Aermotor 8 cycle, 1 hp, hit and miss, approximately 1917, has magneto, no guards, shafts and gears are in excellent condition, have run it at many shows, has been in storage for 5 years, mounted on a steel frame (not original wood), on a caster wheel cart with pump and water tank, $900; Dan Brockman nnn-nnn-nnnn (Chico CA)
Alamo 2-1/2 hp, hopper cooled, $1500; Randy Jarrett nnn-nnn-nnnn or Dick Watson nnn-nnn-nnnn (Durham CA)
Alamo Victor, 3 hp, vertical tank cooled, $4000; Randy Jarrett nnn-nnn-nnnn or Dick Watson nnn-nnn-nnnn (Durham CA)
Brass drip oiler collection: Lukenheimer No 1 through No 4, Michigan, Detroit and others, lots of new/unused, $40 to $100 each; Harvey Dale nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)
Cushman, 2 cylinder, vertical, not stuck, $375; Tom nnn-nnn-nnnn (Ridgefield WA)
Cushman, 4 hp, binder engine, $300; Tom nnn-nnn-nnnn (Ridgefield WA)
Doak, 5 hp, $9500, pictures on request; Dick Watson nnn-nnn-nnnn (Gridley CA)
Drag saw, Wade, not complete, tanks, wood frame good, engine will turn, parts or yard art, $25; Dave nnn-nnn-nnnn (Aurora OR)
Ellis, 3 hp, $3500, pictures on request; Dick Watson nnn-nnn-nnnn (Gridley CA)
Ericksson, 5 inch, hot air, $6500, pictures on request; Dick Watson nnn-nnn-nnnn (Gridley CA)
Fairbanks 1-1/2 hp, hopper condenser cooler, needs work, stuck, $200 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Fairbanks Morse, 2 hp, self oiling styled on home made cart, $350; Jack Macki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)
Fairbanks Morse, No 1, Eclipse, 1-1/2 hp, 1 flywheel, $475; Tom nnn-nnn-nnnn (Ridgefield WA)
Ford “Dorsett” diesel, English, 6-cylinder, bus engine from Singapore, only $150; T Van Tassel nnn-nnn-nnnn (Richmond CA)
Hardy, 12 hp, Chinese marine diesel, $200 obo; T Van Tassel nnn-nnn-nnnn (Richmond CA)
Ideal Type M, 2-1/2 hp, vertical, has magneto, $400; Tom nnn-nnn-nnnn (Ridgefield WA)
International 1 hp, Tom Thumb, $1200; Randy Jarrett nnn-nnn-nnnn or Dick Watson nnn-nnn-nnnn (Durham CA)
International Famous: 2-1/2 hp, horizontal hopper cooled, $3500. Two, 3 hp, vertical tank cooled, $3500 each. 2 hp vertical air cooled, $5000. 3-1/2 or 4 hp, vertical tank cooled, $3500; Randy Jarrett nnn-nnn-nnnn or Dick Watson nnn-nnn-nnnn (Durham CA)
International LB, 1-1/2 to 2-1/2 hp, have a couple of engines, both loose, should start, $300 each; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
International M, 6 hp, EK Wico magneto, needs to be restored, not stuck, $325; Tom nnn-nnn-nnnn (Ridgefield WA)
International Mogul 4 hp, side shaft, $5500. Parts engine, $1000; Randy Jarrett nnn-nnn-nnnn or Dick Watson nnn-nnn-nnnn (Durham CA)
International Mogul Junior, 1 hp, slant top, $3000; Randy Jarrett nnn-nnn-nnnn or Dick Watson nnn-nnn-nnnn (Durham CA)
Inverted Webster, 2-1/2 hp, air cooled and hot tube, $15000, pictures on request; Dick Watson nnn-nnn-nnnn (Gridley CA)
John Deere E, 3 hp, $900 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
John Deere magneto for JD E, reconditioned and hot, $350-$425; Harvey Dale nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)
LeRoi upright, 4 hp (about), throttle type motor with a magneto, all there, restored near perfect about 10 years ago, runs great, painted red, on a cart, $800; Dan Brockman nnn-nnn-nnnn (Chico CA)
Lunkenheimer carburetor, 3/4 in, good condition, $125; Dave nnn-nnn-nnnn (Aurora OR)
McCormick Deering, 2 hp, loose, been converted to coil and points ignition, no magneto, $200 obo; Chris Carl nnn-nnn-nnnn or xxxx@xxxx.xxx (Camano Island WA)
New Way binder engine, good compression, magneto, complete except clutch assembly, $435; Morrie Robinson nnn-nnn-nnnn (Sedro Woolley WA)
Novo 3 hp, $400; Tom nnn-nnn-nnnn (Ridgefield WA)
Sattley 3-1/2 hp, throttle governed, Wico magneto, $350; Tom nnn-nnn-nnnn (Ridgefield WA)
Schmidt chill cylinder, 3 hp type H, SN X7597, 1907, buzz coil, $2800; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Sheffield, 7 hp, push rod, hopper cooled, on period cart, $3800; Richard Watson nnn-nnn-nnnn or xxxx@xxxx.xxx (Gridley CA)
Stickney 1-3/4 hp, $9500; Randy Jarrett nnn-nnn-nnnn or Dick Watson nnn-nnn-nnnn (Durham CA)
Stickney, 3 hp, on original cart, $9000, pictures on request; Dick Watson nnn-nnn-nnnn (Gridley CA)
Tiny 4-cylinder flat head engines (two), probably Waukesha or Hercules, $40 obo for both; T Van Tassel nnn-nnn-nnnn (Richmond CA)
Titusville Olin, 15 hp, hot tube, beautifully restored 15 years ago, but has sat outside for several years now and needs TLC, great runner, heavy breather, was freshly rebuilt and is not even broken in, on wooden skids, $6000; Brian Henderson nnn-nnn-nnnn (San Diego CA)
VM Italian diesel, 6-cylinder, turbo, set up for AMC Eagle, weird dealer option, may fit Jeep, $1000 obo; T Van Tassel nnn-nnn-nnnn (Richmond CA)
Wico EK magnetos, 5 available, reconditioned hot, $250 each; Harvey Dale nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)
Wisconsin V4 engine, ran when it was put into storage, $180 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)
Wisconsin V4 engine, stuck, electric start, $80 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)