March 2019 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, 1939, parade quality, you won’t be disappointed, $2500; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

Allis Chalmers K35, parting out; Buck Evans nnn-nnn-nnnn (Greenville IL)

Case 310 crawler top roller, brand new, $75 plus shipping; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Case 310 crawler, straight blade and bucket, gas and diesel; Charles Wallace nnn-nnn-nnnn (Toledo WA)

Case 580 backhoe and front loader buckets, 82 inches wide, rear backhoe bucket, 12 inches wide, $750 each; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Case 580 backhoe; Charles Wallace nnn-nnn-nnnn (Toledo WA)

Case C, 1937, runs, last shown at the 2018 Branch 245 show, $1800, pictures on request; Nick nnn-nnn-nnnn or xxxx@xxxx.xxx (Seabeck WA)

Case C, S or R F&H hc245 rear round spoke wheels 9x24 $300. Case C S D parts, Case DC-4 with heart shaped front end hand clutch live PTO, hydraulics and eagle hitch, runs need some tinkering $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case CO, 1935, on steel, ran about 15 years ago, been stored inside, $1300; Rusty Brizendine nnn-nnn-nnnn (Roseburg OR)

Case combines, both 1935 model V, pull type, one complete with 14 foot header and sacking equipment including chutes, other for parts, hauling available, FREEEEE; Boyd Jefferies nnn-nnn-nnnn (Colfax WA)

Case V rear wheel weights; Buck Evans nnn-nnn-nnnn (Greenville IL)

Case VAC; Charles Wallace nnn-nnn-nnnn (Toledo WA)

Case VAO, good sheet metal, good rims, tires hold air, engine doesn’t currently run, has aftermarket 3pt, has rear weights, $400; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Caterpiallar D4 final drive seal, 4 pieces, will fit D47U, 6U, 40A, 39A, etc. brand new aftermarket, $60 each, must take all 4; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar 10 castings and some parts; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 10, 20 and 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 20 radiator, $200; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 22 PTO assembly, $250; James Zimmerman nnn-nnn-nnnn (Wheeling MO)

Caterpillar 22, 1J WSP wide pad, runs and drives, needs valve job, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Caterpillar D2 5J, wide gauge, runs good, hydraulic bull dozer blade, brand unknown, undercarriage is fair, $2500 obo; Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2 for parts, without blade, fairly complete, $2200; Carol nnn-nnn-nnnn (Keno OR)

Caterpillar D2 with blade, nice condition, $3500; Carol nnn-nnn-nnnn (Keno OR)

Caterpillar D4 7U, tracks and undercarriage in excellent shape, pony motor with battery start, live hydraulics, seat is also in good condition, $4200; Sean Moylan nnn-nnn-nnnn (Woodland CA)

Caterpillar D7 3T series, 1948, tractor runs great, has electric pony that runs great, has hydraulic assist steering and forward/reverser lever, undercarriage is good, grousers are a little low, small oil leak on one final drive and radiator has a few small leaks, no attachments or accessories, $4000 obo; Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar headlight with mesh cover, has dent on back, can email photos, $50; Carol nnn-nnn-nnnn (Keno OR)

Cletrac HG 42 crawlers, two available and one frame and tracks, one crawler has a winch made by Pacific Car and Foundry, $900 for all; Larry nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Dexter OR)

Cockshutt 30/Co-op E3, 1948, row crop, 153 cubic inch 4 cylinder Buda, new crank bearings, engine sleeves and repair sleeves, full gasket set, valve grind, good oil pressure, runs and starts good, 8 speed forward, 2 reverse, live PTO, good tin, usable tires, all hold air, 38 inch adjustable rears, needs brakes lined and pinion seals, $1300 obo; Francis Garceau nnn-nnn-nnnn (Jefferson OR)

Cockshutt/Co-op E3 parts, including 4B153 and 6B230 engine parts; Francis Garceau nnn-nnn-nnnn (Jefferson OR)

Delco Remy 28-B 19832 starter for Farmall A or Super A, been told it fits these, but can’t guarantee, can crate and take to shipper of choice, shipping to be paid by buyer, planning on going to National Early Days Gas Engine show in Red Bluff in April, can deliver if paid for in advance; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)

Farmall 460-cylinder head, came from 6-cylinder, 236 cubic inch diesel engine, $160 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Farmall A, tires ok, engine stuck, needs some parts, $300; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall BN, 1942, rebuilt engine, custom wide seat, $3500; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

Farmall Cub belt pulley, $125, can crate and take to shipper of choice, shipping to be paid by buyer, planning on going to National Early Days Gas Engine show in Red Bluff in April, can deliver if paid for in advance; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)

Farmall Cub, 1947, SN 709, all original except for original motor being rebuilt, front wheel weights, refurbished 20 years ago and includes one gallon of IH paint unopened, excellent sheet metal, runs sweet, $2250; Russ Shorten nnn-nnn-nnnn (Dayton WA)

Farmall H rear skeleton steel wheels with lugs in good shape $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall parts: Cub, A, B, C, H and M, what do you need; Wendell Newman nnn-nnn-nnnn or xxxx@xxxx.xxx (Carson City NV)

Farmall sheet metal from A to 450 plus misc parts. Super M motor stuck missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super A, runs, hydraulics work, fair tires, good tin, restorable, $700 obo; Francis Garceau nnn-nnn-nnnn (Jefferson OR)

Farmall Super AV, 1948, high crop, parade quality, excellent rubber, $4500; Rod Hisken nnn-nnn-nnnn or 530-6329270 (Oregon House CA)

Farmall Super C, 1953, all original, very straight tin, runs great, starts good, early 90s restoration, stored in barn, $1500; Dale Roth nnn-nnn-nnnn (Sweet Home OR)

Farmall Super C, 1954, 2pt Fast Hitch, C20 2-14 plow, International Windbreaker, drawbar, IH umbrella; Al Barkl nnn-nnn-nnnn (Twin Falls ID)

Farmall tractors: 1947 A with AV front axle and wheels. 1953 Super H. Condition varies, best offer; Sean Moylan nnn-nnn-nnnn (Woodland CA)

Ford 2N on steel, WWII, very original with original plow, runs very good, no smoke, full set lugs and front rims, $2400; George nnn-nnn-nnnn (Albany OR)

Ford 2N with ARPS tracks with good pads, links worn, SN 134355, Sherman high and low range, no 3pt, $2300; Larry nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Dexter OR)

Ford tractors: 1956 850. 9N with parts tractor and Howard rotovator. Condition varies, best offer; Sean Moylan nnn-nnn-nnnn (Woodland CA)

Harris Power Horse, 4-wheel drive, $3100 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Harry Ferguson TO-20, 1948, good condition, runs great, converted to 12V, includes two drag boxes; Ron nnn-nnn-nnnn or xxxx@xxxx.xxx (Byron CA)

Hart Parr 18-28, parts tractor, wide front complete, tires poor, SN 801828, $500; Larry nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Dexter OR)

Hercules GO298 gas engine from Case 1000 combine, down exhaust, 65 hp, good runner, good compression and oil pressure, still on combine engine stand, lots of life left in engine, $700 obo; Francis Garceau nnn-nnn-nnnn (Jefferson OR)

Homebuilt tractor on a 1924 steel frame and has a 1919 Fuller and Johnson motor, 3 hp throttle governed type, starts easily, runs great, all original and complete motor. Tractor is 11 feet long, 5 feet high and 5 feet wide, has 42 inch flat metal wheels in rear and 24 inch in the front, runs on magneto, it is actually a kerosene model but always run on gas. It has been taken to many shows and parades (eye catcher), quite clean as is, but probably should be cleaned and repainted, $2000; Dan Brockman nnn-nnn-nnnn (Chico CA)

International 350 Hi-Utility fast hitch, 1 remote, runs needs TA work $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International 460 Utility, 282 cubic inch diesel engine, $1400 obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

International Hough Payloader, unknown model, appears to have a Chevrolet 6 cylinder repower engine, has not run for some time, appears to be complete, good for parts or restoration, tires are round and black, one new tire included (was stored inside), bucket size 1-2 yards?, looks standard, will load on your trailer, $499, email for more photos or questions; Mel Ford nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)

International O4 orchard tractor, not complete, has original orchard sheet metal and extra orchard hood side panels. International W4 tractor, $850 for all; Kurt Spegel nnn-nnn-nnnn (Cornelius OR)

International top link, has 37591-R-1 on it, 1 inch holes, 23 inches closed, $30; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

International: 10-20, T20, WO41, Super C, A, Cubs and Lowboys, F12-F14-F20 and more; Charles Wallace nnn-nnn-nnnn (Toledo WA)

John Deere 1947 D electric start repainted nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere 40 crawler bulldozer with nice winch and blade, crawler in very good condition all around, good undercarriage, has ROPS, starts and runs very well, one of the nicest seen, all original except 12V, $5500 firm; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

John Deere 4020, 95 hp diesel, 8 speed synchronized transmission, 540/1000 PTO, power steering, runs great, original paint, like new front and rear tires, $8500; Dick Benson nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)

John Deere 420W, starts easily and runs and drives well, very good mechanical condition, sheet metal, transmission, wheels and tires all very good, hydraulics, 3pt, and PTO work as they should, engine was overhauled about 10 years ago and has about 150 hours of run time since, big bonus of factory power steering, making this an easy driver, $3600; John Boehm nnn-nnn-nnnn or vintagetractors.com or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere 440 crawler rear belly pan; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 50, 1954, decent tires, good tin, painted about 10 years ago, runs great, $2000; Rod Hisken 530692-0919 or nnn-nnn-nnnn (Oregon House CA)

John Deere 60, narrow front with Roll-o-Matic, 42-inch rear wheels, $1600; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere 620 full gasket set; Joe Keith nnn-nnn-nnnn (Hermiston OR)

John Deere 820, black dash, runs, big fenders, foot throttle, dual hydraulics, fair overall, $5500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26 inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30 inch wheel cast centers part #F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere A, Johnny Popper, needs battery, $2000; Carol nnn-nnn-nnnn (Keno OR)

John Deere AN, 1949, new radiator, ran when parked, fair rubber, good tin, $1800; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

John Deere AOS streamline tractor, unrestored and runs, only 800 made, $5700; John Boehm nnn-nnn-nnnn or vintagetractors.com or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere AR, $1700; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

John Deere AR, 1951, engine was rebuilt in 2006, strong runner, newer front tires, all sheet metal is included, fenders are a little rough, call or text with inquiries, $1700; Jason nnn-nnn-nnnn (Everson WA)

John Deere AW high clearance, 1950, starts easily, runs and drives well, good mechanical condition, sheet metal is fair, rear tires are 12.4x42 in excellent condition, hydraulics and PTO work well as they should, tractor used at many plow days to pull JD plow, $2400, email for photos; John Boehm nnn-nnn-nnnn or vintagetractors.com or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere B, 1943, complete tractor on steel wheels, fully restored but has been sitting for several years, still turns over, no rust, $2000; Cindy or Joe Lackner nnn-nnn-nnnn (Scio OR)

John Deere B, 1950, front and back cultivator bars, everything works, ready for parade or work; Jim nnn-nnn-nnnn (Ducor CA)

John Deere BR, 1945, electric start, tractor starts easily and runs well, has fair tires, good steering, good clutch, good steering brakes, transportation available, $4000; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Greenwood CA) [see picture]

John Deere BWH tractors, 1945 and 1946, both on spoke rear wheels, rough but the real thing with confirmed with SN research documents, $2000 each or both for $3600; John Boehm nnn-nnn-nnnn or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere crawler with #90 loader, 5 speed reverser, $3500 obo; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere D hood, from 1941, $80; Hubert Bierly nnn-nnn-nnnn (Bend OR)

John Deere D, 1927, in dry storage last 10 years, not stuck, comes with steel lugs and extension rims, $3000, pictures on request; Nick nnn-nnn-nnnn or xxxx@xxxx.xxx (Seabeck WA)

John Deere D, 1941, good shape, starts and runs fine, almost new rear rubber, sheet metal good-very good, pictures available, best offer; LeRoy Schoot nnn-nnn-nnnn (Goldendale WA)

John Deere D, 1946, very nice, easy start, easy drive, $4000; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

John Deere D, live hydraulic system, $150; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere M, 1951, good rear tires, very good original condition, complete, starts easily and runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2400; John Boehm nnn-nnn-nnnn or vintagetractors.com or email (preferred) xxxx@xxxx.xxx (Woodland CA)

John Deere M, 1951, parade unit, older restoration, recently touched up, professionally painted hood and grille with new decals, new gauges and front tires, rears are very good, gas tank cleaned and sealed, carberator overhauled, 12V conversion with small alternator, starts and runs very well. Included is JD 1064 hay wagon, completely restored and beautiful, new decal set, side racks and fold up rear steps, $3900 for both; Rick Murray nnn-nnn-nnnn (Klamath Falls OR)

John Deere MC 15, second owner, not stuck. 2 sets of MC tracks; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere MT(W), 1952, good tin, fair rubber, 3pt, parade seat, $2000; Rod Hisken nnn-nnn-nnnn or 530-6329270 (Oregon House CA)

John Deere parts tractors: Unstyled B, SN 32909, 36 inch cast rears, some parts missing, bad tires. Two Ms, one has belt pulley, some parts missing. Open to suitable offers; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)

John Deere tractors: 1945 BR/BO. 1948 M. Condition varies, best offer; Sean Moylan nnn-nnn-nnnn (Woodland CA)

John Deere weights: 40-430-430U or S (I think) rear wheel weights for 24 in and 26 in rims, $100 each. Front mount weights, 3 available, 1 inner and 2 outer, $100 each, pickup only, 2 rear and 2 front in Terra Bella CA, 1 front in Santa Barbara CA, could take to Turlock swap meet; Jim nnn-nnn-nnnn (Terra Bella CA)

John Deeres: A, B, D, H, 40 two cylinder crawler; Charles Wallace nnn-nnn-nnnn (Toledo WA)

Large collection of tractors, dozers, trucks and parts that have been gathered over 35 years. Time to downsize and allow others to restore them. There are John Deere, International and Minneapolis tractors. Oliver, Cletrac, Caterpillar and International dozers. Kenworth, Mack and International trucks. Parts include cabs, hoods, fuel pumps and injector parts. All dated between the 1920s and the 1970s. Almost all has been stored in shops and buildings. Come and get some history to preserve. Call to talk about what’s available or to come see. All reasonable offers considered, no scrappers; Jim Hayes nnn-nnn-nnnn (Issaquah WA)

Massey Ferguson 65 gas parts, good engine; Buck Evans nnn-nnn-nnnn (Greenville IL)

Massey Ferguson equipped with log splitter, works with PTO, $2300, can email photos; Carol nnn-nnn-nnnn (Keno OR)

Massey Ferguson fenders for 30-35, $50 for the pair; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Massey Ferguson quick change belt pulley, $250; Buck Evans nnn-nnn-nnnn (Greenville IL)

Massey Ferguson TO-20, painted and gone through, 3pt and PTO work, excellent tires, ready for parade or work; Jim nnn-nnn-nnnn (Ducor CA)

Massey Ferguson TO-35 diesel, needs a power steering unit; Larry Busack nnn-nnn-nnnn (Longview WA)

Massey Harris 44, 6 cylinder gas, 3pt hitch and PTO, runs good, one bad tire, but comes with extra tire, has MH original loader, narrow front axle, $800 obo; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Massey Harris 555LP, 65 hp, very few propane tractors produced, in barn clothes, believed to be a 1956, good pulling tractor or farm, $3200 obo; Terry Christner nnn-nnn-nnnn no calls after 6 pm (Molalla OR)

Massey Harris Pony, motor turns over, been sitting for years, good sheet metal, parts or restore, make offer; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

McCormick Deering I-4, turns over, good shape, $950. O-4 parting out: orchard belt pulley, shutters, plus misc. Rare ODS-6s orchard diesel engine free and 1 parts tractor, both for $1600 obo; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering OS4, 1948, parade quality, very good tires, $3000; Rod Hisken nnn-nnn-nnnn or nnn-nnn-nnnn (Oregon House CA)

Minneapolis Moline tractors: 1946 ZTU. 1947 U. Condition varies, best offer; Sean Moylan nnn-nnn-nnnn (Woodland CA)

Oliver 80, Wheatland, $1250; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Oliver 88, standard rears, good front, ran 3 or 4 years ago when parked in the shed, $1800; Jack Macki nnn-nnn-nnnn or xxxx@xxxx.xxx (Colville WA)

Oliver 88s, two unrestored “old style” tractors, one standard, one row crop, have been in storage and not run in last 20 years, your choice $4500 or $8000 for the pair, email for details or pictures; Ken Durrell nnn-nnn-nnnn or xxxx@xxxx.xxx (Eugene OR)

Oliver OC3/Cletrac HG crawlers parts, clutches, magnetos and starters, some cores, some rebuilt, grilles, hoods, fenders, etc. various prices depending on the part; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Oliver tractors: 60, 70, Hart Par 18-36; Charles Wallace nnn-nnn-nnnn (Toledo WA)

Power Horse A20, 1938, made in Salt Lake City, UT, $7200; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rims, 2 available, 12x36 inch, 2 rib rims, with tires (10-20%), $90 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Rims, 2 available, clamp on duals, 12x24 inch, one with no tire one with 14x24 inch tire (40%), $180 for the set obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Tires: 14.9x26 rear tires, about 75%, good rubber, $250 for the pair, pickup in Terra Bella CA or could haul to Turlock swap meet; Jim nnn-nnn-nnnn (Terra Bella CA)

Tires: matched pair of Goodyear 16.9x28 tires, about 25-30% tread left, $100 for the pair, pictures available; Ken Durrell nnn-nnn-nnnn or xxxx@xxxx.xxx (Eugene OR)

Titan 10-20, 1919 model, runs good, head rebuilt 10 years or so ago, lots of other money spent, reproduction fenders never installed, allowed to rust to match rest of tractor, no paint whatsoever, San Diego area, $10500; Brian Henderson nnn-nnn-nnnn (San Diego CA)

Wheel weight for 16 inch wheel, 2 halves to make 1 full; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Wheel weights for John Deere 40U; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Wheels, 10x26 from a John Deere H, 7 lug bolt holes, $30 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Wheels, 2 available, 12x36 inch, 9 lug bolts on 9.5-inch circle, no tires, $90 each obo; Larry Jacobson nnn-nnn-nnnn or nnn-nnn-nnnn (Salt Lake City UT)

Wheels: two that are 10x38, nine hole hubs, $40 each. One 11x38, FREE, needs repair; Hubert Bierly nnn-nnn-nnnn (Bend OR)