July 2019 - Misc. For Sale

All Classified Ads

Allis Chalmers 40 disc, six foot, 1950s, snap coupler hitch for CA, have used the last 8 years, very good condition, $800; Phil Simon nnn-nnn-nnnn or xxxx@xxxx.xxx (San Diego CA)

Allis Chalmers all crop grain drill, 12 hole, 1950s, snap coupler hitch, have used the past eight years, very good condition, have manual, $1200; Phil Simon nnn-nnn-nnnn or xxxx@xxxx.xxx (San Diego CA)

Allis Chalmers H3 and HD3 manuals, parts and service, two available, $45 for both and free shipping in continental US; Phil nnn-nnn-nnnn (Redmond OR)

Allis Chalmers irrigation pump and engine, stuck from sitting, pump need repair, all for $500 obo; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

Allis Chalmers round baler, 1950s, SN 62007, used for years, still operational, all new hay belts, good tires, demo at Tulare show in 2012, baled 1200 bales of oat hay 2008-2013, have manuals, $1000 firm; Phil Simon nnn-nnn-nnnn or xxxx@xxxx.xxx (San Diego CA)

Allis Chalmers six foot field cultivator, 1950s, snap coupler hitch for CA, all new teeth and fasteners, $450; Phil Simon nnn-nnn-nnnn or xxxx@xxxx.xxx (San Diego CA)

Allis Chalmers two roll seed planter, 1950s, snap coupler hitch for CA, needs some work to plant with, have manual, $400; Phil Simon nnn-nnn-nnnn or xxxx@xxxx.xxx (San Diego CA)

Allis Chalmers water pump, 10 hp, 3 phase, 220-440V 3500 RPM induction motor, 3-1/4 inch flanged inlet, 2-1/4 inch flanged outlet, never used since being rewound, very heavy, $350; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)

Bench vise, 300 lb., been welded on some for repairs around the jaws over the years, neat old piece of Americana, needs restored, very hard to find this size, $500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Billygoat yard vacuum, late model TKV650SPH, self-propelled, Honda engine, built in wood chipper capable of up to 2 inches, comes with extra low dust bag and optional shredder kit, very low hours and NO problems, no longer needed on property, $1600, pictures on request; Lance nnn-nnn-nnnn (Sebastopol CA)

Bobcat backhoe attachment, model 909, $2990; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

Case 580 backhoe front loader bucket (don’t know series), older, 80 inches wide, needs cutting edge, good shape otherwise, $500. Also, a 12 inch backhoe bucket, very good shape, $500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Case manuals, five available, set of two service manuals that cover 430, 530, 470 and 570. Two operator manuals that cover 530 loader/backhoe and 580CK loader/backhoe. One parts manual for 22 utility backhoe for 430 and 440 wheeled tractor. $55 for all five and free shipping in continental US; Phil nnn-nnn-nnnn (Redmond OR)

Case operator manuals, parts books and service manuals. Several available, original books. Several models including C, CC, R, RC, SI, CI, D, L, LP gas equipment for D. Can bring books to Brooks June 1st or 21st; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Caterpillar diesel generators (two), matched pair with D-8800 engines and GE generators, each rated at 50kw, 2400 volt, 3 phase, have less than 4000 hours since Cat dealer rebuilt in early 1960s. Crank start gas pony motors, were standby backup power for 55 years, last run in 2017, use as generators or repower 3T series tractors, $4000 for the pair with original manuals; Mark nnn-nnn-nnnn or xxxx@xxxx.xxx (Chelan WA)

Chain link gate, 25 feet, 6 feet high, $300 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

Chain, 350 feet of anchor chain, over football field long, 4-1/2 inch links, looks to be galvanized, neat looking for landscape, etc. very hard to find, $1500 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Chainsaws, vintage, various makes and models, McCullough, Titans, Malls, Pioneers, Homelite, etc. some parts, never had any running but some may, have quite a few, some look good, have some two man parts also, call for more info, make offer on all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Chevrolet 4 cylinder boat engine block, V0424IBB, with crank, rods, pistons, cam, needs rebuild; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Cordwood saw, maker unknown, PTO, belt driven, rear mount saw, not 3pt, came off a Ford 9N, $100. PTO unit available at additional cost. Can help load at most hours; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)

Dearborn cordwood saws, selling as a pair, one is fair and one not so fair, good tags on both, includes 1 blade, grandpa is too tired to cut wood, can help load at most hours, $100; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)

Dirt mover, 3pt, 8 foot wide, $250; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Wilsonville OR)

Electrical box, red, 5”x5”x4” with covers, 23 available, $110 +S&H; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)

Ferguson hydraulic loader with manual trip bucket, complete, loaders is off a TO30, can send pictures, $850 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Ferguson mower, side mount sickle bar, hydraulic lift, belt drive, model FE0-35, looks unused, drive sprocket missing, $100; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

Forklift, Hyster, Pioneer 50, $5000; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

Generac 6k, Onan power, $250; Mike Russell nnn-nnn-nnnn (Deer Island OR)

Hand gas pumps, two available, off old apple orchard farm, used to fill tractors, trucks, etc. stand about 6 feet tall, very old, $300 takes both; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Hay derrick boom attachment, two piece casting, hasn’t been used for 100 years, make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

Hay wagon, 14’x76”, would make a nice parade float wagon, $875; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)

Hutchinson grain mill, crack corn or what have you, tractor PTO driven, great shape, strongly built, $850; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

Hydraulic water pumping rams, three available, two inch, Skookum, very heavy cast iron, $650. Rife $425 and shop made $400; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)

International 2-way hydraulic cylinders, two available, 16 inch stroke, 3-1/2 inch bore, new in box, $200 each; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

International field cultivator, 6-foot, fast hitch, straight and has had little use, heavy spring tooth design, can send photos, $400; Ben Bole nnn-nnn-nnnn or xxxx@xxxx.xxx (Sherwood OR)

Irrigation pipe, 2700 feet of main line (4 inch x 30 feet), 245 feet of main line (5 inch x 40 feet), 30 #30 Rainbirds (3 inch x 40 feet), extra valves, connectors, end plugs, etc. 4 wheel irrigation trailer, $11750; Jim Santoro nnn-nnn-nnnn (Hillsboro OR)

Irrigation pump, Berkeley, four inch, PTO driven, on a two-wheel cart, $300 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

John Deere 20 scoop, 3pt, $225; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere 850 series, side delivery hay rake, looks to be in good condition, grandpa’s pride and joy, hate to see it go, $400, can send pictures, can help load at most hours; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)

John Deere corn planter, 3pt, two row, needs repair, $30; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)

John Deere grain drill, small, grass seeder attachment and fertilizer attachment, $525; Dave Gallant nnn-nnn-nnnn (Boring OR)

John Deere pull behind five foot bush hog, great shape, $550; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

John Deere RW disc, 12 foot wheel disc, nice shape, $850; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere two row corn planter, 1920-30s, 3pt hitch, lost top cans, good shape, $400 obo; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

Johnson 20 inch snowmobile with trailer (Cutter), original, complete, $200 obo; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)

Logging block wire rope cable pulleys, old, one foot across, single, double and triple, $350 for all 3. Have other separate blocks, $65 to $100 each depending on block, have large old shackles, slip hooks, large steel hooks, various conditions, various prices; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Machine shop surplus: milling machine swivel base vice, 4 and 6 inch, $75 and $150. 10-inch Bridgeport rotary table. X-Y speed handle vice, 6 inch, $150. Pictures available; John Loder nnn-nnn-nnnn (Redmond WA)

Marquette Dynavision, “The Instant Engine Analyzer” with scope, $200 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

Meat: Duroc pork, $3/lb. hanging weight, selling half or whole; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Meyer snow blade, six foot, can send pictures, $350 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline hydraulic loader, 68-inch bucket, complete, can send pictures, $850; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Mower: John Deere M-51, mower for rear of M, complete, needs pitman stick, $200; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Mowers: John Deere No. 5 sickle mowers, $50 each or $95 for both; Dave Gallant nnn-nnn-nnnn (Boring OR)

Plow, International 2-16 inch Fast Hitch, old and slightly weathered but not worn, can send photos; Ben Bole nnn-nnn-nnnn or xxxx@xxxx.xxx (Sherwood OR)

Plows: McCormick 4-16 inch heavy plow, trip lift, on rubber, screw adjuster, $400. John Deere 680 6-16 pull plow, big beam, needs parts, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Pulley, V-belt shiv design, 42-inch diameter, make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

Radial arm saw, Comet Cub, commercial quality, 3/4 hp 120V motor, 8-1/2 inch blade, $150; Mark Bruto nnn-nnn-nnnn (Placerville CA)

Range, wood, antique and ornate, converted to electricity, $300; Nichols nnn-nnn-nnnn (Red Bluff CA)

Refrigerant, R12, 30lb, new and unopened, $650; Nichols nnn-nnn-nnnn (Red Bluff CA)

Refrigerator, commercial, 54 inch wide, 32 inch deep, 78 inch high, new 1/3 hp sealed unit, must be recharged, $300; Nichols nnn-nnn-nnnn (Red Bluff CA)

Snap-On K60 12 drawer tool chest, manufactured 1936-46, rare art nouveau design, 16 inches tall x 15 inches deep x 30 inches wide, more photos on request, FOB Tillamook, $800; Vince Bogard nnn-nnn-nnnn or xxxx@xxxx.xxx (Tillamook OR)

Split ring truss cutting tool sets for large split ring trusses, sets for two inch and 4-inch rings, $85 for both sets; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)

Tires and wheels, 19-5, six available, 90 percent Toyo’s, nice, $350; Mike Russell nnn-nnn-nnnn (Deer Island OR)

Tractor related magazines, from mid to late 1990’s, email for availability, includes Antique Iron, Polks, Gas Engine Magazine, Oliver Hart Parr Collector, MM Correspondence, BF Avery Collectors newsletters and swap meet from Bee Nebraska; Garland Goesch nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Townsend WA)

Trailer, 2017 custom built, 16k gooseneck trailer, adjustable hitch, 22-foot deck, heavy duty ramps, led lights, new winch, built in toolbox, very little use, $5000; David Santoro nnn-nnn-nnnn (Cornelius OR)

Trailer, 26-foot gooseneck flatbed, made by OTM, good condition, new deck, built in ramp, $4500 firm; Mike Fair nnn-nnn-nnnn (Shelton WA)

Trailer, heavy duty, 11’3”x6’10”, tandem trailer, $450; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)

Trailer, tilt bed, home built with 12000 lb. winch, two axles. A V10 wrecked Ford Excursion is on trailer, maybe can talk a great deal for both; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)

Transmission jack, heavy duty, mechanical (not hydraulic), estimate greater than 1-ton capacity, $300 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)

Water Pump, Centrifugal, antique, all complete and very heavy, all with flat belt pulleys, one two inch, painted, works great. One three inch, no paint, works great. One three inch, frozen solid throughout, all there, no cracks, a good hard long project, all three for $400; Dan Brockman nnn-nnn-nnnn speak loudly as hearing is going (Chico CA)

Welder, older Miller portable, Onan engine, Model AEAD 200LE, Onan engine missing the coil, never had this operating, as is, has the leads, $200; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Wheels, cast iron, 10 feet by 16 inches, $1000. 7 feet by 14 inches, $800; Terry Wolbert nnn-nnn-nnnn no texts (Yamhill OR)

Wonder stucco mixer, originally used Cushman Cub, no engine, free to good (or bad) home; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)