or email xxxx@xxxx.xxx (Escalon CA)
Farmall 230, sn 1513 J, working two-point hitch, runs good, new clutch, and fresh paint. Tires are in fair condition, 12v system with new alternator. Front cultivator mounts available, $1200 obo; call or text nnn-nnn-nnnn or email xxxx@xxxx.xxx. Located Escalon CA
Farmall A, no engine, make offer; Rocky nnn-nnn-nnnn (Cave Junction OR)
Farmall BN and F12, Farmall 656 parts. Call or email for more info and prices; Randy Cooper nnn-nnn-nnnn or xxxx@xxxx.xxx (Republic WA)
Farmall crank, H or M, has spinner handle, $15 plus shipping; Al nnn-nnn-nnnn (Elko NV)
Farmall Cub Lo-Boy, runs great, in very good mechanical condition, sheet metal very good, ready for you to paint it!, $2500. Email for photos, Youtube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)
Farmall Cub, excellent motor, new rear tires and tubes, excellent sheet metal, WRONG COLOR!! Has lights, comes with an original Henderson manufacturing company hydraulic loader with manure bucket in like-new condition. This is a very nice unrestored cub, reduced to $1950; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall M, runs, fair shape with trip loader, no bucket, $900 or $500 with no rear tires and rims; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall M, tall tractor, gas, has gear type drop boxes and 20 single front. Aftermarket wide front will also be available. Engine now running, stored inside, good sheet metal and usable tires. Make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Farmall MD tractor, runs well, good rubber, has live hydraulics, belt pulley and Behlen power steering. Sheet metal is good. Located in Redcrest, CA. $2750; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Farmall regular parts,T20 crawler parts, F series etc. O12 carcass, T20 block, head crank, head etc. Fair prices; Larry nnn-nnn-nnnn (Phelan CA)
Farmall sheet metal from A to 450 plus misc. parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall spark arrester for M, 560 or others. Fits under muffler with mounted corn picker from the '50s; Al nnn-nnn-nnnn (Elko NV)
Farmall Super A Industrial tractor been sitting for years and motor is stuck, very good sheet metal, nice original tag, FAA I 263612. Would make nice restoration. Can ship or possibly deliver within reason. Make reasonable offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Farmall Super C. Good original condition with strong engine and good sheet metal. Includes both single narrow and wide front axle. Tractor has aftermarket cultivator frames front and rear, $2000; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Farmall Super M motor stuck missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super M, needs work, make offer; Rocky nnn-nnn-nnnn (Cave Junction OR)
Ford 800 tractor, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 841 Powermaster, 1959. Engine stuck, sheet metal very good. Trans 12 spd foward, 3 spd reverse. Hydraulics, 3pt, power steering, PTO, wheel weights, $850; Keith Smith nnn-nnn-nnnn (Rio Oso CA)
Ford 8N items: 8N motor, 1947, sn 8N23451. Runs, good OP, head and flywheel machined. Has new water pump and manifold. Starter and generator checked out. Carb & distributor rebuilt. Needs rear main seal, $450. Will sell bare motor for $150. 8N Ford wheel with good Alliance 11.2x28 tire, $250. Heavy duty run stand setup for 8N motors, also has Chevrolet adapter, includes radiator, $300. Have many new and used 8N parts including a belt pulley. What do you need?; Rick Murray nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Ford 8N or 9N pan seat and mounting spring, good condition, $50; Dave nnn-nnn-nnnn (Aurora OR)
Ford 8N or 9N. Complete tractor disassembled. Make offer.; Richard Olson nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Ford 8N restored, original rubber, newer paint, lights, front bumper, sn177, reduced to $2500; Don Chappell nnn-nnn-nnnn (St Helens OR)
Ford 8N, $1900. Ford 2N, $1200; Rocky nnn-nnn-nnnn (Cave Junction OR)
Fordson Trackster front sprocket, in good condition, $50; Dave nnn-nnn-nnnn (Aurora OR)
FREE! Two 13.6 X 26 tires with fair rubber; Dave Gallant nnn-nnn-nnnn (Boring OR)
FREE! Two 16.9 X 28 JD Model D tires and wheels; Dave Gallant nnn-nnn-nnnn (Boring OR)
Hood: for John Deere D, 1941, may fit others, $50; Hubert Bierly nnn-nnn-nnnn (Bend OR)
Inner tubes: Four new and unused inner tubes that fit 11.2 to 12.4 by 28 tires. This is a popular size for some Ford N tractors, $30 plus shipping each; Bob Jaeger nnn-nnn-nnnn (Renton WA)
International 1468 tractor, excellent, automotive paint clear coat, $32000; Glen Kreider call or text nnn-nnn-nnnn (Greenville IL)
International 350 Hi-Utility fast hitch 1 remote runs needs ta work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 350, sn 3903 with John Deere 35 loader, John Deere 227-001 6 ft mower, Ford 3-point blade, good T/A, runs good; $3750; Russ Shorten nnn-nnn-nnnn (Dayton WA)
International 460 utility tractor with 282 cu/in diesel engine, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International B275 - B414 (British) parts, cylinder head, hydraulic parts, steering parts, axle housings, transmission and rearend gears; John Lang nnn-nnn-nnnn (Monmouth OR)
International Industrial A, has run, correct front axle & pto, $800; Morrie Robinson nnn-nnn-nnnn (Sedro Woolley WA)
International TD40, sn TCC4402. Engine free, all frictions workable, undercarriage fair to good. Shedded, ex-farm machine, hauling available, $1500; Boyd Jeffries nnn-nnn-nnnn (Colfax WA)
International TD6 crawler with straight blade, runs. Needs some work or for parts, $1800; Steve Libra nnn-nnn-nnnn (Lebanon OR)
John Deere 1010 diesel dozer. Shuttle trans, good tracks, rebuilt starter, gen new wiring. Street pads, AG pads, swing drawbar, $3500 obo; Ken Boyd nnn-nnn-nnnn or cell, nnn-nnn-nnnn (Livermore CA)
John Deere 1010 dozer with winch, diesel runs, John Deere 1010 dozer with winch, gas engine for parts ; Randy Cooper nnn-nnn-nnnn or xxxx@xxxx.xxx (Republic WA)
John Deere 2010, 1961 utility, sn 2010 RU 15772. Parts or restore; Phil Wall nnn-nnn-nnnn or cell nnn-nnn-nnnn (Buckley WA)
John Deere 26" waffle wheels in great condition, no rust, good mounting holes, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 30" cast centers for rack and pinion axles, fits 50 to 730 and newer, part # F1590R, $50 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 40 high crop, looks like a new tractor, totally restored, runs good, good tires, $5000; Vern Fought nnn-nnn-nnnn (texting is best) (Exeter CA)
John Deere 40 with Bush Hog and Pittsburg 5' disc with scraper blades, $3700; Ray Orlaske nnn-nnn-nnnn (North Plains OR)
John Deere 40-H with 34" wheels and single front parts only; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)
John Deere 420 1957 Ag crawler (no blade) 3 point, excellent sprockets, ins & bushings, pads like new, engine turns over, $2600; Morrie Robinson nnn-nnn-nnnn (Sedro Woolley WA)
John Deere 420C, 5 roller parts blade, idlers, some running gear; Hans Strauss nnn-nnn-nnnn (Stevenson WA)
John Deere 440I wheel tractor, just parted out and on the shelf, most parts available, many are the same as 420 and 430 models. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)
John Deere 4430, 1975, sn 045460 R, duals, FWA 4-wheel drive, power shift, duals, cab, Model 158 loader, $17500; Russ Shorten nnn-nnn-nnnn (Dayton WA)
John Deere 4-each 420 short blocks, rebuilt heads M-3995-T; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)
John Deere 50, lots of parts, square wide front, power steering, fair sheet metal, 12.4-38s 80% L/S bar; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 530, wide front end, runs and looks good, $2340 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 60 parted out, lots left: crank, head, grill, hood, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 60, narrow front tires with roll-o-matic. Also has 42" rear tires, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 620 LP Black Dash, runs on 42" rubber with 16" single front with 3pt, no toplink Airstack new battery box, cables and seat cushions, or John Deere 720 Gas Black Dash turns over on 42"rubber with 16"single front with 3pt no toplink Dual Hydraulics Airstack, $2750 each or $5000 both; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 70 diesel standard, adjustable front end, runs and drives, good sheet metal, air stack, power steering. Tires 50%, pony has a bad rod, $2750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A parts: right axle and crank shaft; Phil Wall nnn-nnn-nnnn or cell nnn-nnn-nnnn (Buckley WA)
John Deere A, 1938. 36" Cast rear wheels. New tires, older restoration. Running tractor, $2500; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere A, 1948, rebuilt with oversized aluminum pistons. Strong runner, $2000; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere A-B rear rim, 38" x 9". Excellent used condition, $100; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere AOS reproduction hood, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)
John Deere AR tractors: Two 1935 early production 250988 & 251742, one on steel, 1 F&H rears, original tires 70-75%, $2500 for both; Morrie Robinson nnn-nnn-nnnn (Sedro Woolley WA)
John Deere AR, $1800; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere AR, 1936. Running tractor. Round spokes on the front. Mismatched rear wheels and tires. Older restoration, $1500; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere AR, 1946. Electric start w/. lighting package. This is a really nice straight original tractor. Engine is loose and will be easy to get running again. Excellent for restoration or get it running and leave it in its work clothes, $1850. Open to offers and/or interesting trades. Email, text or call; Jon @ nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
John Deere AR, 1949, styled, nice shape, cane and rice tires, $2500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere AW, 1948. Running tractor, nice paint, fair tires, $2000; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere B, 1938 long frame, rebuilt engine spokes on rear, runs good, $2750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939. Motor stuck, good tires, good project tractor, $850; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere B, 1942. Ran when parked in the barn a few years ago. Loose splines on the clutch driver. Sheet metal is rough, have extra hood and crankshaft. New rear tires, $1500; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere B, 1942. Tractor runs, nice original rear tires, new front tires, $900; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere B, 1948, sn B233078, narrow front, runs good, $1250; Russ Shorten nnn-nnn-nnnn (Dayton WA)
John Deere B, 1951, Rollamatic, sn 292199 (?), needs restoring; Phil Wall nnn-nnn-nnnn or cell nnn-nnn-nnnn (Buckley WA)
John Deere B, 1951, sn 3#B 281 313. Wide front, runs good, $1750; Russ Shorten nnn-nnn-nnnn (Dayton WA)
John Deere B, 1951. Good tires, fair paint. I have used the tractor to rake hay for several years, $1800; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere BW, 1946, very original condition. Starts and runs, $1700; Perry nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)
John Deere cast iron front end support closed bottom for styled model B, years 1943 to 1945 used during the war years. Good condition, $125. Also have other angle iron front supports and a press steel frame front support, $75. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere cast iron front end support closed bottom for styled model B years 1943 to 1945. Used during the war years, good condition, $125. Also have other angle iron front supports and a press steel frame front support, $75. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere cast wheel centers for model D styled and unstyled. Casting #D2570R. For 28" rubber. Good condition good splines. I don't see any cracks, $250/pair. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere cast wheel centers for model D styled and unstyled. Casting #D2570R. For 28" rubber. Good condition good splines. I don't see any cracks, $250/pair. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere cast wheel centers for styled models A and B. Set #1: Casting number A3402R for 42" rubber fits AN/AW or BN/BW bolt in hub style good condition. I don't see any cracks. 15 spline hubs included, $450/pair. Set #2: casting numbers A3419R for 38" rubber. These centers are correct for the real late styled A and B tractors. They have the 4 slot holes for wheel weights and the 4 round holes as well. Some of the earlier centers only had the 4 slot holes. Bolt in hub style. Good condition. I don't see any cracks, $250/pair. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere D, 1930, originally exported to Argentina. Older restoration, $5800; Perry nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)
John Deere D, 1935, engine free, sheet metal good, tires fair, $1800; Keith Smith nnn-nnn-nnnn (Rio Oso CA)
John Deere D, 1944 steel wheel, restored. Excellent tin, starts easy, fresh paint, $4400; Bill Fox nnn-nnn-nnnn (Spanaway WA)
John Deere D, 1945, stuck but complete to go to good home, reduced to $1250 obo. Come look, make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere H, hand start. Starts easy and runs good, with 4-row cultivator. Has new pistons and new valves, $3500; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere hydraulic pump that goes behind the magneto on two-cylinder tractors, $75; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
John Deere L, unstyled, 1938. Real good tin, good condition. Brass tag, belt pulley and new tires, $7500; Bill Fox nnn-nnn-nnnn (Spanaway WA)
John Deere LA, 1941 (?), nice condition, $2000; Hans Strauss nnn-nnn-nnnn (Stevenson WA)
John Deere Lindeman BO crawler, 1943, overhauled engine, $6000; Mervyn nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d Alene ID)
John Deere M factory drawbar, $90. Final drives each side, $140 each. Torque tube, $40. Cast iron moon wheel covers, pair, $75. Touch control hydraulic assembly, $90. 15 inch cast iron front rims, $75 for pair. 24 inch WAFFLE rims with tires mounted, $575; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
John Deere M, 1951. Good rear tires. Very good original condition, complete, starts easily, and runs and drives well. Very good sheet metal, unmodified front end, working hydraulics, $2900. Email for photos, Youtube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)