May 2019 - Engines & Parts For Sale

All Classified Ads

Novo DA332379, bore 3-1/4, stroke 4, runs good, looks new, $400 obo; D Duggan nnn-nnn-nnnn (Lake County CA)

Allman model engine from DeBolt castings, $1700; Mark Bruto nnn-nnn-nnnn (Placerville CA)

Alpha De Laval, 3 hp, early, rotary magneto, runs with cart, $950; Craig Mathews nnn-nnn-nnnn (Northridge CA)

Bamford, 2-1/2 hp, on original cart, very ornate and well built, made in England, #21562, runs great, rare in the US, $850; Bill Ramsden nnn-nnn-nnnn (Minden NV)

Bessemer, 20 hp, on steel skids, early (1900-1910), have run on gas carburetor, but should run on propane, very original, can still see original logo, correct oilers, etc. paid $4500, will sell for $2000; Bill Ramsden nnn-nnn-nnnn (Minden NV)

Brand new buzz coils, made with new original K-W electrics!! Wood mounting base supplied if wanted. Some want to hide their electricals and wouldn’t want a base. The quality is fantastic! $80; Tom Street nnn-nnn-nnnn or (Bend OR)

Bull dog engines: 2-1/2 hp, restored, $1500. 1-1/2 hp, restored, $1200. 1-1/2 hp engine, $1200. 6 hp engine, $2500. Photos on request; Bob Banke nnn-nnn-nnnn (McMinnville OR)

Commercial 60 hp tank cooled engine made in Los Angeles CA in 1915. Only known 60 hp type C engine. It runs great and is easy to start with air. This impressive big engine is mounted on a 3 axle dedicated gooseneck trailer (CA license). Electric start gasoline air compressor for starting. 6 inch United pump (made in Oakland CA) is belted to the engine and can pump water for shows. Engine has been shown at several shows, complete unit is $11000, will sell engine separate for $8000; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Cushman 4 hp, not stuck, $250; Tom nnn-nnn-nnnn (Ridgefield WA)

Cushman Binder engine, 1918?, Schebler carburetor, hot magneto, great compression with cooling tank on skid, $600 obo; Randy Frick nnn-nnn-nnnn or (Port Angeles WA)

Cushman C, 1-1/2 hp, headless, #34820, on cart with cooling tank and water pump, ran several years ago, but been stored since, not stuck, complete, $350; Bill Ramsden nnn-nnn-nnnn (Minden NV)

Economy S, 1-3/4 hp, 1924, EK magneto, hit and miss, on cart, runs, $600 obo; Randy Frick nnn-nnn-nnnn or (Port Angeles WA)

Economy, 7 hp, 1922, hit and miss, on drop center cart with steel wheels, looks good, runs good, $3500; Keith nnn-nnn-nnnn (Delta CO)

Fairbanks Morse N, 20 hp, build date of Oct. 1910, engine runs and has been shown at the Great Oregon Steamup in Brooks OR, pictures on request, $18000; Gary Strausbaugh 503-3395061 or (Salem OR)

Fairbanks Morse, 3 hp, complete, Plugoscillator, $400; Tom nnn-nnn-nnnn (Ridgefield WA)

Fairbanks? Skid mounted 2 cylinder engine, light plant engine only, radiator, carburetor, $100, leave message; Rob nnn-nnn-nnnn (Prineville OR)

Frisbie, 5-8 hp, 1916-24?, single cylinder, freshwater, 4 cycle engine, Ford Friction carburetor, double oiler, buzz coil battery, on skid, $900; Randy Frick nnn-nnn-nnnn or (Port Angeles WA)

Fuller and Johnson NB, 3 hp, 1925/26?, hit and miss, EK magneto, bell shaped carburetor, bore sleeved, great compression, on cart, runs, $800; Randy Frick nnn-nnn-nnnn or (Port Angeles WA)

Fuller and Johnson, 4 hp, complete, original and basically untouched, a survivor, runs nicely, $2300 obo; Lon Miller nnn-nnn-nnnn (Walla Walla WA)

Hercules Type FW, 1-1/2 hp, new fuel tank, Webster magneto, $750; Craig Mathews nnn-nnn-nnnn (Northridge CA)

Hercules, 2 hp, hit and miss, #337946, complete, not stuck, have run and ran good, stored for a few years, $375; Bill Ramsden nnn-nnn-nnnn (Minden NV)

Hercules, 3 hp, #230208, on original drop cart, complete and running, older restoration, $650; Bill Ramsden nnn-nnn-nnnn (Minden NV)

International Tom Thumb, air cooled, $800; Craig Mathews nnn-nnn-nnnn (Northridge CA)

John Deere 1-1/2 hp, big brass tag, $600; Tom nnn-nnn-nnnn (Ridgefield WA)

Maytag Model 92, two engines, one has spark, both turn freely, $300 for both; Mark Bruto nnn-nnn-nnnn (Placerville CA)

McCormick Deering M, 3 hp, stuck, has Wico EK magneto, needs some TLC, $250; Tom nnn-nnn-nnnn (Ridgefield WA)

McCormick Deering M, 6 hp, not stuck, need Wico EK magneto, $325; Tom nnn-nnn-nnnn (Ridgefield WA)

New Sattley, 4 hp, 1925, EK magneto, new paint, missing speed control linkage, runs, on skid, $500 obo; Randy Frick nnn-nnn-nnnn or (Port Angeles WA)

Novo KU 3x4, 3 hp, roller engine, has magneto, $350; Tom nnn-nnn-nnnn (Ridgefield WA)

Olds engines: 4-1/2 hp, restored engine with East Hope winch on cart, $5000. 6 hp restored engine, powder coated, $5000. Photos on request; Bob Banke nnn-nnn-nnnn (McMinnville OR)

Oshkosh, 4 hp, $2000. Photos on request; Bob Banke nnn-nnn-nnnn (McMinnville OR)

Ottawa 2-1/2 hp, 1919 saw engine, round tank, hit and miss, no saw attachment, sleeved, great compression, Webster Tri-pol magneto, runs, on skid, $700; Randy Frick nnn-nnn-nnnn or (Port Angeles WA)

Ottawa, 5 hp, single flywheel with dog clutch, #TE27596, complete, $400; Bill Ramsden nnn-nnn-nnnn (Minden NV)

Railroad speeder engine, 2 stroke model QBA, complete but with non original water tank, not running but not stuck, $225 obo; Larry Alvares nnn-nnn-nnnn or (Flournoy CA)

Samson 4 hp, can run on propane or gas, on iron wheel cart, painted, $5000; Wilbur Reil nnn-nnn-nnnn (Davis CA)

Schmidt chill cylinder, 1-1/2 hp type B, rare, 1908, $3200; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)

Schmidt chill cylinder, 3 hp type H, SN X7597, 1907, buzz coil, $2500; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)

Seager Olds Type 1B, 1-1/2 hp, original paint, decals and battery box, runs, $4000; Craig Mathews nnn-nnn-nnnn (Northridge CA)

Stover 1 hp V, 1916-1920, coil battery, hit and miss, on skid, runs, Mitchell Lewis and Stavers tag, $700; Randy Frick nnn-nnn-nnnn or (Port Angeles WA)

Stover 1 hp V, 1920, Webster Tri-pol magneto, hit and miss, Mitchell Lewis and Stavers, Portland OR tag, runs, on skid, $900; Randy Frick nnn-nnn-nnnn or (Port Angeles WA)

Stover CT-3, 3-3-1/2 hp, #EC25971, runs, good shape, been stored dry, $350; Bill Ramsden nnn-nnn-nnnn (Minden NV)

West Coast gas 40 hp, made in San Diego CA, only one known, on a nice cart, engine weighs 8400 lbs. without cart, starts and runs well, 1 person can start it, email for pictures or video, not a cheap engine, serious replies only, best offer, possible part trade; Dan Barson nnn-nnn-nnnn or (Mayer AZ)

Wisconsin 2 cylinder and V4s; Buck Evans nnn-nnn-nnnn (Greenville IL)

Wisconsin V4 65 hp, runs but knocks, still has good oil pressure, electric start, selling as is, $750; Joe Giordano nnn-nnn-nnnn or (Port Orchard WA)