May 2019 - Misc. For Sale

All Classified Ads

Allis Chalmers irrigation pump and engine on trailer. Rebuilt engine, but stuck from sitting, pump needs rebuilding, all for $500; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

Allis Chalmers model B sickle mower, belly mount, $100; Larry nnn-nnn-nnnn (Dexter OR)

Backhoe buckets, rear 12 inch digging bucket and front loader bucket (80 inch wide) for older Case 580 backhoe, $1500 for both or $750 each; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Baker Monitor wooden wheel windmill, 10 foot diameter wheel, restored, ready for a tower, can email photos; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)

Balers, International 47 balers, two available, lots of parts, $500 for both; Larry Severance nnn-nnn-nnnn (Dexter OR)

Band saw, small, made in USA, $100; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Belt buckles, John Deere, various different ones, what are you looking for; Carol nnn-nnn-nnnn (Keno OR)

Belt buckles, John Deere, various different ones, what are you looking for; Carol nnn-nnn-nnnn (Keno OR)

Black walnuts wash and clean, $3/lb, cracked $4/lb plus shipping; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Blade off a Caterpillar 22, no hoses or ram, $100. John Deere CC 8 foot cultivator, $100; Gary nnn-nnn-nnnn (Sheridan OR)

Boat, 1942 double ended Wellin steel life boat, 16’6” long, builder’s hull #105218 with clear Oregon title. Has two cylinder, 8 hp, Kermath marine engine and transmission, SN 8-10 20758. Engine has no breaks, cracks or welds and runs well. Comes with tandem axle tilt trailer, 3 speed winch, new master cylinder, spare tire and other extras. $1995; Jack Finzel nnn-nnn-nnnn or xxxx@xxxx.xxx (Veronia OR)

Bowser previsible gas pump, Model 102, circa 1905, all original except for the top globe, very unique, upper body locks/unlocks, slides up to expose the pump, has original wood handle and pump arm, also has brass tag, really neat looking pump, stands about 8 foot tall, and rises to 10 foot when upper part is slid up, displace as is or restore, real nice condition, came off apple orchard in central Washington where it spent all of its life, $1500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Briggs and Stratton 12-1/2 hp, 206cc, model 130292, type 1916-01, code 85011607, reduction engine, runs good, $150; D Duggan nnn-nnn-nnnn (Lake County CA)

Briggs and Stratton 3-1/2 model PW0821500, SN 717200218, $50; D Duggan nnn-nnn-nnnn (Lake County CA)

Buffalo Forge No. 21 drill press, has drill chuck, Morse taper adapter sleeve and large drills pictured that go with it, single phase, $500 obo; Lon Miller nnn-nnn-nnnn (Walla Walla WA)

Buffalo Industries Iron Hog, metal cutter, huge, very heavy, you haul, $1000; Carol nnn-nnn-nnnn (Keno OR)

Carts, two available, all steel, heavy duty, both in good condition, one has orchard sprayer mounted on it but it is well suited for a big (10 hp+) engine, $700; Smokey Stover nnn-nnn-nnnn or xxxx@xxxx.xxx (Sacramento CA)

Caterpillar tools and manuals. Fuel rack setting tools for Cat engines, $80. Cat service manuals including: D8 14A, D9 66A, powershift testing and adjusting, 933, DW10, 17000 Cat engine, C22 sales magazine, $40 each; Jim nnn-nnn-nnnn (Chicago Park CA)

Chipper/shredder, Troy Bilt Super Tomahawk, 8 hp, like new, $895; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Wilsonville OR)

Clark 4000 lb. forklifts, both have side shift, one single stage mast, one triple stage mast with free lift, both hard rubber tires, both run, miscellaneous oil leaks, $975 and $1575; Don Chappell nnn-nnn-nnnn (St Helens OR)

Corn planter, 1920s-1930s, John Deere two row, 3pt hitch, lost top cans, good shape, $400; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

Cultivator, Agric rotocultivator, new, used one hour, $1500; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Wilsonville OR)

Drill press, Walker Turner model 1113-41, 1 hp, 3 phase, 22”x19-1/2” table, 8 foot column by 3-3/4 inch column, 6 inch stroke, M3 spindle, 10 inch spindle to column, $800 or $850 with Jacobs chuck; Jack Finzel nnn-nnn-nnnn (Veronia OR)

Estate sale, 50 years of accumulation, D2 Caterpillar for parts, auto parts, tractor parts, Cat parts, Massey Harris tractor, Buffalo Iron Hog Pirana, chain saws, pole saw, generators, riding lawn mowers, 1980 Dodge flatbed (needs fuel pump), tools, collectibles, antiques, too much to list. Gate opens at 9 am, goes till 5 pm. May 17th-19th, Sunday 9-3. 12150 Overland Dr; Carol nnn-nnn-nnnn (Keno OR)

Fertilizer spreader, Barber 28 foot, folding type, four 12 inch tires, needs repair, $150; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Fire tanks, 5 available, Parco stainless steel backpack style (similar to Indian), 5 gallon tank, right hand lever operated in tank pump, been sitting and in various conditions, some are missing parts, $40 for the best one; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Athol ID)

Freeman full hydraulic front end loader with 66 inch wide bucket with removable teeth. Can fit most utility tractors in the 40 to 60 hp range. Uses tractor hydraulic system to operate, $1600 obo; John Lang nnn-nnn-nnnn (Monmouth OR)

Generator, Briggs and Stratton 9 hp, 233431, Dayton power plant model 1W832A, watts 3500, 60 hz, 208/120v- 1 phase-AC, runs good, makes good power, less than 100 hours run time; D Duggan nnn-nnn-nnnn (Lake County CA)

Grader, Caterpillar, 1920s, very good condition, brass tag, functional, everything works as it should, will fit on a car trailer, $1750; Larry nnn-nnn-nnnn (Phelan CA)

Grain mill, Hutchinson, crack corn or what have you. Tractor PTO driven, great shape and strongly built, $850 obo; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

Grist mill, Rumley, excellent condition, name and logo clear, $350; Bill Ramsden nnn-nnn-nnnn (Minden NV)

Hay rake, David Bradley, side delivery, 11 foot reel, total width is 9’9”, good shape, needs all 4 tires, would be ideal implement to pull in parade, will load on a 16 foot auto haul trailer, could deliver, picture on request; Bob Winters nnn-nnn-nnnn or xxxx@xxxx.xxx (Penn Valley CA)

Hay rake, vintage, $500 obo; Harold Ault nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Holt tilt blade off John Deere 420C, all mounting hardware, needs some work, $150. Also some 420C parts; Hans Strauss nnn-nnn-nnnn (Stevenson WA)

Honda 8 hp, GX240, H type, 1/2 reduction type PTO, new engine. $500; D Duggan nnn-nnn-nnnn (Lake County CA)

Hydraulic water ram, Johnson Hill Ram, 1-1/4 inch size, good condition, scarce maker, $595, email for pictures; Mel Miller nnn-nnn-nnnn (Castle Rock WA)

John Deere gauge wheel assembly with tire for 835 rollover plow, $50; Jason Alvarez nnn-nnn-nnnn (Turlock CA)

John Deere magazines, Two Cylinder 3 from 1993, 4 from 1996, 6 from 1997, 6 from 1998. Green Magazine 6 from 2000, 9 from 2001, 5 from 2002, Free to loving home; Bob Winters nnn-nnn-nnnn or xxxx@xxxx.xxx (Penn Valley CA)

Lathe parting out, Hardinge 2nd operation with turret and cross slide. Cross slide $150. Turret $800. SN 59-1167-2. Call for other parts, could use cabinet for bench top lathe; Jack Finzel nnn-nnn-nnnn or xxxx@xxxx.xxx (Veronia OR)

Loader frame with 7’x2’ blade from a McCormick Deering WD9, missing blade cylinder and control valve, $300, more pictures available; Gale Crenshaw nnn-nnn-nnnn (Olalla WA)

Loader, John Deere model 45, $500; Matt Little nnn-nnn-nnnn (Harrison ID)

Lubricator, have one that is half pint size, good glass and has sight glass and adjustment knob, $250; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Moline universal instruction book for models B and C, 1917, 9x6 hard cover, over all clean book, but a few pages missing, front intro and a couple of index pages, 179 pages, lots of pictures and diagrams, $45 includes shipping; Jim Gardner nnn-nnn-nnnn (Vernonia OR)

Mower conditioner, International Model 990, good parts, rollers and miscellaneous, $150; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Mower, John Deere No. 5, sickle bar 7 foot, set up for hydraulic cylinder, $200; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Peterbilt sleeper, 36 inch, installed custom wood door on opening and a steel forklift frame on the bottom, sleeper is great for single show exhibitor to camp out at a show, can be taken on/off your trailer with a forklift, takes up very little space and is light weight, lots of storage underneath bed to keep your stuff out of the weather, used to sleep in it at shows, but have family now so not used anymore, $500; Jason Alvarez nnn-nnn-nnnn (Turlock CA)

Plate clamps by Renfro, 2 available, for lifting up to 1 inch plate, 2 ton capacity, 1 model JPA, 1 model SM, $100 each; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Athol ID)

Plow, Allis Chalmers B single bottom, $200; Matt Little nnn-nnn-nnnn (Harrison ID)

Pump jacks, 2 available, very large deep well use. One is F.E. Meyers, $100 each, photos avalable; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Geyserville CA)

Rockwell Model 20 vertical metal cutting band saw, series 28-3X5, almost unused, includes selection of new blades, 3 phase, $1600 obo; Lon Miller nnn-nnn-nnnn (Walla Walla WA)

Sickle mower blades, John Deere No. 5, 7 bars, some teeth missing, but can be replaced from other bars, picture on request; Bob Winters nnn-nnn-nnnn or xxxx@xxxx.xxx (Penn Valley CA)

Sprayer on steel cart, has Hardi pump and large wooden tank in good condition, acquired it to use for big engine, but decided it was too good to dismantle, $800; Smokey Stover nnn-nnn-nnnn or xxxx@xxxx.xxx (Sacramento CA)

Spreader, metal spin, Euro Span S237L, 3pt, $275; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Wilsonville OR)

Sprinkler, Rain Birds, brass, probably 100 altogether of various sizes; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Athol ID)

Steel bins with skids, 4’x’4x2’, forkliftable and stackable, super handy for storage, scrap, you name it and they don’t rot like wood ones, 20+ available, $60 each; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Geyserville CA)

Steel tear drop shelving, have lots, $10 for heavy, $5 for light units, 8 foot lengths; Joe Keith nnn-nnn-nnnn (Hermiston OR)

Tiller, Howard Rotocadet, 6 foot, good condition, $1200; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Wilsonville OR)

Tractor manuals: John Deere technical and Caterpillar parts and service, let’s make a deal; Carol nnn-nnn-nnnn (Keno OR)

Trailer hitch adapter, 5th wheel to gooseneck, $150; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)

Trailer, flatbed, tilt, home built with 12,000 lb winch, two axles, $3800 obo. V10 wrecked Ford is parked on this trailer, maybe you can talk a great deal for both; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

Wagon, for rides, complete with 11 foot tongue and trees, 9’x3’ box, 7 foot long benches on each side, 6 foot overall width, 87 inch wheel base, needs a little TLC, but the kids love the wagon, $600; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Athol ID)

Water pump, Meyers Bulldozer, 6x6, 1923, has been repainted and inspected, largest one that they made, would make a great demonstration unit, pictures on request, $300; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Wrench display, Billings and Spencer, complete with many of the wrenches, wood with heavy steel pegs, sign at top with logo, metal tags at each set of pegs with wrench number on it, very cool display piece, $200; Richard Privat nnn-nnn-nnnn or xxxx@xxxx.xxx (Athol ID)