Agritrac Crawler tractor, the largest model I've ever seen, made in Berkeley California I believe in the 50s, has two-cylinder gas engine, comes with nice backhoe (looks to be original) and hydraulic blade. Been sitting in a barn for many years, never had running, motor turns over, weighs about a ton and a half. Has original tag, motor turns over, $6500 or reasonable offer, can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Allis Chalmers WC, have two tractors for parts or to rebuild. Both tractors are fairly complete. Pictures available upon request. Save from the scrap yard. $400 obo for the pair; Kyle Van Vooren nnn-nnn-nnnn (Modesto CA)
Case 1030 with 3 pt. hitch and two sets of rear tires, good condition. Bought tractor 15 years ago. The tractor was split it in two to install clutch; purchased new clutch and internal parts to put back together. Two good Wheatland fenders. Tin wear is good, has front weights. Radiator, generator, starter, heads rebuilt, a lot of new engine parts and rear end/ transmission parts. The tractor is still unassembled. Purchase a second 1030 for parts. All included for $8500 or best offer; James R. Hayes Jr nnn-nnn-nnnn or xxxx@xxxx.xxx (Issaquah WA)
Case C parting out; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S or R F&H hc245 rear round spoke wheels, 9x24, very nice and rare, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DC-4 with heart-shaped front end, hand clutch, live pto, hyd and eagle hitch. Runs, need some tinkering, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case LA, propane, straight, but stuck, $1100; Fred nnn-nnn-nnnn cell (South Prairie WA)
Case S tractor, 1948. Good tin work, good tires. Engine is free but hasn’t ran for a year or two. Has rear weights, drawbar and rear PTO. Delivery available, $750; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case SC tractor, recent barn find, always stored under cover. Very complete, missing only air cleaner body, engine runs, and tractor drives in all gears, $750. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx (prefer email) (Woodland CA)
Case VAC tractor parts, 1949 model. Hood, grill, narrow front axle, steering column, rear weights, several other misc parts; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case VAC, 1946. Refurbished, two-way plow but missing left moldboard and beam. Good tires, narrow front, $1000; Russ Shorten nnn-nnn-nnnn (Dayton WA)
Case VAI, straight sheet metal, hasn't run for years, rebuilt cylinder head, $500 obo; Fred Buldhaupt nnn-nnn-nnnn (South Prairie WA)
Caterpillar D2 5J, been sitting for a couple years. Both motors turn over, previous owner said ran fine when parked, has PTO, 6-foot hydraulic blades, never had running as is, $2400. Can load; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Caterpillar RD4 with hydraulic front blade and rear BG hydraulic pump with 3-4 cubic yard rubber-tired pull scraper. Overhauled engine and have books for Cat, $3500; Bill nnn-nnn-nnnn (Bayside CA)
Cletrac AD with angle blade, runs and steers good, clutch rebuilt, $2500; Don Weburg nnn-nnn-nnnn (Arcata CA)
Cletrac E62, all support rolls, rebuilt engine and clutch, new band on one steering brake, front suspension rebuilt, carburetor and mag rebuilt. Runs good and steers good, $3000; Don Weburg nnn-nnn-nnnn (Arcata CA)
Crawlers: Allis Chalmers 35 crawler, $2100. International T40 crawler, $1750. These tractors were restored by Pat Alegria. Ronnie 559-859- 0289 (Dinuba CA)
Cylinder head for International 6-cylinder 236 cubic inch diesel engine from 460 Farmall, $180 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Deutz model D914L05 engine, 97 hp, 72.5 kw, 2300 rpm, 5.393 liter, $1500; Vern Fought nnn-nnn-nnnn (Exeter CA)
Duals: two Clamp-on duals,12”x24”. One with no tire, one with 14” x 24” tire (40% good). Set $200 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Farmall A, 1939, FAA795, good rubber, original condition, $1900; nnn-nnn-nnnn (Placerville CA)
Farmall AV, 1947. This tractor runs very good. Has electric start, working headlights, new battery, almost-new front tires. The steering is good, clutch and brakes work fine. It sits on 42” rears, but I have a pair of 36” rears for it if you want. It will be at the Turlock, CA swap meet on March 11/12 if you want to come, test drive it, and take it home, $1850. Call or text Bob Currie nnn-nnn-nnnn (Greenwood CA)
Farmall Cub Lo-Boy parts tractor ag tires, 3 pt. $1250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall Cub Lo-Boy with nice loader. Very nice condition, yellow & white very good turf tires, 3 pt., $3750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall Cub, 1948. Perfect running Cub. Tires are in excellent shape. 6-volt system with a 12-volt battery. Does not have any running lights of any kind. Starts right up and ready to go. Has had complete brake work and carb work. Does not leak gas. Runs very smooth. Draw bar with hitch. Tin work is in real good condition, paint would put it parade ready, $1800; Murray nnn-nnn-nnnn (Lebanon OR)
Farmall F-12, 1936, older restoration, excellent condition, show ready, electric start, tires in decent shape, $2750; Daryl Klein nnn-nnn-nnnn (Deming WA)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall M, dual front wheels, engine stuck, have good engine to go with, $450; Richard Parker nnn-nnn-nnnn (Lind WA)
Farmall M, narrow front, 1950. Super M pistons/sleeves, optional lights, belly pump, tool box, wheel weights, belt pulley. Bought from original owner forty-four years ago, only used on small farm. Excellent tires, $2250; Russ Shorten nnn-nnn-nnnn (Dayton WA)
Farmall M, older restoration, runs well, good to excellent rubber, nice tractor, $2400; Jack Hasser nnn-nnn-nnnn (Phelan CA)
Farmall M, runs, fair shape with trip loader, no bucket, $900 or $500 with no rear tires and rims; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall M, tall tractor, gas, has gear type drop boxes and 20” single front. Aftermarket wide front will also be available. Engine now running, stored inside, good sheet metal, and usable tires. Make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Farmall MD tractor, runs well, good rubber, has live hydraulics, belt pulley and Behlen power steering. Sheet metal is good. $2750; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Farmall sheet metal from A to 450 plus misc. parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super C, 1954, narrow front, sn 197715J. Very good tires, fast hitch, IHC wind breaker, IH umbrella, two plows, one 2-bottom, one 1-bottom. Very nice running tractor, fast hitch drawbar, great paint; Al nnn-nnn-nnnn (Elko NV)
Farmall Super C, 1954, sn 195954J. With Case loader, fast hitch, very good rubber, recent paint, excellent running; Al nnn-nnn-nnnn (Elko NV)
Farmall Super C, 1954, sn 197715J. Narrow front, excellent rubber, fast hitch with two plows, (C-20 and one-bottom). IHC windbreaker, umbrella, excellent running; Al nnn-nnn-nnnn (Elko NV)
Farmall Super C, 1954, wide front, sn195954J with Case loader, very good tires, fast hitch, recent paint, decals. Excellent running; Al nnn-nnn-nnnn (Elko NV)
Farmall Super C, with 8-foot belly mounted grader blade, tool bar, cultivator, 3 pt adapter, rippers, utility box, new tires, chains for rear tires, always garaged, reduced price $3000 obo; Bill Littlefield nnn-nnn-nnnn (Eagle Point OR)
Farmall Super C. Good original condition with strong engine and good sheet metal. Includes both single narrow and wide front axle. Tractor has aftermarket cultivator frames front and rear, $2000; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Farmall Super M motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Ford 800 tractor, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 8N rear wheel weights, $100 pr; nnn-nnn-nnnn (Placerville CA)
Ford 8N, 1947 with many options. Swinging drawbar, front grille guard, extended steering column. .090" over four-ring high dome power pistons, recent main and rod bearings, new clutch, pressure plate, throw-out bearing, proof meter. Also has recent new tires and new sheet-metal, $6000 invested, will take $4500 cash; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 9n, chassis only, no front or rear rims, no tin. Late 1941 engine is loose, with radiator, generator, starter, carburetor, etc. Will help load, $400; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ford 9N aluminum dash, trans cover, side covers, decent tires/rims. Offer; Fred nnn-nnn-nnnn cell (South Prairie WA)
Ford NAA, good tires, straight metal, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Graham Bradley row crop, 1938. New tires, $6000/offer; Jim nnn-nnn-nnnn eves (Yorkville CA)
Harris with 4-wheel drive, Power Horse, $3500 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Hood: fits John Deere D, 1941, may fit others, $50; Hubert Bierly nnn-nnn-nnnn (Bend OR)
IH-185 Unit Planters (4 available), $250 each; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
International 149 Cub Cadet, hydrostatic tractor with a full hydraulic Johnson skip loader plus a rototiller attachment, $1900, or will sell the skip loader separately for $1000; Milton Nichols nnn-nnn-nnnn (Red Bluff CA)
International 261 tractor with factory mounted roadside brush cutter. Diesel tractor starts easy and runs very good. Hydrostatic drive is very strong. Two foot-pedal control, everything works, $5000; Don Weburg nnn-nnn-nnnn (Arcata CA)
International 350 Hi-Utility fast-hitch 1 remote runs needs ta work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 460 Utility with 282 cid diesel engine, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International Harvester O4 tractor, super narrow, may be vineyard model. Fairly complete barn find kept under cover, needs restoration, $650. See at vintagetractors.com. John Boehm nnn-nnn-nnnn or (email preferred) xxxx@xxxx.xxx (Woodland CA)
International TD 9 series "B" direct electric start, torque converter, sweeps, winch, starts good, no power to left side, all or parts-tracks are sold, $1800 obo; Fred nnn-nnn-nnnn cell (South Prairie WA)
International TD-6 Series B injection pump, rebuilt & calibrated, $450 plus freight; Wes Allen nnn-nnn-nnnn or xxxx@xxxx.xxx (Live Oak CA)
International TD-9 dozer, parting out, 282 diesel starts and runs decent, left side final problem, Carco winch, tracks are sold; Fred Buldhaupt nnn-nnn-nnnn (South Prairie WA)
John Deere 1010 and 440I wheel tractors, just parted out and on the shelf, most parts available, many are the same as 420 and 430 models. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or (email preferred) xxxx@xxxx.xxx (Woodland CA)
John Deere 26" waffle wheels in great condition, no rust, good mounting holes, $500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 30” wheel cast centers for standard tractors for rack and pinion axles, fits 50 to 730 and newer, part # F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 4020, rod spun, $2500; Richard Parker nnn-nnn-nnnn (Lind WA)
John Deere 420 Utility, just in for parts. Mostly complete, most parts available. Guaranteed low prices!; Dax nnn-nnn-nnnn or xxxx@xxxx.xxx (Durham CA)
John Deere 420C with aftermarket loader. Runs good but have not run in a couple of years, very clean, $2000; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 50 roll-a-matic front end, sheet metal pretty good, has not been started for a couple of years, $1000; David Lungren nnn-nnn-nnnn (Spokane WA)
John Deere 50, engine turns over. Great restoration project, mostly complete. $1,000; Dax nnn-nnn-nnnn or xxxx@xxxx.xxx (Durham CA)
John Deere 50, just in for parts. Okay sheet metal, engine turns over. Most all parts available. Guaranteed low prices!; Dax nnn-nnn-nnnn or xxxx@xxxx.xxx (Durham CA)
John Deere 50, lots of parts, square wide front, power steering, fair sheet metal, 12.4-38s 80% L/S bar; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 520, just in for parts. Engine turns over. No 3-point. Good sheet metal. Guaranteed low prices!; Dax nnn-nnn-nnnn or xxxx@xxxx.xxx (Durham CA)
John Deere 530, wide front end, runs and looks good, $2340 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 60 parted out, lots left: crank, head, grill, hood, plus misc. parts, call with needs; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 60, narrow front tires with roll-o-matic. Also has 42" rear tires, $1530 or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 620 LP Black Dash, runs on 42" rubber with 16" single front with 3pt, no top link Airstack new battery box, cables and seat cushions, or John Deere 720 Gas Black Dash turns over on 42"rubber with 16"single front with 3pt no top link dual hydraulics airstack, $2750 each or $5000 both; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A Highcrop, 1952, good tag. Runs and drives. Older repaint. Cleaning some out of the barn, $15,000; Dax nnn-nnn-nnnn or xxxx@xxxx.xxx (Durham CA)
John Deere A, 1945, sn 558541, tricycle, styled, restored, rebuilt engine, new gauges, new wiring, electric start, starts and runs good, professionally painted, invested $9000, asking $3000 obo; Bill Littlefield nnn-nnn-nnnn (Eagle Point OR)
John Deere A, 1948. Engine rebuilt with oversized aluminum pistons. Roll-o-Matic front. Runs like a watch. Rebuilt magneto, $1800; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere A, 1952, sn 691302. Decent rear tires, Roll-o-Matic front end, split pedestal. Recent engine work, head was replaced due to freeze damage. Will move and drive, but 2nd gear does not seem to work, $1200; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere anteater A, runs and drives, $1800; Fred nnn-nnn-nnnn cell (South Prairie WA)
John Deere AO, 1947, good tag, metal is thin, $1750; Fred nnn-nnn-nnnn cell (South Prairie WA)
John Deere AR, $1800; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere B, 1937, on steel, $1200; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)
John Deere B, 1938 long frame, rebuilt engine spokes on rear, runs good, $2750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere B, 1939. Engine stuck. Nice original rear tires, newer fronts. Fairly straight tractor, $900; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere B, 1949, Roll-o-Matic front, nice tractor, in good shape; Dan nnn-nnn-nnnn (Borrego Springs CA)
John Deere B, 1950. New tires. Older restoration. Nice looking a running tractor. Has alternator instead of generator that needs to be rewired, $2000; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere B, 1950. Nice rear tires. Older paint job. I have used it to rake had for several years, $1500; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere BO fender, new aftermarket, $500; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere BO, 1947, with two new front tires, starter rebuilt, runs good, $4500; Jim Sorensen nnn-nnn-nnnn (Mt Vernon WA)
John Deere B's, two of them. 1943ish. Both run. One has new rear tires but has loose splines on the clutch side of the crank. The other runs but needs TLC. Has nice original rear tires and new fronts, $1200 each; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere cast iron front end support closed bottom for styled model B years 1943 to 1945. Used during the war years. Good condition, $100. Also have 3 other angle iron front supports and a press steel frame front support, $50 each. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere cast wheel centers for model D styled and unstyled. Casting #D2570R. For 28" rubber. Good condition, good splines. I don't see any cracks, $200/pair. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere cast wheel centers for styled models A and B. Set #1: Casting number A3402R for 42" rubber fits AN/AW or BN/BW bolt in hub style good condition. I don't see any cracks 15 spline hubs included $400/pair. Set #2: casting numbers A3419R for 38" rubber. These centers are correct for the real late-styled A and B tractors. They have the 4 slot holes for wheel weights and the 4 round holes as well. Some of the earlier centers only had the 4 slot holes. Bolt in hub style. Good condition; I don't see any cracks $200/pair. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere D, 1929, on cut offs, new front tires, older paint, has not been started for a couple of years, $3000; David Lungren nnn-nnn-nnnn (Spokane WA)
John Deere D, 1945, stuck but complete to go to good home, $1250 obo. Come look, make offer; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, 1947, restored, call for price; Dan nnn-nnn-nnnn (Borrego Springs CA)
John Deere G, 1949, four new tires, roll-a-matic, new temp gauge, new muffler, generator rebuilt, runs good, $4500; Jim Sorensen nnn-nnn-nnnn (Mt Vernon WA)
John Deere GP Orchard tractor, 1931. Restored, runs and looks great, sn15027, $10500; Mark nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)
John Deere GP Orchard, 1931, sn 15027. Restored, runs and looks great, $10500; Mark nnn-nnn-nnnn or xxxx@xxxx.xxx (Creswell OR)
John Deere H mushroom front wheel weights, $400 pr; nnn-nnn-nnnn (Placerville CA)
John Deere H, completely gone through, restored, $4000; Dale nnn-nnn-nnnn or xxxx@xxxx.xxx (Shelton WA)
John Deere H, starts easy, new pistons & valves, runs good, with a 4-row cultivator, $3500; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere Lindeman BO crawler, 1943, overhauled engine, $6000; Mervyn nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d’ Alene ID)
John Deere M, 1951, good rear tires. very good original condition, complete, starts easily, and runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2900. Email for photos, Youtube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or (email preferred) xxxx@xxxx.xxx (Woodland CA)
John Deere MT. Running tractor with single front wheel. Very straight nosecone and hood. No fenders. Has a Case 3 point and cultivator on it. $1200.00; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere R parts. Two starting engines, hood, manifold, block bored 45 over, and more. Call for prices; Chris nnn-nnn-nnnn (Stanwood WA)
John Deere R, 1953, nicely restored, new tires, nice paint. Ran it last three years in parades. Strong runner, to use or show, $6000. Will take guns on deal. May deliver for price; Dan nnn-nnn-nnnn or cell nnn-nnn-nnnn (Lander WY)
John Deere stamped pads for MC or Lindeman, have a few, $15 each and up depending on the condition. Have some used clutch disc for Lindeman, also have starters for the two-cylinder crawlers, $100 each and up depending on condition. Several carburetors for two-cylinder crawlers; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere tractor cab fender, left-hand rear side, fits John Deere 6615, 6130, 6125, 6330, 7430, 7530, 7130, 7230, 7230, 7420 and 7520. New. You pick up, $250 cash; Carol nnn-nnn-nnnn (Keno OR)
John Deere tractors, JD M, restored. JD 140 lawn & garden, restored. JD 430, tricycle with new front tires and 80% rear tires, lots of JD LA frames, sheet metal, wheels, plow, spring tooth, etc. Package deal, $12500; James Hyer nnn-nnn-nnnn (Winters CA)
John Deere Tractors: JD M, restored, JD 140 lawn & garden, restored, JD 430 tricycle with new front tires and 80% rear tires, lots of JD LA frames, sheet metal, wheels, plow, spring tooth, etc. Package deal $12,500 for everything; James Hyer nnn-nnn-nnnn (Winters CA)
John Deere two-cylinder radiators. Top tank casting numbers: B758R, unstyled BO and BR with fan shroud top tank rusted through. B2602R, late styled B with shutters. B1802R, styled B s/n 96000-148499 with shutters and shroud, small hole in bottom tank. B3566R 520/530 with fan shroud. F864R, late styled G pressure cooling system non-water pump bottom tank. F3122R, 70/720/730 gas or diesel. All radiators have not been leak checked. $100 each obo. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
John Deere wide front end for 50 - 730 models. May also fit A, B and G. Schwartz is the manufacturer, $250; Chris nnn-nnn-nnnn (Stanwood WA)
Kubota DT185 2x4 parts tractor, $1250 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Kubota DT185 4x4, runs good, good rubber, 3 pt. Fair condition, $2950 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Massey Harris three point three bottom plow, $300. Used 13.6x38 rear tire, good tread, $200; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Massey Pony tractor hood, very good condition $150; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
McCormick Deering I-4, turns over, good shape, $950; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O-4 parting out: orchard belt pulley, shutters, plus misc parts.; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O-4: Runs, missing orchard sheet metal, $1000; McCormick Deering O-4: Very early motor stuck, missing orchard sheet metal, $650; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering rare ODS-6s Orchard diesel engine free and 1 parts tractors, both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering TD-6 motor parts block head; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Minneapolis Moline Model BF, 1951, transitional model, built by Avery Equipment and in their dealer's show room when M/M purchased that company. The tractor was brought to M/M facilities, repainted Prairie Gold, added their hydraulic system added and sold as a Minnie. Narrow front and runs good, $2500; Russ Shorten nnn-nnn-nnnn (Dayton WA)
Minneapolis Moline radiator and front nose. Missing screen but nose is in excellent condition, no dents or dings. Includes old radiator core. Unsure which model it fits but looks like RTU or ZTU. $100. Photos available; Jason Alvernaz nnn-nnn-nnnn (Turlock CA)
Minneapolis Moline rear wheel weights, $50 ea; nnn-nnn-nnnn (Placerville CA)