July 2019 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers B, 1939, restoration started, but never finished, hand start, engine is loose, comes with parts tractor and sickle bar mower. Grandpa’s new bride says get rid of that stuff. Can assist with loading most any time, $400. At this price you get all the “Old Allis News” magazines grandpa has too; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)

Allis Chalmers C, SN C67911, 1941, wide front, tin work complete but fair, tires weathered, engine stuck, missing steering wheel, make offer; Don Newton nnn-nnn-nnnn (San Miguel CA)

Allis Chalmers grille for B and for C, sold separately or together, make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

Allis Chalmers HD3 injector pump, crankshaft and miscellaneous parts, make offer; Phil nnn-nnn-nnnn (Redmond OR)

Allis Chalmers motor grader DD, complete, will restore; Marsh nnn-nnn-nnnn (Aguanga CA)

Allis Chalmers WD, SN WD133756, 1953, runs good, wide front, tin work complete, some rust on lower fenders, tires good tread, but weathered, $1000 obo; Dan Newton nnn-nnn-nnnn (San Miguel CA)

Allis Chalmers, two Bs and one CA, don’t have time to restore them, $450 takes all 3; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

Case 4 cylinder magneto, $150, can deliver to Salem area free; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Case C, S, D, CC, SC, DC, steel front wheels, manifolds, carburetors, magnetos, front weights, plus lots of parts. Case C, S or R F&H hc245 rear round spoke wheels 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case CC, 1938, runs good, hand start, has good sheet metal, fair tires, easy restoration, hard to find this rare model, pictures on request, $600; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)

Case DC4 with heart shaped front end, hand clutch, live PTO, hydraulics, Eagle hitch, runs, needs some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case DV, 1948, good rear 14.9x26 rear tires, 7.50x16 front tires, 540 PTO, belt pulley, swinging drawbar, new battery, rebuilt carburetor, brakes work good, very straight tin, no dents in rear fenders, runs very good, $1800; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Case DV, like new tires, engine free, $750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case R sunburst grill, electric start, engine free, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case tractor parts and tractors for sale, parts for 30s to 60s models, engine parts, sheet metal, wheels, tires and projects, call with needs; Steve Stevenson nnn-nnn-nnnn (Medical Lake WA)

Case tractors: 1952 VAC, restored, good rubber, PTO, 3pt, 34 inch rear tires, runs good, $2500. 1948 DV (vineyard), 14.9x24 rear rubber, rear weights, 7.50x16 front tires, PTO and drawbar, excellent tin and straight fenders, $1000. Pictures available and delivery possible; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Case VA and VAC tractors, one parts tractor, one runner and one converted to a forklift that runs, $300-$1000 depending on the tractor; Chris Carl nnn-nnn-nnnn (Stanwood WA)

Case VAC front tires and rims, $40, delivery possible; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Case VAC parts: grille, hood, side panels, floorboards, fuel tank, rear 28 inch cast center, steering column, manifold, belt pulley complete minus miscellaneous items; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Case, 1936 wide tread, both rubber and steel wheels, $2900; Dave Gallant nnn-nnn-nnnn (Boring OR)

Caterpillar 22s: three total, have had all running, negotiable; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)

Caterpillar D2 5J series, wide gauge, runs good, unknown brand hydraulic bulldozer blade, undercarriage is fair, $1500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Caterpillar D2s: 5J9817 Traxcavator. 5U13624 orchard parts. J185 with blade. 5J9572 track crawler. $4800 for all; Dan Kattenhorn nnn-nnn-nnnn (Applegate CA)

Caterpillar D7 3T series, 1948, runs great, electric start pony that runs well, hydraulic assist steering and forward/reverse lever, undercarriage is good, grouser a little low, small oil leak on one final drive, radiator has a few small leaks that need fixing, no attachments/accessories, $4000 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)

Cletrac HG 42 parts, tracks, engine, Pacific Carr and Foundry winch, carburetors, magnetos, need to get rid of all because February snow storm damage to barn, $500; Larry nnn-nnn-nnnn (Dexter OR)

Farmall A, runs good, good restoration, straight sheet metal; Mike Wonsyld nnn-nnn-nnnn (Grants Pass OR)

Farmall Cub parts: one front wheel, $10. Two rear rims, $45 each. Two fenders, $40 each. One hood/gas tank, $40. One front axle, $50. One radiator, $30. One dash, instruments, $25; Wendell Newman nnn-nnn-nnnn (Carson City NV)

Farmall Fast Hitch to 3pt adapter, $150. Sheet metal from A to 450 plus miscellaneous parts. Super M motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall H rear skeleton wheels with lugs, good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall M, 1947, narrow front, good sheet metal, good rubber, starts easy, $2950; Dan Miller nnn-nnn-nnnn (Rochester WA)

Farmall Super C, 1954, 2pt Fast Hitch, C20 2-14 plow, International Windbreaker, drawbar, IH umbrella; Al Barkl nnn-nnn-nnnn (Twin Falls ID)

Farmall Super C, 1954, Fast Hitch, C-20 2B 2-14 Fast Hitch plow, International Windbreaker, excellent running tractor; Al Barkl nnn-nnn-nnnn (Hazelton ID)

Ford 2000, excellent condition, everything is in good working condition, great for use on small acreage. Equipped with: power steering, rebuilt 3pt, drawbar, wheel weights front and rear, PTO, headlights and taillight, new tool box, live hydraulics, rear tires are excellent, front are in good condition, must see, cash only, $4700 obo; Bob nnn-nnn-nnnn (Roseville CA)

Ford 860 tractor, new brakes, hydraulic rebuilt, real good tractor, $4200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 8N pair of rear 28 inch rear rims with centers, very good condition, also fit other models, $195. Two pairs of 19 inch front wheels with tires that are weathered, $50 per pair. Many miscellaneous 8N parts, would make a good deal if they took all; Lee DeVries nnn-nnn-nnnn (Crawfordsville OR)

Ford 8N, 1949, runs good, includes back blade and Ford mower, $2250; nnn-nnn-nnnn (Tacoma WA)

Ford 8N, 1952, good tin, remote hydraulic, over running clutch on PTO, tire chains, 12V with fresh rebuilt alternator and starter, new exhaust, heavy duty trailer hitch, rear work light, front bumper with suitcase weights, Sherman step up and Howard reduction gear, engine very tired, weather checked tires hold air, can email photos, $1000; Jerry Loeffelbein nnn-nnn-nnnn (Cashmere WA)

Ford 8N, 1952, new tin and tires, runs great, rear Ford blade, stored inside most of its life, $2150; Fred nnn-nnn-nnnn (Bandon OR)

Ford 8N, rebuilt tractor, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford 9N, 1940, complete unit, has: Howard Rotovator, Howard gear reduction, Sherman Step Up/Step Down transmission, everything operational, sell together or individual components; Fred nnn-nnn-nnnn (Bandon OR)

Ford 9N-2N parts, NOS, one piston 9N530B, hydraulic lift, 39-52, $37.50. Two piston ring set, 9N675 for hydraulic lifts, $18, 39-52. Two small bolt axle rear retainer assembly with cup, 9N4124, 39-47. 9N hood, 39-46, $250. 9N grille, 39-46, $75; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford NAA, 1953, $3200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford parts: exhaust manifold for NAA. Three victor 49999 axle seals, wheel seal small bolt housing, $20, 39-47. 10 gaskets, 8N4225, $3 each, cork axle shaft. 9N-2N rear axle housing, $450, 39-47; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ford tractor parts: two EAF-10145 (53) generation belt adjuster. One axle, 600 & 800 part on 4244, $175. Two 86900100 o ring, 860 hydraulic lift piston, $6. One ANCA473A ring hydraulic lift cylinder, cork, for 860, $8. Diesel vertical exhaust kit 311933 and part 55258, 1958. Long block 8N321987, 1950, machine shop rebuild, $1500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Fordson Major, 1954, diesel, heavy duty Wagner loader, front drive loader pump, good front and rear rubber, heavy duty swinging drawbar, cat 2 3pt arms, PTO, 2 rams on heavy duty bucket, good rear brakes, good runner, $4000 obo; Bud nnn-nnn-nnnn (Grants Pass OR)

International 300 utility with McCormick hydraulic loader with 72 inch bucket, 1956, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

International 3200 skid steer hydraulic parts, lift rams, drive pumps, lots of miscellaneous including a V4 Wisconsin, take all for $650; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

International 350 Hi-Utility fast hitch, one remote, runs, needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

International I6, 1942, tires are fair, barn fresh, original color was military grey, now it’s multicolored, runs good, clutch is slightly sticky, unusual rear hubs and tires, rear tires are 13.6x24, military hitch, hood and grille good, been driven in a parade, unique and one of a kind, just clean and paint, $600; Wilbur Reil nnn-nnn-nnnn (Davis CA)

International TD6, orchard, tracks and under carriage excellent, runs well, steering clutch rebuilt, brakes relined, much restoration and paint done, $3000; Milton Nichols nnn-nnn-nnnn (Red Bluff CA)

John Deere 1010 utility, rear exhaust, runs good, $3500; David nnn-nnn-nnnn (Spokane WA)

John Deere 420 utility, all green/phase one, runs good, $2700; David nnn-nnn-nnnn (Spokane WA)

John Deere 420C, interesting blade, challenging condition, $500 obo; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)

John Deere 420W, starts easily, runs and drives well, very good mechanical condition, sheet metal, transmission, wheels and tires are all very good, hydraulics, 3pt hitch and PTO work as they should, engine overhauled about 10 years ago and about 150 hours since then, big bonus of factory power steering, makes it very easy to drive, $3400 email for photos/video; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 440I, gas wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt, side shift) work, decent tires and sheet metal is good, ready for your paint job, original Blackwelder manual and copies of the 440 manuals, $5500, email for photos/video; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 60 wide front, runs good, good restoration; Mike Wonsyld nnn-nnn-nnnn (Grants Pass OR)

John Deere 820 or 820 hitch, $450 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26 inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30 inch wheel cast centers, part # F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere B, 1947, single front wheel, restored with new tires and paint, starts and runs great, show or parade ready, $3500 obo; Floyd Ragsdale nnn-nnn-nnnn or xxxx@xxxx.xxx (Sun Valley NV)

John Deere BI, 1937, restored, new pistons, rings, rods and clutch, plus much more. Transmission is perfect. Sandblasted, primed and painted with correct JD color, call with questions, $7999; John nnn-nnn-nnnn (Medford OR)

John Deere BO Lindeman crawler, 1943, overhauled engine, $5000. JD D, 1948, running original condition, $2500. Call for pictures and details; Merv Johnson nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d’Alene ID)

John Deere BO, 1944, recently refurbished, new tires, hood and fenders, runs great, excellent paint, $3800; Bob Johnson nnn-nnn-nnnn or xxxx@xxxx.xxx (Cedarville CA)

John Deere BWH, 1946, on spoke rear wheels, rough but the real thing with confirmed SN search documents, only 280 of this model made, $1950, email for photos/video; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere D turning brakes, complete system with brakes, wheel hubs, main case and serial tag, $450 email for photos; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $3000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere M, 1951, very good original condition, complete, starts easily, runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2400 email for photos/video; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere MC, 1950, excellent condition, can text pictures, leave message and will get right back; Travis Hockel nnn-nnn-nnnn (Sprague River OR)

John Deere MC, 1954, rebuilt engine, great undercarriage, left friction needs attention, $3500 obo; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

John Deere Rs, two available, don’t run, one has factory cab minus rear doors, $1800 for both; David nnn-nnn-nnnn (Spokane WA)

John Deere styled G, just parted two complete tractors, most parts available, still putting parts on the website, if you don’t see what you need, ask; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deeres: 1937 D, $2500. 1950 AN, runs, $1250. 1939 B, stuck, $750. 1950 B with live hydraulic pump, Roll-O-Matic front, runs, $1500. 1937 A, electric start conversion, new 36 inch rear tires, older restoration, runs very well, $3500. 1940 AN with round spoke rears, electric start conversion, new rear tires, $2500. 1946 BN, engine loose, $900; Chris Carl nnn-nnn-nnnn (Stanwood WA)

Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

McCormick Deering OS 6, tires are shot, no magneto, engine stuck, parts tractor, if you load and haul, it’s FREE; Wilbur Reil nnn-nnn-nnnn (Davis CA)

McCormick Deering WK-40, full steel, original engine free, $4000. I4, turns over, good shape, $950. O4, parting out, orchard belt pulley, shutters, plus miscellaneous RARE ODS-6s orchard diesel engine free and 1 parts tractor, both for $1600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals, rear main seal leak, can send pictures, $4450 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline GVI, diesel, 1960, 68 hp, 540 PTO, 213.1-26 rears, 7.50-18 fronts, cab with all glass, good sheet metal, 2 remotes, with 9 foot Cancade hydraulic two way front blade, will sell with or without blade, blade available separately, can send pictures, $4450 with blade obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline UTU, 1946, restorable or for parts, never had it running, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline Z parts tractor, can send pictures, $250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Oliver 10x38 inch rear wheel, 9 bolt pattern, nice rim. 32x8 inch Oliver wheel, little rust, $30. Oliver/Cockshut rear wheel weights; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Oliver 3pt hitch, heavy duty, factory made, fits 77-880 tractors, frame mount so draw bar is retained, complete except lift arms, really hard to find; Ron Hunter nnn-nnn-nnnn (Puyallup WA)

Oliver 70 parts: flat band front steel wheels, row crop wide front knees, belt pulley, manifold and miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver 77 Waukesha diesel intake and exhaust manifold. Also, 88 diesel exhaust manifold. Bolt on condition, can include gasket set on request. Call or email for price; Ray Chrispens nnn-nnn-nnnn or xxxx@xxxx.xxx (Terra Bella CA)

Oliver 77, diesel, runs good, needs tires, $1000; Marsh Solomon nnn-nnn-nnnn (Aguanga CA)

Oliver 88 hi crop, wide front, good sheet metal, rear tires and wheels 75%, no 3pt, engine turns over, good spark, rebuilt starter, $475, parts or restore; Quentin nnn-nnn-nnnn (Hermiston OR)

Oliver OC3 Cletrac HG crawler grille, $350. Lots of original starters and magnetos off same machines, various prices and conditions; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Oliver OC4, rare, 60 gauge, soft nose crawler, has been sitting for many years, motor was stuck previously but now is free, but never been running, undercarriage is around 60%, home made blade done well, very restorable crawler tractor, sheet metal good, has PTO, as is, $2900; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Oliver tractor parts and tractors model Super 66-880, some hard to find parts, 3pts, tires, wheels, wide front for Oliver 60; Ron Hunter nnn-nnn-nnnn (Puyallup WA)

Starter motors and generators, pile of more than 20 old starter and generators, make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

Tire: Firestone, 420mmx 24 inch tubeless, new on Kubota rims, make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

Tires and wheels, rear, three sets, must take all, fit John Deere D, FREE; Garry Bevier nnn-nnn-nnnn (Yamhill OR)

Tires: one 12.4x28, 25% rubber, $50. One 11x38, 12.4x38, old style tread, older, but not weather, good tread, $100 can deliver to Salem area free; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Tires: set of Firestone Field and Road, 12.4x38 on rims for A, B, G, $600 for set. One 12.4x56 tire, like new, $250. Two 12.4x38 tires, decent shape, came off John Deere 530, rims are bad, have had fluid in them, $400 for set on rims; Chis Carl nnn-nnn-nnnn (Stanwood WA)

Titan 10-20, 1917, Model TV7158, has been stored inside, all original parts, good condition, price reduced to $15500 obo; Ray Jefferies nnn-nnn-nnnn (Palouse WA)

Wallis cast iron tool box cover, 1926, $100, email for picture and shipping information; Dudley Mills nnn-nnn-nnnn or xxxx@xxxx.xxx (Campo CA)

Wheel weights: Case VAC rear weights, $100 per pair. Massey Harris/Oliver rear weights, $80 per pair, delivery possible; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Wheel, power adjust, 12.4x28, tire is 40-50%, rim is not rusted, from a Farmall 300 utility, $300, can send photos; Ben Bole nnn-nnn-nnnn or xxxx@xxxx.xxx (Sherwood OR)