1908 Kelly, chain drive, model K-13. Small truck, radiator behind engine; nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)
1917 International 1-1/2-ton truck, radiator behind engine; nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)
1918 Garford 1-1/2-ton truck, engine rebuilt; nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)
1918 Republic 1-1/2-ton truck; nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)
1921-27 International Special Delivery parts, front fenders, running boards, cowling. Includes six-speed parts- XA engine with flywheel, clutch housing, front fender, two cowling fuel tanks, several front fender to cowling sheet metal parts. Many other parts. All for $300; Russ Shorten nnn-nnn-nnnn (Dayton WA)
1927-1928 Chevrolet parts. Cleaning out extras from 45-year restoration of my 1-ton truck. Have parts books to ID. Some parts fit earlier or later models, and some fit cars; Mark nnn-nnn-nnnn or xxxx@xxxx.xxx (Hillsboro OR)
1928 International 6-speed Special 1-ton truck. Completely refurbished with original 60-bushel IHC grain bed. Runs very good. Shown at Idaho, Washington and Oregon shows including ATHS National Show in Oregon, $9750; Russ Shorten nnn-nnn-nnnn (Dayton WA)
1937 Kenworth, runs, very good condition, one of five of this model built. Been stored inside for 57 years; nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)
1940 Plymouth 4 door sedan, ran when parked, new brakes, many new parts, nice old sedan that needs some work, $3000. Email for pictures; George Northcutt nnn-nnn-nnnn or xxxx@xxxx.xxx (Klickitat WA)
1941 Desoto parts cars, have two, complete with motors and transmissions. Make offer, call for details; Owen nnn-nnn-nnnn (Nampa ID)
1941 Dodge 1-1/2-ton dump truck. Short wheelbase, excellent tin. King pins and bushings replaced, clear title, ran when parked 10 years ago, $1500 or trades for motorcycles, scooters, sidecars, Oliver HGs; Ken nnn-nnn-nnnn (Goldendale WA)
1942 3/4-ton Army, WC weapons carrier with winch. Engine stuck, parts truck or? No title, $500; George Northcutt nnn-nnn-nnnn or xxxx@xxxx.xxx (Klickitat WA)
1944-1951 Ford body parts, $65; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
1946 GMC Dump truck, good hoist, with two motors. Lots of parts. With title, $500; Owen nnn-nnn-nnnn (Nampa ID)
1948-1955 Ford Truck Chassis Parts Catalog, Series 1-6, $60; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
1949 Plymouth, four-door, body good, dependable. Can be driven across country safely, $5000 obo; Owen nnn-nnn-nnnn (Nampa ID)
1950 Chevrolet 5-window dump truck, think 5 yard, ran when parked. Has a '62 Chev V8, 283, 12 volt, 5&2, newer tires, $2500; George Northcutt nnn-nnn-nnnn or xxxx@xxxx.xxx (Klickitat WA)
1953-56 Ford pickup parts: fenders, some rust, $120 each. Hood, excellent condition, $500. 2 Ford 9” rear-ends, misc. sheet metal in good condition, spare tire cover (chrome with painted center), fender mounts & bracket, two ’53-56 radiators, look good; Phil Wall nnn-nnn-nnnn or nnn-nnn-nnnn (Buckley WA)
1955 Ford F800 Fire truck, 18,000 original miles, ex City of Cheney WA, V-8 292, 5 spd single speed rearend, Roney Fire body, cab in very good condition with minor dent in hood right side and small dent in right cab roof, no rust. Fire body good condition with surface rust. Cab interior in great condition, all lights and gauges work, original Ford script keys and light covers. Would be a nice restoration project or a great flatbed to haul your classic tractor or Rat rod, $4500 obo; Rob nnn-nnn-nnnn (Sprague WA)
1955 Ford Victoria 2-door hard top; nnn-nnn-nnnn or nnn-nnn-nnnn (Ellensburg WA)
1956 Chevrolet parts: engine, doors for four-door hardtop, transmission, wheels, miscellaneous, $850; Ed Bring nnn-nnn-nnnn (Molalla OR)
1956 Dodge truck, Model T, three-ton, 331 cubic inch engine with single carb, 10.00x 20 Budd wheels, 156” wheel base $650. Fifth wheel and 1990 Navistar 190 HP with AT 545 trans available as a total unit for $1850. Will separate as desired; Russ Shorten nnn-nnn-nnnn (Dayton WA)
1961 Ford Passenger Car Parts & Accessories Catalog, $40; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
1961 White truck radiator needed; Jack Fusari nnn-nnn-nnnn (Madera CA)
1962 Corvair Model 927, 80 hp, 4-speed, New tires, top of line Clarks Corvair interior, Roman red paint, $2950; Russ Shorten nnn-nnn-nnnn (Dayton WA)
1963 Ford Factory Shop Manual. Quick Reference Catalog, $45; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
1963 Ford Falcon Ranchero. 6-cylinder 170 engine. Ready for restoration. Original color was red but has been repainted blue. Runs well, $1975. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
1963? Ford 1.5-ton cab and chassis. 292? V8. 4speed with 2 speed diff. Has not run in years, $500; Steve Libra nnn-nnn-nnnn (Lebanon OR)
1966 GMC 3/4-ton pickup, new electronic ignition. All original, V-6 auto, power steering, reduced to $2000; Don Chappell nnn-nnn-nnnn (St Helens OR)
1976 Ford Truck Shop Manual, Volume 2, $40; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
1978 Ford F250 flatbed truck. Flatbed Diamond plate, two attached tool boxes, two tanks, duel wheels, very good condition; Dan Casale nnn-nnn-nnnn (Denair CA)
1981 Mercedes Benz 240D, needs work, good engine, good title, $300; Earl L Wacker nnn-nnn-nnnn (Penngrove CA)
1985 AMC Eagle 4x4 plus titled parts car. Rebuilt 258 cu, 6-cylinder (approx. 3000 m), runs, drives, stops good. Great in snow and ice. Needs some TLC but is good for work or first car. Have over $2000 in motor. Sell for $1500 or trades for motorcycles, scooters, three-wheels or Oliver HGs; Ken nnn-nnn-nnnn (Goldendale WA)
1986 Mercedes Benz 420SEL, runs well, $700. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
2004 Gulf Stream Sun Voyager 36 ft motor home, many options, all in working order, clean title; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Auxiliary saddle fuel tank for big truck. 28 x 20 x 14-1/2 inches. Heavy-duty, photos available, $50; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)
Chevrolet small cargo van, runs but overheats, V-8 auto, $450 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Corvairs: One 1961 Rampside, clean title, running, 4-speed. One 1962 Rampside, running, no title, 4-speed. One Monza 2-door hardtop 4 speed. One 1965 Corvair Corsa convertible, no engine. One Corvair Corvan, nice, no rust, many parts for Corvairs; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Fiberglass pickup canopy, fits 2000 on Chevy extra-cab trucks. Excellent condition, red; Al nnn-nnn-nnnn (Elko NV)
Ford Model T parts for sale including two turtle backs, one for $100 and one for $335, plus other misc. parts; Dave nnn-nnn-nnnn (Boring OR)
Hub cap for 1974 Gremlin car (American Motors), $100; Joe Keith nnn-nnn-nnnn (Hermiston OR)
New Super Scout Specialties fiberglass quarter panels for IH Scout II. Includes fillers, $350. Can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Six-cylinder Flathead engine with 3-speed tranny out of a 1948 International panel truck, motor is stuck, $150 obo for all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Tires: Kelly tires, have 4, mounted on 16" x 8 lug Chevrolet alloy wheels, $100; Ed Bring nnn-nnn-nnnn (Molalla OR)
Tires: Les Schwab tires, have four, mounted on 16" x six lug Chevy alloy wheels. 80%, $240; Ed Bring nnn-nnn-nnnn (Molalla OR)
Tires: Subaru tires and rims, have three (off Subaru outback) $50; Ed Bring nnn-nnn-nnnn (Molalla OR)
Transmission: Ford truck 4-speed T98-148 on it, from the 1950s, $30; Jerry VanDeWalle nnn-nnn-nnnn (Yamhill OR)
Trucks: one 1954 GMC running. One 1952 GMC not running. One 1973 International 20 ft van. One 1979 Ford F700, 18ft box. One 1966 Ford F703 full air brakes. One 1946 Chevrolet truck, nice rig; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Volkswagen Bugs, need work: One VW powered street-legal 4-seat buggy, clean title. VW bus rear axle reduction boxes. Solid front end, solid rear end, IRS rear axle; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Wanted: 1951 Ford auto bumper brackets for front end; Hank nnn-nnn-nnnn (Carlton OR)
Wanted: 1951 Ford Victoria sedan, whole or parts car; Hank Weigel nnn-nnn-nnnn (Carlton OR)
Wanted: good rear end for ‘59 Chevy Apache one-ton, has 15-inch backing plates, single rear wheel, also looking for step side bed parts, crosspieces that supports the wood and any other parts; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)