August 2018 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, runs, good condition, $4000 obo; Ed Bring nnn-nnn-nnnn (Molalla OR)

Allis Chalmers G, 1948, $2000; Tom Randall nnn-nnn-nnnn or xxxx@xxxx.xxx (Fiddletown CA)

Allis Chalmers G, 1952, SN 25584. It has been well cared for and is in good condition. Recently tuned up, has a new battery and rear tire. Comes with a manually operated three pronged underbelly cultivator, $3750; Gregg Novonty nnn-nnn-nnnn (Grass Valley CA)

Allis Chalmers Monarch 35 or K being parted out; Buck Evans nnn-nnn-nnnn (Greenville IL)

Bolens/Iseki 17 hp, 3-cylinder diesel, Kelly backhoe and original loader, tractor in nice shape for being older, engine has water in oil, sat for years, recently had it running, but selling as non-running, good tires, $3900; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Case 450 dozer, rippers, with 6 way blade, almost new undercarriage, very good original paint, new rods, mains and seals, zero hours on rebuild, $12500; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case C, S or R F&H HC245 rear round spoke wheels 9x24, $300. Case C S D parts,áCase DC-4 with heart shaped front end, hand clutch, live pto, hydraulic and eagle hitch, runs, need some tinkering, $700; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

Case SC, tin excellent, new front tires, good rears, needs head work, $750; Ed Bring nnn-nnn-nnnn (Molalla OR)

Case tractor parts. Several engines and parts for VA, S, D, LA, 300s, 400, Racine and others. Lots of used engine parts and fenders for most and sheet metal for most models. Rims and tires too. Whole tractors including C, CO and CCs, VAO with orchard fenders, big 400s and others. Several radiators, engine blocks, you name it for 830s, 930s, western specials (complete tractors). 45 years of collecting, call for needs and more information; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)

Case tractors and parts: VA, VAC with tricycle front end, (2) VAC-14 with Eagle hitch, VAI with adjustable front axle. Lots of parts, sheet metal, gasket sets, radiators, etc. Tractors $100 each, parts and pieces very negotiable. Hate to get rid of them, but they have to go; Al Downs nnn-nnn-nnnn (Tacoma WA)

Caterpillar 10 and 20 parts, also some 30 parts. Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 15 parts, enough for 2 tractors, 2 radiators, 3 fuel tanks, 2 chassis, 1 complete engine, 2 sets fenders, hood, parts, buyer takes all, $950; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar 15, 1930 PV series tractor, not running, cylinder head is loose, engine is not stuck, fair undercarriage, brand new seat cushion. Nice project tractor, asking $750 obo; Tim Morris nnn-nnn-nnnn (Napa CA)

Caterpillar 22 1J WSP, wide pad, runs and drives, needs valve job, $1000; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

Caterpillar 22, 1934, SN 2F 961, engine, radiator, rear end with sprockets, needs overhaul, $600; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar 22, crawler, not running; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)

Caterpillar D2s, SN 1145 and 10820, one runs other for parts, $1200; Sam nnn-nnn-nnnn (Bickleton WA)

Caterpillar D4 2T series, Caterpillar hydraulics, Wallace angle dozer blade, runs $2250; Sam Berk nnn-nnn-nnnn (Bickleton WA)

Caterpillar D4 radiator, fuel tank, $550; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac crawler with very strong running 226 cubic inch 6-cylinder Continental engine. About 50 hours on overhauled engine, compression tests are within factory specifications, rare dual PTO, standard 6 spline, 540 rpm, flat belt pulley off to the side for running antique implements like a buzz saw or a thresher. Drives and steers perfectly. Come see it run. Have too many toys and need to downsize. Buzz saw available separately, $2500; Pete Macfarlane nnn-nnn-nnnn (Kuna ID)

Cletrac W radiator and head; Buck Evans nnn-nnn-nnnn (Greenville IL)

Cockshutt 20, rare single front wheel, not running; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)

Danhauser 7 foot blade, heavy duty, has 3-pt, also 2-pt hitch adapter, $200; Al nnn-nnn-nnnn (Elko NV)

Earthmaster Model C, 1948, N62 Continental engine, good front and rear tires, 80% engine and hydraulics overhauled, new carb and gear oil, very nice show tractor, runs good, stored inside, $2100 obo; M. Beld nnn-nnn-nnnn evenings or xxxx@xxxx.xxx (Lynden WA)

Farmall 460 cylinder head, came from 6 cylinder, 236 cubic inch diesel engine, $180 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Farmall A and Cub swinging drawbar, U-shaped, $185 for both pieces; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

Farmall A, have 2, one to get running, was in shed for 30 years, ran when parked, engine turns, SN AA59005, second A for parts, SN 100806, $750 for both; Art Keyes nnn-nnn-nnnn call 9AM to noon (Toledo WA)

Farmall A, tires ok, engine stuck, needs some parts, $300. Have many other parts as well for A, B, C, H, and M, what do you need?; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall Cubs, 1947 and 1948, one with belly mower, one with blade and plow. Ready to work or restore, $3250 for both. Pictures upon inquiry; Wayne Sealock nnn-nnn-nnnn (Yakima WA)

Farmall F-14, 1938, runs well, on steel wheels, good paint, good condition, $2350; Dennis Leischner nnn-nnn-nnnn (Damascus OR)

Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

Farmall H, 1940, rebuilt starter, new plugs and wires, front homemade bucket; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)

Farmall M, 1942 wide front, engine is stuck, tractor looks complete and is on fair rubber, includes extra set of rear rims, reduced to $600. Open to trades, especially for Ferguson implements. Needs to go. You get a free tour of our other equipment, ice water and help loading, usually all hours; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Farmall M, extremely straight in work clothes, almost new 12.4x38 tires, runs like ôeating out of your handö, factory power steering, steers with one finger, factory wide front end, converted to 12v with alternator, very fine example of American farm tractor, $3750. Willing to accept some trades and offers considered; Don Chappell nnn-nnn-nnnn (St. Helens OR)

Farmall McCormick 460, runs very well, loader, no bucket, new fronts, rears good, new wheels, $1750; Ed Bring nnn-nnn-nnnn (Molalla OR)

Farmall sheet metal from A to 450 plus miscellaneous parts. Super M motor stuck, missing head, great project, $400; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

Farmall Super C, 1954, sn 197715J. Narrow front, excellent rubber, fast hitch with two plows, (C-20 2B and 20ö one-bottom). IHC windbreaker, umbrella, excellent running; Al nnn-nnn-nnnn (Elko NV)

Farmall Super C, 1954, SN195954J. Comes with Case loader, live hydraulics, Fast Hitch, very good rubber, excellent running; Al nnn-nnn-nnnn (Elko NV)

Farmall Tractors: 1940 H, new tires, extended wide front end, running condition. 1968 Cub Low Boy 154, running condition, good turf tires, 3-pt hydraulic lift, custom front metal grille. 1950ĺs Cub Low Boy, not sure of year, needs TLC, tires fair. 1947 Farmall B, 3 wheels, new tires, 2 row cultivator, running condition; Bill nnn-nnn-nnnn (Covelo CA)

Farmhand loader F11, new seals in the cylinder, repaired and repainted, $1500; Sam nnn-nnn-nnnn (Bickleton WA)

Ferguson TO-30, 1953, comes with 1960ĺs Wagner step through loader, runs great, tires really good, 12V conversion with electronic ignition. Selling for a friend, owner relocated to Texas. Comes with 800 lb counterweight and 5 foot scraper blade, $3500; Steve Fromhold nnn-nnn-nnnn (Graham WA)

Ford 2N, 1943, painted sheet metal, very good tires, recent carburetor work, very rare war years manufactured, $2750 obo, pics upon inquiry; Wayne Sealock nnn-nnn-nnnn (Yakima WA)

Ford 740, 1955, fully restored, Howard lo range, power steering, rest-o-ride seat, lights, umbrella, drawbar, new tires, $4600; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Ford 800, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 8N/9N PTO unit with flat belt pulley, $100; Owen Arnett nnn-nnn-nnnn (Nampa ID)

Ford 9N steel rear lugged rear wheels. Make offer; Owen Arnett nnn-nnn-nnnn (Nampa ID)

Ford 9N, new battery, almost new rear tires, use it or show it condition, $3000; WS VanGundy nnn-nnn-nnnn (Cottonwood CA)

Ford Golden Jubilee, 1953, fully restored, immaculate, lights, bumper, drawbar, umbrella, new tires, $5800 obo; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Ford N parts: 1- 75L-15SL 8 ply tire with tube, 80%. 2- OEM 28 inch rear rims, very good. 4- 19 inch front wheels and tires. 2- non-script fenders with brackets, excellent. 1- tool box, fender mount. 1- fuel tank, solid. 2- running boards with mounting hardware, excellent. 1- battery holder for 8N. 2- starters. 1- generator. 1- late 8N steering gear. 1- PTO shaft. 1- trans to clutch shaft. 1- Marvel Schebler TXS-241B carburetor. 1- side mount distributor. Several 6v lights. 1- front axle assembly complete with hubs and radius rods for 8N. 1- steel flat belt pulley. Several misc. electrical parts and gauges. Call for prices. Will make a good deal if you take everything; Lee nnn-nnn-nnnn (Crawfordsville OR)

Ford parts: 8N front wheel weights, 16 inch, $100. 9N front wheel weights, $100, 9N rear wheels, $100 each. Misc. sheet metal; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Harris Power Horse, 4-wheel drive, $3500 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Hercules IXB5 with clutch and starter, $200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Hydraulic cylinder, Lion brand, 2 in bore, 10 in stroke, used once, like new, pics available; Al nnn-nnn-nnnn (Elko NV)

Hydraulic straight tilt blade, possibly Holt, everything there but hydraulic on tractor, fits TD9-D4, HD5 or 6, $1000; Sam nnn-nnn-nnnn (Bickleton WA)

International 135, has clutch, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

International 350 Hi-Utility, fast hitch, 1 remote, runs, needs TA work, $1000; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

International 460 Utility, 282 cubic inch diesel engine, $1530 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International and cub wheel weights, $150 for rear and $90 for front; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

International Harvester O4 tractor, super narrow, may be vineyard model, fairly complete barn find kept under cover, needs restoration, $600; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

International Skidsteer 3200 Series from the mid-seventies, bad hydraulic pump, been sitting for a few years. Motor is a Wisconsin V4 and does turn over, good tires, as is. $1600; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

International TD6 stock. Few years ago added a hydraulic pump to the PTO and a 15 gallon tank and oil cooler. $2100 FOB Merlin OR; Will Beach nnn-nnn-nnnn or xxxx@xxxx.xxx (Merlin OR)

John Deere .090 rebore kit, for early styled B tractors SN 96000-201000, includes pistons, pins and rings, originally purchased from Yesterdays Tractors, $325; Larry nnn-nnn-nnnn (Placerville CA)

John Deere 1010 and 440I wheel tractors, just parted out and on the shelf, most parts available, many are the same as 420 and 430 models. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 1010 crawler, gas engine, reverser, PTO, auxiliary hydraulic valve, 6 way hydraulic blade, runs well, good undercarriage; Wayne nnn-nnn-nnnn (Prineville OR)

John Deere 2030 with tandem disc ready to work or great to paint and go in parades, $6200; Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere 26-inch waffle wheels in great condition, no rust, good mounting holes, $400; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

John Deere 30-inch wheel cast centers, part #F1590R, $100; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

John Deere 420 in excellent shape, everything works well, call or text, $3000; Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere 420C, parts for sale: blade, engine parts, rollers, front idlers, other parts, offers; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere 420W, starts easily, runs and drives well, in very good mechanical condition. Sheet metal, transmission, wheels and tires are all very good. The hydraulics, three point hitch and PTO work well as they should. Engine was overhauled about 10 years ago and has about 150 hours since rebuild. One big bonus is the factory power steering making it easy to drive. $3900; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 430W, SN 157506, runs well, power steering, extra rear tire, has #35 loader that could go with it for additional $500, hydraulics donĺt work, $2900 obo; Perry Pinkerton nnn-nnn-nnnn (Hillsboro OR)

John Deere 50 and 60 parted out, lots left: crank, head, grill, hood, plus miscellaneous parts; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

John Deere 520, parade or ready to work, $4000, call or text; Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere 60 for parts or repair, missing carb and clutch assembly, fair tires and tin, engine will turn but has stuck valves, $600 obo, email or text for more information; Jake Winn nnn-nnn-nnnn (Albany OR)

John Deere 60, narrow front with Roll-o-Matic, 42-inch rear wheels, $1800; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 630 row crop with #45 loader converted to hydraulic dump. Brakes done last year and manifold set the year before. This is a low hour tractor, 3500 hours, am the third owner. Second owner bought it in the 1960s and bought from him in 2002. Tractor has power steering, Roll-a-matic and 3 pt. hitch with original top link. Good tires all around and sheet metal is straight except for the battery box rust and dents in grille. Always starts and runs greats, never uses any oil. Iĺve used it every year to cut and bale hay as well as any tillage chores around my place. Ready to go to work or make a great restoration, $5500; Jim Temple nnn-nnn-nnnn (Noti OR)

John Deere A, 1937, 2 available, not running; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)

John Deere A, 1938, SN 466603, runs parades and tractor drives, has decent tires, comes with #5 JD mower that works well, $1500 obo; Glen Carrigan nnn-nnn-nnnn (Moses Lake WA)

John Deere A, 1945, wide front, 12V system with alternator, fair tires, running condition, pictures upon request; Bill nnn-nnn-nnnn or xxxx@xxxx.xxx (Covelo CA)

John Deere A, 1950, SN 648000, runs excellent, former puller from Idaho, older restoration used daily with 3pt, good tractor, $1700 obo; Glen Carrigan nnn-nnn-nnnn (Moses Lake WA)

John Deere A, 1952, SN 690171, new magneto, carburetor rebuilt, runs good, very restorable, $1000 obo; Glen Carrigan nnn-nnn-nnnn (Moses Lake WA)

John Deere AR, $1900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere AW high clearance, 1950, starts easily and runs and drives well. Is in good mechanical condition. Sheet metal is fair, rear tires are 12.4x42 in excellent condition. Hydraulics and PTO work well as they should. Has been used at many of our plow days to pull a JD 44H plow with hydraulic lift that is also for sale separately. AWĺs hydraulics worked the plow. $2900, email for photos, Youtube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere B, 1943, nice paint, hand start, $1500. 620 LP black dash, runs on 16 inch single front with 3pt, no top link, dual hydraulic airstack, $2750 each or $5000 for both, 60 low seat standard rebuilt engine, rough sheet metal, $2000; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

John Deere B, 1943, WW2 model, no electric start, fair tires, running condition; Bill nnn-nnn-nnnn or xxxx@xxxx.xxx (Covelo CA)

John Deere B, unstyled, factory round spoke rears, fully restored with too much done to list, asking $3950; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere belt pulley, L-LA, good condition, $250. L-LA drive shaft cover, $100; Dave Itel nnn-nnn-nnnn (Aurora OR)

John Deere BN high clearance, complete and working cultivator setup, good hydraulics, very nice tractors, asking $2000 obo; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere BO Lindeman, 1943, overhauled engine, $5500; Mervyn nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur dĺAlene ID)

John Deere Bs, 1950 restored B, $4500. 1943 BN, 80% restored, all there, new front tire. Both have new rear tires but are weathered, will make a deal on both. Call for more information; Dale Bybee nnn-nnn-nnnn or xxxx@xxxx.xxx (Acton CA)

John Deere BW, 1948, mostly complete, wide front is in fair shape, right hand tie rod is broken, 42 inch rear wheels/tires, engine stuck, $900 obo, email or text for more information; Jake Winn nnn-nnn-nnnn (Albany OR)

John Deere D fenders and other parts for sale; Phil DoMoe nnn-nnn-nnnn (Red Bluff CA)

John Deere D live hydraulic system, $150; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere D, 1944, flywheel start, excellent condition, $2900 firm. Getting rid of collection and this is my favorite; Perry Pinkerton nnn-nnn-nnnn (Hillsboro OR)

John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

John Deere D, 1950, #D184246, nice tractor, new 18.4 rear tires, been used in parades, $3800; Donald Nystrom nnn-nnn-nnnn (Bonners Ferry ID)

John Deere D, stuck, $675; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere GP, 1931 orchard tractor, restored, runs and looks great. SN 15027, $8500; Mark nnn-nnn-nnnn (Creswell OR)

John Deere GW, 1947, pan seat, around 120 made, engine turns, mostly complete, wide front end in good condition, $3750 obo, email or text for more information; Jake Winn nnn-nnn-nnnn (Albany OR)

John Deere H front mushroom wheel weights, $400 for the pair; Todd Penery nnn-nnn-nnnn (Placerville CA)

John Deere H, SN 48630, $3500; J.H. Keith nnn-nnn-nnnn (Hermiston OR)

John Deere H, SN 56498, 1945, hand start, runs well, needs one tire, fuel tank flushed, $1150 obo, call for more information; Larry Schwarz nnn-nnn-nnnn (Centralia WA)

John Deere L, 1939, comes with cultivator, runs good, nice tractor, $2500; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere LA ,1940s, with 6-foot sickle mower, running condition, new tires; Bill nnn-nnn-nnnn or xxxx@xxxx.xxx (Covelo CA)

John Deere LA, 1941, runs good, nice tractor, $2000; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere LA, 1941, with a plow, new tires, running condition; Bill nnn-nnn-nnnn or xxxx@xxxx.xxx (Covelo CA)

John Deere late styled BNs, 3 total, 2 are on 42 inch rear wheels, one on 38 inch, mostly complete, unknown engine conditions, $500 each, email or text for more information; Jake Winn nnn-nnn-nnnn (Albany OR)

John Deere Lindeman parts, 2 track frames, $75 each. One front idler bracket with spring, PN TE742, $75. One drawbar segment, $50. Make offer for all; Russell Brown nnn-nnn-nnnn or nnn-nnn-nnnn (Newberg OR)

John Deere M drawbar, $145; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

John Deere M good for parts or restore, make offer, call or text Jim for information or pictures; Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere M, 1948, comes with M20 sickle bar mower, fully restored, PTO, Touch-o-Matic, belt pulley, lights, umbrella, manuals, one owner until 2016, $4450; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

John Deere M, 1951, good rear tires, very good original condition, complete, starts easily, runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2600. Email for photos, Youtube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere MC, 1949, nice original, runs, factory blade/toolbar, $3000; Mervyn nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur dĺAlene ID)

John Deere MC, several old stamped pads, some good, some not, make offer on all 5; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

John Deere R, 1949, #R1118, looks and runs good, used in parades, $4800; Donald Nystrom nnn-nnn-nnnn (Bonners Ferry ID)

Kubota DT 185, 4x4, no loader, very good rubber, good older machine, $2475; Don Chappell nnn-nnn-nnnn (St Helens OR)

Kubota L 185, 2x4, no loader, very good rubber, engine stuck, no starter, good parts machine, $575; Don Chappell nnn-nnn-nnnn (St Helens OR)

Massey Ferguson 50?, tractor, backhoe and loader. Perkins engine, numerous oil leaks, but runs very well. Good farm machine, almost new 19.5x24 rear tires, $4500; Don Chappell nnn-nnn-nnnn (St. Helens OR)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

Massey Harris 101 Jr., 1941, runs, tires hold air, sheet metal good, pictures on request, $1350 obo; Stuart Wade nnn-nnn-nnnn no text please (Chico CA)

Massey Harris 55, diesel, was bought new when it came out; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)

McCormick Deering 10-20, Kay Bruner wheels, good period tines, rear fenders are repairable, hood and side panels are good, engine turns over, radiator needs repair, $550; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn (Chehalis WA)

McCormick Deering I-4, turns over, good shape, $950. O-4, runs, missing orchard sheet metal, $1000. O-4, very early motor stuck, missing orchard sheet metal. O-4 parting out: orchard belt pulley, shutters, plus miscellaneous. Rare ODS-6s, orchard diesel engine free and 1 parts tractor, both for $1600 obo; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

McCormick Deering TD-6 motor parts, block and head; Mark Parkeránnn-nnn-nnnná(Lebanon OR)

Minneapolis Moline rear wheel weights (UT 518), $100; Todd Penery nnn-nnn-nnnn (Placerville CA)

Oliver 28-44, has new fenders, rebuilt, radiator, magneto, rear axle bearing, has Kay Brunner wheels, $250; Dave Itel nnn-nnn-nnnn (Aurora OR)

Oliver 80, Wheatland, $1400; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Oliver 88 Standard, missing side panels, rears very good, fronts pickup tires, ran 3-4 years ago, been under cover, $1800; Jack Maki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Oliver OC3, Cletrac HG starter and magnetos from rebuilt to core, start at $75 each up to $225; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Panther crawler, two of only two dozen +/- remaining world wide, one good, one fair, $5500/$3500 negotiable (to a loving home!). More pictures available on request; Michael Hosford nnn-nnn-nnnn or xxxx@xxxx.xxx (Rocklin CA)

Parts: Ford 8N, engine and all components run well to include loader assembly less bucket. International I-6, 1944, trans and rear end disassembled, new parts and seals, engine runs well, all parts included. Both for $2200; Mike nnn-nnn-nnnn (Frazier Park CA)

Power Horse A20, 1938, made in Salt Lake City, UT, $8000; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Pump Meyers, bull dozer pump, $100; Dave Itel nnn-nnn-nnnn (Aurora OR)

Rims, 2 available, 12x36 inch, 2 rib rims, with tires (10-20%), $100 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rims, 2 available, clamp on duals, 12x24 inch, one with no tire one with 14x24 inch tire (40%), $200 for the set obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Satoh farm tractor, smaller, older, full hydraulic loader, been sitting for many years and motor stuck, one back brake band stuck, tires are like new, loader in very good condition, tractor has a driveshaft so motor could be swapped out, has wheel weights, $1700; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Super 88 Oliver diesel, wide front, factory 3 pt., good rubber all the way around, good paint, $5000; Sam nnn-nnn-nnnn (Bickleton WA)

Tires: 13.6x28 (2) on rusty Ford rims, $50. 400x19 (80%) $30; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Titan 10-20, 1917, model TV7158. Has been stored inside. Runs good. All original parts. Good condition, $19000 obo; Ray Jeffries nnn-nnn-nnnn (Palouse WA)

Tractor Collection: Farmall Cub, 1947, #709, completely refurbished 15 years ago, runs sweet, $2500. IHC Model M, 1950, narrow front, all options, Super M sleeves/pistons, excellent tires and sheet metal, $1750. Minneapolis Moline Z, 1947, narrow front, lift and 7-foot mower, $1500. MM Model BF, 1951, transitional model, $2250, take all for $7000. Moving, must sell; Russ Shorten nnn-nnn-nnnn (Dayton WA)

Twin City, JTS standard, 1936, J series transition to Minneapolis Moline, new tires, fuel tank, hood and paint. Steering wheel recovered with new rubber, classic arched front axle. Only 460 built. Only one in Oregon that is known of, please call for details and history, $2500; John nnn-nnn-nnnn (Medford OR)

Wanted radiator for a Stockton built Holt 75 any shape; Ken Mettler nnn-nnn-nnnn (Lodi CA)

Wheels, 2 available, 12x36 inch, 9 lug bolts on 9.5-inch circle, no tires, $100 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)