August 2018 - Misc. For Sale

All Classified Ads

Aermotor A602 windmill, 8 foot, in good shape, spins freely, no tower, $2000; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Graham WA)

Back blade, 6 foot, adjustable, $250; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

Billings & Spencer wrench display, complete with many wrenches. Wood with heavy steel pegs, sign at top with logo and metal tags at each set of pegs with wrench number on it. Very cool display piece; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Athol ID)

Black and Decker Super Service Valve Refacer, since 9/16, type NW, SN1043865, $400 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Black and Decker Valve Seat Grinder kit, model 1710-S, about 10 grinding stones and about 5 valve guide studs, $200 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Black walnuts washed, clean and cracked, $4/lb plus shipping; J.H. Keith nnn-nnn-nnnn (Hermiston OR)

Bridgeport milling machine, complete older vertical Bridgeport mill with 2 drive motors. 9x32 table with auto stop power feed. Oldie but a goodie, just needs a little care, $500; Bob Wolin nnn-nnn-nnnn (Jackson CA)

Briggs 3 hp engine with 6500 gph volume pump, pump is cast iron, never been used, $150; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

Cadillac service manual, 1979, $25; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Calkins seed cleaner and treater, $300; Jack Maki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Champion water pump, vertical, Peumatic Mfg. Co. with v belt, works, $100; Richard Hanna nnn-nnn-nnnn (Rexford MT)

Chevrolet 8-hole wheels, set of 4, $100. Set of 4, 6 hole Chevrolet wheels and tires, 80%, $250; Ed Bring nnn-nnn-nnnn (Molalla OR)

Chilton passenger car wiring diagram manual, 1-3/4x11x16, 1232 pages, fair condition, covers several different cars, American Motors, General Motors, Fords and Chryslers, $15; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Chrysler Industrial 6-cylinder flat head engine from old combine, ran when put in storage, $180 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Copper cupola and weathervane. Approximately 32x32 base and 64 inches tall. Weather green patina, $1100 obo; Don nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)

Corn stalk cutter, all enclosed, good original wood with striping, $165; Dennis Leischner nnn-nnn-nnnn (Damascus OR)

Cream separator, complete, $150; Owen Arnett nnn-nnn-nnnn (Nampa ID)

Farmall A drawbar, $80 obo. Farmall Cub one-way plow, $125 obo. One point hitch off a Farmall Cub, $125 obo; Florian Nordhus nnn-nnn-nnnn (Connell WA)

Feed Chopper, improved Swiss Mfg., JK Wilder and Sons patent 11/27/94, wood frame which appears to be original lettering, $250; Richard Hanna nnn-nnn-nnnn (Rexford MT)

Feed grinder, No. 3 by Appleton Mfg. Co. with flat belt, on skids, $200; Richard Hanna nnn-nnn-nnnn (Rexford MT)

Ferguson side mount mower, unused hydraulic lift, 6 foot, sickle bar belt drive, model FEO-35, $100; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Ferguson spring tooth harrow, 1942ish, type BO20, narrowed for vineyard work 5 foot, $350; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Foley Belsaw sharpening equipment, full set, includes books, $2500; Vern Fought nnn-nnn-nnnn (Exeter CA)

Ford factory shop manual, 1963, quick reference catalog, $45. Ford truck shop manual, 1976, volume 2, $40. Ford truck chassis parts catalog, 1948-1955, series 1-6, $50. Ford passenger car parts and accessories catalog, 1961, $35. Ford body parts catalog, 1944-1951, $55. Ford truck parts and accessories catalog, 1959, $45. Ford truck chassis parts manual, 1976, volume 1, $15. Ford medium/heavy truck shop manual, 1979, $25; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Fuller and Johnson pump jack, $775; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

Gibson single bit plow, $150; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

Gilson soil spreader, very old. Power glide 6 hp? Wards engine, $975 obo, some trades possible; Don Chappell nnn-nnn-nnnn (St. Helens OR)

Harley Davidson black roadmaster bicycle, 20 inch, $100, cash only; Ken Cereghino nnn-nnn-nnnn (Wilsonville OR)

Hay loader pulled behind wagon, $300; Jack Maki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Hay wagon, 94x16 ft, two separate sets of stairs off the back 21 inches. Wooden railing around platform, 26 inches tall. Pin hitch and painted John Deere colors. Tires are excellent condition, 7.50x16 on split rims. $1500 obo; Frank nnn-nnn-nnnn (Loomis OR)

Horse power with drag saw, needs restoration, $500; Jack Maki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Hot water steam cleaner, professional Sioux brand, 2 available, both are complete but in need of a few repairs, $1800 for the pair or possible trade for an International Cub tractor; Jerry Walusiak nnn-nnn-nnnn (Lebanon OR)

Hydraulic forklift for 3pt hitch, heavy duty, used to load pear bins, $350; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

IHC 7-foot sickle mower, No. 27v, good condition but needs sickle and pitman arm, original manual included, $185; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

International Harvester milk cream separator, model 3S, $180; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International Show Combine 2014 Red Power Roundup, Huron S.D., 1/16 scale, new in box, $200 plus shipping; Al Barkl nnn-nnn-nnnn (Elko NV)

John Deere 2 bottom plow; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)

John Deere 44H plow with hydraulic lift. This is a working plow with JD hydraulic cylinder. It has been used at many plow days, bottoms are in very good condition and have been built up and hard faced. Set up as a 2-14 plow, but the standards can be reversed to make a 2-16 plow. $595, photos at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 680 plow, 6-16 pull plow, big beam, correct for 830s, need some work, $800; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere L plow, $150. Belt tightener for sickle mower, $50; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere M-51 mower for rear of M, complete, needs pitman stick, $200; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere PTO hay conditioner; Fred Alexis nnn-nnn-nnnn or xxxx@xxxx.xxx (LaGrande OR)

John Deere tractor loader, Model 45, trip bucket, has all mounts for lettered and numbered series tractors, good condition, $150 obo. Model 35 loader, hydraulic tilt bucket, have stands and optional wide bucket, was mounted on a 420W, good condition, $350 obo, email or text for more information; Jake Winn nnn-nnn-nnnn (Albany OR)

Loader, Wagner, fully hydraulic, fits Ford/Ferguson $850; Wayne Sealock nnn-nnn-nnnn (Yakima WA)

Massey Harris horse drawn 8-foot weighted clod smasher with pressed steel seat, $200; Dennis Leischner nnn-nnn-nnnn (Damascus OR)

Massey Harris Pony equipment, 1-bottom plow, 7-foot disk, 7 foot sickle bar mower, cultivator parts, all for $125 or best offer for each piece; Florian Nordhus nnn-nnn-nnnn (Connell WA)

Maytag washer, old square tub, electric, $25; Owen Arnett nnn-nnn-nnnn (Nampa ID)

Maytag washing machine with long frame 92 engine, complete with flex exhaust hose, works, little rust around caster, $150; Richard Hanna nnn-nnn-nnnn (Rexford MT)

McCormick #64 pull behind combine, 7-foot, engine driven, some new belts, good canvas, $550 obo; Florian Nordhus nnn-nnn-nnnn (Connell WA)

Meat: Pure Duroc Pork butchering in October, $3 a pound hanging weight, half or whole; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Metal signs, automotive are aluminum, brew is steel, used, some dents, dings and scratches, $100; Don Clerici nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)

Montgomery potbellied wood stove with water jacket, K38-2, small but heavy, $150; Richard Hanna nnn-nnn-nnnn (Rexford MT)

Oil and grease pump, retro, 1950-1960, $200 each; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

Parco stainless steel backpack fire tanks (similar to Indian), 7 available, 5 gallon tank, right hand lever-operated in tank pump, been sitting and are in various condition, some missing parts, $60 for the best one; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Athol ID)

Plow: one horse walking plow and cultivator bought around 1934, complete and always shedded, $75 for both; Owen Arnett nnn-nnn-nnnn (Nampa ID)

Power Wagon Advertiser Magazine, whole copy paper box full of them from 1990s and 2000s. Also Supply Line, Army Motors and military vehicle magazines. Interesting articles, how-to tips and photos. Cheap to a good home; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Athol ID)

Pump jacks, two available, very large deep well use. One is FE Meyers; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Geyserville CA)

Rain Birds, brass, probably 100 altogether of various sizes; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Athol ID)

Rears 100 gallon stainless steel PacTank sprayer, 3pt, equipped with hose and spray gun, $850 cash only, great condition, possible spray boom sold separately; Ken Cereghino nnn-nnn-nnnn (Wilsonville OR)

Reed organ (pump organ), many parts, cheap, come and get them. Also some complete organs rebuilt and very nice; Owen Arnett nnn-nnn-nnnn (Nampa ID)

Renfro Plate Clamps, for lifting up to 1 inch plate vertically, 2 ton capacity, 1 JPA model and 1 SM model; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Athol ID)

Singer and Feather Weight sewing machine in nice original carrying case, $550; J.H. Keith nnn-nnn-nnnn (Hermiston OR)

Speidel Weed Wiper, 30 foot, wicks nearly new, $500; Duane nnn-nnn-nnnn (Glenoma WA)

Steel bins, 4x4, with skids, forkliftable and stackable, roughly 2 foot sides. Super handy for storage, scrap, you name it and they don’t rot like wood. 20+ available, $100 each; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Geyserville CA)

Steel shelving, have a lot of shelf runners, but no uprights, make offer; J.H. Keith nnn-nnn-nnnn (Hermiston OR)

Structural pipe, 15 pieces, 4 inch, heavy galvanized, could be columns for tractor shed, $3 per foot or good offer; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires and wheels for Honda, $25 each and up; Ed Bring nnn-nnn-nnnn (Molalla OR)

Tonka toys, several including trucks and loader, mid-seventies, $30 each and up; Joe Giordano nnn-nnn-nnnn (Port Orchard WA)

Toro wood chipper with new carburetor, $450; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

Trailer, 20-foot gooseneck, GVW 22,000 lb, 12-foot bed, dumps, $6500; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Trash burner, small antique wood stove, $300; J.H. Keith nnn-nnn-nnnn (Hermiston OR)

Truck flatbed, aluminum, 23-foot, heavy duty, 8-foot-wide, $3000; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Upright phonograph with records, one family owned since new, $550 obo; Owen Arnett nnn-nnn-nnnn (Nampa ID)

Van Brunt walk behind grain drill, $350; Jack Maki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Vertical milling machine, 9x42 table, tight, but missing some parts. No drive motor, has oil pump for ways. Will load, $250; Bob Wolin nnn-nnn-nnnn (Jackson CA)

Visible gas pump, Wayne 526 gas pump made into yard light, Gilmore brand globe (reproduction) and decals, inside removed, bolted on cement pad. Original glass, have hose and brass nozzle, buyer to remove, new lowered price, $2100, email for pictures and details; Kathy Repp nnn-nnn-nnnn or xxxx@xxxx.xxx (Snohomish WA)

Water pump, FE Meyers, Bulldozer with 15 inch diameter flat belt, works, patent dates 1921, original decal, $200; Richard Hanna nnn-nnn-nnnn (Rexford MT)

Water pump, typhoon type, stamped T2X3 23723, 12 inch diameter, flat belt, works, $250; Richard Hanna nnn-nnn-nnnn (Rexford MT)

Water pumps, 1-man FE Meyers, stuck $75. 2 man Columbian Pump Co. works, $100. Used to pump water to steam engines and for horse water systems in the early 1900s; Richard Hanna nnn-nnn-nnnn (Rexford MT)

Wheel weights, fit a 16 in wheel, 2 sets available; J.H. Keith nnn-nnn-nnnn (Hermiston OR)

Wheels, cast iron, 10 feet by 16 inches, $1000. 7 feet by 14 inches, $800; Terry Wolbert nnn-nnn-nnnn texts won’t be answered (Yamhill OR)