Allis Chalmers C, parts tractor, complete, $200; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Allis Chalmers G $5000; Lou Ward nnn-nnn-nnnn (Brush Prairie WA)
Case 18-32 Crossmotor, 1925, nice complete straight tractor with fender extensions on the furrow side. Engine is seized and like most of them, it needs an exhaust manifold. This would be a great tractor to restore or leave it in its work clothes. Doesn’t look like to have been abused during its working life and should be easy to get running again. $3750, open to offers and/or interesting trades; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
Case 25-45 Crossmotor, 1929, these are beautiful old work horses with lots of grunt. Engine runs well, older restoration and is show ready as is or tidy it up with a cosmetic restoration. Currently on rubber bolted to the steel but have original bands and grousers. Don’t miss your chance to get into one of these big cross motors as they don’t come up for sale often. $19500, open to offers and/or interesting trades; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
Case C, S or R F&H HC245 rear round spoke wheels 9x24, $300. Case C S D parts, Case DC-4 with heart shaped front end, hand clutch, live PTO, hydraulic and eagle hitch, runs, need some tinkering, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case SC, 1948, narrow front end, restored 20 years ago, barn stored, runs great, $1800 obo; Carole Smith nnn-nnn-nnnn (Dayton NV)
Case VAH, 1947, wide front, complete, 1 new rear tire 9x36, engine stuck, leave message, $800; David Ruark nnn-nnn-nnnn (Pomeroy WA)
Case wide tread, 1936, comes with full set of steel and rubber wheels, $3300 obo; Dave Gallant nnn-nnn-nnnn (Boring OR)
Caterpillar 22 1J WSP wide pad runs and drives, needs valve job, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Caterpillar 30 exhaust manifold, late style, nice $350; James nnn-nnn-nnnn (Wheeling MO)
Caterpillar carburetors: 10 carburetor bodies only, $250 each. 30 carburetors for SN S-6369 - S6847, PS2370-PS3582, $450. 50 gas carburetor, early style, $800; James nnn-nnn-nnnn (Wheeling MO)
Caterpillar D2 for parts, without blade, fairly complete, $2200; Carol nnn-nnn-nnnn (Keno OR)
Caterpillar D2 with blade, nice condition, $7000; Carol nnn-nnn-nnnn (Keno OR)
Caterpillar D2, 5J series, wide gauge, runs good, hydraulic dozer blade, unknown brand, undercarriage fair, $2500; Kim Kestler nnn-nnn-nnnn (Reno NV)
Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Farmall 460-cylinder head, came from 6-cylinder, 236 cubic inch diesel engine, $180 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Farmall A, sickle bar mower, $1000; Jim McCracken nnn-nnn-nnnn (Crawfordsville OR)
Farmall Cub, belt pulley, good rubber, excellent tin, has hydraulics, runs very well, ready for paint, $2750 obo; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall H, 1946, runs good, new transmission, wide front, extra long rear axles, $2000; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Farmall M, 1947, restored, narrow front, new rear tires, front tires good, everything works, new paint. Tractor has been in the Timmerman family in Powell Butte OR since 1947. $3500 obo; Dennis nnn-nnn-nnnn (Powell Butte OR)
Farmall M, tall tractor, gas, has gear type drop boxes and 20-inch single front, aftermarket wide front also available, engine now running, stored inside, good sheet metal, usable tires, make a good parade tractor, $1200; John LaBoyteaux nnn-nnn-nnnn (Upper Lake CA)
Farmall MD MDCH with Swartz wide front and 3pt hitch, SN FDBK261846X20C, $1200; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Farmall MD, runs well, good rubber, has live hydraulics, belt pulley, Behlen power steering, sheet metal is good, $2750; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Farmall parts for Cub, A, B, C, H and M; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall sheet metal from A to 450, plus misc. parts. Super M motor stuck, missing heads, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super C, 1954, 2pt Fast Hitch, comes with C-20 2-14 Fast Hitch plow, IH Windbreaker drawbar, IH umbrella; Al Barkl nnn-nnn-nnnn (Twin Falls ID)
Farmall Super C, good original condition with strong engine and good sheet metal, includes both narrow and wide front axles, has aftermarket cultivator frames front and rear, $2000; John LaBoyteaux nnn-nnn-nnnn (Redcrest CA)
Ford 4000, 1962, wide front, power steering, 4-cylinder gas, has good tires on spinouts, $2000; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Ford 800, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Ford 8N, real nice tractor, Sherman transmission, good tires, $2800; Pat Ridders nnn-nnn-nnnn (Albany OR)
Ford 8N, with bucket, needs work, $1000; Jim McCracken nnn-nnn-nnnn (Crawfordsville OR)
Ford N series orchard sheet metal, useable, $1200; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Fordson, English, steel wheels, $500; Lou Ward nnn-nnn-nnnn (Brush Prairie WA)
Harris Power Horse, 4-wheel drive, $3500 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Hercules IXB5 engine with clutch and starter, $200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
International 135 engine, has clutch, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
International 350 Hi Utility, fast hitch, 1 remote, runs, needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 424, 1964, decent tires, good bones, engine stuck, 3pt, 8 speed, generator missing, part out or restore, you haul, $450; Frank nnn-nnn-nnnn (Manning OR)
International 460 Utility, 282 cubic inch diesel engine, $1530 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
International Hough Payloader, unknown model, appears to have a Chevrolet 6 cylinder repower engine, has not run for some time, appears to be complete, good for parts or restoration, tires are round and black, one new tire included (was stored inside), bucket size 1-2 yards?, looks standard, will load on your trailer, $499, email for more photos or questions; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)
John Deere 40U and 40S, unrestored, in shed with fair sheet metal, open to offer; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)
John Deere 40U, parting out, bad engine, no tires, would like to sell whole or parts, call for information; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
John Deere 420T, 1958, very nice running tractor, very good sheet metal, new front tire, tires are weathered but very usable, tractor has 3pt lift, but missing the arms, great parade tractor, $1950; Tim Morris nnn-nnn-nnnn (Napa CA)
John Deere 5 roller crawler dozer with Braden PTO driven winch, winch is quiet and operates well, nice heavy brush rake, undercarriage is very good, has canopy, oil pressure very good, starts, runs and drives out very nice, steers good both ways, one of the nicest originals I’ve seen, $5500 firm; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 50, new engine, new radiator, all sheet metal, $2500; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
John Deere 60, narrow front with Roll-o-Matic, 42-inch rear wheels, $1800; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere 60, Roll-o-Matic, new grille, complete, $1800; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
John Deere 720 diesel, runs good, pony start, wide front, good tires, $6000; Pat Ridders nnn-nnn-nnnn (Albany OR)
John Deere 80, both engines run very well, tin is in good shape, can email photos, only 3500 of these so getting hard to find, excellent for a pulling tractor or full restoration, $8500 or will take a 4020, 4030 etc. in trade; Jerry Nash nnn-nnn-nnnn or xxxx@xxxx.xxx (Bridger MT)
John Deere 820 black dash, runs, big fenders, foot throttle, dual hydraulics, fair overall, $5500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A hydraulic pump, fits behind magneto or distributor, $100; Pat Ridders nnn-nnn-nnnn (Albany OR)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch, wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere AO, styled, good shape, hydraulic pump with remote, wide front, fair tires, $2300; Pat Ridders nnn-nnn-nnnn (Albany OR)
John Deere AOS reproduction hood, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)
John Deere AOS Streamline, unrestored and runs, only 800 made, $6000. Email for photos and You tube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)
John Deere AR, $1900; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere AR, 1946, electric start with lighting package, really nice straight tractor, engine is loose, easy to get running again, excellent for restoration or leave in working clothes, $1700, open to offers and/or interesting trades; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
John Deere AW high clearance, 1950, starts easily and runs and drives well and is in good mechanical condition. The sheet metal is fair. The rear tires are 12.4-42 in excellent condition. The hydraulics and PTO work well as they should. Tractor used at many of our plow days to pull a John Deere plow, $2500. Email for photos, Youtube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)
John Deere B?, $2200; Cathye McCracken nnn-nnn-nnnn (Crawfordsville OR)
John Deere BO, $2600; Cathye McCracken nnn-nnn-nnnn (Crawfordsville OR)
John Deere BWH, SN 101032 and BWH, SN 183944, serial numbers verified. Selling as a pair as the fronts need to be swapped. Tractors are unrestored, both have factory round spoke 40-inch rears, with a good set of tires on one and other is on rims. BNH front is factory spokes, stored in a shed, have good sheet metal, call or text for more info, open to offers; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)
John Deere D, $975; Don Chappell nnn-nnn-nnnn (St. Helens OR)
John Deere D, 1944, SN 158955, have all parts with new radiator and electric start, $2700; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, 1948, aftermarket live hydraulics, $1500; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
John Deere late B carburetor, DLTX 73 core, no breaks or repairs, $75; Tim Morris nnn-nnn-nnnn (Napa CA)
John Deere M, 1951, good rear tires, very good original condition, complete, starts easily, and runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2500. Email for photos, Youtube video, or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)
John Deere Model 420W, starts easily and runs and drives well. In very good mechanical condition. The sheet metal, transmission, wheels and tires are all very good. The hydraulics, 3pt hitch, and PTO work well as they should. The engine was overhauled about ten years ago and the tractor has had about 150 hours on it since then. One big bonus is the factory power steering that makes this a very easy tractor to drive. $3800. Email for photos and You tube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or xxxx@xxxx.xxx email preferred (Woodland CA)
John Deere parts: Fender bracket for JD MT. Several hoods for JD As and Bs, $125 each. Front 16 inch cut down wheels with tires off a 1936 JD AR, $200. Front steel wheels from 1927 D with road bands, very little wear, $450 for the pair. Block and pistons from 1948 B. Standard A pistons, used, $75 per set. JD A connecting rods, $150 per set. DLTX-34, 53, 67 and 71 carburetor cores, $150 each; Chris Carl nnn-nnn-nnnn xxxx@xxxx.xxx (Camano Island WA)
John Deere tractors: JD BN, 1946, cast iron dash, electric start, make offer. 1937 JD A on steel wheels with rear extensions, ran at show last year, has been parked since, $3000. Two JD ARs on steel, $2000 each. JD AOS, $3500. JD BR, 1936, on steel, $2500. JD D, 1937, round spoke wheels front and rear, comes with new radiator core, rebuilt magneto and carburetor, motor is loose, needs some assembly, $2250. JD AR, 1945, project, $600. JD 40C, 4 roller, JD manual angle blade, runs and drives, pins and bushings and sprockets are very worn, $1500. JD 40S, loader, runs, transmission has bad bearing, one rear rim and tire bad, have extra transmission, tire and rim to go with it, $1500. JD A, 1952, $1000. JD B, 1948, $800. JD B, 1939, $750. JD AW, 1948 with 42-inch rears, $2000. JD B, 1950, live hydraulics, new rear tires, $1500. JD 720 black dash, dual hydraulics, pony start, $2500; Chris Carl nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)
John Deere, 1936, unstyled cylinder block, standard bore, no cracks or repairs, has .006 taper, could be used as is, $250. Set of matching standard pistons, $45; Tim Morris nnn-nnn-nnnn (Napa CA)
McCormick Deering I-4, turns over, good shape, $950. O-4, runs, missing orchard sheet metal, $1000. O-4, very early motor, stuck, missing orchard sheet metal. O-4 parting out: orchard belt pulley, shutters, plus misc. Rare ODS-6s orchard diesel engine free and 1 parts tractor, both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O4, 1947, SN OBH17721W1, runs well, no orchard sheet metal, $2200; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
McCormick Deering tractor, can’t read tag, tires shot, motor turns over, pictures available, $700; Vern Fought nnn-nnn-nnnn text is best (Exeter CA)
Oliver 77 row crop, 1949, narrow front end, ran when parked, unrestored, make reasonable offer; Carole Smith nnn-nnn-nnnn (Dayton NV)
Oliver 80, Wheatland, $1400; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Oliver 88 row crop, Wheatland factory wide front, restored 8 years ago, runs great, has all rare Wheatland sheet metal, like new tires, 3 sets of rear wheel weights, front tires are new, stored inside, rare tractor, purchased from original owner, rear fender extensions, haven’t seen one like this around; Ron Hunter nnn-nnn-nnnn or xxxx@xxxx.xxx (Puyallup WA)
Oliver factory rear steps for 66-880 tractors, axle mount, nice shape; Ron Hunter nnn-nnn-nnnn or xxxx@xxxx.xxx (Puyallup WA)
Oliver Super 66 diesel, 1955, wide front, rear tires are usable, one rear rim needs repair, sheet metal almost perfect, tractor needs to be restored, have tractor build card, been kept under cover, runs but not well, less than 200 made in 1955, can send pictures; Ron Hunter nnn-nnn-nnnn or xxxx@xxxx.xxx (Puyallup WA)
Oliver Super 88, diesel, wide front, runs great, injection pump was removed and gone through along with injectors, tractor is disassembled to restore, have build card, one of the last 200 made, if not sold complete, then might part out, sheet metal, grille, are almost perfect, great restoration project; Ron Hunter nnn-nnn-nnnn or xxxx@xxxx.xxx (Puyallup WA)
Power Horse A20, 1938, made in Salt Lake City, UT, $8000; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Rims, 2 available, 12x36 inch, 2 rib rims, with tires (10-20%), $100 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Rims, 2 available, clamp on duals, 12x24 inch, one with no tire one with 14x24 inch tire (40%), $200 for the set obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Rumley Oil Pull 20-40 G, 1923, excellent project tractor, engine is loose, has good pinion gears, but bull gears will need to be replaced, transmission has damage but comes with a spare, $19500, open to offers and/or interesting trades; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
Sherman step up/down transmission for Ford 8N and similar tractors. Included is the adapter plate and a separate pilot shaft to assist in alignment. Update your four-speed standard transmission to create 12 forward and 3 reverse speeds, $480; Ray Dias nnn-nnn-nnnn (Hughson CA)
Tires, 11.25x24 rear combine tires, good condition, highway tread, $50 each; David Ruark nnn-nnn-nnnn (Pomeroy WA)
Tires, 11.2x24 on round spoke John Deere wheels, not a matched pair, 75% tread, pictures available, $750; Vern Fought nnn-nnn-nnnn text is best (Exeter CA)
Tires, 13x24, matched set on John Deere round spoke wheels, 50% tread, pictures available, $750; Vern Fought nnn-nnn-nnnn text is best (Exeter CA)
Tires, 9.5x42, Firestone, matched pair, 85% tread, pictures available, $200; Vern Fought nnn-nnn-nnnn text is best (Exeter CA)
Tires, older, not used, 7.5x24, were in a barn for years, hard size to find, make reasonable offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Tires, two Goodyear 7.5x16 single rib front tractor tires, $25 each; John Lang nnn-nnn-nnnn (Monmouth OR)
Tires: two 16.9x26 unmatched decent shape, 50% plus tread, $100; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Wheels, 10x26 from a John Deere H, 7 lug bolt holes, $35 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Wheels, 2 available, 12x36 inch, 9 lug bolts on 9.5-inch circle, no tires, $100 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Wheels, two 12x28 4 rail power adjust tractor wheels, $200 each; John Lang nnn-nnn-nnnn (Monmouth OR)