Allis Chalmers B, 1939, we had this tractor running a couple of years ago. It has been stored inside. However, we cannibalized some parts for another tractor. Grandpa’s new bride is offering up this unit with a parts tractor with mower, most parts there to complete one. She says, if it doesn’t go in September, she will borrow some tools and fix it herself. Price is still $400, can help load at most hours; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Allis Chalmers G, 1950, runs, $3500; Lou Ward nnn-nnn-nnnn (Brush Prairie WA)
Allis Chalmers WD 45s, self-propelled beet diggers mounted, one diesel, one gas, $1000-$1500 obo. Additional AC parts, two AC three bottom plows; Sam Sweeney nnn-nnn-nnnn (Dayton OR)
Allis Chalmers WD, 1949, SN 11383, rare model with single front tire (new 5.5”x10”), runs great, carburetor and fuel system recently cleaned, 12V, magneto, adjustable rear wheels, pin coupler hitch, restored about 15 years ago and stored in steel building ever since, tractor located in Fallon NV, photos available by email, $2100; Steve Paulsen nnn-nnn-nnnn or xxxx@xxxx.xxx (Orange CA)
Avery A, wide front, new front tires, stuck, $450; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)
Case 310, 1957, gas engine, four speed, 540 PTO, 3pt, new battery, new tune up and oil change, tractor starts and runs good, needs front screen/grille, rear tires are good, not sure what’s on the hood paint, it’s not Bondo, looks like black paint, $1650, delivery available; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of parts. Case C, S, or R F&H hc245 rear round spoke wheels 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CC, 1938, runs good, fair tires, good sheet metal, pictures on request, $550; Jim Gardner nnn-nnn-nnnn or xxxx@xxxx.xxx (Vernonia OR)
Case DC4 with heart shaped front end, hand clutch, live PTO, hydraulic and Eagle hitch, runs need some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DV, 1948, all original, orchard tractor, starts and runs great, tin work in great condition, back tires are good, has rear weights, fronts hold air, new battery, plugs and plug wires, sounds really good, great show tractor, $1800, free delivery within 100 miles; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case L, 1937, on steel, runs, make offer; Lou Ward nnn-nnn-nnnn (Brush Prairie WA)
Case LA, 1942, front half rebuilt, new radiator, new exhaust manifold, rings, valve job, and 4 new tires. Wheels are original spokes for steel but have been welded to rims for rubber. Sand blasted all front parts and painted in Case Orange. Transmission and rear drive housing still need to be done. Have fenders, seat, and steering wheel. Fuel tank is painted, hood is only primer. Would make a real nice project tractor for tractor enthusiast, $3000 obo; Mac nnn-nnn-nnnn (Island Park ID)
Case S, 1947, restored condition, very nice, $3250 obo trades?; Don Chappell nnn-nnn-nnnn (St Helens OR)
Case SC parts tractor, 1941, engine is free, not stuck, one rear tire shot, has distributor instead of magneto, lots of usable parts, $500 obo, can deliver; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case SC, 1948, restored, engine redone a few years back, starts, runs and sounds good, good tires, has a ROPS and PTO driven winch added to it, has front counterweight. Was used to gather firewood trees on private property, $1800, can deliver; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case tractors: Case 310s crawlers, three available. One diesel, 2 gas. VAC, SC, four tractors; C Wallace nnn-nnn-nnnn (Toledo WA)
Case VAC parts: hood, grille, seat, gas tank, radiator, floorboards, lots of miscellaneous rods and small parts. Some engine parts, no block, head or crank. Also, big 500 Case fuel tank, rocker arms, push rods, brakes and other miscellaneous parts. Parts and operator books on D, S, SC, CC, RC and others. Lots of original Case toolboxes. Can email pictures; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case VAC, runs, needs TLC, $1200; Chris Carl nnn-nnn-nnnn or xxxx@xxxx.xxx (Stanwood WA)
Caterpillar 10 engines: one complete except for manifold and carburetor, $500. One completely disassembled with all internals, no head, $200. One with pistons and pan still on it, no head, $100; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)
Caterpillar 10 high hitch, $1000; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)
Caterpillar 15 or 22 rear crank attachment, $1500. Many other 22 and 10 parts; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)
Caterpillar 15 top seat standard gauge, very good undercarriage, engine stuck, $2000; Wally Adams nnn-nnn-nnnn (Morgan Hill CA)
Caterpillar 22 spark plug cover, $100; Randy Wixsten nnn-nnn-nnnn (Butte MT)
Caterpillar 28, 4F425, runs, drives and steers well, sheet metal is good, heat box is missing on manifold, home made drop tube on intake manifold, good undercarriage, standard gauge, stored inside; Rick nnn-nnn-nnnn (Truckee CA)
Caterpillar D2 5J, new blade, tracks roll, clutches stuck, very complete, under carriage poor, would be a good donor or restore, $2000 obo trade?; Don Chappell nnn-nnn-nnnn (St Helens OR)
Caterpillar D2 for parts, $1000; Carol nnn-nnn-nnnn (Keno OR)
Cletrac W with side curtains, not stuck, $900; Larry nnn-nnn-nnnn (Dexter OR)
Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac model 25s: one early, one late. Both great running JDX engines, rebuilt radiators, 12V starter, 12V generators, WPs, NOS distributors, 1 has rare belt pulley, sold together only, $3500; Roland Bleitz nnn-nnn-nnnn or xxxx@xxxx.xxx (Grants Pass OR)
Cletrac reproduction brass gas caps for R, H and W model crawlers. Perfect show quality copies, included with each is a brass threaded filler neck, $100 per set, shipping $8 USPS priority; Lou Montero nnn-nnn-nnnn or xxxx@xxxx.xxx (Jackson CA)
Cletrac, 1920, runs, $3500; Lou Ward nnn-nnn-nnnn (Brush Prairie WA)
Cletrac, Wards Twin Row, row crop front, new front tires, stuck, $450; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)
Cores: Farmall H OEM carburetor and extra parts. Fairbanks Morse J four-cylinder magneto. Farmall H starter fuel tank has small dent. Farmall H fuel tank, no rust, used camera to look inside and in good shape. Carburetor right side throttle control for Farmall 300, 400 or M. Miscellaneous starters, generators, some bolt on, some cores, price includes shipping; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Farmall Cub demonstrator, 1950, SN 100980, restored, call or email for more details; Patrick Bold nnn-nnn-nnnn or xxxx@xxxx.xxx (Delhi CA)
Farmall Cub with front and rear wheel weights, belly blade, 12V generator and lights, everything works, ready to work, $2300; Larry nnn-nnn-nnnn (Phelan CA)
Farmall Cub, 1947, SN 709, all original factory tractor, very good sheet metal and tires, tractor stripped to bare metal and refinished 20 years ago so could be freshened up, one gallon of IH paint included, motor rebuilt, $1850; Russ Shorten nnn-nnn-nnnn (Dayton WA)
Farmall Cub, 1948, very straight tractor, sandblasted and painted about 8 years ago, has a mounted 60-inch belly mower from a later cub, good tires, runs good, $2750; Mike Curtis nnn-nnn-nnnn or xxxx@xxxx.xxx (Terrebonne OR)
Farmall F20, 1937, factory narrow tread so it will fit on a standard car trailer, older restoration, runs good and starts easily, very good tires on F&H round spokes. Also have full steel for it with factory road bands for the front and shop-built bands for the rear at an extra cost, $3000 for the tractor, $800 for the steel, will sell wheels separately; Larry nnn-nnn-nnnn (Phelan CA)
Farmall H rear skeleton wheels with lugs, good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall M project, needs radiator replaced (included), has down flow exhaust, runs strong, also have some extra sheet metal and pieces included, FOB; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Farmall M, 1947, narrow front, good sheet metal, good rubber, starts easy, $2950; Dan Miller nnn-nnn-nnnn (Rochester WA)
Farmall M, 1950, SN FBK226091, wide front end, runs great, carburetor and fuel system cleaned, restored about 15 years ago and stored in steel building ever since, located in Fallon NV, photos available on request, $2300; Steve Paulsen nnn-nnn-nnnn or xxxx@xxxx.xxx (Orange CA)
Farmall Model M, 1950, runs and drives good, good sheet metal, needs tires, $800 firm; Gary nnn-nnn-nnnn (Sheridan OR)
Farmall parts: Fast Hitch to 3pt adapter, $150. Sheet metal from A to 450 plus miscellaneous parts. Super M, motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Ford 2N road grader, power unit only, bad engine, no steering front axle, huge wheel weights, front hydraulic pump, $400; Fred nnn-nnn-nnnn (Bandon OR)
Ford 2N, 1943, sheet metal recently painted, good rubber, $2450 obo, pictures on request; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
Ford 8N parts, many new and used. Includes 2 new mufflers and tailpipes, new clutch kit and manifold, new swinging draw bar kit (complete). Used parts include: belt pulley, rebuilt carburetor and front mount distributor, generator, crankshaft, machined head and many more. Would like to sell as a kit. Call for a more complete list. Make reasonable offer; Rick Murray nnn-nnn-nnnn (Klamath Falls OR)
Ford 8N, ran when parked 20 years ago, has very good sheet metal, fair tires, complete tractor, $800 obo; Frank nnn-nnn-nnnn (Morgan Hill CA)
Ford 8N, runs, no compression on one-cylinder, original, rusty dairy tractor, $800; Chris Carl nnn-nnn-nnnn or xxxx@xxxx.xxx (Stanwood WA)
Ford 9N, 1941, comes with Ferguson plow, easy start, runs great, new tires front and back, new gas tank, rebuilt carburetor, has two extra rear rims, must see to appreciate; Walt Costa nnn-nnn-nnnn (Gustine CA)
Ford 9N, 3pt lift control lever quadrant, early quadrant, as it is thicker aluminum, photos available by text, $200 plus shipping; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)
Ford 9N, runs well, NN tires, $1500; Randy Wixsten nnn-nnn-nnnn (Butte MT)
Ford Mototug BNO 25, 1943, complete with proper gas tank, hydraulic disc brakes, correct pedals and emergency brakes with handle, correct seat with new upholstery, full armored rear fenders with hitch, $2000 obo, illness forces sale; Stan nnn-nnn-nnnn (Centralia WA)
Ford parts, 9N and 2N: fenders, heads, radiators, transmission, etc. Reasonably priced, call with needs; Fred nnn-nnn-nnnn (Bandon OR)
Ford tractor and Ford flail mower, runs and mows well, $4250; Ed Laudert nnn-nnn-nnnn (Washougal WA)
Fordson, 1920, runs, on steel, make offer; Lou Ward nnn-nnn-nnnn (Brush Prairie WA)
Graham Bradley, 1939, restored, includes restored factory mounted mower and unrestored two bottom plow, plus a parts tractor, all for $10000; Milton Nichols nnn-nnn-nnnn (Red Bluff CA)
International 350 Hi-Utility fast hitch, one remote, runs, needs TA work, $1000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
International 424s, both run good, gas, 3pt, drawbar, single remote hydraulic valve, power steering, $3400 for the pair obo, will sell individually, call, text or email for more information and pictures; Joe nnn-nnn-nnnn or xxxx@xxxx.xxx (Escalon CA)
International A industrial, new front tires, one new rear tire, other rear 75%, front axle and PTO correct, engine has run, seems okay, $800; Morrie Robinson nnn-nnn-nnnn (Sedro Woolley WA)
International belt pulleys, three-inch centers and four bolt, one is 9.5 inches in diameter and the other is 11 inches, $50 for both; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
International Cub Lowboy 154 with loader, been sitting a long time, cylinders are pitted, hoses need replacement, control valve works well, not tried to start it, engine is free, $1000 obo; Jerry Bird nnn-nnn-nnnn (John Day OR)
International Cub white grille, has hydraulics, good rubber, nice sheet metal, runs excellent, comes with blade, plow, disc, mower, lights, very nice tractor package deal, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)
International Cubs, 1947 and 1948, one has blade, other has belly mower, also have a plow, $3250 for all; Wayne Sealock nnn-nnn-nnnn (Yakima WA)
International TD6 dozer with nice blade and decent ROPS, tracks look good, nice sheet metal, engine locked up when I tried to start it, hate to scrap it out, $800 obo; Jerry Bird nnn-nnn-nnnn (John Day OR)
International Titan 10-20, 1918, complete, original tractor, engine is seized, comes with new valves, guides, springs, etc. and some extra parts, $11000 and trades considered; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
International tractors: two 10-20, one on steel one on rubber, Kay wheels. Two 10-20 crawlers, F14 runner, F20 parts, Cubs, As, Super C, Super H, O4; C Wallace nnn-nnn-nnnn (Toledo WA)
International/McCormick B 275 diesel, engine free, not running, $500, can deliver; Dave Schirrick nnn-nnn-nnnn (Winnemucca NV)
John Deere 40S, starts easily and runs and drives well, hood and fenders are very nice, grille could use some work, wheel are all very good, rear tires are excellent, hydraulics 3pt and PTO work well, $2800, email for photos or video, see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 420 crawler with manual tilt and angle blade, crawler sat for ten years but starts and runs good, has oil in the water like it may have a leaking head gasket plus some blowby, engine oil looks very good, has a nice winch on rear, canopy and undercarriage, very good, four roller, will need steering work from sitting but this crawler is nice condition for its age, as is, $4400; Joseph Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 crawler with nice hydraulic blade, undercarriage very good, sheet metal good, steers great both ways, four roller undercarriage, very nice machine, has PTO, $4900; Joseph Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 dozer, fresh valve grind, gaskets, carburetor rebuilt, poor tracks, very good pads, $2750 obo trades?; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere 420 five roller crawler with Holt hydraulic tilt blade, motor is stuck, track chain is good, but pads and sprockets wore, good sheet metal, lots of very good parts or restore this, $2200; Joseph Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420U, 1958, needs restoration and don’t have the skills, so it’s up for sale. It is sentimental to my wife so would like it to go to someone that can bring it to its previous glory. Runs, but is losing compression. It has a front-end loader and original bucket (believed to be original). The metal is sound and do not believe any metal repair will be required. Most of the original paint. Can email or text pics if interested, $1800; Ken Espersen nnn-nnn-nnnn (Mount Hood Parkdale OR)
John Deere 420W, starts easily and runs and drives well, very good mechanical condition, sheet metal, transmission, wheels and tires all very good, hydraulics 3pt hitch and PTO work as they should, engine was overhauled about ten years ago and has about 150 hours on it since, one big bonus is factory power steering that makes this a very easy tractor to drive, $3400, email for photos, video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 440I, gas wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt and side shift) work, decent tires and sheet metal is good, have original Blackwelder manuals as well as copies of the 440 manuals, $4950, email for photos, video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 440IC loader backhoe, runs well, operates good, steers good, gas, with manuals, $3500; Randy Wixsten nnn-nnn-nnnn (Butte MT)
John Deere 440IC, loader crawler, not running, engine is loose, unit rolls on tracks, well worn tracks, has factory rippers, $800 obo; Frank nnn-nnn-nnnn (Morgan Hill CA)
John Deere 630, row crop, low hours 3500, starts and runs perfectly, does not smoke or use oil, Roll-O-Matic, power steering, original 3pt hitch with original top link, third owner, new manifold set and complete valve job, very good rear tires, fronts are serviceable, only dents are in screen and only rust is in battery box, includes #45 loader, rebuilt lift cylinders, converted to hydraulic dump and includes a shop made forklift, $4500; Jim Temple nnn-nnn-nnnn (Noti OR)
John Deere A and D parts, many parts including tires, wheels. Headed for scrap, make offer; Garry Bevier nnn-nnn-nnnn (Yamhill OR)
John Deere A, 1935, running when parked 6 years ago, all spoke wheels, single front has dual tires. Hooked to tractor is JD 116W baler with four-cylinder Wisconsin motor, both for $2800; Russ Wiggins nnn-nnn-nnnn (Ontario OR)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch wheel cast centers, part # F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere AR, 1941, SN 261400, starts/runs well, good rear 26-inch tires and wheels, comes with new rear fenders (made by Detwiler) and an excellent used rear platform, $1850; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere AR, 1946, nice complete, straight tractor, electric start with lighting package, engine is loose but not currently running, $1800 and trades considered; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
John Deere B, 1939, nearly new front and rear tires, No. 5 sickle bar power mower attached, complete with foot pedal lift, comes with a rubber tire tail wheel for the mower, package deal, $2200; Paul nnn-nnn-nnnn (Albany OR)
John Deere BN, 1937, rare long frame tractor project, call for details, $1000; Dave nnn-nnn-nnnn (Aurora OR)
John Deere BN, 1952, SN 276805, early renovation, starts and runs great, new single front tire, rear tires in good condition, $3000; John Shierman nnn-nnn-nnnn (Battle Ground WA)
John Deere BO Lindeman crawler, 1943, overhauled engine, $5000. Call for pictures and details; Merv Johnson nnn-nnn-nnnn or nnn-nnn-nnnn (Coeur d’Alene ID)
John Deere BO, 1947, electric start and lights, very good original condition except hood has been repainted, starts easily, runs well, engine was overhauled by previous owner, $3000; Paul nnn-nnn-nnnn (Albany OR)
John Deere BR, 1937, on steel, runs, $4500; Lou Ward nnn-nnn-nnnn (Brush Prairie WA)
John Deere BWH tractors, one 1945 and one 1946 on spoke rear wheels, rough but the real thing with confirmed serial number search documents, only 280 of this model made, $1900 each or $3500 for both, email for photos or video, see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere D, 1947, electric start, repainted, nice shape, new front tires, $4500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, 1947, pan seat, only 2500 made, electric start, good metal, fair tires, need manifold gasket, $2750; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, styled, two complete tractors parted out, most parts available; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere GP, 1929, excellent runner, decent tires, call for info, $5250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere H, 1941, older restore, excellent sheet metal/paint, new tire front/rear, starts/runs good, $2750; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
John Deere L or LA belt pulley, good condition, $225; Dave nnn-nnn-nnnn (Aurora OR)
John Deere Lindeman crawler, new tracks, new valve grind, no welds or cracks, very nice original crawler, no blade, $7500; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere M, 1951, very good original condition, complete, starts easily, runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2400, email for photos, video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere MC crawler, original low hour tractor, one owner tractor, good condition, $2950; Dave nnn-nnn-nnnn (Aurora OR)
John Deere Ms: two partial tractors, plus many other parts like finals, transmissions, etc. One M has a belt pulley setup, make offer on lot or any part; Frank nnn-nnn-nnnn (Morgan Hill CA)
John Deere R, 1950, nice running original tractor, pony engine runs well and has rare rope start option but needs cable replaced, $3900 and trades considered; Jon nnn-nnn-nnnn or xxxx@xxxx.xxx (Chilliwack BC)
John Deere tractors: 1936 B, ag back with cultivator, new rubber on F&H wheels, new magneto, new radiator core, new rings and is parade ready. 1948 AR, strong runner with straight tin, new battery, and good rubber front and back. Pictures on request, $2500 each or trade for clean BO; Frank Stricklin nnn-nnn-nnnn (Silverdale WA)
John Deere tractors: 1950 B, Roll-O-Matic front end, live hydraulic pump, just retired from haying last year, runs well, $1250. 1948 AW, good running tractor in original paint, rebuilt engine in 2005, used to hay for a few years, now it’s retired, $2000. 1946 anteater A, stuck, rough, comes with running parts tractor, $1200. 1952 AN, 16-inch front wheel, 42-inch rear wheels, stuck, comes with running parts tractor, $1200. 1940 AN, new 36-inch rear tires, round spoke factory rear wheels, $1850. 1950 AN, 42-inch rear wheels, 16-inch single front, running tractor, $1200. 1940 A with loader, motor is loose, tractor converted to electric start, $750. G parts tractor, Roll-O-Matic front end, rear wheel weights, $500 obo. Parting out 60. Lots of As and Bs hoods, blocks, grilles, etc.; Chris Carl nnn-nnn-nnnn or xxxx@xxxx.xxx (Stanwood WA)
John Deere tractors: 37 AR, 20 D, Styled A, B, H and MC; C Wallace nnn-nnn-nnnn (Toledo WA)
LeTourneau model X, four-yard cable scraper, tires are shot, have the winch unit that goes on the Cat, looks to be ex-Army, could be converted to hydraulic, good shape other than tires, $1000 obo; Jerry Bird nnn-nnn-nnnn (John Day OR)
Marvel Schebler carburetor, approximate one-inch throttle bore, came with an old AC tractor, but should fit others makes, good rebuildable core, pictures on request, $20; Lance nnn-nnn-nnnn (Sebastopol CA)
Massey Ferguson 98 tractor, 371 Detroit engine, older restoration, nice tractor, $14500; Dave nnn-nnn-nnnn (Aurora OR)
Massey Ferguson backhoe with rebuilt Perkins motor, rebuilt, runs well and operates good, $7000; Abraham nnn-nnn-nnnn (Exeter CA)
Massey Ferguson, 1958 rear end with transmission, two speed, hi and low, no tires, plus single front end with good tire, $100 obo; John nnn-nnn-nnnn (Craigmont ID)
Massey Harris Pony, needs restoration, good winter project, $600; Don Barnard nnn-nnn-nnnn (Dundee OR)
McCormick Deering 10-20, Kay Bruner wheels, front tires ok, rear tires no good, there is a pair of rear tires with period tread, they look ok? Hood is good and side panels, one rear fender is ok the other one needs work, $500; Warren Roberts nnn-nnn-nnnn (Chehalis WA)
McCormick Deering parts: NOS T20 fuel tank, $300. T20 belt pulley assembly, $350. Miscellaneous F20 parts; Larry nnn-nnn-nnnn (Phelan CA)
McCormick Deering T20 rolling carcass, no engine, radiator, etc. very nice undercarriage, $400; Larry nnn-nnn-nnnn (Phelan CA)
McCormick Deering TracTractor, 1929, runs well, was last used in 2015 in a 10-acre orchard, stored inside since, located in San Juan Bautista, less than 500 built, $8000; Theodore nnn-nnn-nnnn phone calls only (Nevada City CA)
McCormick Deering WK-40, full steel, original engine free, $4000. I4, turns over, good shape, $950. O4, parting out, orchard belt pulley, shutters; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Meyers bulldozer water pump, belt driven, $75; Dave nnn-nnn-nnnn (Aurora OR)
Minneapolis Moline BF, wide front, new front tires, stuck, $450; Garland Goesch nnn-nnn-nnnn (Port Townsend WA)
Minneapolis Moline RTU, 4 new tires, restored, yes, it is 80 years old, $2950; Hubert Bierly nnn-nnn-nnnn (Bend OR)
Minneapolis Moline Z, three to choose from, one has hydraulic loader, call for info; Don Chappell nnn-nnn-nnnn (St Helens OR)
Oliver 18-28 complete, not stuck, SN 801828B, $500; Larry nnn-nnn-nnnn (Dexter OR)
Oliver 70 parts: flat band front steel wheels, row crop wide front knees, belt pulley, manifold and miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 77 diesel, intake and exhaust manifold. Exhaust manifold for Oliver 88 with Oliver cast into it. Bolt on condition. Can supply gasket on request; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Oliver HG crawler, 1948, older restoration, show ready, under carriage is about 80-85%, has PTO and belt pulley, $3600 obo; Norm Bunker nnn-nnn-nnnn (Bellingham WA)
Oliver OC3 Cletrac HG crawler parts, sheet metal, starters, magnetos, etc., call for more info; Joseph Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Oliver OC3 HC-42, very nice cat, needs crankshaft front pulley and generator bracket, runs great, $2250 obo trades?; Don Chappell nnn-nnn-nnnn (St Helens OR)