Allis Chalmers B, 1939, restoration started, but never finished, hand start, engine is loose, comes with parts tractor and sickle bar mower. Grandpa’s new bride says get rid of that stuff. Can assist with loading most any time, $400. At this price you get all the “Old Allis News” magazines grandpa has too; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)
Allis Chalmers HD3 injector pump, crankshaft and miscellaneous parts, make offer; Phil nnn-nnn-nnnn (Redmond OR)
Allis Chalmers motor grader DD, complete, will restore; Marsh nnn-nnn-nnnn (Aguanga CA)
Allis Chalmers WD, 1949, SN 11383, rare model with single front tire (new 5.5”x10”), runs great, carburetor and fuel system recently cleaned, 12V, magneto, adjustable rear wheels, pin coupler hitch, restored about 15 years ago and stored in steel building ever since, tractor located in Fallon NV, photos available by email, $2500 obo; Steve Paulsen nnn-nnn-nnnn or xxxx@xxxx.xxx (Orange CA)
Avery A, wide front, new front tires, stuck, $450; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of parts. Case C, S, or R F&H hc245 rear round spoke wheels 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CC, 1938, runs good, hand start, has good sheet metal, fair tires, easy restoration, hard to find this rare model, pictures on request, $600; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)
Case DC4 with heart shaped front end, hand clutch, live PTO, hydraulic and Eagle hitch, runs need some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DV, 1948, good rear 14.9x26 rear tires, 7.50x16 front tires, 540 PTO, belt pulley, swinging drawbar, new battery, rebuilt carburetor, brakes work good, very straight tin, no dents in rear fenders, runs very good, $1800; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case LA, 1942, front half rebuilt, new radiator, new exhaust manifold, rings, valve job, and 4 new tires. Wheels are original spokes for steel, but have been welded to rims for rubber. Sand blasted all front parts and painted in Case Orange. Transmission and rear drive housing still need to be done. Have fenders, seat, and steering wheel. Fuel tank is painted, hood is only primer. Would make a real nice project tractor for tractor enthusiast, $3000 obo; Mac nnn-nnn-nnnn (Island Park ID)
Case S, 1947, restored condition, very nice, $3250 obo trades?; Don Chappell nnn-nnn-nnnn (St Helens OR)
Case tractors: Case 310s crawlers, three available. One diesel, 2 gas. VAC, SC, four tractors; C Wallace nnn-nnn-nnnn (Toledo WA)
Case VAC front tires and rims, $40, delivery possible; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case VAC parts: grille, hood, side panels, floorboards, fuel tank, rear 28 inch cast center, steering column, manifold, belt pulley complete minus miscellaneous items; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Caterpillar 10 engines: one complete except for manifold and carburetor, $500. One completely disassembled with all internals, no head, $200. One with pistons and pan still on it, no head, $100; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)
Caterpillar 10 high hitch, $1000; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)
Caterpillar 15 or 22 rear crank attachment, $1500. Many other 22 and 10 parts; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)
Caterpillar 15 top seat standard gauge, very good undercarriage, engine stuck, $2000; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)
Caterpillar D2 5J, new blade, tracks roll, clutches stuck, very complete, under carriage poor, would be a good donor or restore, $2000 obo trade?; Don Chappell nnn-nnn-nnnn (St Helens OR)
Cleatrac W with side curtains, not stuck, $900; Larry nnn-nnn-nnnn (Dexter OR)
Cletrac, Wards Twin Row, row crop front, new front tires, stuck, $450; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)
Farmall Cub with front and rear wheel weights, belly blade, 12V generator and lights, everything works, ready to work, $2300; Larry nnn-nnn-nnnn (Phelan CA)
Farmall Cub, 1947, SN 709, all original factory tractor, very good sheet metal and tires, tractor stripped to bare metal and refinished 20 years ago so could be freshened up, one gallon of IH paint included, motor rebuilt, $1850; Russ Shorten nnn-nnn-nnnn (Dayton WA)
Farmall Cub, 1948, very straight tractor, sandblasted and painted about 8 years ago, has a mounted 60 inch belly mower from a later cub, good tires, runs good, $2750; Mike Curtis nnn-nnn-nnnn or xxxx@xxxx.xxx (Terrebonne OR)
Farmall F20, 1937, factory narrow tread so it will fit on a standard car trailer, older restoration, runs good and starts easily, very good tires on F&H round spokes. Also have full steel for it with factory road bands for the front and shop built bands for the rear at an extra cost, $3000 for the tractor, $800 for the steel, will sell wheels separately; Larry nnn-nnn-nnnn (Phelan CA)
Farmall H rear skeleton wheels with lugs, good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall M, 1947, narrow front, good sheet metal, good rubber, starts easy, $2950; Dan Miller nnn-nnn-nnnn (Rochester WA)
Farmall M, 1950, SN FBK226091, wide front end, runs great, carburetor and fuel system cleaned, restored about 15 years ago and stored in steel building ever since, located in Fallon NV, photos available on request, $2750 obo; Steve Paulsen nnn-nnn-nnnn or xxxx@xxxx.xxx (Orange CA)
Farmall parts: Fast Hitch to 3pt adapter, $150. Sheet metal from A to 450 plus miscellaneous parts. Super M, motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall Super C, 1954, Fast Hitch, C-20 2B 2-14 Fast Hitch plow, International Windbreaker, excellent running tractor; Al Barkl nnn-nnn-nnnn (Hazelton ID)
Ford 2N, 1943, sheet metal recently painted, good rubber, $2450 obo, pictures on request; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
Ford 860 tractor, new brakes, hydraulic rebuilt, real good tractor, $4200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 8N pair of rear 28 inch rear rims with centers, very good condition, also fit other models, $195. Two pairs of 19 inch front wheels with tires that are weathered, $50 per pair. Many miscellaneous 8N parts, would make a good deal if they took all; Lee DeVries nnn-nnn-nnnn (Crawfordsville OR)
Ford 8N, 1949, runs good, includes back blade and Ford mower, $2250; nnn-nnn-nnnn (Tacoma WA)
Ford 8N, 1952, easy start, runs great, 3457 hours, SN 482339, 6V, no leaks: gas, oil or water, no rust or dents, sheet metal is perfect, original tachometer and hour meter work, Sherman step up/down transmission, optional Monroe easy ride seat, optional Dearborn swinging drawbar, optional hydraulic outlet for one way cylinder, new front tires, 80% matched rears (calcium has been pumped out of rear tires), new correct one piece exhaust, original steering wheel is perfect, gas tank spotless with non ethanol gas, possible delivery to Northwest Oregon or Southwest Washington, $3850 obo; Gordy nnn-nnn-nnnn (Aurora OR)
Ford 8N, 1952, good tin, remote hydraulic, over running clutch on PTO, tire chains, 12V with fresh rebuilt alternator and starter, new exhaust, heavy duty trailer hitch, rear work light, front bumper with suitcase weights, Sherman step up and Howard reduction gear, engine very tired, weather checked tires hold air, can email photos, $1000; Jerry Loeffelbein nnn-nnn-nnnn (Cashmere WA)
Ford 8N, rebuilt tractor, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 9N-2N parts, NOS, one piston 9N530B, hydraulic lift, 39-52, $37.50. Two piston ring set, 9N675 for hydraulic lifts, $18, 39-52. Two small bolt axle rear retainer assembly with cup, 9N4124, 39-47. 9N hood, 39-46, $250. 9N grille, 39-46, $75; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford Mototug BNO 25, 1943, complete with proper gas tank, hydraulic disc brakes, correct pedals and emergency brakes with handle, correct seat with new upholstery, full armored rear fenders with hitch, $2000 obo, illness forces sale; Stan nnn-nnn-nnnn (Centralia WA)
Ford NAA, 1953, $3200; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford parts: exhaust manifold for NAA. Three victor 49999 axle seals, wheel seal small bolt housing, $20, 39-47. 10 gaskets, 8N4225, $3 each, cork axle shaft. 9N-2N rear axle housing, $450, 39-47; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford tractor parts: two EAF-10145 (53) generation belt adjuster. One axle, 600 & 800 part on 4244, $175. Two 86900100 o ring, 860 hydraulic lift piston, $6. One ANCA473A ring hydraulic lift cylinder, cork, for 860, $8. Diesel vertical exhaust kit 311933 and part 55258, 1958. Long block 8N321987, 1950, machine shop rebuild, $1500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
International 300 utility with McCormick hydraulic loader with 72 inch bucket, 1956, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International 3200 skid steer hydraulic parts, lift rams, drive pumps, lots of miscellaneous including a V4 Wisconsin, take all for $650; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
International 350 Hi-Utility fast hitch, one remote, runs, needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International belt pulleys, three inch centers and four bolt, one is 9.5 inches in diameter and the other is 11 inches, $50 for both; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
International Cub white grille, runs perfectly, good rubber, good sheet metal, not restored, comes with blade which mounts in front or underneath, plow, tandem disc for Cub, very nice condition, $3750 obo trades?; Don Chappell nnn-nnn-nnnn (St Helens OR)
International Cubs, 1947 and 1948, one has blade, other has belly mower, also have a plow, $3250 for all; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
International tractors: two 10-20, one on steel one on rubber, Kay wheels. Two 10-20 crawlers, F14 runner, F20 parts, Cubs, As, Super C, Super H, O4; C Wallace nnn-nnn-nnnn (Toledo WA)
John Deere 1010 utility, rear exhaust, runs good, $3500; David nnn-nnn-nnnn (Spokane WA)
John Deere 420 dozer, fresh valve grind, gaskets, carburetor rebuilt, poor tracks, very good pads, $2750 obo trades?; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere 420 utility, all green/phase one, runs good, $2700; David nnn-nnn-nnnn (Spokane WA)
John Deere 420U, 1958, needs restoration and don’t have the skills, so it’s up for sale. It is sentimental to my wife so would like it to go to someone that can bring it to its previous glory. Runs, but is losing compression. It has a front end loader and original bucket (believed to be original). The metal is sound and do not believe any metal repair will be required. Most of the original paint. Can email or text pics if interested, $1800; Ken Espersen nnn-nnn-nnnn (Mount Hood Parkdale OR)
John Deere 420W, starts easily, runs and drives well, very good mechanical condition, sheet metal, transmission, wheels and tires are all very good, hydraulics, 3pt hitch and PTO work as they should, engine overhauled about 10 years ago and about 150 hours since then, big bonus of factory power steering, makes it very easy to drive, $3400 email for photos/video; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 440I, gas wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt, side shift) work, decent tires and sheet metal is good, ready for your paint job, original Blackwelder manual and copies of the 440 manuals, $5500, email for photos/video; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere A and D parts, many parts including tires, wheels. Headed for scrap, make offer; Garry Bevier nnn-nnn-nnnn (Yamhill OR)
John Deere A, 1935, running when parked 6 years ago, all spoke wheels, single front has dual tires. Hooked to tractor is JD 116W baler with four cylinder Wisconsin motor, both for $2800; Russ Wiggins nnn-nnn-nnnn (Ontario OR)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26 inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30 inch wheel cast centers, part # F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere AR, 1941, SN 261400, starts/runs well, good rear 26 inch tires and wheels, comes with new rear fenders (made by Detwiler) and an excellent used rear platform, $1850; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere BI, 1937, restored, new pistons, rings, rods and clutch, plus much more. Transmission is perfect. Sandblasted, primed and painted with correct JD color, call with questions, $7999; John nnn-nnn-nnnn (Medford OR)
John Deere BO Lindeman crawler, 1943, overhauled engine, $5000. JD D, 1948, running original condition, $2500. Call for pictures and details; Merv Johnson nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d’Alene ID)
John Deere BWH tractors, one 1945 and one 1946 on spoke rear wheels, rough but the real thing with confirmed serial number search documents, only 280 of this model made, $1950 each or $3600 for both, email for photos or video, see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere D turning brakes, complete system with brakes, wheel hubs, main case and serial tag, $450 email for photos; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, 1947, pan seat, only 2500 made, electric start, good metal, fair tires, need manifold gasket, $2750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere H, 1941, older restore, excellent sheet metal/paint, new tire front/rear, starts/runs good, $2750; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere M, 1948, good looking restoration, complete, stars easily, runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2800, email for photos or video, see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere M, 1951, very good original condition, complete, starts easily, runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2400 email for photos/video; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere Rs, two available, don’t run, one has factory cab minus rear doors, $1800 for both; David nnn-nnn-nnnn (Spokane WA)
John Deere styled G, just parted two complete tractors, most parts available, still putting parts on the website, if you don’t see what you need, ask; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere tractors: 1936 B, ag back with cultivator, new rubber on F&H wheels, new magneto, new radiator core, new rings and is parade ready. 1948 AR, strong runner with straight tin, new battery, and good rubber front and back. Pictures on request, $2500 each or trade for clean BO; Frank Stricklin nnn-nnn-nnnn (Silverdale WA)
John Deere tractors: 37 AR, 20 D, Styled A, B, H and MC; C Wallace nnn-nnn-nnnn (Toledo WA)
Marvel Schebler carburetor, approximate one inch throttle bore, came with an old AC tractor, but should fit others makes, good rebuildable core, pictures on request, $20; Lance nnn-nnn-nnnn (Sebastopol CA)
Massey Ferguson backhoe with rebuilt Perkins motor, rebuilt, runs good and operates good, $7000; Abraham nnn-nnn-nnnn (Exeter CA)
Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
McCormick Deering 10-20, Kay Bruner wheels, front tires ok, rear tires no good, there is a pair of rear tires with period tread, they look ok? Hood is good and side panels, one rear fender is ok the other one needs work, $500; Warren Roberts nnn-nnn-nnnn (Chehalis WA)
McCormick Deering parts: NOS T20 fuel tank, $300. T20 belt pulley assembly, $350. Miscellaneous F20 parts; Larry nnn-nnn-nnnn (Phelan CA)
McCormick Deering T20 rolling carcass, no engine, radiator, etc. very very nice undercarriage, $400; Larry nnn-nnn-nnnn (Phelan CA)
McCormick Deering TracTractor, 1929, runs good, was last used in 2015 in a 10 acre orchard, stored inside since, located in San Juan Bautista, less than 500 built, $8000; Theodore nnn-nnn-nnnn phone calls only (Nevada City CA)
McCormick Deering WK-40, full steel, original engine free, $4000. I4, turns over, good shape, $950. O4, parting out, orchard belt pulley, shutters; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Minneapolis Moline BF, wide front, new front tires, stuck, $450; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)
Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, 4 remotes, amplitorque, good sheet metal, duals, rear main seal leak, can send pictures, $4450 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline GVI, diesel, 1960, 68 hp, 540 PTO, 213.1-26 rears, 7.50-18 fronts, cab with all glass, good sheet metal, 2 remotes, with 9 foot Cancade hydraulic two way front blade, will sell with or without blade, blade available separately, can send pictures, $4450 with blade obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UTU, 1946, restorable or for parts, never had it running, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline Z parts tractor, can send pictures, $250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline Z, three to choose from, one has hydraulic loader, call for info; Don Chappell nnn-nnn-nnnn (St Helens OR)
Oliver 10x38 inch rear wheel, 9 bolt pattern, nice rim. 32x8 inch Oliver wheel, little rust, $30. Oliver/Cockshut rear wheel weights; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Oliver 18-28 complete, not stuck, SN 801828B, $500; Larry nnn-nnn-nnnn (Dexter OR)
Oliver 70 parts: flat band front steel wheels, row crop wide front knees, belt pulley, manifold and miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 88 hi crop, wide front, good sheet metal, rear tires and wheels 75%, no 3pt, engine turns over, good spark, rebuilt starter, $475, parts or restore; Quentin nnn-nnn-nnnn (Hermiston OR)
Oliver OC3 Cletrac HG crawler grille, $350. Lots of original starters and magnetos off same machines, various prices and conditions; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Oliver OC3 HC-42, very nice cat, needs crankshaft front pulley and generator bracket, runs great, $2250 obo trades?; Don Chappell nnn-nnn-nnnn (St Helens OR)
Oliver OC4, rare, 60 gauge, soft nose crawler, has been sitting for many years, motor was stuck previously but now is free, but never been running, undercarriage is around 60%, home made blade done well, very restorable crawler tractor, sheet metal good, has PTO, as is, $2900; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Oliver tractor parts and tractors model Super 66-880, some hard to find parts, 3pts, tires, wheels, wide front for Oliver 60; Ron Hunter nnn-nnn-nnnn (Puyallup WA)
Tires and wheels, rear, three sets, must take all, fit John Deere D, FREE; Garry Bevier nnn-nnn-nnnn (Yamhill OR)
Tracks: one set for Cleatrac 20C, good. One set for Oliver 46, good. One set for BG Cletrac, fair; Dana Davis nnn-nnn-nnnn (Sequim WA)
Wallis cast iron tool box cover, 1926, $100, email for picture and shipping information; Dudley Mills nnn-nnn-nnnn or xxxx@xxxx.xxx (Campo CA)
Wheel weights: Case VAC rear weights, $100 per pair. Massey Harris/Oliver rear weights, $80 per pair, delivery possible; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Wheel, power adjust, 12.4x28, tire is 40-50%, rim is not rusted, from a Farmall 300 utility, $300, can send photos; Ben Bole nnn-nnn-nnnn or xxxx@xxxx.xxx (Sherwood OR)