February 2019 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers C, parts tractor, complete, $200; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Allis Chalmers K35, parting out; Buck Evans nnn-nnn-nnnn (Greenville IL)

Case 580 backhoe and front loader buckets, 82 inches wide, rear backhoe bucket, 12 inches wide, $650 each; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Case C, S or R F&H HC245 rear round spoke wheels 9x24, $300. Case C S D parts, Case DC-4 with heart shaped front end, hand clutch, live PTO, hydraulic and eagle hitch, runs, need some tinkering, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case combines, both 1935 model V, pull type, one complete with 14 foot header and sacking equipment including chutes, other for parts, hauling available, FREEEEE; Boyd Jefferies nnn-nnn-nnnn (Colfax WA)

Case V rear wheel weights; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 10 castings and some parts; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 10, 20 and 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 20 radiator, $200; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 22 1J WSP wide pad runs and drives, needs valve job, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Caterpillar D2 for parts, without blade, fairly complete, $2200; Carol nnn-nnn-nnnn (Keno OR)

Caterpillar D2 with blade, nice condition, $7000; Carol nnn-nnn-nnnn (Keno OR)

Caterpillar D4 7U, tracks and undercarriage in excellent shape, pony motor with battery start, live hydraulics, seat is also in good condition, $4200; Sean Moylan nnn-nnn-nnnn (Woodland CA)

Cletrac HG 42 crawlers, two available and one frame and tracks, one crawler has a winch made by Pacific Car and Foundry, $900 for all; Larry nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Dexter OR)

Farmall 460-cylinder head, came from 6-cylinder, 236 cubic inch diesel engine, $160 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Farmall A, sickle bar mower, $1000; Jim McCracken nnn-nnn-nnnn (Crawfordsville OR)

Farmall A, tires ok, engine stuck, needs some parts, $300; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall H, 1946, runs good, new transmission, wide front, extra long rear axles, $2000; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Farmall M, 1947, restored, narrow front, new rear tires, front tires good, everything works, new paint. Tractor has been in the Timmerman family in Powell Butte OR since 1947. $3500 obo; Dennis nnn-nnn-nnnn (Powell Butte OR)

Farmall MD MDCH with Swartz wide front and 3pt hitch, SN FDBK261846X20C, $1200; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Farmall parts: Cub, A, B, C, H and M, what do you need; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall sheet metal from A to 450, plus misc. parts. Super M motor stuck, missing heads, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super C, 1953, all original, very straight tin, runs great, starts good, early 90s restoration, stored in barn, $1500; Dale Roth nnn-nnn-nnnn (Sweet Home OR)

Farmall Super C, 1954, 2pt Fast Hitch, C20 2-14 plow, International Windbreaker, drawbar, IH umbrella; Al Barkl nnn-nnn-nnnn (Twin Falls ID)

Ford 2N with ARPS tracks with good pads, links worn, SN 134355, Sherman high and low range, no 3pt, $2300; Larry nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Dexter OR)

Ford 4000, 1962, wide front, power steering, 4-cylinder gas, has good tires on spinouts, $2000; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Ford 800, call for information; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Ford 8N, with bucket, needs work, $1000; Jim McCracken nnn-nnn-nnnn (Crawfordsville OR)

Ford N series orchard sheet metal, useable, $1200; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Harris Power Horse, 4-wheel drive, $3100 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Harry Ferguson TO-20, 1948, good condition, runs great, converted to 12V, includes two drag boxes; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Byron CA)

Hart Parr 18-28, parts tractor, wide front complete, tires poor, SN 801828, $500; Larry nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Dexter OR)

International 350 Hi Utility, fast hitch, 1 remote, runs, needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 460 Utility, 282 cubic inch diesel engine, $1400 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International Hough Payloader, unknown model, appears to have a Chevrolet 6 cylinder repower engine, has not run for some time, appears to be complete, good for parts or restoration, tires are round and black, one new tire included (was stored inside), bucket size 1-2 yards?, looks standard, will load on your trailer, $499, email for more photos or questions; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

International O4 orchard tractor, not complete, has original orchard sheet metal and extra orchard hood side panels. International W4 tractor, $850 for all; Kurt Spegel nnn-nnn-nnnn (Cornelius OR)

Iseki/Bolens 4x4 tractor, 20 hp, rear wheels and tires, tires are lug and in good shape, $250; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 40 crawler, 5 roller with winch, ROPS, blade and brush rake, starts, runs, steers both ways very well, crawler has very good undercarriage, nice sheet metal, one of the nicest seen, getting hard to find in this condition, $5500 firm; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 40U and 40S, unrestored, in shed with fair sheet metal, open to offer; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)

John Deere 420T, 1958, very nice running tractor, very good sheet metal, new front tire, tires are weathered but very usable, tractor has 3pt lift, but missing the arms, great parade tractor, $1950; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere 420W, starts easily and runs and drives well, very good mechanical condition, sheet metal, transmission, wheels and tires all very good, hydraulics, 3pt, and PTO work as they should, engine was overhauled about 10 years ago and has about 150 hours of run time since, big bonus of factory power steering, making this an easy driver, $3600; John Boehm nnn-nnn-nnnn or vintagetractors.com or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere 440 crawler rear belly pan; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 50, new engine, new radiator, all sheet metal, $2500; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

John Deere 60, narrow front with Roll-o-Matic, 42-inch rear wheels, $1600; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 60, Roll-o-Matic, new grille, complete, $1800; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

John Deere 620 full gasket set; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 820 black dash, runs, big fenders, foot throttle, dual hydraulics, fair overall, $5500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch, wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere AOS streamline tractor, unrestored and runs, only 800 made, $5700; John Boehm nnn-nnn-nnnn or vintagetractors.com or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere AR, $1700; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere AR, 1951, engine was rebuilt in 2006, strong runner, newer front tires, all sheet metal is included, fenders are a little rough, call or text with inquiries, $1700; Jason nnn-nnn-nnnn (Everson WA)

John Deere AW high clearance, 1950, starts easily, runs and drives well, good mechanical condition, sheet metal is fair, rear tires are 12.4x42 in excellent condition, hydraulics and PTO work well as they should, tractor used at many plow days to pull JD plow, $2400, email for photos; John Boehm nnn-nnn-nnnn or vintagetractors.com or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere B, 1950, front and back cultivator bars, everything works, ready for parade or work; Jim nnn-nnn-nnnn (Ducor CA)

John Deere B?, $2200; Cathye McCracken nnn-nnn-nnnn (Crawfordsville OR)

John Deere BO, $2600; Cathye McCracken nnn-nnn-nnnn (Crawfordsville OR)

John Deere BR, 1945, electric start, tractor starts easily and runs well, has fair tires, good steering, good clutch, good steering brakes, transportation available, $4000; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA) [see picture]

John Deere BWH tractors, 1945 and 1946, both on spoke rear wheels, rough but the real thing with confirmed with SN research documents, $2000 each or both for $3600; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere BWH, SN 101032 and BWH, SN 183944, serial numbers verified. Selling as a pair as the fronts need to be swapped. Tractors are unrestored, both have factory round spoke 40-inch rears, with a good set of tires on one and other is on rims. BNH front is factory spokes, stored in a shed, have good sheet metal, call or text for more info, open to offers; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)

John Deere crawler with #90 loader, 5 speed reverser, $3500 obo; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere D, 1944, SN 158955, have all parts with new radiator and electric start, $2700; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere D, live hydraulic system, $150; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere G, 1948, aftermarket live hydraulics, $1500; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

John Deere late B carburetor, DLTX 73 core, no breaks or repairs, $75; Tim Morris nnn-nnn-nnnn (Napa CA)

John Deere M, 1951, good rear tires, very good original condition, complete, starts easily and runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2400; John Boehm nnn-nnn-nnnn or vintagetractors.com or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere MC 15, second owner, not stuck. 2 sets of MC tracks; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere parts for two cylinders crawlers, few MC track pads, miscellaneous engine parts, drive shafts, bull gears, etc, call for more info; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere parts tractors: Unstyled B, SN 32909, 36 inch cast rears, some parts missing, bad tires. Two Ms, one has belt pulley, some parts missing. Open to suitable offers; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)

John Deere parts: Fender bracket for JD MT. Several hoods for JD As and Bs, $125 each. Front 16 inch cut down wheels with tires off a 1936 JD AR, $200. Front steel wheels from 1927 D with road bands, very little wear, $450 for the pair. Block and pistons from 1948 B. Standard A pistons, used, $75 per set. JD A connecting rods, $150 per set. DLTX-34, 53, 67 and 71 carburetor cores, $150 each; Chris Carl nnn-nnn-nnnn xxxx@xxxx.xxx (Camano Island WA)

John Deere tractors: JD BN, 1946, cast iron dash, electric start, make offer. 1937 JD A on steel wheels with rear extensions, ran at show last year, has been parked since, $3000. Two JD ARs on steel, $2000 each. JD AOS, $3500. JD BR, 1936, on steel, $2500. JD D, 1937, round spoke wheels front and rear, comes with new radiator core, rebuilt magneto and carburetor, motor is loose, needs some assembly, $2250. JD AR, 1945, project, $600. JD 40C, 4 roller, JD manual angle blade, runs and drives, pins and bushings and sprockets are very worn, $1500. JD 40S, loader, runs, transmission has bad bearing, one rear rim and tire bad, have extra transmission, tire and rim to go with it, $1500. JD A, 1952, $1000. JD B, 1948, $800. JD B, 1939, $750. JD AW, 1948 with 42-inch rears, $2000. JD B, 1950, live hydraulics, new rear tires, $1500. JD 720 black dash, dual hydraulics, pony start, $2500; Chris Carl nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)

John Deere weights: 40-430-430U or S (I think) rear wheel weights for 24 in and 26 in rims, $100 each. Front mount weights, 3 available, 1 inner and 2 outer, $100 each, pickup only, 2 rear and 2 front in Terra Bella CA, 1 front in Santa Barbara CA, could take to Turlock swap meet; Jim nnn-nnn-nnnn (Terra Bella CA)

John Deere, 1936, unstyled cylinder block, standard bore, no cracks or repairs, has .006 taper, could be used as is, $250. Set of matching standard pistons, $45; Tim Morris nnn-nnn-nnnn (Napa CA)

Massey Ferguson 65 gas parts, good engine; Buck Evans nnn-nnn-nnnn (Greenville IL)

Massey Ferguson quick change belt pulley, $250; Buck Evans nnn-nnn-nnnn (Greenville IL)

Massey Ferguson TO-20, painted and gone through, 3pt and PTO work, excellent tires, ready for parade or work; Jim nnn-nnn-nnnn (Ducor CA)

Massey Harris Pony, motor turns over, been sitting for years, good sheet metal, parts or restore, make offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

McCormick Deering I-4, turns over, good shape, $950. O-4, runs, missing orchard sheet metal, $1000. O-4, very early motor, stuck, missing orchard sheet metal. O-4 parting out: orchard belt pulley, shutters, plus misc. Rare ODS-6s orchard diesel engine free and 1 parts tractor, both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering O4, 1947, SN OBH17721W1, runs well, no orchard sheet metal, $2200; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

McCormick Deering tractor, can’t read tag, tires shot, motor turns over, pictures available, $700; Vern Fought nnn-nnn-nnnn text is best (Exeter CA)

Oliver 80, Wheatland, $1250; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Oliver 88, standard rears, good front, ran 3 or 4 years ago when parked in the shed, $1800; Jack Macki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Oliver 88s, two unrestored “old style” tractors, one standard, one row crop, have been in storage and not run in last 20 years, your choice $4500 or $8000 for the pair, email for details or pictures; Ken Durrell nnn-nnn-nnnn or xxxx@xxxx.xxx (Eugene OR)

Oliver OC3/Cletrac HG crawlers parts, bull gears, clutches, magnetos and starters, some cores, some rebuilt, grilles, hoods, fenders, etc, call for more info; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Power Horse A20, 1938, made in Salt Lake City, UT, $7200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rims, 2 available, 12x36 inch, 2 rib rims, with tires (10-20%), $90 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rims, 2 available, clamp on duals, 12x24 inch, one with no tire one with 14x24 inch tire (40%), $180 for the set obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Sherman step up/down transmission for Ford 8N and similar tractors. Included is the adapter plate and a separate pilot shaft to assist in alignment. Update your four-speed standard transmission to create 12 forward and 3 reverse speeds, $480; Ray Dias nnn-nnn-nnnn (Hughson CA)

Tires, 11.2x24 on round spoke John Deere wheels, not a matched pair, 75% tread, pictures available, $750; Vern Fought nnn-nnn-nnnn text is best (Exeter CA)

Tires, 13x24, matched set on John Deere round spoke wheels, 50% tread, pictures available, $750; Vern Fought nnn-nnn-nnnn text is best (Exeter CA)

Tires, 9.5x42, Firestone, matched pair, 85% tread, pictures available, $200; Vern Fought nnn-nnn-nnnn text is best (Exeter CA)

Tires, two Goodyear 7.5x16 single rib front tractor tires, $25 each; John Lang nnn-nnn-nnnn (Monmouth OR)

Tires: 14.9x26 rear tires, about 75%, good rubber, $250 for the pair, pickup in Terra Bella CA or could haul to Turlock swap meet; Jim nnn-nnn-nnnn (Terra Bella CA)

Tires: 8.3x24 Goodyear tractor tires, $100 for both, delivery possible; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)

Tires: matched pair of Goodyear 16.9x28 tires, about 25-30% tread left, $100 for the pair, pictures available; Ken Durrell nnn-nnn-nnnn or xxxx@xxxx.xxx (Eugene OR)

Titan 10-20, 1919 model, runs good, head rebuilt 10 years or so ago, lots of other money spent, reproduction fenders never installed, allowed to rust to match rest of tractor, no paint whatsoever, San Diego area, $10500; Brian Henderson nnn-nnn-nnnn (San Diego CA)

Wheel weight for 16 inch wheel, 2 halves to make 1 full; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Wheel weights for John Deere 40U; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Wheels, 10x26 from a John Deere H, 7 lug bolt holes, $30 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Wheels, 2 available, 12x36 inch, 9 lug bolts on 9.5-inch circle, no tires, $90 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Wheels, two 12x28 4 rail power adjust tractor wheels, $200 each; John Lang nnn-nnn-nnnn (Monmouth OR)