Aermotor 8 cylce, two on one cart (can be separated), one with magneto, one without, both run well, $2000 for all, call for breakdown; Ronald Shipman nnn-nnn-nnnn or nnn-nnn-nnnn (Kingsburg CA)
Alamo 9 hp, 1914, hopper cooled, flyball governor, large clutch pulley, Bettendorf wagon, older restoration, great looking engine, not too many this large, throttle governed, $5500 obo; Terry Christner nnn-nnn-nnnn no calls after 6pm (Molalla OR)
Bull Dog 2-1/2 hp, retagged as a Fairbanks Company, ignitor has weld, non original muffler, new needle valve and needs a fuel line, comes on a cart, $700, can crate and take to shipper of choice, shipping to be paid by buyer, planning on going to National Early Days Gas Engine show in Red Bluff in April, can deliver if paid for in advance; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Commercial 60 hp tank cooled engine made in Los Angeles CA in 1915. Only known 60 hp type C engine. It runs great and is easy to start with air. This impressive big engine is mounted on a 3 axle dedicated gooseneck trailer (CA license). Electric start gasoline air compressor for starting. 6 inch United pump (made in Oakland CA) is belted to the engine and can pump water for shows. Engine has been shown at several shows, complete unit is $11000, will sell engine separate for $8000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Cushman 4 hp, not stuck, $250; Tom nnn-nnn-nnnn (Ridgefield WA)
Cushman Binder engine, 1918?, Schebler carburetor, hot magneto, great compression with cooling tank on skid, $600 obo; Randy Frick nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angeles WA)
Economy 1-1/2 hp, 1 with a Webster magneto, 1 without a Webster, 1 stuck and 1 not, $250-$400; Tom nnn-nnn-nnnn (Ridgefield WA)
Economy S, 1-3/4 hp, 1924, EK magneto, hit and miss, on cart, runs, $600 obo; Randy Frick nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angeles WA)
Fairbanks Morse N, 20 hp, build date of Oct. 1910, engine runs and has been shown at the Great Oregon Steamup in Brooks OR, pictures on request, $18000; Gary Strausbaugh 503-3395061 or xxxx@xxxx.xxx (Salem OR)
Fairbanks Morse Z, 1-1/2 hp, headless, complete with magneto and mounted on original metal skid base, not stuck, but hasn’t run in a while, $325; Ray Bathrick nnn-nnn-nnnn (North Bend OR)
Fairbanks Morse, 3 hp, complete, Plugoscillator, $400; Tom nnn-nnn-nnnn (Ridgefield WA)
Field-Brundage Co, no tag, needs magneto and gas tank, no cart, $500, can crate and take to shipper of choice, shipping to be paid by buyer, planning on going to National Early Days Gas Engine show in Red Bluff in April, can deliver if paid for in advance; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Frisbie, 5-8 hp, 1916-24?, single cylinder, freshwater, 4 cycle engine, Ford Friction carburetor, double oiler, buzz coil battery, on skid, $900; Randy Frick nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angeles WA)
Fuller and Johnson engine on cart, hp unknown, 5.25 inch bore x 8 inch stroke, $1000; Ronald Shipman nnn-nnn-nnnn or nnn-nnn-nnnn (Kingsburg CA)
Fuller and Johnson NB, 3 hp, 1925/26?, hit and miss, EK magneto, bell shaped carburetor, bore sleeved, great compression, on cart, runs, $800; Randy Frick nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angeles WA)
International Titan 8 hp, 1913, screen cooled, on correct wagon, older restoration, nice collector engine, $8900 obo; Terry Christner nnn-nnn-nnnn no calls after 6pm (Molalla OR)
John Deere 1-1/2 hp, big brass tag, $600; Tom nnn-nnn-nnnn (Ridgefield WA)
MacLeod 1-3/4 hp, tag reads: MacLeod limited farm supplier, Winnipeg-Saskatoon, EK magneto, good compression, weld on magneto bracket, no cart, ran good at the show last year, $750, can crate and take to shipper of choice, shipping to be paid by buyer, planning on going to National Early Days Gas Engine show in Red Bluff in April, can deliver if paid for in advance; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
McCormick Deering M, 3 hp, stuck, has Wico EK magneto, needs some TLC, $250; Tom nnn-nnn-nnnn (Ridgefield WA)
McCormick Deering M, 6 hp, not stuck, need Wico EK magneto, $325; Tom nnn-nnn-nnnn (Ridgefield WA)
Monitor, upright, hooked up to hand pump on cart with tank etc. ready to show; Ronald Shipman nnn-nnn-nnnn or nnn-nnn-nnnn (Kingsburg CA)
New Sattley, 4 hp, 1925, EK magneto, new paint, missing speed control linkage, runs, on skid, $500 obo; Randy Frick nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angeles WA)
Novo 2-4 hp, hit and miss, runs good, in good condition, $400 obo; Norm Goodin nnn-nnn-nnnn (Port Angeles WA)
Novo KU 3x4, 3 hp, roller engine, has magneto, $350; Tom nnn-nnn-nnnn (Ridgefield WA)
Ottawa 2-1/2 hp, 1919 saw engine, round tank, hit and miss, no saw attachment, sleeved, great compression, Webster Tri-pol magneto, runs, on skid, $700; Randy Frick nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angeles WA)
Railroad speeder engine, 2 stroke model QBA, complete but with non original water tank, not running but not stuck, $225 obo; Larry Alvares nnn-nnn-nnnn or xxxx@xxxx.xxx (Flournoy CA)
Samson 10 hp, can be run on propane or gas, on iron wheel cart, has not been painted, $6000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Samson 4 hp, can run on propane or gas, on iron wheel cart, painted, $5000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Schmidt chill cylinder, 3 hp type H, SN X7597, 1907, buzz coil, $2800; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Stover 1 hp V, 1916-1920, coil battery, hit and miss, on skid, runs, Mitchell Lewis and Stavers tag, $700; Randy Frick nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angeles WA)
Stover 1 hp V, 1920, Webster Tri-pol magneto, hit and miss, Mitchell Lewis and Stavers, Portland OR tag, runs, on skid, $900; Randy Frick nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Angeles WA)
Stover CTs, 1 with a Wico and 1 without a Wico, parts or restore, $250-$300; Tom nnn-nnn-nnnn (Ridgefield WA)
West Coast gas 40 hp, made in San Diego CA, only one known, on a nice cart, engine weighs 8400 lbs. without cart, starts and runs well, 1 person can start it, email for pictures or video, not a cheap engine, serious replies only, best offer, possible part trade; Dan Barson nnn-nnn-nnnn or xxxx@xxxx.xxx (Mayer AZ)
Wisconsin V4 65 hp, runs but knocks, still has good oil pressure, electric start, selling as is, $750; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)