Allis Chalmers B, 1939, parade quality, you won’t be disappointed, $2500; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)
Allis Chalmers G, has rebuilt motor, tires fair, $2000; Vern Fought nnn-nnn-nnnn (Exeter CA)
Allis Chalmers IBs, two tractors, one mainly for parts, other is restorable, take them both for $500; Zack Peterson nnn-nnn-nnnn or xxxx@xxxx.xxx (Corvallis OR)
Allis Chalmers M crawler, wide gauge, 20 inch pads, PTO, hydraulic controls, brackets for blade, blade not hooked up, 4 extra sprockets, extra front idler, extra fuel tank, carburetor and mag parts, clutch discs, runs and looks good, $1500 for all; Gary White nnn-nnn-nnnn (Yamhill OR)
Allis Chalmers Ms, 1 top seat with blade and 1 tail seat, $800 for the pair; Harry Lindahl nnn-nnn-nnnn no messages (Richvale CA)
Allis Chalmers Roto Baler PTO drive, $795; Hubert Bierly nnn-nnn-nnnn (Bend OR)
Allis Monarch 35, parting out; Buck Evans nnn-nnn-nnnn (Greenville IL)
Avery V, 1947, runs well, some noise in the transmission, tin is great, like new tires, new lights, new wire harness, new muffler, $2500; Roger Hahn nnn-nnn-nnnn or xxxx@xxxx.xxx (Glendora CA)
Case C, 1937, runs, last shown at the 2018 Branch 245 show, $1800, pictures on request; Nick nnn-nnn-nnnn (Seabeck WA)
Case C, D and S, have runners and parts tractors; Dave Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case C, S or R F&H HC245 rear round spoke wheels 9x24, $300. Case C S D parts, Case DC-4 with heart shaped front end, hand clutch, live pto, hydraulic and eagle hitch, runs, need some tinkering, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CO, 1929, very good restoration project, on cut offs, engine loose, not running, $500; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case S front axle, wheels, drag link, $100; Buck Evans nnn-nnn-nnnn (Greenville IL)
Case SC, wide front, new tires, engine junk, $300; Harry Lindahl nnn-nnn-nnnn no messages (Richvale CA)
Case VAC, 1951, wide adjustable front axle with Eagle hitch, new rear tires, straight sheet metal, running tractor, $650; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case VAI, parts tractor or restore, $250; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Caterpillar 10, 20, 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar 22 1J WSP wide pad runs and drives, needs valve job, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Caterpillar 22, wide gauge, SN 2F8638W, not running, but engine free and gear boxes are free, carburetor and mag have been rebuilt and has extra intake/exhaust manifold, pictures on request, $1200; Gary Strausbaugh nnn-nnn-nnnn or xxxx@xxxx.xxx (Salem OR)
Caterpillar 22s, three total, have had all running, negotiable; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)
Caterpillar 30 carb needs kit, $450; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar 30 exhaust manifold late style nice, $350; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar 30 piston ring set, .060 over, Hastings brand, $250; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar 50 gas carburetor, early style, $800; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar 60 air cleaner body has dents, $300; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar 60 cast arm rests, $150; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar 60 fan shroud, new reproduction, $450; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar 60 late style carb, needs kit, $600; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar 60 old style heat box with brass tubes, heat box lever, $300; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar D2s, both were dad’s, so don’t know much about them, one was being rebuilt and one for parts. He passed away just as he was to start pouring the babbit bearings, so both are a basket case, tracks are good and clutches apparently work. A 15 hp motor was put on the back so they could be moved around. Call or text; Rob Scott nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
Caterpillar D2s: 5J9817 Traxcavator. 5J9572 track crawler. 5U13624 orchard parts. J185 with blade, buy them all, all need work, $4800; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)
Caterpillar gas 70 seat cushions, new Hahn, $850; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar headlights, 3 pieces, small mesh wire, $100 each; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar RD6 and up pony engine carburetor with air cleaner attachments, K5-K6 style, $350 each; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Caterpillar thurmoids (connect engine to clutch) for D7 and D8, $50; Jim Ronsse nnn-nnn-nnnn (Chicago Park CA)
Caterpillar Traxcavator, has a cracked block, has all right parts, and was running good, $4800; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)
Cletrac W radiator, $300. Head $250; Buck Evans nnn-nnn-nnnn (Greenville IL)
Combine parts: John Deere 36 parts. International 915 parts. Holt bean header, $150. JD 36 bean header, $150. JD 36 grain header, $150; Harry Lindahl nnn-nnn-nnnn no messages (Richvale CA)
Eisemann, GV4 mag with all covers on back stuck, $300 ea, 3 available; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Eismann D2-D4 pony mag, $150; James Zimmerman nnn-nnn-nnnn (Wheeling MO)
Farmall 450D with extra parts tractor, chassis and sheet metal, $1200 obo; Dave Ruhland nnn-nnn-nnnn (Garden Grove CA)
Farmall 460 cylinder head, came from 6 cylinder, 236 cubic inch diesel engine, $180 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Farmall B, 1947, hi crop conversion kit, passenger seat all factory parts except seat cushion. All it needs is paint. Too many new parts to list. Made in Louisville. $2475; Roger Lepage nnn-nnn-nnnn (Redding CA)
Farmall BN, 1942, rebuilt engine, custom wide seat, $3500; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)
Farmall C, 1950, wide front, very good running original shape non restored tractor, fairly decent sheet metal, good rear tires, does need one front tire, $1100; Tim Morris nnn-nnn-nnnn
Farmall Cub, 1948, easy start, good driver, good appearance, good tires, $2500; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)
Farmall Cub, 1948, front and rear weights, removed gas tank and radiator to clean, have gaskets to reassemble, tires in good condition, running prior to disassembly, includes Operator’s and Service manual and parts catalog, $1600 obo; Dale nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall sheet metal from A to 450, plus misc parts. Super M motor stuck, missing heads, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super AV, 1948, high crop, parade quality, excellent rubber, $4500; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)
Farmall Super C, wide front, Fast Hitch, 2 sets rear weights, has case loader on it, recent paint and nice decals, great rubber, runs excellent; Al Barkl nnn-nnn-nnnn (Elko NV)
Farmall Super C, with 8-foot belly mounted grader blade, utility box, new tires, chains for rear tires, always garaged, $2750 obo; Bill Littlefield nnn-nnn-nnnn (Eagle Point OR)
Ferguson TO-30, runs good, lift works but does not hold, $1200 obo; Wes Allen nnn-nnn-nnnn or xxxx@xxxx.xxx (Live Oak CA)
Ford 800, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 800, excellent engine, with a squeal in reverse, $3000 as is; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 8N, 1947, installed number of options for that era, missing scalloped wheel hubs, swinging drawbar, 12 volt system, 9N/2N front wheels, does have a 4 speed transmission, engine has .090 over high dome power pistons, 4 ring, complete machine shop engine rebuild, new clutch, pressure plate and throw out bearing. Have a set of track lites planned to install and a rebuilt Sherman step up transmission can go with tractor, not yet installed, new tires, new paint, $5500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 8N, pictures on request, $3500; W. VanGundy nnn-nnn-nnnn (Cottonwood CA)
Ford 9N/2N tractors, 2 available in parts, would sell all extra parts with the deal. Have many NOS Ford tractor parts and pieces, too many parts to list, $2000; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford Ferguson BNO-40, airplane tug, parts, have various parts: engine block, transmission, front axle with radius rods, fuel tank, fairly complete chassis and sub frame with front grille. Cash or trade, all or part; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ford NAA, 1953, 6 volt, good running tractor, $3200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford NAA, 1954, with one arm loader, was running but miss on one cylinder, now seems valves are stuck open, balance of tractor in good condition, $2700; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Fordson N, 1936, British, excellent steel spade lug rear wheels, heavy cast iron front wheels, very good fenders, engine is out of tractor and needs overhaul, $300; John Lang nnn-nnn-nnnn (Monmouth OR)
Fordson, 1935, rear wheel pads are similar to a track layer, completely original, has not run for several years but does turn over, $1000, pictures on request; Nick nnn-nnn-nnnn (Seabeck WA)
Gibson D, SN D-5379, front blade, spring tooth harrow, good tires, original gas tank and engine. A little TLC and it should run, $750; Dale nnn-nnn-nnnn (Auburn CA)
Harris Power Horse, 4-wheel drive, $3500 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International 340 Utility, good running original working condition tractor, sheet metal, tires and wheels are good, has working TA and two point hitch, $3500, can send pictures; Dan Tombrink nnn-nnn-nnnn or xxxx@xxxx.xxx (Columbia Falls MT)
International 350 Hi Utility, fast hitch, 1 remote, runs, needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 460 Utility, 282 cubic inch diesel engine, $1530 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International B275-B414 tractor parts: cylinder head, transmission/rear end gears, hydraulic parts and much more; John Lang nnn-nnn-nnnn (Monmouth OR)
International Cub, 1966, industrial, $750; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
International T6 dozer, angled blade, $2000; Don Chappell nnn-nnn-nnnn (St. Helens OR)
International TD18A, cracked block and stuck, pins and bushings like new, best offer; Warren Berg nnn-nnn-nnnn (North Highlands CA)
John Deere 1010 utility, SN 56651, runs good, low mounted headlights, underneath exhaust, nice hood, newer rear tires, power steering, gas, 1 hydraulic remote, $5000 obo; David nnn-nnn-nnnn (Spokane WA)
John Deere 40U, 1955, lights, 3pt, repaint, new tires, $4500; Kent nnn-nnn-nnnn (McCleary WA)
John Deere 420 utility, SN 80652, early production, paint is all green without yellow stripe, runs good, good sheet metal, $4000 obo; David nnn-nnn-nnnn (Spokane WA)
John Deere 420HC, 1957, restored, powder coated front wheels with new Firestone tires, new wiring, gauges, hoses, belts, seat, lights, engine bored. Has both standard exhaust manifold and new muffler and orchard manifold and new muffler (so it can fit in shop), 5 speed and has PTO, have front weights if interested, make offer. Also have new equipment trailer to be sold separately or with the tractor for extra $. Cost $3200 with toolbox, winch, remote control customizations and battery. Will not be needed after tractor sells; Allen Avery nnn-nnn-nnnn (Antelope CA)
John Deere 420S, SN 83698, restored in 2003, runs well, 3pt, 540 PTO, drawbar, also have 3pt JD Killefer disc, #414A-04. $1800; Don Clark nnn-nnn-nnnn (Creston CA)
John Deere 420W, starts easily, runs and drives well, very good mechanical condition, sheet metal, transmission, wheels and tires all very good. Hydraulics, 3pt, and PTO work as they should. Engine was overhauled about 10 years ago and tractor has about 150 hours since then. Big bonus of factory power steering, making it easy to drive, $3800; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 430 utility, runs good, power steering, 1 hydraulic remote, only built 1340 430 utilities, $4500; David nnn-nnn-nnnn (Spokane WA)
John Deere 50 and 60 parted out, lots left: crank, head, grille, hood, misc parts. JD MT fenders and brackets, $100. JD 26 inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30 inch wheel cast centers part# F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere 50, 1954, decent tires, good tin, painted about 10 years ago, runs great, $2000; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)
John Deere 520, 1958, original paint, 3pt, good tires, runs good, 3 sets of weights on rear, $4500; Kent nnn-nnn-nnnn (McCleary WA)
John Deere 530, SN 5301913, original condition, 2 hydraulic remotes, 540 PTO, 3pt, drawbar, have belly mounted cultivator, runs well, $1500; Don Clark nnn-nnn-nnnn (Creston CA)
John Deere 60, narrow front with Roll-o-Matic, 42-inch rear wheels, $1800; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 630, 3500 hours, Roll-O-Matic, power steering, original 3pt hitch with original top link, good tires, straight sheet metal, starts and runs great, does not use oil. New manifold set two years ago. Includes a #45 loader with all hydraulics rebuilt, converted to hydraulic dump. $4500; Jim Temple nnn-nnn-nnnn (Noti OR)
John Deere 820 black dash, runs, big fenders, foot throttle, dual hydraulics, fair overall, $5500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A, 1943, SN 5211850, hand start, Roll-O-Matic, good older tires, $2500; Henry Geschwill nnn-nnn-nnnn (Salem OR)
John Deere A, Johnny Popper, good tires, needs a new battery, runs good, $2500 obo, can email photos if interested; Carol nnn-nnn-nnnn (Keno OR)
John Deere AN, 1949, new radiator, ran when parked, fair rubber, good tin, $1800; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)
John Deere AOS reproduction hood, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)
John Deere AR, $1900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere AW high clearance, 1950, starts easily, runs and drives well, in good mechanical condition. Sheet metal is fair, rear tires are 12.4-42 in excellent condition, hydraulics and PTO work as they should, tractor used at many plow days to pull JD plow, $2700, email for photos; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere B, $2750; Don Chappell nnn-nnn-nnnn (St. Helens OR)
John Deere B: convert styled B from tricycle front end to factory correct wide front end. Have both earlier style with A1100R axle ($1095 includes pedestal) and later round tube style ($995 w/o pedestal, but they are available). Pickup here or ship truck freight, email for photos; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere BN, 1946, good rear tires 90%, single front, carb is missing, hood is good, engine turns over, grille not so good, $350; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn do not leave message (Chehalis WA)
John Deere BN, mid 40s, unrestored, good sheet metal, electric start, 6 speed, complete except missing mag, good rubber, no tag, $1400 obo. Same vintage BW with very good sheet metal, hand start, tag unreadable, on cutoff rims, missing carb, $1000 obo; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)
John Deere BR, 1936, sheet metal is new: shutters, hood, fenders and floor pan, new front tires, rear tires have good tread but are weather checked, engine is stuck, tractor has been sitting for a while after being restored, $1250; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn do not leave message (Chehalis WA)
John Deere BWH tractors, 1945 and 1946, both on spoke rear wheels, rough but the real thing with confirmed serial number research documents, $2400 each or both for $4000, email for photos; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere D fenders for a 1942, $400; Henry Geschwill nnn-nnn-nnnn (Salem OR)
John Deere D, $1000; Don Chappell nnn-nnn-nnnn (St. Helens OR)
John Deere D, 1927, in dry storage for 10 years, not stuck, comes with steel lugs and extension rims, $3000, pictures on request; Nick nnn-nnn-nnnn (Seabeck WA)
John Deere D, 1928, SN 58393, complete, ran when parked, on steel lug rums, $1600; Bob nnn-nnn-nnnn (San Martin CA)
John Deere D, 1946, very nice, easy start, easy drive, $4000; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)
John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere D, 1948, runs and drives, rubber is fair, missing fenders and some hardware, good for restoration or parts, $1200; Tim Morris nnn-nnn-nnnn (Browns Valley CA)
John Deere G, 1938, unstyled, original condition, ran well when parked, $3500; Dave nnn-nnn-nnnn (Aurora OR)
John Deere LA, 1941-1946 (missing tag), needs assembly, engine overhauled, radiator and gas tank cleaned. Gaskets and all parts complete for assembly. Tires in good condition, engine excited to run again. Will include Operator’s, Shop and Parts manual, $1800 obo; Dale nnn-nnn-nnnn or xxxx@xxxx.xxx (Auburn CA)
John Deere M, 1951, good rear tires, very good original condition, complete, starts easily, runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2600, email for photos or video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere MC or 40 tracks, $750; Don Chappell nnn-nnn-nnnn (St. Helens OR)
John Deere MT with two row cultivator, $2500; Dave Gallant nnn-nnn-nnnn (Boring OR)
John Deere MT(W), 1952, good tin, fair rubber, 3pt, parade seat, $2000; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)
John Deere R, 1953, nicely restored, new tires, nice paint. Ran it last three years in parades. Strong runner, to use or show, $6000. May deliver for price; Dan nnn-nnn-nnnn or cell nnn-nnn-nnnn (Lander WY)
John Deere tractors: JD B, 1939, engine stuck, barn find, straight tin, decent tires, $1000. JD AW, 1948, 42 inch rear wheels and high clearance wide front, bored 45 over, great running tractor, used to be used in the hay, but idle for a few years, $2500. JD B, 1948, Roll-O-Matic front, running tractor, $1000. JD D, 1936, round spoke rear wheels, tractor is loose, should run, $2500; Chris Carl nnn-nnn-nnnn or xxxx@xxxx.xxx (Stanwood WA)
Massey Ferguson 65 gas, good engine, etc; Buck Evans nnn-nnn-nnnn (Greenville IL)
Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
McCormick 10-20, SN KC171397, engine turns over, Kay Bruiner wheels, front tires are ok with no checks, rear tires to be mounted are period tread and are good, hood and side panels are good, fenders in need of repair, $525; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn do not leave message (Chehalis WA)
McCormick 40 series air cleaner, complete, $100; Buck Evans nnn-nnn-nnnn (Greenville IL)
McCormick Deering I-4, turns over, good shape, $950. O-4, runs, missing orchard sheet metal, $1000. O-4, very early motor, stuck, missing orchard sheet metal. O-4 parting out: orchard belt pulley, shutters, plus misc. Rare ODS-6s orchard diesel engine free and 1 parts tractor, both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering OS4, 1948, parade quality, very good tires, $3000; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)
McCormick Deering OS4, very straight hood, fenders and grille, engine loose, not running, good rims, needs tires, $750 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Minneapolis Moline 335 Industrial, 1960, has Ottawa loader, stuck engine, rare tractor, one of 306 built. Needs restoration or for parts, can send pictures, $1900; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals, rear main seal leak, can send pictures, $3450; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline GVI, 1960, diesel, 68 hp, 540 PTO, 23.1-26 rears, 7.5-18 fronts, cab with all glass, good sheet metal, 2 remotes, with 9 foot Cancade hydraulic two way front blade, will sell with or without blade. Blade available separately. Can send pictures, $3900 with blade; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UT-100D, 1946, restorable or for parts, never had it running, can send pictures, $1250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline Z parts tractor, can send pictures, $250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Multiple tractors, will sell individually or as a lot. Avery A, wide front. Wards Twin row crop front. Minneapolis Moline BF wide front. Engines are stuck, some new front tires, tractors are virtually complete, need restoring; Garland Goesch nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Townsend WA)
Oliver 80, Wheatland, $1400; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)