Atlas 4 hp tank-cooled engine, built before 1912, Indianapolis, (not a Kruger Atlas from Texas), $21000; Les Layton nnn-nnn-nnnn or xxxx@xxxx.xxx (Keizer OR)
Case stationary power unit complete with clutch assembly and radiator, been inside, best offer; Matt nnn-nnn-nnnn (Denair CA)
Caterpillar D-353, spacer plate engine, currently set up as a power unit, complete radiator through power take off. Will also fit D-9G and D-9H tractors and marine applications. Excellent running engine, $11000; Mike nnn-nnn-nnnn or xxxx@xxxx.xxx for photos or video (Prineville OR)
Economy 1-1/2 hp JK, not running, good Wico mag, some extra parts, $300; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fairbanks Morse 15 hp Z, brass tag, 44" flywheels, lots of original paint, not stuck, complete with pulley and crank guard. Needs very little TLC; Jim nnn-nnn-nnnn after 6 (corrected phone number) (Lumby BC)
Fairbanks Morse 3 hp Z, sn 23437, made in Canada. Not running. In storage since 1995, $350; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Fairbanks Morse 5 hp Z B, complete running engine. No CBWs that I know of, lots of original paint. Pictures on request, $600; Mark nnn-nnn-nnnn (call or text) or xxxx@xxxx.xxx (Hermiston OR)
Fairmont engine used on railroad from years gone by, probably 1930s/40s era, self-contained with radiator etc. Has spoked flywheels, weighs about 200 lbs, turns over but never had running, $250; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Fairmont, free, needs TLC, $400; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Ford flat head engine. Engine is complete with mag and carburetor. No starter or generator. Comes with oil bath air cleaner, $500; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Fuller & Johnson 3 hp K, no known CBW. Great compression. Splitdorf mag, crowned flywheels. No preheated or water injection and not sure it ever had them. Repo name tag. I have owned this engine around 9 years and in that time, I managed to find a fender, gear guard and muffler that has two chips around the edge; Phil Wilkinson nnn-nnn-nnnn (Rio Linda CA)
International LA 1-1/2 - 2-1/2 hp, all original running engine w/ flat and V belt pulley. No CBWs that I know of, $400. Pictures on request. Mark nnn-nnn-nnnn (call or text) or xxxx@xxxx.xxx (Hermiston OR)
John Deere LUC 12 hp power unit, 2 cylinder, from a John Deere 12A pull-type combine. Very good metal, pulley and clutch. Needs exhaust pipe replaced, $400; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Le Roi 2-cylinder 8 hp upright on steel-wheeled cart, model MH3. Good condition, not running, not stuck. Used to run a buzz saw. In storage since 1995, $300; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Marine engines: Mohawk marine engine, very rare, magneto ignition, $400. Missouri marine engine, $150. Crescent marine engine made in St Louis MO in 1911, $300; Buck nnn-nnn-nnnn (Greenville IL)
McCormick Deering 2 hp, 1928 engine. Turns over, has been converted to points and battery ignition. No magneto. I have never had it running, $250; Chris nnn-nnn-nnnn (Stanwood WA)
Mogul 6 hp with original skids and fuel tank, $7000; James nnn-nnn-nnnn after 6PM (Lumby BC Canada)
Mogul 6 hp with original skids and fuel tank, $7000; James nnn-nnn-nnnn after 6PM (Lumby BC Canada)
Novo 2 or 2-1/2 hp (no tag), runs with external gas tank, adapted carb, car points, oil, battery, $450; Richard Hanna nnn-nnn-nnnn (Hayden ID)
Stover CT3, runs good, $600; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
Thermoil 8 hp. Rebuilt and shown in the '80s and stored inside since, $6500. Email is best; J. McMullen nnn-nnn-nnnn or xxxx@xxxx.xxx (Terrebonne OR)
Waterloo Boy engine, disassembled, has block, head, crank, piston and misc parts. Not complete, good for parts or rebuild, $150 obo; Brad Petersen nnn-nnn-nnnn (Cloverdale CA)
Wisconsin engine, small $85; Don Chappell nnn-nnn-nnnn (St Helens OR)
Witte 4 hp headless, 1915, with brass tag, on skids. Not running. Stored inside, $600; Richard Hanna nnn-nnn-nnnn (Hayden ID)