December 2018 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, 1939, parade quality, you won’t be disappointed, $2500; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

Allis Chalmers G $5000; Lou Ward nnn-nnn-nnnn (Brush Prairie WA)

Allis Chalmers G, has rebuilt motor, tires fair, $2000; Vern Fought nnn-nnn-nnnn (Exeter CA)

Allis Chalmers IBs, two tractors, one mainly for parts, other is restorable, take them both for $500; Zack Peterson nnn-nnn-nnnn or xxxx@xxxx.xxx (Corvallis OR)

Avery V, 1947, runs well, some noise in the transmission, tin is great, like new tires, new lights, new wire harness, new muffler, $2500; Roger Hahn nnn-nnn-nnnn or xxxx@xxxx.xxx (Glendora CA)

Case 18-32 Crossmotor, 1925, nice complete straight tractor with fender extensions on the furrow side. Engine is seized and like most of them, it needs an exhaust manifold. This would be a great tractor to restore or leave it in its work clothes. Doesn’t look like to have been abused during its working life and should be easy to get running again. $3750, open to offers and/or interesting trades; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Case 25-45 Crossmotor, 1929, these are beautiful old work horses with lots of grunt. Engine runs well, older restoration and is show ready as is or tidy it up with a cosmetic restoration. Currently on rubber bolted to the steel, but have original bands and grousers. Don’t miss your chance to get into one of these big cross motors as they don’t come up for sale often. $19500, open to offers and/or interesting trades; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Case 450 dozer, 6-way blade with rippers, like new undercarriage, good paint, rebuilt lower end with 10-10 crank and new rods, mains, seals and gaskets, very fine dozer, $14000 obo some trade possible; Don Chappell nnn-nnn-nnnn (St Helens OR)

Case C, 1937, runs, last shown at the 2018 Branch 245 show, $1800, pictures on request; Nick nnn-nnn-nnnn (Seabeck WA)

Case C, D and S, have runners and parts tractors; Dave Ruhland nnn-nnn-nnnn (Garden Grove CA)

Case CO, 1929, very good restoration project, on cut offs, engine loose, not running, $500; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Case SC, 1948, narrow front end, restored 20 years ago, barn stored, runs great, $1800 obo; Carole Smith nnn-nnn-nnnn (Dayton NV)

Case VAC, 1951, wide adjustable front axle with Eagle hitch, new rear tires, straight sheet metal, running tractor, $650; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Case VAH, 1947, wide front, complete, 1 new rear tire 9x36, engine stuck, leave message, $800; David Ruark nnn-nnn-nnnn (Pomeroy WA)

Case VAI, parts tractor or restore, $250; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Case wide tread, 1936, comes with full set of steel and rubber wheels, $3300 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)

Caterpillar 22s, three total, have had all running, negotiable; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)

Caterpillar 30 exhaust manifold, late style, nice $350; James nnn-nnn-nnnn (Wheeling MO)

Caterpillar carburetors: 10 carburetor bodies only, $250 each. 30 carburetors for SN S-6369 - S6847, PS2370-PS3582, $450. 50 gas carburetor, early style, $800; James nnn-nnn-nnnn (Wheeling MO)

Caterpillar D2 for parts, without blade, fairly complete, $2200; Carol nnn-nnn-nnnn (Keno OR)

Caterpillar D2 with blade, nice condition, $7000; Carol nnn-nnn-nnnn (Keno OR)

Caterpillar D2, 5J series, wide gauge, runs good, hydraulic dozer blade, unknown brand, undercarriage fair, $2500; Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2s, both were dad’s, so don’t know much about them, one was being rebuilt and one for parts. He passed away just as he was to start pouring the babbit bearings, so both are a basket case, tracks are good and clutches apparently work. A 15 hp motor was put on the back so they could be moved around. Call or text; Rob Scott nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)

Caterpillar D2s: 5J9817 Traxcavator. 5J9572 track crawler. 5U13624 orchard parts. J185 with blade, buy them all, all need work, $4800; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)

Caterpillar Traxcavator, has a cracked block, has all right parts, and was running good, $4800; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)

Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Farmall 450D with extra parts tractor, chassis and sheet metal, $1200 obo; Dave Ruhland nnn-nnn-nnnn (Garden Grove CA)

Farmall BN, 1942, rebuilt engine, custom wide seat, $3500; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

Farmall C, 1950, wide front, very good running original shape non restored tractor, fairly decent sheet metal, good rear tires, does need one front tire, $1100; Tim Morris nnn-nnn-nnnn

Farmall Cub, 1948, easy start, good driver, good appearance, good tires, $2500; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

Farmall M, tall tractor, gas, has gear type drop boxes and 20 inch single front, aftermarket wide front also available, engine now running, stored inside, good sheet metal, usable tires, make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)

Farmall MD, runs well, good rubber, has live hydraulics, belt pulley, Behlen power steering, sheet metal is good, $2750; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)

Farmall parts for Cub, A, B, C, H and M; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall Super AV, 1948, high crop, parade quality, excellent rubber, $4500; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

Farmall Super C, good original condition with strong engine and good sheet metal, includes both narrow and wide front axles, has aftermarket cultivator frames front and rear, $2000; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)

Ford 800, excellent engine, with a squeal in reverse, $3000 as is; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, 1947, installed number of options for that era, meaning scalloped wheel hubs will work, swinging drawbar, 12 volt system, 9N/2N front wheels, does have a 4 speed transmission, engine has .090 over high dome power pistons, 4 ring, complete machine shop engine rebuild, new clutch, pressure plate and throw out bearing. Have a set of track lites planned to install and a rebuilt Sherman step up transmission can go with tractor, not yet installed, new tires, new paint, $5500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N, pictures on request, $3500; W. VanGundy nnn-nnn-nnnn (Cottonwood CA)

Ford 8N, real nice tractor, Sherman transmission, good tires, $2800; Pat Ridders nnn-nnn-nnnn (Albany OR)

Ford 9N/2N tractors, 2 available in parts, would sell all extra parts with the deal. Have many NOS Ford tractor parts and pieces, too many parts to list, $2000; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford Ferguson BNO-40, airplane tug, parts, have various parts: engine block, transmission, front axle with radius rods, fuel tank, fairly complete chassis and sub frame with front grille. Cash or trade, all or part; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Ford NAA, 1953, 6 volt, good running tractor, $3200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford NAA, 1954, with one arm loader, was running but miss on one cylinder, now seems valves are stuck open, balance of tractor in good condition, $2700; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Fordson, 1935, rear wheel pads are similar to a track layer, completely original, has not run for several years but does turn over, $1000, pictures on request; Nick nnn-nnn-nnnn (Seabeck WA)

Fordson, English, steel wheels, $500; Lou Ward nnn-nnn-nnnn (Brush Prairie WA)

Hercules IXB5 engine with clutch and starter, $200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

International 135 engine, has clutch, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

International 424, 1964, decent tires, good bones, engine stuck, 3pt, 8 speed, generator missing, part out or restore, you haul, $450; Frank nnn-nnn-nnnn (Manning OR)

International Cub, 1966, industrial, $750; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Farmall Cub, belt pulley, good rubber, excellent tin, has hydraulics, runs very well, ready for paint, $2750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)

International T6 gas cat with angled blade, runs very well, main clutch stuck, same as TD6 but is gas not diesel, $1650 obo; Don Chappell nnn-nnn-nnnn (St. Helens OR)

International TD18A, cracked block and stuck, pins and bushings like new, best offer; Warren Berg nnn-nnn-nnnn (North Highlands CA)

John Deere 1010 utility, SN 56651, runs good, low mounted headlights, underneath exhaust, nice hood, newer rear tires, power steering, gas, 1 hydraulic remote, $5000 obo; David nnn-nnn-nnnn (Spokane WA)

John Deere 2630 Utility with full orchard fenders, 70 hp, eight speed, working hydraulics, 3pt hitch, and PTO. No longer farming, so I don't need it anymore, $4500. Email for photos and You tube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)

John Deere 40U, 1955, lights, 3pt, repaint, new tires, $4500; Kent nnn-nnn-nnnn (McCleary WA)

John Deere 40U, parting out, bad engine, no tires, would like to sell whole or parts, call for information; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

John Deere 420 utility, SN 80652, early production, paint is all green without yellow stripe, runs good, good sheet metal, $4000 obo; David nnn-nnn-nnnn (Spokane WA)

John Deere 420HC, 1957, restored, powder coated front wheels with new Firestone tires, new wiring, gauges, hoses, belts, seat, lights, engine bored. Has both standard exhaust manifold and new muffler and orchard manifold and new muffler (so it can fit in shop), 5 speed and has PTO, have front weights if interested, make offer. Also have new equipment trailer to be sold separately or with the tractor for extra $. Cost $3200 with toolbox, winch, remote control customizations and battery. Will not be needed after tractor sells; Allen Avery nnn-nnn-nnnn (Antelope CA)

John Deere 420S, SN 83698, restored in 2003, runs well, 3pt, 540 PTO, drawbar, also have 3pt JD Killefer disc, #414A-04. $1800; Don Clark nnn-nnn-nnnn (Creston CA)

John Deere 420W, starts easily, runs and drives well, very good mechanical condition, sheet metal, transmission, wheels and tires all very good. Hydraulics, 3pt, and PTO work as they should. Engine was overhauled about 10 years ago and tractor has about 150 hours since then. Big bonus of factory power steering, making it easy to drive, $3800; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 430 utility, runs good, power steering, 1 hydraulic remote, only built 1340 430 utilities, $4500; David nnn-nnn-nnnn (Spokane WA)

John Deere 50, 1954, decent tires, good tin, painted about 10 years ago, runs great, $2000; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

John Deere 520, 1958, original paint, 3pt, good tires, runs good, 3 sets of weights on rear, $4500; Kent nnn-nnn-nnnn (McCleary WA)

John Deere 530, SN 5301913, original condition, 2 hydraulic remotes, 540 PTO, 3pt, drawbar, have belly mounted cultivator, runs well, $1500; Don Clark nnn-nnn-nnnn (Creston CA)

John Deere 720 diesel, runs good, pony start, wide front, good tires, $6000; Pat Ridders nnn-nnn-nnnn (Albany OR)

John Deere 80, both engines run very well, tin is in good shape, can email photos, only 3500 of these so getting hard to find, excellent for a pulling tractor or full restoration, $8500 or will take a 4020, 4030 etc. in trade; Jerry Nash nnn-nnn-nnnn or xxxx@xxxx.xxx (Bridger MT)

John Deere A hydraulic pump, fits behind magneto or distributor, $100; Pat Ridders nnn-nnn-nnnn (Albany OR)

John Deere A, Johnny Popper, good tires, needs a new battery, runs good, $2500 obo, can email photos if interested; Carol nnn-nnn-nnnn (Keno OR)

John Deere AN, 1949, new radiator, ran when parked, fair rubber, good tin, $1800; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

John Deere AO, styled, good shape, hydraulic pump with remote, wide front, fair tires, $2300; Pat Ridders nnn-nnn-nnnn (Albany OR)

John Deere AOS reproduction hood, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere AOS Streamline, unrestored and runs, only 800 made, $6000. Email for photos and You tube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)

John Deere AR, 1946, electric start with lighting package, really nice straight tractor, engine is loose, easy to get running again, excellent for restoration or leave in working clothes, $1700, open to offers and/or interesting trades; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

John Deere AW high clearance, 1950, starts easily and runs and drives well and is in good mechanical condition. The sheet metal is fair. The rear tires are 12.4-42 in excellent condition. The hydraulics and PTO work well as they should. Tractor used at many of our plow days to pull a John Deere plow, $2500. Email for photos, Youtube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)

John Deere AW high clearance, 1950, starts easily, runs and drives well, in good mechanical condition. Sheet metal is fair, rear tires are 12.4-42 in excellent condition, hydraulics and PTO work as they should, tractor used at many plow days to pull JD plow, $2700, email for photos; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere B: convert styled B from tricycle front end to factory correct wide front end. Have both earlier style with A1100R axle ($1095 includes pedestal) and later round tube style ($995 w/o pedestal, but they are available). Pickup here or ship truck freight, email for photos; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere B: Convert your styled B from tricycle front end to factory correct wide front end. I have both the earlier style with A1100R axle ($1095 includes pedestal) and the later round tube style ($995 without pedestal, but they are available). Pick up here or can ship truck freight. Email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)

John Deere BN, 1946, good rear tires 90%, single front, carb is missing, hood is good, engine turns over, grille not so good, $350; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn do not leave message (Chehalis WA)

John Deere BR, 1936, sheet metal is new shutters, hood, fenders and floor pan, new front tires, rear tires have good tread but are weather checked, engine is stuck, tractor has been sitting for a while after being restored, $1250; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn do not leave message (Chehalis WA)

John Deere BWH tractors, 1945 and 1946, both on spoke rear wheels. Rough but the real thing with confirmed serial number search documents. $2000 each or both for $3600. Email for photos, Youtube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)

John Deere BWH tractors, 1945 and 1946, both on spoke rear wheels, rough but the real thing with confirmed serial number research documents, $2400 each or both for $4000, email for photos; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere D, $975; Don Chappell nnn-nnn-nnnn (St. Helens OR)

John Deere D, 1927, in dry storage for 10 years, not stuck, comes with steel lugs and extension rims, $3000, pictures on request; Nick nnn-nnn-nnnn (Seabeck WA)

John Deere D, 1928, SN 58393, complete, ran when parked, on steel lug rums, $1600; Bob nnn-nnn-nnnn (San Martin CA)

John Deere D, 1946, very nice, easy start, easy drive, $4000; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

John Deere D, 1948, runs and drives, rubber is fair, missing fenders and some hardware, good for restoration or parts, $1200; Tim Morris nnn-nnn-nnnn (Browns Valley CA)

John Deere gears and other miscellaneous parts for crawlers, bottom housings pan, bull gears, rollers, several drive shafts, various engine parts, distributor, manifolds, lots of miscellaneous items; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere M, 1951, good rear tires, very good original condition, complete, starts easily, and runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2500. Email for photos, Youtube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)

John Deere Model 420W, starts easily and runs and drives well. In very good mechanical condition. The sheet metal, transmission, wheels and tires are all very good. The hydraulics, 3pt hitch, and PTO work well as they should. The engine was overhauled about ten years ago and the tractor has had about 150 hours on it since then. One big bonus is the factory power steering that makes this a very easy tractor to drive. $3800. Email for photos and You tube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)

John Deere MT with two row cultivator, $2500; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere MT(W), 1952, good tin, fair rubber, 3pt, parade seat, $2000; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

John Deere R, 1953, nicely restored, new tires, nice paint. Ran it last three years in parades. Strong runner, to use or show, $6000. May deliver for price; Dan nnn-nnn-nnnn or cell nnn-nnn-nnnn (Lander WY)

Magnetos and starters for Oliver OC3 and Cleatrac HG crawlers, various conditions of both, some were rebuilt years ago and stored, others just cores, $75 to $225 each depending on condition; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Massey Pony, mostly complete, been sitting for years, motor turns over, sheet metal is nice, has PTO, would make a great restoration, will need tires, $1500 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

McCormick 10-20, SN KC171397, engine turns over, Kay Bruiner wheels, front tires are ok with no checks, rear tires to be mounted are period tread and are good, hood and side panels are good, fenders in need of repair, $525; Warren Roberts nnn-nnn-nnnn or nnn-nnn-nnnn do not leave message (Chehalis WA)

McCormick Deering OS4, 1948, parade quality, very good tires, $3000; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

McCormick Deering OS4, very straight hood, fenders and grille, engine loose, not running, good rims, needs tires, $750 obo; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)

Minneapolis Moline 335 Industrial, 1960, has Ottawa loader, stuck engine, rare tractor, one of 306 built. Needs restoration or for parts, can send pictures, $1900; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals, rear main seal leak, can send pictures, $3450; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline GVI, 1960, diesel, 68 hp, 540 PTO, 23.1-26 rears, 7.5-18 fronts, cab with all glass, good sheet metal, 2 remotes, with 9 foot Cancade hydraulic two way front blade, will sell with or without blade. Blade available separately. Can send pictures, $3900 with blade; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline UT-100D, 1946, restorable or for parts, never had it running, can send pictures, $1250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline Z parts tractor, can send pictures, $250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Oliver 77 row crop, 1949, narrow front end, ran when parked, unrestored, make reasonable offer; Carole Smith nnn-nnn-nnnn (Dayton NV)

Oliver 88 row crop, Wheatland factory wide front, restored 8 years ago, runs great, has all rare Wheatland sheet metal, like new tires, 3 sets of rear wheel weights, front tires are new, stored inside, rare tractor, purchased from original owner, rear fender extensions, haven’t seen one like this around; Ron Hunter nnn-nnn-nnnn or xxxx@xxxx.xxx (Puyallup WA)

Oliver factory rear steps for 66-880 tractors, axle mount, nice shape; Ron Hunter nnn-nnn-nnnn or xxxx@xxxx.xxx (Puyallup WA)

Oliver OC3 and Cleatrac HG sheet metal, original hood $150. Grille with side screens, $350. Fenders $100 for the pair. Lots of other miscellaneous parts, bull gears, generator, etc. Like to sell all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Oliver Super 66 diesel, 1955, wide front, rear tires are usable, one rear rim needs repair, sheet metal almost perfect, tractor needs to be restored, have tractor build card, been kept under cover, runs but not well, less than 200 made in 1955, can send pictures; Ron Hunter nnn-nnn-nnnn or xxxx@xxxx.xxx (Puyallup WA)

Oliver Super 88, diesel, wide front, runs great, injection pump was removed and gone through along with injectors, tractor is disassembled to restore, have build card, one of the last 200 made, if not sold complete, then might part out, sheet metal, grille, are almost perfect, great restoration project; Ron Hunter nnn-nnn-nnnn or xxxx@xxxx.xxx (Puyallup WA)

Rumley Oil Pull 20-40 G, 1923, excellent project tractor, engine is loose, has good pinion gears, but bull gears will need to be replaced, transmission has damage but comes with a spare, $19500, open to offers and/or interesting trades; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)

Sherman step up/step down transmission for Ford 8N and similar tractors, included is adapter plate and separate pilot shaft to assist on alignment, update 4 speed standard transmission to create 12 forward and 3 reverse speeds, $480; Ray Dias nnn-nnn-nnnn (Hughson CA)

Tires, 11.25x24 rear combine tires, good condition, highway tread, $50 each; David Ruark nnn-nnn-nnnn (Pomeroy WA)

Tires, 9.5x24, not matched, one like new and the other really good, with tubes, $200 obo; Dave Ruhland nnn-nnn-nnnn (Garden Grove CA)

Tires, pair of hard to find size of Maxi Trac 7.5-24, tires are about 30 years old and never used, been stored in a barn all these years, looks to be for a Gibson or similar, great for a restoration job, like new, $300; Joe Giordano or xxxx@xxxx.xxx nnn-nnn-nnnn (Port Orchard WA)

Tires: two 16.9x26 unmatched decent shape, 50% plus tread, $100; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Trail Beetle Mini Crawler bulldozer, very rare, built by Western Gear Works of Seattle in the 1940s, comes with blade and copy of original manual, total restoration project, motor is stuck, tracks not bad, sprockets are worn, exhaust manifold will need to be replaced or rebuilt, selling as is, make reasonable offer, very rare machine, can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Wheel weights, fit 16 in wheels, 2 halves per wheel, $50 per half; J.H. Keith nnn-nnn-nnnn (Hermiston OR)