November 2019 - Tractors & Parts For Sale

All Classified Ads

Allis Chalmers D17, 1957, gas, snap coupler 3pt, 18.4-28 rear tires, 70%, 6.00-16 fronts, 90%, good paint, runs well, retiring from farming, $3500; Earl Ming nnn-nnn-nnnn (Sandy OR)

Allis Chalmers G, 1949, less than 10 hours on complete engine rebuild, needs cleaning and painting, $3500 firm; Phil Wall nnn-nnn-nnnn (Enumclaw WA)

Allis Chalmers M crawlers, 1936, WM2453, very good condition, $2300. 1941 WM11632, not running, cracked block, old repair, $550; Don Foltz nnn-nnn-nnnn (Scio OR)

Allis Chalmers Monarch 35, parting out. Also parting Minneapolis M5 diesel; Buck Evans nnn-nnn-nnnn (Greenville IL)

Allis Chalmers WD and WD45, both are parts tractors but complete, think one is runnable, $600 obo for the pair; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Backhoe, 3pt, recommended for 18-30 hp, came off wife’s John Deere 4100 tractor, but she wants it gone. $2400 obo; Al nnn-nnn-nnnn (Sacramento CA)

Case 300, 1956, parting out or buy as is, block has a hole in it; Richard Brunk nnn-nnn-nnnn (Raymond WA)

Case 310 cats, three gas, one diesel, 530 gas backhoe, SC and VAC; C Wallace nnn-nnn-nnnn (Toledo WA)

Case 310, good condition, new front tires, rears at 90%, runs great and everything works, has over/under drive transmission and 3pt hitch, pictures on request, $2200; Lou nnn-nnn-nnnn (Jackson CA)

Case 311B gas, runs but needs governor work, has rebuilt carburetor, tires in great shape, comes with narrow front end and wide front end, has factory 3pt, $1200 obo; Matt O nnn-nnn-nnnn call or text (Ceres CA)

Case 430, 1968, gas tractor, 8 speed, 540 independent PTO, cat 1 3pt, good 14.9x24 rear tries with rear weights, 6.50x16 front tires, new rims all the way around, new battery, starts and runs good, $2500; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Case 4JM magneto, rebuilt and guaranteed, $300; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Case 600 Wheatland, six cylinder diesel engine free, nice shape, low production, $2000; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case C tractors, one on rubber and one on steel, believed to both be runners, $1000 obo for the pair; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of parts. Case C, S, or R F&H hc245 rear round spoke wheels 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case crawler forklift Model M3B, very rare, made in the late 50s, very good undercarriage, four cylinder gas engine, factory built from the 310 crawler, mast goes up about 17 feet, owned for over 20 years, very nice shape for its age, probably one of the nicest in existence, runs and steers good, only about 80 were made, pictures upon request, $9500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Case D, good runner, decent tires, $1200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Case DC4 with heart shaped front end, hand clutch, live PTO, hydraulic and Eagle hitch, runs need some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Case DV, 1948, vineyard tractor, original paint, tin work is all good, good 14.9x26 rear tires, 7.50x16 front tires, rear drawbar and PTO, new wiring and tune up, new gauges, new battery, stars and runs good; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Case S front axle assembly with wheels, wish bone, drag link, $100; Buck Evans 68-558-6918 (Greenville IL)

Case S tractor, nice tractor, good runner, $1200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Case SC parts, lots of parts from two parted out SC tractors. Tin work, fuel tank, grille, carburetor, steering gear box, engine parts, one nice pair of single rib 10x38 rear rims off SC; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

Case V rear wheel weights, $150; Buck Evans nnn-nnn-nnnn (Greenville IL)

Case VAC, 1946, no 3pt, like new paint, new rear tires, narrow front with tires at 80%, used as yard tractor; Earl Ming nnn-nnn-nnnn (Sandy OR)

Case/David Brown 990 Implimatic, power steering unit, working, but needs repair, 3pt works but is squirrely, new clutch and fuel pump, good tires front and rear, $3000 wins, can deliver to CA, OR or NV; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)

Caterpillar 10 belly pan and rock guard for track frame, all for $300; Larry nnn-nnn-nnnn (Dexter OR)

Caterpillar 10 Ensign carburetor complete, $700; Larry nnn-nnn-nnnn (Dexter OR)

Caterpillar 10, 20, 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)

Caterpillar 22 with 6 foot drag disc in good shape, $1600; Ron nnn-nnn-nnnn (Modesto CA)

Caterpillar D4, 1946, 5T3699, with blade and canopy, cracked main spring, did run, $850; Don Foltz nnn-nnn-nnnn (Scio OR)

Caterpillar parts/items: D4 roller seals, $2.50 each. Starter for starting engine on 14A or 17A, $30. Service manuals for 14A D8, 66A D9, $40 each. Power shift testing and adjusting DW10, D17000 engine, $40 each. Fuel rack setting tools for Cat engine, $40; Jim Ronsse nnn-nnn-nnnn (Chicago Park CA)

Caterpillar, possibly D4, mesh head lights, $50 each; Carol nnn-nnn-nnnn (Keno OR)

Cletrac AD crawlers, four total, two parts and two dozers, lost storage, must go to a new home; Warren Berg nnn-nnn-nnnn (North Highlands CA)

Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)

Co-Op C, mid 40s, starts and runs well, has decent paint with original cast iron badging, four cylinder, four speed, new rubber all around, $3100 obo after inspection, other tractors available; Dave Pembroke nnn-nnn-nnnn or xxxx@xxxx.xxx (Silverton OR)

Cores: Farmall H OEM carburetor and extra parts. Fairbanks Morse J four-cylinder magneto. Farmall H starter fuel tank has small dent. Farmall H fuel tank, no rust, used camera to look inside and in good shape. Carburetor right side throttle control for Farmall 300, 400 or M. Miscellaneous starters, generators, some bolt on, some cores, price includes shipping; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)

Cub Lowboy, 1956, 10 hp, two new tires and tubes on front, four wheel weights, three baffle gas cap, new steering wheel, aftermarket steps, new backrest, new seat, fresh oil filter and lube, older restoration, paint still good, two new valves, new rings and bearings, Donaldson air cleaner not shown, head lights and tail lights all work, has blade, plow, disks and landscape leveling rake, fast hitch, new late style oil fill tall cap, new starter, new throttle and the list goes on; $2500; Roger nnn-nnn-nnnn (Redding CA)

Earthmaster hi crop, new tires front and rear, runs and drives great, $1500; Lou nnn-nnn-nnnn (Jackson CA)

Fairbanks magneto, type FM XV4B7, $75 plus shipping, can text photos; Carol nnn-nnn-nnnn (Keno OR)

Farmall 400, row crop gas, has BG front end loader on it, engine turns over, has been sitting for five years, missing battery cover on one side, has wide front, $700; Matt O nnn-nnn-nnnn call or text (Ceres CA)

Farmall 450D, complete, not running, has fast hitch, TA, narrow front, needs tires, includes extra 450D parts tractor with single front, $900 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Farmall C, 1948, with add on 3pt, old Z tread rears, 11-36 at 60%, single front 6.00-16 at 90%, number one cultivating tractor for 15 years, very good shape, retiring from nursery farming, $2500; Earl Ming nnn-nnn-nnnn (Sandy OR)

Farmall Cub, 1948, wheel weights, calcium filled tires, front blade, plow, disc, manual controls, good tires, runs, garaged for last 40 years, no rust, $800; Jerald Jacobs nnn-nnn-nnnn (Washougal WA)

Farmall H rear skeleton wheels with lugs, good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall hi crop Super A, with hydraulics, runs well, starts easy, original condition, stored inside, tires hold air, good clutch, $2250 obo; Bob nnn-nnn-nnnn (Fresno CA)

Farmall M project, needs radiator replaced (included), has down flow exhaust, runs strong, also have some extra sheet metal and pieces included, FOB; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)

Farmall M, 1940, good sheet metal, decent tires and rims, $900; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall M, 1943, narrow front end, SN 66410, tractor is complete (less battery), restored by father 15 years ago and stored in a steel building, 6V, engine turns over but has no compression, valve lifters are rusty and stuck, photos available by email, $750, tractor located in Fallon NV; Steve Paulsen nnn-nnn-nnnn (Riverside CA)

Farmall M, 1945, runs good, good rubber, looks great, excellent paint and metal work, $2400; Ed Kellum nnn-nnn-nnnn (Monrovia CA)

Farmall parts: Fast Hitch to 3pt adapter, $150. Sheet metal from A to 450 plus miscellaneous parts. Super M, motor stuck, missing head, great project, $400; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Farmall Super C, 1954, with implements and extras; Al Barkl nnn-nnn-nnnn (Hazelton ID)

Farmall Super C, vegetable tractor, parts tractor, extra long rear axles and single front wheel, $200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

Farmall Super M, in good condition with a rebuilt carburetor, fresh paint, new wiring, tune up, fresh fluids, $2900 obo; Brennan Elszy 559-530-817 or xxxx@xxxx.xxx (Hanford CA)

Ferrari 76, great condition, bead blasted and painted, photos available, $5000; Kenneth Kapcoe nnn-nnn-nnnn (Goldendale WA)

Ford 2Ns, two available, high/low transmissions, new rear tires, fronts new but old, $1800 each; Earl Ming nnn-nnn-nnnn (Sandy OR)

Ford 420 loader backhoe or with Gannon scraper, backhoe needs cylinder repair, can supply parts or parts source, diesel engine runs strong, good shuttle transmission, need to sell with or without the hoe; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)

Ford 850 rear axle, from transmission back, complete, hydraulics, brakes good, pictures on request, $400; Lou nnn-nnn-nnnn (Jackson CA)

Ford 8N, 1951, comes with Ford 18 inch 1 bottom plow, easy start, runs good, no leaks and drives well, has been in the same family for last 40 years, good tin, original front bumper, new front tires, starter, radiator and brakes, $3200 obo; Howard Hatscheck nnn-nnn-nnnn no texts (Orangevale CA)

Ford 961, 1955, single front wheel, excellent condition, good rubber, $2500; Dave Davis nnn-nnn-nnnn (Battle Ground WA)

Ford 9N, 3pt lift control lever quadrant, early quadrant, as it is thicker aluminum, photos available by text, $200 plus photo ad and shipping; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)

Holder AG-3, runs and drives, pictures on request, $800; Lou nnn-nnn-nnnn (Jackson CA)

International 300 utility, 1956, with McCormac hydraulic loader with 72 inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

International 784, 74 hp, diesel, 3pt, dual PTO (540 and 1000 RPM), runs good, please call, don’t text, $6500; Aaron nnn-nnn-nnnn (Walnut Grove CA)

International Cub white grille, has hydraulics, good rubber, nice sheet metal, runs excellent, comes with blade, plow, disc, mower, lights, very nice tractor package deal, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)

International Hydro 70, 1975, high crop, gas, 13.6-38 rear tires at 70%, good fronts, really good cultivating tractor, retiring from nursery farming, $6500; Earl Ming nnn-nnn-nnnn (Sandy OR)

International I6, 1942, tires are fair, barn fresh, made for military with original military gray, now is multicolored, runs good, clutch is slightly sticky, unusual rear hubs and tires, rear tires are 13.6x24, military HD hitch, hood and grille good, driven it in a parade. Unique one of a kind tractor that only needs clean up and paint, $600; Wilbur Reil nnn-nnn-nnnn (Davis CA)

International TD6 parts, 1 complete and lots of other parts, $1 and up, all cheap or it goes to scrap; David Ruhland nnn-nnn-nnnn (Garden Grove CA)

International TD6 parts: radiator, equalizer springs, hood, left side final drive parts and miscellaneous parts, take them all for $500 or will sell individually; Larry nnn-nnn-nnnn (Dexter OR)

John Deere 1010, new generation collector tractor, like new with dealer rebuilt engine and clutch, new tires and powder coated wheels, new paint, seat and gauges. Will be shown at tractor show at Linn County Fairgrounds Albany OR on 11/12-11/14, $7500 obo; George nnn-nnn-nnnn (Albany OR)

John Deere 1010, new generation tractor, like new, dealer rebuilt engine and clutch, new tires and powder coated wheels, new paint, seat and gauges, will be shown at antique tractor show November 12-14 Linn Country Fairgrounds, compare to $15000 tractor listed on Tractor House, please make offer; George nnn-nnn-nnnn (Albany OR)

John Deere 2010, 1961, complete tractor, $750 or will part out; Phil Wall nnn-nnn-nnnn (Enumclaw WA)

John Deere 40S, 1953, starts easily, runs and drives well, hood and fenders are very nice, the grille could use some work, wheels are all very good, rear tires are excellent, hydraulics, 3pt, PTO work well, $2750, email for photos or Youtube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 420, crawler with manual tilt and angle blade, crawler set for 10 years, but starts and runs good, has some blowby, engine oil looks very good, engine sounds good, has a nice factory Carco winch on rear, canopy and undercarriage very good, four roller will need steering work from sitting, but crawler in nice condition for its age, as is, $4400; Joseph Giordano nnn-nnn-nnnn (Port Orchard WA)

John Deere 420, crawler with nice hydraulic blade, undercarriage very good, sheet metal good, steers great both ways, four roller undercarriage, very nice machine, PTO, $4500; Joseph Giordano nnn-nnn-nnnn (Port Orchard WA)

John Deere 420W, starts easily, runs and drives well, very good mechanical condition, sheet metal, transmission, wheels and tires all very good, hydraulics, 3pt, and PTO work as they should, engine overhauled about ten years ago and tractor has about 150 hours on it since, big bonus of factory power steering making it easy to drive, $3400, email for photos or Youtube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 440I, gas, wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt and side shift) work, decent tires and sheet metal is good, have original Blackwelder manuals as well as copies of the 440 manuals, $4800, email for photos or Youtube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere 5020, great condition, good tires, seat, $5500; James R Hayes Jr nnn-nnn-nnnn (Issaquah WA)

John Deere 630, row crop, low hours 3500, starts and runs perfectly, does not smoke or use oil, Roll-O-Matic, power steering, original 3pt hitch with original top link, third owner, new manifold set and complete valve job, very good rear tires, fronts are serviceable, only dents are in screen and only rust is in battery box, includes #45 loader, rebuilt lift cylinders, converted to hydraulic dump and includes a shop made forklift, reduced to $4000; Jim Temple nnn-nnn-nnnn (Noti OR)

John Deere 750 tractor loader and box scraper, 650 hours, excellent condition, newly service all fluids, pictures on request, $9200; Lou nnn-nnn-nnnn (Jackson CA)

John Deere A carburetor, $225; Buck Evans nnn-nnn-nnnn (Greenville IL)

John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch wheel cast centers, part # F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere B, 1940, SN 86763, new tires, runs good, $1500; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)

John Deere B, 1949, 3pt, single front, 12.4-38 rears, old paint from Idaho, runs well, $1900; Earl Ming nnn-nnn-nnnn (Sandy OR)

John Deere B, 1951, Roll-O-Matic, project tractor and have new parts to complete rebuild, $800; Phil Wall nnn-nnn-nnnn (Enumclaw WA)

John Deere BWH, one 1945 and one 1946 on spoke rear wheels, rough but the real thing with confirmed serial number search documents, only 280 of this model ever made, $1800 each or $3400 for both, email for photos or Youtube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere crawler parts: It all must go. Moving soon and it either sells go goes to scrap. M through 440 wheeled machines and MC to 420C; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere crawlers parts: new, used, NOS and reproduction parts for JD MC, 40, 420, 430, 440, 1010, 350, 450. Includes steering clutches, engine clutches, engine parts and kits, track rebushing service, gauges, gaskets, etc. Visit the website www.jdcrawlers.com; Larry Wilcox nnn-nnn-nnnn or xxxx@xxxx.xxx (Horace ND)

John Deere D, 1947, needs head gasket, $1500; Gary Collins nnn-nnn-nnnn or xxxx@xxxx.xxx (Petaluma CA)

John Deere DI, 1949, electric start, good tires, runs good, starts gas and runs on distillate, weighs 5250 lbs., $3000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)

John Deere G, 1938, SN 1875, unstyled, $6000; Jerry Hadeen nnn-nnn-nnnn (Tehachapi CA)

John Deere G, 1947, pan seat, only 2500 made, electric start, good metal, fair tires, need manifold gasket, $2750; Mark Parker nnn-nnn-nnnn (Lebanon OR)

John Deere GP, 1929, excellent runner, decent tires, call for info, $5250; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere H flywheel, no cracks, $125; Phil Wall nnn-nnn-nnnn (Enumclaw WA)

John Deere Lindeman crawler, new tracks, new valve grind, no welds or cracks, very nice original crawler, no blade, $7500; Don Chappell nnn-nnn-nnnn (St Helens OR)

John Deere Ls, 70s, skid steers, As, Bs, Ds, Hs; C Wallace nnn-nnn-nnnn (Toledo WA)

John Deere M, 1951, very good condition, complete, starts easy, runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2400, email for photos or Youtube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)

John Deere M, non-running engine, $500; Keith Busack nnn-nnn-nnnn (Longview WA)

John Deere MC idler wheels, two available, not perfect, old bearings remove, sandblasted and painted. Also, some adjusting parts, 2 screws with nuts, 1 housing, right side and a tool bar bracket to keep the spring in place, 2 springs, make offer; David Wagner nnn-nnn-nnnn (Oregon City OR)

John Deere MC, agricultural crawler, no dozer blade, it’s a farm crawler, original condition, good tracks, starts and runs good, $2500; Dick Benson nnn-nnn-nnnn (Grants Pass OR)

John Deere MC, second owner, incredible condition, must sell as moving soon; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)

John Deere R, late 40s, runs, works, good tires, needs restoration, pony motor needs rebuild, but will start main engine, $3500 obo or partial trade for 10 foot chisel plow. This is first of the two cylinder injected diesel; Kent Wooldridge nnn-nnn-nnnn or xxxx@xxxx.xxx (Lakeport CA)

Massey 65, gas, parting out, good engine; Buck Evans nnn-nnn-nnnn (Greenville IL)

Massey Ferguson 130 vineyard tractor, runs and drives, but needs some work. With sale, unit comes with another MF130 parts tractor. $2250 cash at the farm. Each has tags and numbers; Mike nnn-nnn-nnnn (Puyallup WA)

Massey Harris 22, 1951, narrow front with 3pt, 11.2-34 rear tires at 80%, fronts at 60%, nice paint, number two cultivating tractor, runs well, retiring from nursery, $2500; Earl Ming nnn-nnn-nnnn (Sandy OR)

Massey Harris 30, 1948, starts and runs with a little smoke, 38 inch rubber, unmatched, paint is good, $1250 obo after inspection, have other brands available; Dave Pembroke nnn-nnn-nnnn or xxxx@xxxx.xxx (Silverton OR)

Massey Harris 30, 1949, narrow front with older loader, no 3pt, 12.4-38 rear tires at 60%, like new fronts 6.50-16, nice shape, runs well; Earl Ming nnn-nnn-nnnn (Sandy OR)

Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Massey Harris 81, not stuck, needs tires, comes with MH 20 for parts, $1200; Gary Collins nnn-nnn-nnnn or xxxx@xxxx.xxx (Petaluma CA)

McCormick Deering F14, row crop and field, 2 each T20s, 10-20 Kay wheels; C Wallace nnn-nnn-nnnn (Toledo WA)

McCormick Deering W-4s, one stuck, one part stuck, decent shape, $900 for both; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick Deering WK-40, full steel, original engine free, $3500. I4, turns over, good shape, $800. O4, parting out, orchard belt pulley, shutters, plus miscellaneous; Mark Parker nnn-nnn-nnnn (Lebanon OR)

McCormick OS6, tires are shot, no magneto, engine stuck, parts tractor, you load and haul it’s FREE; Wilbur Reil nnn-nnn-nnnn (Davis CA)

McCormick W9, 1951, engine stuck, good rear rims, no rust, good 16.9-34 tires, live hydraulics, $300 obo; Tom nnn-nnn-nnnn (Sandpoint ID)

Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, four remotes, Amplitorque, good sheet metal, duals, rear main seal leak, can send pictures, $4450 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline GVI, 1960, diesel, 68 hp, 540 PTO, 23.1-26 rears, 7.50-18 fronts, cab with all glass, good sheet metal, two remotes, with nine foot Cancade hydraulic, two way, front blade, will sell with or without blade, blade available separately, can send pictures, $4450 with blade obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline UTU, 1946, restorable or for parts, never had it running, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Minneapolis Moline Z parts tractor, can send pictures, $250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Oliver 1755 high crop, diesel, runs good, 3pt and PTO, please call, don’t text, $10000; Aaron nnn-nnn-nnnn (Walnut Grove CA)

Oliver 660, 1960, row crop, gas, needs complete restoration, has side shields, has factory 3pt, wide front end, does not run, very hard to find tractor, $1500 obo; Matt O nnn-nnn-nnnn call or text (Ceres CA)

Oliver 70 parts: flat band front steel wheels, row crop wide front knees, belt pulley, manifold and miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Oliver 70 tractors, narrow fronts, one with fair tires, one tractor has a 5-timing gear motor. Lots of spare parts: starters, generators, heads, carburetors, one new piston and ring set, $1700 for all; Larry nnn-nnn-nnnn (Dexter OR)

Oliver 70, 1947, gas, industrial, parts tractor, engine is stuck, has some good parts left; Matt O nnn-nnn-nnnn call or text (Ceres CA)

Oliver 77 diesel, intake and exhaust manifold. Exhaust manifold for Oliver 88 with Oliver cast into it. Bolt on condition. Can supply gasket on request; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)

Oliver 88 row crop, 1948, engine stuck, $1200; Gary Collins nnn-nnn-nnnn or xxxx@xxxx.xxx (Petaluma CA)

Oliver OC3 Cletrac HG crawler parts, sheet metal, original grille, hoods, etc., starters, magnetos, etc. call or text for more info and prices; Joseph Giordano nnn-nnn-nnnn (Port Orchard WA)

Oliver OC4, rare, 60 gauge crawler with PTO, motor turns over, four cylinder Hercules gas, been sitting for years, good sheet metal, has a decent home made hydraulic blade which could easily be taken off, undercarriage about 60%, as is, very restorable machine, can ship, $2200; Joseph Giordano nnn-nnn-nnnn (Port Orchard WA)

Rims: Farmall or others, 10x38 with serviceable tires mounted. Will deliver to Western Continental United States; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)

Tire, 14.9-28, new, $225; Phil Wall nnn-nnn-nnnn (Enumclaw WA)

Tires, Wards Riverside Power Trac rears, 13-28, on flat spoke wheels (matching pair), solid castings, minor checking, holding air, $300 for the pair; Larry Schwartz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

Tractor collection liquidation, over 100, just about every make (except John Deere), call for wants, most rare makes and models, will be happy to email pictures for interested parties; Rich Kenny nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Redding CA)

Tractor tires for front: matched pair of 5.00-15 Carlisle brand, $80. Matched pair of 5.00-15 Titan brand, $80. Matched pair of 5.50-16 Retlas brand, $80. One 6.00-16 Field Mate brand, $40. Can bring to Woodland swap meet if interested; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)

Tractor tires: one 9.5R-36, has 45-degree lugs Kleber brand $200. One 11.2-36, replaces 10-36, has 45-degree bars Power Mark brand, $200. Can bring to Woodland swap meet if interested; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)

Wheels, 12.2-24, round spoke, very good shape tires, $500; Vern Fought nnn-nnn-nnnn (Exeter CA)