September 2018 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, runs, good condition, $4000 obo; Ed Bring nnn-nnn-nnnn (Molalla OR)

Allis Chalmers RC, 1939, older restoration, very rare, runs good, good tires, pictures on request, $2500 obo; Stuart Wade nnn-nnn-nnnn no text please (Chico CA)

Case C, S or R F&H HC245 rear round spoke wheels 9x24, $300. Case C S D parts, Case DC-4 with heart shaped front end, hand clutch, live pto, hydraulic and eagle hitch, runs, need some tinkering, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case DC rear half, 98 inches wide, with fuel tank, fenders, wheel centers, single disc brakes, vin tag, drawbar, single hydraulic pump. 1953 Case DC for parts, no cylinder head or hood, incomplete eagle hitch, broken adjustable wide front, 1 rear wheel weight. Moving must sell; Dave nnn-nnn-nnnn (Hillsboro OR)

Case SC, 1950, runs great, all sheet metal intact (fenders could use some restoration), rear tires good, front tire fair, working hydraulics and PTO. Email for photos, $1200 obo; Roy Murray nnn-nnn-nnnn or xxxx@xxxx.xxx (Woodland CA)

Case SC, tin excellent, new front tires, good rears, needs head work, $750; Ed Bring nnn-nnn-nnnn (Molalla OR)

Case tractor parts. Several engines and parts for VA, S, D, LA, 300s, 400, Racine and others. Lots of used engine parts and fenders for most and sheet metal for most models. Rims and tires too. Whole tractors including C, CO and CCs, VAO with orchard fenders, big 400s and others. Several radiators, engine blocks, you name it for 830s, 930s, western specials (complete tractors). 45 years of collecting, call for needs and more information; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)

Case tractors and parts: VA, VAC with tricycle front end, (2) VAC-14 with Eagle hitch, VAI with adjustable front axle. Lots of parts, sheet metal, gasket sets, radiators, etc. Tractors $100 each, parts and pieces very negotiable. Hate to get rid of them, but they have to go; Al Downs nnn-nnn-nnnn (Tacoma WA)

Caterpillar 15 parts, enough for 2 tractors, 2 radiators, 3 fuel tanks, 2 chassis, 1 complete engine, 2 sets fenders, hood, parts, buyer takes all, $950; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar 22 1J WSP, wide pad, runs and drives, needs valve job, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Caterpillar 22, 1934, SN 2F 961, engine, radiator, rear end with sprockets, needs overhaul, $600; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Caterpillar D4 radiator, fuel tank, $550; Lorry Dunning nnn-nnn-nnnn (Davis CA)

Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac crawler with very strong running 226 cubic inch 6-cylinder Continental engine. About 50 hours on overhauled engine, compression tests are within factory specifications, rare dual PTO, standard 6 spline, 540 rpm, flat belt pulley off to the side for running antique implements like a buzz saw or a thresher. Drives and steers perfectly. Come see it run. Have too many toys and need to downsize. Buzz saw available separately, $2500; Pete Macfarlane nnn-nnn-nnnn (Kuna ID)

Earthmaster Model C, 1948, N62 Continental engine, good front and rear tires, 80% engine and hydraulics overhauled, new carb and gear oil, very nice show tractor, runs good, stored inside, $2100 obo; M. Beld nnn-nnn-nnnn evenings or xxxx@xxxx.xxx (Lynden WA)

Farmall 140, call or text; Tom Landon nnn-nnn-nnnn (Colburn ID)

Farmall 460 cylinder head, came from 6 cylinder, 236 cubic inch diesel engine, $180 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Farmall A and Cub swinging drawbar, U-shaped, $185 for both pieces; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

Farmall A, tires ok, engine stuck, needs some parts, $300. Have many other parts as well for A, B, C, H, and M, what do you need?; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall B, 1947, hi crop conversion kit, passenger seat all factory parts except seat cushion. All it needs is paint. Too many new parts to list. Made in Louisville. $2475; Roger Lepage nnn-nnn-nnnn (Redding CA)

Farmall Cub, 1948, runs, front blade, plow, disc, and all four wheel weights, good condition, tires and rims good, has been garaged for last 43 years, SN 36258, manual controls, $1200; Jerald Jacobs nnn-nnn-nnnn (Washougal WA)

Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall H, 1950, SN 333471X1, FBH, no radiator, tin excellent, wide front, engine free, needs tires, can load, $750 obo; Larry Manley nnn-nnn-nnnn (Dorris CA)

Farmall H, late 40s-50s, wide front, power lift draw bar, barn fresh, good rubber, $1100 obo; Stuart Wade nnn-nnn-nnnn no text please (Chico CA)

Farmall M, 1942 wide front, engine is stuck but looks complete, tires air up, includes extra set of rear rims in good condition. This rig needs to go so I’m reducing the price one last time, $500. I’m losing my storage space so I’m forced to sacrifice his classic tractor. I will consider trades for Ferguson or Dearborn implements. Tours, ice water and stories you haven’t heard before are still offered and help loading, usually all hours; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Farmall M, 1948, SN FBK155788X1, needs carb and starter, tin good, has belt drive, narrow front, needs wheel and two rims, needs tires, $500 obo; Larry Manley nnn-nnn-nnnn (Dorris CA)

Farmall M, extremely straight in work clothes, almost new 12.4x38 tires, runs like “eating out of your hand”, factory power steering, steers with one finger, factory wide front end, converted to 12v with alternator, very fine example of American farm tractor, $3750. Willing to accept some trades and offers considered; Don Chappell nnn-nnn-nnnn (St. Helens OR)

Farmall McCormick 460, runs very well, loader, no bucket, new fronts, rears good, new wheels, $1750; Ed Bring nnn-nnn-nnnn (Molalla OR)

Farmall sheet metal from A to 450 plus miscellaneous parts. Super M motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Ferguson TO-30, runs good, lift works but doesn’t hold, good rubber, $1200 obo; Wes Allen nnn-nnn-nnnn (Live Oak CA)

Ferguson TO-35, SN 62990, backhoe and front loader, nice working tractor, have pictures, $4000 obo; Prentiss nnn-nnn-nnnn (Mountain Center CA)

Ford 4000, 1964, SN 41201-58165, restored and painted, good tires, have pictures, $4800 obo; Prentiss nnn-nnn-nnnn (Mountain Center CA)

Ford 740, 1955, fully restored, Howard lo range, power steering, rest-o-ride seat, lights, umbrella, drawbar, new tires, $4600; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Ford 800, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 800, diesel, 5 speed, with hydraulic loader, needs work, $1200; Gary nnn-nnn-nnnn (Sheridan OR)

Ford 8N, 1951, SN 8N-414276, restored, pictures on request, $4800 obo; Prentiss nnn-nnn-nnnn (Mountain Center CA)

Ford 8N, 2N, 9N, reproduction rear fender, $65; Todd Penery nnn-nnn-nnnn (Placerville CA)

Ford 8N/9N PTO unit with flat belt pulley, $100; Owen Arnett nnn-nnn-nnnn (Nampa ID)

Ford 9N steel rear lugged rear wheels. Make offer; Owen Arnett nnn-nnn-nnnn (Nampa ID)

Ford 9N, new battery, almost new rear tires, use it or show it condition, $3000; WS VanGundy nnn-nnn-nnnn (Cottonwood CA)

Ford Golden Jubilee, 1953, fully restored, immaculate, lights, bumper, drawbar, umbrella, new tires, $5800 obo; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Ford parts: 8N front wheel weights, 16 inch, $100. 9N front wheel weights, $100, 9N rear wheels, $100 each. Misc. sheet metal; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Gibson, 1948, Model E. 26-foot Hyway cargo trailer. Gas golfcart. Manure spreader revised for parades. All one package, all in good condition, $12500; Bob Vogel nnn-nnn-nnnn (Santa Paula CA)

Harris Power Horse, 4-wheel drive, $3500 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Hercules IXB5 with clutch and starter, $200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

International 135, has clutch, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

International 350 Hi-Utility, fast hitch, 1 remote, runs, needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 460 Utility, 282 cubic inch diesel engine, $1530 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International and cub wheel weights, $150 for rear and $90 for front; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

International belt pulleys, both 4 bolt and 3 inch centers, one is 9.5 inches and one is 11 inches in diameter, $50 each; Wayne Sealock nnn-nnn-nnnn (Yakima WA)

John Deere .090 rebore kit, for early styled B tractors SN 96000-201000, includes pistons, pins, retainers, and rings, originally purchased from Yesterdays Tractors, $325; Larry nnn-nnn-nnnn (Placerville CA)

John Deere 1010 and 440I wheel tractors, just parted out and on the shelf, most parts available, many are the same as 420 and 430 models. See at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 2030 with tandem disc ready to work or great to paint and go in parades, $6200; Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere 26-inch waffle wheels in great condition, no rust, good mounting holes, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 30-inch wheel cast centers, part #F1590R, $100; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 420 in excellent shape, everything works well, call or text, $3000; Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere 420C, good condition, runs good, has aftermarket loader that would be easy to remove, $2000; Vern Fought nnn-nnn-nnnn texting is best (Exeter CA)

John Deere 420C, parts for sale: blade, engine parts, rollers, front idlers, other parts, offers; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere 420T, excellent condition, works good, new paint and decals, good tires, nice show tractor, a lot of new parts, new battery, 3pt, runs and starts good, $2950 obo; M. Beld nnn-nnn-nnnn evenings after 6 (Lynden WA)

John Deere 420W, starts easily, runs and drives well, in very good mechanical condition. Sheet metal, transmission, wheels and tires are all very good. The hydraulics, three point hitch and PTO work well as they should. Engine was overhauled about 10 years ago and has about 150 hours since rebuild. One big bonus is the factory power steering making it easy to drive. $3900; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 430W, SN 157506, runs well, power steering, extra rear tire, has #35 loader that could go with it for additional $500, hydraulics don’t work, $2900 obo; Perry Pinkerton nnn-nnn-nnnn (Hillsboro OR)

John Deere 440 crawler rear belly pan, $100; J. Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 50 and 60 parted out, lots left: crank, head, grill, hood, plus miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 520, parade or ready to work, $4000, call or text; Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere 60, narrow front with Roll-o-Matic, 42-inch rear wheels, $1800; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere A, 1937, unstyled, rebuilt magneto and carburetor, runs good, clean tractor, tires cracked, $1800; David Covert nnn-nnn-nnnn or nnn-nnn-nnnn (Kuna ID)

John Deere A, 1945, wide front, 12V system with alternator, fair tires, running condition, pictures upon request; Bill nnn-nnn-nnnn or xxxx@xxxx.xxx (Covelo CA)

John Deere AR, $1900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere AW high clearance, 1950, starts easily and runs and drives well. Is in good mechanical condition. Sheet metal is fair, rear tires are 12.4x42 in excellent condition. Hydraulics and PTO work well as they should. Has been used at many of our plow days to pull a JD 44H plow with hydraulic lift that is also for sale separately. AW’s hydraulics worked the plow. $2900, email for photos, Youtube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere B, 1935, SN 10645, have a brass tag, older restoration, 4 new tires, ran when parked, $1850 obo, moving; Dave nnn-nnn-nnnn (Redding CA)

John Deere B, 1936, unstyled, short frame with rockshaft, new tires front and back, F&H wheels, new muffler, radiator core, gas manifold. Timed for gas, about 28 BTDC, new gas tank cover, Jordie’s decals and more. Nice. $3500; Frank Stricklin nnn-nnn-nnnn or xxxx@xxxx.xxx (Silverdale WA)

John Deere B, 1943, nice paint, hand start, $1500. 620 LP black dash, runs on 16 inch single front with 3pt, no top link, dual hydraulic airstack, $2750 each or $5000 for both, 60 low seat standard rebuilt engine, rough sheet metal, $2000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere B, 1943, WW2 model, no electric start, fair tires, running condition; Bill nnn-nnn-nnnn or xxxx@xxxx.xxx (Covelo CA)

John Deere B: convert your styled B from tricycle front end to factory correct wide front end. I have both the earlier style with A1100R axle, $1195 includes pedestal, and the later round tube style, $995 without pedestal but they are available. Pick up here or can ship truck freight. Email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere belt pulley, L-LA, good condition, $250. L-LA drive shaft cover, $100; Dave Itel nnn-nnn-nnnn (Aurora OR)

John Deere BO Lindeman, 1943, overhauled engine, $5500; Mervyn nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d’Alene ID)

John Deere BWHs, 1945 and 1946, both on spoke rear wheels, rough but the real thing with confirmed serial number search documents, $2400 each or both for $4000; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere D, 1944, flywheel start, excellent condition, $2900 firm. Getting rid of collection and this is my favorite; Perry Pinkerton nnn-nnn-nnnn (Hillsboro OR)

John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere fenders, have number on it for 7720 or 7420, may fit others, $250 obo you haul unable to ship; Carol nnn-nnn-nnnn (Keno OR)

John Deere GP, 1931 orchard tractor, restored, runs and looks great. SN 15027, $8500; Mark nnn-nnn-nnnn (Creswell OR)

John Deere H front mushroom wheel weights, $400 for the pair; Todd Penery nnn-nnn-nnnn (Placerville CA)

John Deere H, 1942, excellent condition, electric start, new rear tires, front good, parade ready, have had in parades for 6 years, new paint and decals, runs and starts good, $2900; M. Beld nnn-nnn-nnnn evenings after 6 (Lynden WA)

John Deere L, 1939, comes with cultivator, runs good, nice tractor, $2500; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere LA ,1940s, with 6-foot sickle mower, running condition, new tires; Bill nnn-nnn-nnnn or xxxx@xxxx.xxx (Covelo CA)

John Deere LA, 1941, runs good, nice tractor, $2000; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

John Deere LA, 1941, with a plow, new tires, running condition; Bill nnn-nnn-nnnn or xxxx@xxxx.xxx (Covelo CA)

John Deere Lindeman parts, 2 track frames, $75 each. One front idler bracket with spring, PN TE742, $75. One drawbar segment, $50. Make offer for all; Russell Brown nnn-nnn-nnnn or nnn-nnn-nnnn (Newberg OR)

John Deere M drawbar, $145; Dave Pearsall nnn-nnn-nnnn (Olympia WA)

John Deere M good for parts or restore, make offer, call or text Jim for information or pictures; Jim Koontz nnn-nnn-nnnn (Ducor CA)

John Deere M, 1948, comes with M20 sickle bar mower, fully restored, PTO, Touch-o-Matic, belt pulley, lights, umbrella, manuals, one owner until 2016, $4450; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

John Deere M, 1951, good rear tires, very good original condition, complete, starts easily, runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2600. Email for photos, Youtube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere MC, 1951, excellent condition, has new steering clutches and brake bands on both sides, undercarriage is 98%, extremely rare orchard exhaust, strong motor with 90 PSI in both cylinders, custom C frame has manual angle and hidden hydraulic line design, new seals in both rams, fresh paint, leave message or text for more information; Travis Hockel nnn-nnn-nnnn (Sprague River OR)

John Deere MC, complete with dozer, need work, plus extra M-1000 dozer and lots of parts; Ralph nnn-nnn-nnnn (Wolf Creek OR)

John Deere MI, 1951, SN 10379, runs good, rare tractor, just over 1000 produced, extra parts included, call for more information, $1500; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

John Deere MT, 1950, comes with loader and back blade, runs good, $1600; Rich nnn-nnn-nnnn (Moses Lake WA)

John Deere MT, 1951, running, $3000 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere MTs: 1950, SN 22653, good paint, runs good, good tires. 1951, SN 33097, good paint, good tires, runs good, $2500 each; Clark Higley nnn-nnn-nnnn (Kimberly ID)

Massey Ferguson 130 vineyard, runs and drives, but has issues. Includes MF130 parts tractor, call for more info, $2950 cash; Mike Roberts nnn-nnn-nnnn (Puyallup WA)

Massey Ferguson 2135 fairway tractor, SN 648000447, have pictures, $4500 obo; Prentiss nnn-nnn-nnnn (Mountain Center CA)

Massey Ferguson 50?, tractor, backhoe and loader. Perkins engine, numerous oil leaks, but runs very well. Good farm machine, almost new 19.5x24 rear tires, $4500; Don Chappell nnn-nnn-nnnn (St. Helens OR)

Massey Ferguson 98, tractor is restored, rare model, 3-71 GM engine, call for details, $15000; Dave nnn-nnn-nnnn (Aurora OR)

Massey Ferguson MF 50, SN 920009-M4, needs work, $800 obo; Prentiss nnn-nnn-nnnn (Mountain Center CA)

Massey Harris 101 Jr. Standard, runs, needs side panels, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Massey Harris 101 Jr., 1941, runs, tires hold air, sheet metal good, pictures on request, reduced price $1300 obo; Stuart Wade nnn-nnn-nnnn no text please (Chico CA)

Massey Pony farm tractor, motor turns over, hasn’t run in years, tires hold air but need replaced, rims solid, nice sheet metal, would make a nice restoration or use for parts, very restorable, $1500; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)

McCormick Deering 10-20, Kay Bruner wheels, good period tines, rear fenders are repairable, hood and side panels are good, engine turns over, radiator needs repair, $550; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn (Chehalis WA)

McCormick Deering I-4, turns over, good shape, $950. O-4, runs, missing orchard sheet metal, $1000. O-4, very early motor stuck, missing orchard sheet metal. O-4 parting out: orchard belt pulley, shutters, plus miscellaneous. Rare ODS-6s, orchard diesel engine free and 1 parts tractor, both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering TD-6 motor parts, block and head; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering, KOC809398 best that can be made out, tires are shot, motor turns over, $700; Vern Fought nnn-nnn-nnnn texting is best (Exeter CA)

McCormick WD9, in work clothes but still looks good. Has a drum winch on back, live hydraulic although not presently installed, but they do work well. Has a loader that comes with it, hence the live hydraulics. Loader taken off to do some work on her and never put back on. Loader bucket used on another project. Pictures should say it all, good tires, alternator, converted mag to electronic ignition, so it starts great; Gale nnn-nnn-nnnn (Olalla WA)

Minneapolis Moline rear wheel weights, UT 518, $100 for pair; Todd Penery nnn-nnn-nnnn (Placerville CA)

Multiple tractors, will sell individually or as a lot. Avery A, wide front. Wards Twin row crop front. Minneapolis Moline BF wide front. Engines are stuck, some new front tires, tractors are virtually complete, need restoring; Garland Goesch nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Townsend WA)

Oliver 28-44, has new fenders, rebuilt, radiator, magneto, rear axle bearing, has Kay Brunner wheels, $250; Dave Itel nnn-nnn-nnnn (Aurora OR)

Oliver 80, Wheatland, $1400; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Oliver 88 Standard, missing side panels, rears very good, fronts pickup tires, ran 3-4 years ago, been under cover, $1800; Jack Maki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Oliver HG, 1942, older restoration, has about 40 hours total run time on restoration, engine rebuilt, new steering bands, has PTO and belt pulley, under carriage about 80%+ about as good as you will find, $4200 obo; Norm nnn-nnn-nnnn (Bellingham WA)

Oliver, misc parts for magnetos, starters, sheet metal, nice original grille with side curtains, hood, etc; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)

Panther crawler, two of only two dozen +/- remaining world wide, one good, one fair, $5500/$3500 negotiable (to a loving home!). More pictures available on request; Michael Hosford nnn-nnn-nnnn or xxxx@xxxx.xxx (Rocklin CA)

Parts: Case 310 carcass, $250. International TD6 hard nose, $100; Tony Carbaugh nnn-nnn-nnnn (Turner OR)

Power Horse A20, 1938, made in Salt Lake City, UT, $8000; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Pump Meyers, bull dozer pump, $100; Dave Itel nnn-nnn-nnnn (Aurora OR)

Rims, 2 available, 12x36 inch, 2 rib rims, with tires (10-20%), $100 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rims, 2 available, clamp on duals, 12x24 inch, one with no tire one with 14x24 inch tire (40%), $200 for the set obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Satoh farm tractor with full hydraulic loader, sat for many years, someone put a one cylinder motor in it (which is now stuck) with a driveshaft and pillow block bearings, motor is bad, could easily be put back to original or put another motor in it. Tires are like new, has wheel weights, $1650; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)

Tire and tube, 7.50x22 for John Deere L, 80% good rubber, $300; Clark Higley nnn-nnn-nnnn (Kimberly ID)

Tire, front for Ford or Ferguson, 4x19. Moving must sell; Dave nnn-nnn-nnnn (Hillsboro OR)

Tires, 7.50x24 old, been sitting in a shed for years, like new, were never used, still have nubs on them, $350 for the pair, hard to find, would be nice on a small tractor; Joe Giordano nnn-nnn-nnnn xxxx@xxxx.xxx (Port Orchard WA)

Tires: 13.6x28 (2) on rusty Ford rims, $50. 400x19 (80%) $30; Dennis McClain nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

Titan 10-20, 1917, model TV7158. Has been stored inside. Runs good. All original parts. Good condition, $19000 obo; Ray Jeffries nnn-nnn-nnnn (Palouse WA)

Tractor Collection: Farmall Cub, 1947, #709, completely refurbished 15 years ago, runs sweet, $2500. IHC Model M, 1950, narrow front, all options, Super M sleeves/pistons, excellent tires and sheet metal, $1750. Minneapolis Moline Z, 1947, narrow front, lift and 7-foot mower, $1500. MM Model BF, 1951, transitional model, $2250, take all for $7000. Moving, must sell; Russ Shorten nnn-nnn-nnnn (Dayton WA)

Twin City, JTS standard, 1936, J series transition to Minneapolis Moline, new tires, fuel tank, hood and paint. Steering wheel recovered with new rubber, classic arched front axle. Only 460 built. Only one in Oregon that is known of, please call for details and history, $2500; John nnn-nnn-nnnn (Medford OR)

Wheels, 2 available, 12x36 inch, 9 lug bolts on 9.5-inch circle, no tires, $100 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)