1920 Ford Model T touring car, upholstery kit and new wiring in box, new tires and other new parts on car, needs paint, $5500; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Wilsonville OR)
1937 Dodge Business Coupe D5, nice addition to a collection, Regal red color, options: radio, heater, smoke package (lighter, ashtray), has clock inlay in glove box, great looking car, $16000 obo; Terry Christner nnn-nnn-nnnn No calls after 6PM (Molalla OR)
1942 Ford Jeep, WWII, have diesel Kubota engine and Ford Bronco frame, 1963 cast iron 198 cubic inch, good shape, two transmission, all for $4000 obo; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)
1948 International Panel delivery KB-2 truck, no motor or tranny, frame solid, very restorable truck, clean title, $3200; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
1949 Dodge 1/2 ton pickup, total restoration project, engine stuck, has split windshield, wind wings and small side windows, most glass broken. Also have a 1950 1-1/2 ton flat bed truck that has nearly everything needed to complete the cab of the pickup, such as windshield wipers, gauges, knobs, door handles, seat, speedometer, controls, lock and exterior lock cover, even a key in the ignition of the flatbed that turns. $900 for the pickup and $1100 for the flatbed. Email for pictures; Becky or Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Vancouver WA)
1951 Chevrolet 1-1/2 ton flatbed truck, not running, but a good project, $400; Nichols nnn-nnn-nnnn (Red Bluff CA)
1962 Chevrolet Corvair panel, clean title, no rust, new engine, not starting, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1962 Chevrolet Corvair rampside, no title, no rust, runs good, $4000; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1964 General Motors long box, narrow trailer, four inch channel frame, full length tool box one side, small cross tool box, not licensed, $1500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1964 Jaguar MKX, 4 door, good body, great project, have parts, $4000 obo; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)
1965 Chevrolet Corvair Corsa convertible, mostly in pieces, getting ready for complete rebuild, very little rust, clean title, $1500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1965 Chevrolet Corvair Monza, 2 door HT, some rust, interior needs redone, good engine, trans axle needs rebuilt, 4 speed, clean title, $2500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1966 Ford F703, 330 V8, 5 speed with 2 speed rear differential, full air brakes, set up to pull gooseneck or bumper pull trailer, $8500, no rust; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
1967 Dodge Charger and Coronet parts: many body and miscellaneous, call for your wants and prices; Nichols nnn-nnn-nnnn (Red Bluff CA)
1974 Chevrolet 1500 Cheyenne, 350 automatic, 4x4, sold new in Cheney WA, owned by 2 farmers, has not run for years, was barn stored, $1000; David nnn-nnn-nnnn (Spokane WA)
1976 F350 dually, 2wd, 460 4 speed, Dana 70B, runs, needs ignition switch, no title, pretty straight, will part out; David Santoro nnn-nnn-nnnn (Cornelius OR)
1977 Dodge W300, one ton dually flatbed, 4wd, 400 with 4 speed, locking hubs, PTO winch, daily driver, low miles on rebuilt transmission and transfer case, dry eastern Washington State county rig, $3400; David Santoro nnn-nnn-nnnn (Cornelius OR)
1988 Iveco box van, strange Italian truck, very economical capable, $1500 obo; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)
Bumper for pickup, shop built, step plate steel, with internally mounted winch (Warn), possibly from the 1960s, $200 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
Chevrolet 235 core engine, disassembled, $100 obo; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)
Chevy Corvair greenbrier parts rig, $500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Dodge slant 6 on propane, $500; Marsh Solomon nnn-nnn-nnnn (Aguanga CA)
Ford “Dorsett” diesel bus engine, English, 6 cylinder, $150; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)
Ford Excursion V10, wrecked, expensive tires and rims, all for $500; Nick nnn-nnn-nnnn or Bud nnn-nnn-nnnn (Grants Pass OR)
General Motor 4 cylinder engine, rare, 153 cu. in., used in GMC trucks, Chevrolet II, complete core, $150 obo; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)
General Motors transmission with SAE bell housing, 5 speed, out of a 1939 GMC bus, make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
General Motors, five speed transmission, direct in fifth, good unit, 1968, $200; Nichols nnn-nnn-nnnn (Red Bluff CA)
Jeep parts: five U joints, one throw out bearing, four good used 134 pistons, transfer case gaskets; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Lumber rack for pickup, custom built, fits 76 Ford 150, $350; Rocky Jones nnn-nnn-nnnn (Cave Junction OR)
Pickup utility box canopy, 6’4”x9’3”, shelves on each side, no tailgate, overall good condition, can send pictures, $600 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
PTO complete with 90 degree angle belt drive and drawbar, fits Willys Jeep 41-71, $750; Dan Leisen nnn-nnn-nnnn no text (Homedale ID)
Transmission, T87D from a military truck, make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
Truck bed, aluminum, 9’4”x8’, $400 or good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
VM turbo diesel, 6 cylinder, set up for AMC Eagle, rare, weird dealer option, $1000; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)
Wanted for 1919 White model 45 5-ton truck: sheet metal, throttle and spark linkage and other miscellaneous parts; Jim Barratt nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
Wanted for 1927 3/4 ton International truck: flywheel or Waukesha X engine with usable flywheel and other miscellaneous parts and sheet metal. Some parts shared by 6 speed special; Jim Barratt nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
Wanted: distributor cap for Buick model 2335, 1923, 4 cylinder, 170 or 171 engine; Robert nnn-nnn-nnnn (Saskatchewan CAN)
Wheels, antique spoke automobile, some with old tires still on, 17 inch and 18 inch, 6 bold inside of hub cap attachments (no hub cap covers), make good offer; Larry Jacobson nnn-nnn-nnnn (Salt Lake City UT)
Yamaha XS750 shaft drive motor cycles, two available, complete, $500 obo; T. Van Tassel nnn-nnn-nnnn or nnn-nnn-nnnn (Richmond CA)