Allis Chalmers C, SN C67911, 1941, wide front, tin work complete but fair, tires weathered, engine stuck, missing steering wheel, make offer; Don Newton nnn-nnn-nnnn (San Miguel CA)
Allis Chalmers grille for B and for C, sold separately or together, make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
Allis Chalmers WD, SN WD133756, 1953, runs good, wide front, tin work complete, some rust on lower fenders, tires good tread, but weathered, $1000 obo; Dan Newton nnn-nnn-nnnn (San Miguel CA)
Allis Chalmers, two Bs and one CA, don’t have time to restore them, $450 takes all 3; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)
Avery A wide front, new front tires, stuck, $600; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)
Case 310 crawler dozer, factory hydraulic tilt blade, real good tracks, sprockets, etc., 5 roller undercarriage, gas engine, previous owner said transmission locked up and been sitting in dry garage for years, good looking machine, not all beat up, selling as is, not running, transmission needing work, rolls easily, $2700; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Case 4 cylinder magneto, $150, can deliver to Salem area free; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case C, S, D, CC, SC, DC, steel front wheels, manifolds, carburetors, magnetos, front weights, plus lots of parts. Case C, S or R F&H hc245 rear round spoke wheels 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DC4 with heart shaped front end, hand clutch, live PTO, hydraulics, Eagle hitch, runs, needs some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DV, like new tires, engine free, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case R sunburst grill, electric start, engine free, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case S front axle assembly, complete, wheels, wish bone, drag link, $100; Buck Evans nnn-nnn-nnnn (Greenville IL)
Case SC, 1950, adjustable wide front, has hydraulics, engine had valve job to head about 2 years ago, engine turned freely at that time, tires hold air, one good, other not so good, SN 5416586SC; Ken McDonald nnn-nnn-nnnn (Vancouver WA)
Case tractor parts and tractors for sale, parts for 30s to 60s models, engine parts, sheet metal, wheels, tires and projects, call with needs; Steve Stevenson nnn-nnn-nnnn (Medical Lake WA)
Case tractors: 1952 VAC, restored, good rubber, PTO, 3pt, 34 inch rear tires, runs good, $2500. 1948 DV (vineyard), 14.9x24 rear rubber, rear weights, 7.50x16 front tires, PTO and drawbar, excellent tin and straight fenders, $1000. Pictures available and delivery possible; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case V rear wheel weights, early model, $150 for the pair; Buck Evans nnn-nnn-nnnn (Greenville IL)
Case VA and VAC tractors, one parts tractor, one runner and one converted to a forklift that runs, $300-$1000 depending on the tractor; Chris Carl nnn-nnn-nnnn (Stanwood WA)
Case, 1936 wide tread, both rubber and steel wheels, $2900; Dave Gallant nnn-nnn-nnnn (Boring OR)
Cat D6 dozer, 194?, cable controls with rear winch and blade, pony motor start, grease gun and original manuals, runs, right brake not working well, $500 to a good home. Come to Tractor Days in Oregon House May 4-5 and arrange a viewing; Art Craigmill nnn-nnn-nnnn or xxxx@xxxx.xxx (Oregon House CA)
Caterpillar 10, 20 and 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar 22, one standard gauge, SN 2F2663, 1935. One wide gauge, SN 2F1389, 1934. Both engines turn, both have Be-Ge pumps for shop built blades, call for more pictures; Don Newton nnn-nnn-nnnn (San Miguel CA)
Caterpillar 22s: three total, have had all running, negotiable; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)
Caterpillar D2 5J series, wide gauge, runs good, unknown brand hydraulic bulldozer blade, undercarriage is fair, $1500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar D2 for parts, without blade, fairly complete, $2200; Carol nnn-nnn-nnnn (Keno OR)
Caterpillar D2 with blade, nice condition, $3500; Carol nnn-nnn-nnnn (Keno OR)
Caterpillar D2s: 5J9817 Traxcavator. 5U13624 orchard parts. J185 with blade. 5J9572 track crawler. $4800 for all; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)
Caterpillar D7 3T series, 1948, runs great, electric start pony that runs well, hydraulic assist steering and forward/reverse lever, undercarriage is good, grouser a little low, small oil leak on one final drive, radiator has a few small leaks that need fixing, no attachments/accessories, $4000 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar headlight with mesh cover, has dent on back, can email photos, $50; Carol nnn-nnn-nnnn (Keno OR)
Cletrac HG 42 parts, tracks, engine, Pacific Carr and Foundry winch, carburetors, magnetos, need to get rid of all because February snow storm damage to barn, $500; Larry nnn-nnn-nnnn (Dexter OR)
Cletrac HG crawler, 8 hole sprocket for early model, $150; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Cletrac Twin Row RC, front tires new, stuck, $600; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)
Earthmaster Model C, 1948, N62 Continental engine, good front and rear tires 80%, engine and hydraulics overhauled, new carburetor, very nice show tractor, runs good, new paint and decals, $1700 obo; M Beld nnn-nnn-nnnn call evenings (Lynden WA)
Farmall A, runs good, good restoration, straight sheet metal; Mike Wonsyld nnn-nnn-nnnn (Grants Pass OR)
Farmall Cub parts: one front wheel, $10. Two rear rims, $45 each. Two fenders, $40 each. One hood/gas tank, $40. One front axle, $50. One radiator, $30. One dash, instruments, $25; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall Cubs, three available, one has International belly mower, runs great. One has flat belt pulley, runs great. One has good parts, excellent engine, good tires. Call for prices; Don Chappell nnn-nnn-nnnn (St Helens OR)
Farmall Fast Hitch to 3pt adapter, $150. Sheet metal from A to 450 plus miscellaneous parts. Super M motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall H rear skeleton wheels with lugs, good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super C, 1954, 2pt Fast Hitch, C20 2-14 plow, International Windbreaker, drawbar, IH umbrella; Al Barkl nnn-nnn-nnnn (Twin Falls ID)
Ford 2000, excellent condition, everything is in good working condition, great for use on small acreage. Equipped with: power steering, rebuilt 3pt, drawbar, wheel weights front and rear, PTO, headlights and taillight, new tool box, live hydraulics, rear tires are excellent, front are in good condition, must see, cash only, $4700 obo; Bob nnn-nnn-nnnn (Roseville CA)
Ford 8N, 1952, new tin and tires, runs great, rear Ford blade, stored inside most of its life, $2150; Fred nnn-nnn-nnnn (Bandon OR)
Ford 8Ns, three to choose from, 48, 49 and 50. 49 is an older restoration. 48 and 50 are very recent. All start easy and run very well, all 6V systems. Also have many new and used 8N parts. Downsizing, need to liquidate; Rick Murray nnn-nnn-nnnn (Klamath Falls OR)
Ford 9N, 1940, complete unit, has: Howard Rotovator, Howard gear reduction, Sherman Step Up/Step Down transmission, everything operational, sell together or individual components; Fred nnn-nnn-nnnn (Bandon OR)
Ford Industrial 532, 56 hp, diesel, runs good, PTO and draw bar hitch only, no 3pt or hydrologic, $2500; Aaron nnn-nnn-nnnn – corrected phone number – (Walnut Grove CA)
Ford, 1953, Golden Jubilee, excellent condition, show or parade ready, beautiful tractor, $6500; Monda nnn-nnn-nnnn (Lake Havasu City AZ)
Fordson Major, 1954, diesel, heavy duty Wagner loader, front drive loader pump, good front and rear rubber, heavy duty swinging drawbar, cat 2 3pt arms, PTO, 2 rams on heavy duty bucket, good rear brakes, good runner, $4000 obo; Bud nnn-nnn-nnnn (Grants Pass OR)
International 350 Hi-Utility fast hitch, one remote, runs, needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International I6, 1942, tires are fair, barn fresh, original color was military grey, now it’s multicolored, runs good, clutch is slightly sticky, unusual rear hubs and tires, rear tires are 13.6x24, military hitch, hood and grille good, been driven in a parade, unique and one of a kind, just clean and paint, $600; Wilbur Reil nnn-nnn-nnnn (Davis CA)
International TD6, orchard, tracks and under carriage excellent, runs well, steering clutch rebuilt, brakes relined, much restoration and paint done, $3000; Milton Nichols nnn-nnn-nnnn (Red Bluff CA)
International W9 or WD9 NOS belt pulley, part #59133-D, can email photos, $150; Dan Tombrink nnn-nnn-nnnn (Columbia Falls MT)
John Deere 40C, 1954, rebuilt engine, great undercarriage, left friction needs attention, $3500 obo; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)
John Deere 420 dozer, hydraulic tilt blade, has very good 4 roller undercarriage, ROPS, 5 speed tranny with auxiliary reverser (doesn’t work properly, doesn’t want to go into gear, therefore not allowing main transmission into gear), previous owner said main transmission seemed fine, real nice machine, motor sounds good with good oil pressure, blade built to hydraulically tilt by previous owner, seemed to work fine, selling as is, can load or ship, $2900; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420C with dozer in shop now; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere 420C, interesting blade, challenging condition, $500 obo; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)
John Deere 440I gasoline wheel tractor with Blackwelder forklift. Extensive mechanical work completed and it runs great, all forklift functions (tilt, lift and side shift) work. Decent tires and sheet metal is good, it is ready for your paint job. I have the original Blackwelder manuals as well as copies of the 440 manuals. $6000, email for photos; John Boehm nnn-nnn-nnnn leave message or email (preferred) xxxx@xxxx.xxx (Woodland CA)
John Deere 60 wide front, runs good, good restoration; Mike Wonsyld nnn-nnn-nnnn (Grants Pass OR)
John Deere 820 or 820 hitch, $450 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26 inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30 inch wheel cast centers, part # F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A, Johnny Popper, needs battery, $2000; Carol nnn-nnn-nnnn (Keno OR)
John Deere B, 1947, single front wheel, restored with new tires and paint, starts and runs great, show or parade ready, $3500 obo; Floyd Ragsdale nnn-nnn-nnnn or xxxx@xxxx.xxx (Sun Valley NV)
John Deere B, single front, fair condition, ran it several years ago and been stored dry ever since, easy restoration or run it as is, $800; Bill Ramsden nnn-nnn-nnnn (Minden NV)
John Deere BO, 1944, recently refurbished, new tires, hood and fenders, runs great, excellent paint, $3800; Bob Johnson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cedarville CA)
John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere D, styled, stuck, cheap, $975; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $3000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere H, 1940, in excellent condition, electric start, new rear tires, front good, parade ready, new paint and decals, runs and starts good, $1900 obo; M Beld nnn-nnn-nnnn call evenings (Lynden WA)
John Deere LA, 1941, no tag, nice tractor, $2000; Hans Strauss nnn-nnn-nnnn (Stevenson WA)
John Deere LA, no tag, new valves, smokes a little, good rubber, $2000; Jim nnn-nnn-nnnn (Santa Barbara CA)
John Deere M, 1951, parade unit. Older restoration, recently touched up, professionally painted hood and grille with new decals, new gauges and front tires, rears are very good, gas tank cleaned and sealed, carburetor overhauled, 12V conversion with small alternator, stars and runs very well. Included is a JD 1064 hay wagon, completely restored and beautiful, new decal set, side racks and fold up rear steps, $3900 for both; Rick Murray nnn-nnn-nnnn (Klamath Falls OR)
John Deere MC, 1950, excellent condition, can text pictures, leave message and will get right back; Travis Hockel nnn-nnn-nnnn (Sprague River OR)
John Deere MC, 1954, rebuilt engine, great undercarriage, left friction needs attention, $3500 obo; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)
John Deere two cylinder magnetos, several different used magnetos, $60 each; Mark Bruto nnn-nnn-nnnn or xxxx@xxxx.xxx (Placerville CA)
John Deere unstyled live hydraulic system, mounts above flywheel, $150; Buck Evans nnn-nnn-nnnn (Greenville IL)
John Deeres: 1937 D, $2500. 1950 AN, runs, $1250. 1939 B, stuck, $750. 1950 B with live hydraulic pump, Roll-O-Matic front, runs, $1500. 1937 A, electric start conversion, new 36 inch rear tires, older restoration, runs very well, $3500. 1940 AN with round spoke rears, electric start conversion, new rear tires, $2500. 1946 BN, engine loose, $900; Chris Carl nnn-nnn-nnnn (Stanwood WA)
Massey 65, parting out, gas, good engine, etc; Buck Evans nnn-nnn-nnnn (Greenville IL)
Massey Ferguson equipped with log splitter, works with PTO, $2300, can email photos; Carol nnn-nnn-nnnn (Keno OR)
McCormick Deering OS 6, tires are shot, no magneto, engine stuck, parts tractor, if you load and haul, it’s FREE; Wilbur Reil nnn-nnn-nnnn (Davis CA)
McCormick Deering WD9 front hydraulic pump with mount and drive, also has front protection cover, more pictures available, $500; Gale Crenshaw nnn-nnn-nnnn (Olalla WA)
McCormick Deering WK-40, full steel, original engine free, $4000. I4, turns over, good shape, $950. O4, parting out, orchard belt pulley, shutters, plus miscellaneous RARE ODS-6s orchard diesel engine free and 1 parts tractor, both for $1600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Minneapolis Moline BF wide front, new front tires, stuck, $600; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)
Oliver 1755 High Crop, diesel, runs good, 3pt and PTO, $10000; Aaron nnn-nnn-nnnn (Walnut Grove CA)
Oliver 3pt hitch, heavy duty, factory made, fits 77-880 tractors, frame mount so draw bar is retained, complete except lift arms, really hard to find; Ron Hunter nnn-nnn-nnnn (Puyallup WA)
Oliver 70 parts: flat band front steel wheels, row crop wide front knees, belt pulley, manifold and miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 77 Waukesha diesel intake and exhaust manifold. Also, 88 diesel exhaust manifold. Bolt on condition, can include gasket set on request. Call or email for price; Ray Chrispens nnn-nnn-nnnn or xxxx@xxxx.xxx (Terra Bella CA)
Oliver 77, 1949, SN 321707, not running, with front side panels, tires bad, needs restoration, $375; Ken McDonald nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
Oliver 77, diesel, runs good, needs tires, $1000; Marsh Solomon nnn-nnn-nnnn (Aguanga CA)
Oliver OC3 or Cletrac HG, nice original side curtains and grille, $350; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Rims: 32 inch Oliver rear rim, 9 hole center, $75. One 38 inch Oliver rim, 9 hole center, $75, can deliver to Salem area free; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Starter motors and generators, pile of more than 20 old starter and generators, make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
Starters and magnetos, many to choose from, from core to rebuilt, $75 to $200 each; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Tire: Firestone, 420mmx 24 inch tubeless, new on Kubota rims, make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
Tires: one 12.4x28, 25% rubber, $50. One 11x38, 12.4x38, old style tread, older, but not weather, good tread, $100 can deliver to Salem area free; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Tires: set of Firestone Field and Road, 12.4x38 on rims for A, B, G, $600 for set. One 12.4x56 tire, like new, $250. Two 12.4x38 tires, decent shape, came off John Deere 530, rims are bad, have had fluid in them, $400 for set on rims; Chis Carl nnn-nnn-nnnn (Stanwood WA)
Titan 10-20, 1917, Model TV7158, has been stored inside, all original parts, good condition, price reduced to $15500 obo; Ray Jefferies nnn-nnn-nnnn (Palouse WA)
Wallis 20-30, 1929 orchard model, #62114, on steel, made by Massey Harris, older restoration and was running before stored in Idaho, complete and loose, $1500; Bill Ramsden nnn-nnn-nnnn (Minden NV)
Wehr, 1920’s one man grader, rare find runs and grades, history of early road construction (owned by public works), then building local airport, history verifiable. Search for photos with keywords of Fordson Wehr Grader. Video at https://youtu.be/C00BliMFiu0, $10000, negotiable; Buck Snyder nnn-nnn-nnnn or xxxx@xxxx.xxx (Bremerton WA)