Alamo Blueline, 9 hp, 1913, hit and miss, flyball governor, large clutch pulley, Bettendorf wagon, great display engine, $5100 obo; Terry Christner nnn-nnn-nnnn No calls after 6PM (Molalla OR)
Alamo, 2-1/2 hp, 1920, SN 66894 embossed on front of water tender, fully restored, burgundy color, on a two wheel metal cart that isn’t original, $1200 or trade towards John Deere 3 hp; Dean nnn-nnn-nnnn (Watsonville CA)
Allman model engine from DeBolt castings, $1700; Mark Bruto nnn-nnn-nnnn (Placerville CA)
Alpha De Laval, 3 hp, early, rotary magneto, runs with cart, $950; Craig Mathews nnn-nnn-nnnn (Northridge CA)
Arco, 2 hp, 1923, completely restored and running, built by Hercules for Bean Spray rig, has hopper cover and shroud for crank, comes with extra Wico magneto, on a cart, comes with Lunkenheimer Crown swing top oiler and two other oilers. Also included is small Buffalo Forge fan and small water pump circulator for display. Have a short video of it running that can be sent by email with photos, all for $1750; Bill Sommers nnn-nnn-nnnn (Auburn CA)
Associated 6 Mule Team, 6 hp, buzz saw complete, runs, saws! On steel wheels, haul it on car trailer, pictures by email to serious interest, $3000; Tom Street nnn-nnn-nnnn (Bend OR)
Atlas, 2 cylinder upright, 1 cylinder is engine other is air compressor, all complete with magneto, brass tank and carburetor, exposed push rod and valve springs, haven’t run in a while, stored inside, $450; Ray Bathrick nnn-nnn-nnnn (North Bend OR)
Bamford, 2-1/2 hp, on original cart, very ornate and well built, made in England, #21562, runs great, rare in the US, $850; Bill Ramsden nnn-nnn-nnnn (Minden NV)
Bessemer, 20 hp, on steel skids, early (1900-1910), have run on gas carburetor, but should run on propane, very original, can still see original logo, correct oilers, etc. paid $4500, will sell for $2000; Bill Ramsden nnn-nnn-nnnn (Minden NV)
Brand new buzz coils, made with new original K-W electrics!! Wood mounting base supplied if wanted. Some want to hide their electricals and wouldn’t want a base. The quality is fantastic! $80; Tom Street nnn-nnn-nnnn or xxxx@xxxx.xxx (Bend OR)
Bull dog engines: 2-1/2 hp, restored, $1500. 1-1/2 hp, restored, $1200. 1-1/2 hp engine, $1200. 6 hp engine, $2500. Photos on request; Bob Banke nnn-nnn-nnnn (McMinnville OR)
Casting kit and blueprints to build Joe Tochtrop model Economy engine. Flywheels and pulley are cast iron, rest is aluminum. Builds a model with 6-3/8 inch flywheels, weighs 12 lbs., $180; Dave nnn-nnn-nnnn (Bothell WA)
Cushman C, 1-1/2 hp, headless, #34820, on cart with cooling tank and water pump, ran several years ago, but been stored since, not stuck, complete, $350; Bill Ramsden nnn-nnn-nnnn (Minden NV)
Cushman, 4 hp, flywheel on 1 side, clutch on the other, complete, never run, $300; Ray Bathrick nnn-nnn-nnnn (North Bend OR)
DeLaval, 1-1/2 hp, powers Jensen Bros. oil pump, comes with trailer, $1800; George Moore nnn-nnn-nnnn or xxxx@xxxx.xxx (Portland OR)
Economy, 7 hp, 1922, hit and miss, on drop center cart with steel wheels, looks good, runs good, $3500; Keith nnn-nnn-nnnn (Delta CO)
Engine cylinder, over 10 inch bore, maybe Charter or Fairbanks, $200 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
Fairbanks Morse cast iron base for engine and compressor or pump, $200 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
Fairbanks Morse, 15 hp, 1927, tank cooled engine, cannon style, throttle governed, on I-beam skids, $3200 obo; Terry Christner nnn-nnn-nnnn No calls after 6PM (Molalla OR)
Fairbanks? Skid mounted 2 cylinder engine, light plant engine only, radiator, carburetor, $100, leave message; Rob nnn-nnn-nnnn (Prineville OR)
Fairmont QBA single cylinder two stroke from railroad speeder, complete but with non original water tank, not stuck, hasn’t been run in a long time, stored inside for years, $200; Larry Alvares nnn-nnn-nnnn or xxxx@xxxx.xxx (Flournoy CA)
Fuller and Johnson, 4 hp, complete, original and basically untouched, a survivor, runs nicely, $2300 obo; Lon Miller nnn-nnn-nnnn (Walla Walla WA)
Hardy, 12 hp, 190c marine diesel engine, $150; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)
Hercules Type FW, 1-1/2 hp, new fuel tank, Webster magneto, $750; Craig Mathews nnn-nnn-nnnn (Northridge CA)
Hercules, 2 hp, hit and miss, #337946, complete, not stuck, have run and ran good, stored for a few years, $375; Bill Ramsden nnn-nnn-nnnn (Minden NV)
Hercules, 3 hp, #230208, on original drop cart, complete and running, older restoration, $650; Bill Ramsden nnn-nnn-nnnn (Minden NV)
International LB, very good condition, runs good, wheelbarrow cart, red, $325; Steven Hales nnn-nnn-nnnn or xxxx@xxxx.xxx (Fruitland ID)
International Tom Thumb, air cooled, $800; Craig Mathews nnn-nnn-nnnn (Northridge CA)
John Deere 1-1/2 hp, runs good, partial paint, $495; Steven Hales nnn-nnn-nnnn or xxxx@xxxx.xxx (Fruitland ID)
Lister 3 cylinder diesel, $500; Marsh Solomon nnn-nnn-nnnn (Aguanga CA)
Maytag Model 92, two engines, one has spark, both turn freely, $300 for both; Mark Bruto nnn-nnn-nnnn (Placerville CA)
McCormick Deering, 2-1/2 hp, loose, no magneto, $225; Chris Carl nnn-nnn-nnnn (Stanwood WA)
Nelson Brothers Little Jumbo, 1-3/4 hp, mostly complete, no igniter but bracket is there, not stuck, good project for someone, $175 obo; Ray Bathrick nnn-nnn-nnnn (North Bend OR)
Novo DA332379, bore 3-1/4, stroke 4, runs good, looks new, $400 obo; D Duggan nnn-nnn-nnnn (Lake County CA)
Olds engines: 4-1/2 hp, restored engine with East Hope winch on cart, $5000. 6 hp restored engine, powder coated, $5000. Photos on request; Bob Banke nnn-nnn-nnnn (McMinnville OR)
Oshkosh, 4 hp, $2000. Photos on request; Bob Banke nnn-nnn-nnnn (McMinnville OR)
Ottawa, 5 hp, single flywheel with dog clutch, #TE27596, complete, $400; Bill Ramsden nnn-nnn-nnnn (Minden NV)
Samson, 4 hp, can run on propane or gas, on iron wheel cart, painted, $5000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Samson, 6 hp, on iron wheel cart, painted, runs on gas, been shown many times, $6000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Schmidt chill cylinder, 1-1/2 hp type B, rare, 1908, $3200; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Schmidt chill cylinder, 3 hp type H, SN X7597, 1907, buzz coil, $2500; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Seager Olds Type 1B, 1-1/2 hp, original paint, decals and battery box, runs, $4000; Craig Mathews nnn-nnn-nnnn (Northridge CA)
Stover CT-3, 3-3-1/2 hp, #EC25971, runs, good shape, been stored dry, $350; Bill Ramsden nnn-nnn-nnnn (Minden NV)
Wisconsin 2 cylinder and V4s; Buck Evans nnn-nnn-nnnn (Greenville IL)
Wisconsin one cylinder engine, $100 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)