Alemite roll around pneumatic grease gun, cute, useful, $25; T. Van Tassel nnn-nnn-nnnn (Richmond CA)
Backhoe bucket, 12 inch, and front loader bucket, 80 inch, from older Case 580 backhoe, front loader bucket needs cutting blade, $500 each; Joseph Giordano nnn-nnn-nnnn (Port Orchard WA)
Bandsaw, horizontal, Jet HBS-10M, 10”x16” capacity with extra blades, $1500; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
Blade, universal for Farmall Cub, partially restored, $200; Dave Davis nnn-nnn-nnnn (Battle Ground WA)
Boat, Holt-Van, 12 foot, aluminum, 4 hp Mercury outboard, fuel tank, oars and miscellaneous boat stuff, $500 obo; Don Newton nnn-nnn-nnnn (San Miguel CA)
Book: Case Magneto, model 41, dealer service, $28; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Case Magnetos, instructions and operation and care, 1938, $1; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Case Magnetos, models 4-JMA and 4-CMA, dealer service, $28; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Case Magnetos, models 4-JMA, 4-CMA and 4-CAMA aircraft, parts manual, $7; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Caterpillar Track Type Machines Serial Number Reference book, 1925-1960. Indicates start and ending serial numbers, years manufactured, gauge, plant location, gas and diesel. Shows photos of each model and any paint color changes. All models are track type tractors, gas, diesel, loaders, and pipelayers. 62 pages, $25; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Cub, Cub Cadet lawn and garden and Farmall Cub. All models and serial number book, 1947-1974, $15; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Fairbanks Morse, Fundamentals of Magneto Ignition, $28; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Ford Tractors Serial Number and Production Models. Agricultural, industrial, and early lawn and garden, 1917-1979. Also includes full color picture foldout chart of the models, 1917-1983, $12; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: International Harvester Magnetos, service manual for International F-4, F-6, E4A, H-1, Wico H, Wico AH, Wico EK, Wico AP and Splitdorf (Dixie and Aero), $32; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: International Harvester Serial Number book. Includes interpretation of prefix letters, 1921-1953, $10; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: John Deere, serial numbers, Nebraska Tests, horsepower ratings, latest edition, 1918-1994, $25. Earlier editions from new condition and used, 1918-1976 and 1918-1987, ASAE publication, $15-$25; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Minneapolis-Moline Serial Number book, early 1900s-1970s, includes designated model MM tractors, lettered and numbered, also Avery, Twin City, chassis and engine serial numbers and MM equipment. Explains codes for first three digits, its application and the fourth- and fifth-digits codes for chassis serial numbers. Also, the engine serial number codes and the match to the correct engine. Nebraska tests, paint color codes and miscellaneous. 50 pages, $25; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Steiger 4 Wheel Drive Tractor Model Identification Guide 1969-1998. Serial numbers by model and year. Series 1-4, 1000, Wildcat, Bearcat, Cougar, Tiger, Panther, Powershift Series, etc. Photos, specifications, axle wheel end identification. 104 pages, $34; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: White Equipment “Family” Serial Number book, covering Oliver, Cletrac, Minneapolis-Moline, Cockshutt, Avery and White, 1901-1991. By Lloyd McCray, Field Supervisor for White-New Idea Farm Equipment Company. Tractors, engines, and equipment serial number range, years built, codes and their interpretations, plant names and production locations. 93 pages, $32; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Bridgeport vertical milling machine, J head style with 9”x44” table, 1 hp 3 phase motor, power feed on the X axis, mill has been totally repainted and rebuilt with new spindle bearings, feed nuts, felt wipers, etc. Price also includes some tooling and power phase converter to run-on single-phase power. The machine works great. Call or email for photos, $3500 obo; Bill Prine nnn-nnn-nnnn (Amity OR)
Brush hog, Hi-Co, rebuilt gear box, new bearings and seals, five foot wide, pictures on request, $500; Lou nnn-nnn-nnnn (Jackson CA)
Camp trailer, Cardinal, 1970s “Love Bird” 16 model, brand new tires this summer, original ice box, three burner stove/oven, sink, gas lights, electric lights, front dinette and rear convertible sofa bed. There are some issues that need attention, but it is a cool trailer that has not been hacked up. Plus, pink slip is in hand, good paper, $1250; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)
Cast iron surface plate, 12”x18”, 3 level feet, good shape, brass tag reads: The Challenge MCHY, picture available, heavy 55 lbs., $50; Ray Lohuis nnn-nnn-nnnn or xxxx@xxxx.xxx (Redding CA)
Caterpillar fuel rack setting tools, $50. Cat service manuals: D814A, D966A, power shift testing and adjusting 933, DW10, 17000 Cat engines, Cat sales magazines, $40 each; Jim Ronsse nnn-nnn-nnnn or xxxx@xxxx.xxx (Chicago Park CA)
Caterpillar track pump with fitting and lubricant, $125; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
Century Electric Co. motor, 1 hp, single phase, 1750 RPM, Pat. 1899, has flat belt pulley, set on adjustable cast base, make offer; Dave nnn-nnn-nnnn (Aurora OR)
Conveyors, two packaging conveyors, nine-foot, variable speed motors, $500 each; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
Farm implements: large rake, $450. Scraper boxes, old wheelbarrow, discs, other cool implements, let’s make a deal; Carol nnn-nnn-nnnn (Keno OR)
Ferguson hydraulic loader with manual trip bucket, complete, loader is off a TO30, can send pictures, $850 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Gas pump, 100-year-old Boyle Dayton previsible gas pump, missing lower sheet metal, but very solid nice-looking pump, $1000. Also have a very nice solid vintage Westinghouse large chest type Coke machine, has the two doors that fold upward, very nice solid machine and looks good, don’t know if it works, displays very nice, as is, $900; Joseph Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Gas pumps: two old Curbside hand gas pumps with stands, one you crank, the other pumps back and forth, both have dials, display as is or restore, came off apple orchards and were used to fill tractors and equipment. They stand about 6 feet tall, $300 for both; Joseph Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Generators, Onan, two-cylinder, 4000 watt, 110V, 4 KVA. Single cylinder, 2500 watt, 120V, 2.5 KVA, both load tested, these are runners, good shape, both are 12V electric start, $500 for both or $350 for the 4000 watt and $250 for the 2500 watt, pictures available; Ray Lohuis nnn-nnn-nnnn or xxxx@xxxx.xxx (Redding CA)
Hardinge dovetail lathe bed and spindle, $150; Jack Finzel nnn-nnn-nnnn (Vernonia OR)
Hardinge dovetail lathe bed cross slide, $75; Jack Finzel nnn-nnn-nnnn (Vernonia OR)
Hobart welder, Handler 140, wire feed, with tank, new, never used, $400; Jerry Weiler nnn-nnn-nnnn (Port Angeles WA)
Honda power mower, the first, old, heavy, $20; T. Van Tassel nnn-nnn-nnnn (Richmond CA)
Howard tube radio, old, powers on, will pick up AM stations, $100; Carol nnn-nnn-nnnn (Keno OR)
Hydraulic cylinder, John Deere B2161R, adjustable stops, looks ok, $50; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Hydraulic pump, air operated, $50. Air operated oil pump, Arrow brand, fits 55-gallon drums, $100; Jose Salazar nnn-nnn-nnnn (Albuquerque NM)
Industrial Iron Hog, Pirana, works good, you remove and haul, $1000; Carol nnn-nnn-nnnn (Keno OR)
International belly mount mower for Cub and A, $100; Dave Davis nnn-nnn-nnnn (Battle Ground WA)
International top link, has 375901-R-1 on it, one inch holes, 23 inches closed, $25; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Inverter, Teco/Westinghouse L510, change single phase to three phase power, new in box, did not use it, got new machine; Brook Field nnn-nnn-nnnn (Pe Ell WA)
Jib boom with air hoist, half ton, corner mount, $600; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
John Deere books and tools, too many to list, need to sell as moving to the burbs and can’t take it there. What doesn’t sell may end up as scrap; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)
John Deere cultivator parts: round shanks and flat shanks, clamps for diamond bars, spring loaded cultivator shanks to attach sweeps. Call for parts numbers and quantities, sold as lot only. $550 cash at the farm; Mike nnn-nnn-nnnn (Puyallup WA)
Lathe and mill tooling, lots of miscellaneous; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
Lathe, South Bend, 13”x48”, quick change gear box, chucks (three and four jaw), live center, tool bits, quick change tool post holder set, turret tail stock, many extra accessories, reduced price, $3500; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
Lodge and Shipley engine lathe, 22 inch swing, eight foot bed, $700, photos on request; Bob nnn-nnn-nnnn (Lafayette OR)
Magazine issues: Antique Power, Farm Collector, Red Power, Green Magazine, Old Allis News, several years of past issues, $50 or FREE to a good home, all dry and clean, u-load; Dave Davis nnn-nnn-nnnn (Battle Ground WA)
Meyer snow blade, six foot, can send pictures, $350 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline hydraulic loader, 68 inch bucket, complete, can send pictures, $850 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Mower, Ferguson side mount sickle bar, hydraulic lift, model FEO-35, $100; Jerry Van De Walle nnn-nnn-nnnn (Yamhill OR)
Mowers, John Deere #5, two units, $100; Keith Busack nnn-nnn-nnnn (Longview WA)
Newport 16 sailboat, swing keel pocket cruiser, complete, $400; T. Van Tassel nnn-nnn-nnnn (Richmond CA)
Paint for that winter project, new one gallon cans of Rust-Oleum Labor Saver industrial enamel, farm equipment green (John Deere color), $10/gallon; Bill nnn-nnn-nnnn (Lodi CA)
Patio boat, 1988, Sea Nymph, 17 foot, new deck and indoor/outdoor carpet, new furniture constructed, but not upholstered, stored in enclosed weather proof barn, boat licensed through 12/31/19 and trailer permanent license; Rick Kenny nnn-nnn-nnnn or nnn-nnn-nnnn or xxxx@xxxx.xxx (Redding CA)
Plow, John Deere 3-16 #F45, 3pt, slotted moldboard, excellent condition, $500; Dave Davis nnn-nnn-nnnn (Battle Ground WA)
Plow: Allis Chalmers 2-16 mounted plow for WD and WD45, $200; Dave Davis nnn-nnn-nnnn (Battle Ground WA)
Plows and some other equipment for John Deere, International, Minneapolis Moline, maybe others, too much to list; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Plows, two available, four bottom pull plows, $400; Keith Busack nnn-nnn-nnnn (Longview WA)
Porto power cylinders, various, 10-50 ton, price on request; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
Pressure washer/steam cleaner, Delco 5300, Vanguard 16 hp V-twin engine electric start, unit is on a floor base, has not run in 5 years so may need some TLC to get going, $200; Frank Busch nnn-nnn-nnnn (Morgan Hill CA)
Rod and piston out of a 3800 hp Alcoa diesel, rod and piston stand three feet tall, has a nine inch bore, $225; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
Ship anchor chain, over 300 feet, very old, 4-1/2 inch links, has a crosspiece in each link, displays nice or use, have two Danforth anchors that will be thrown in with it, $1500; Joseph Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Shop built tandem axle suspension similar to Miller 12000 lb. suspension, single wheels, Dodge hubs and brakes, $450; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
Snowmobile, 1968 20-inch Johnson, with trailer (Cutter), complete, $200 obo; T. Van Tassel nnn-nnn-nnnn (Richmond CA)
Tap and die set, Greenfield, includes tap drills, 1-1/8”, 1-1/4”, 1-1/2”, in original wooden carry case, never used, $150, pictures available, Ray Lohuis nnn-nnn-nnnn or xxxx@xxxx.xxx (Redding CA)
Tiny set of discs, wooden bearings, $20 obo; T. Van Tassel nnn-nnn-nnnn (Richmond CA)
Toro fruit sprayer, tiny iron Briggs, $20 obo; T. Van Tassel nnn-nnn-nnnn (Richmond CA)
Traffic light, restored on a stand, PC board available for electronic operation, $200. Wait/Walk light, restored on a stand, PC board installed and operating, $200; Les Wallace nnn-nnn-nnnn (Oak Grove OR)
Trailer, 93”x14’3”, single axle with dual wheels, good frame but no bed, factory made trailer, $200; Larry Busack nnn-nnn-nnnn or nnn-nnn-nnnn (Longview WA)
Trailer, engine display trailer, custom built, tandem axle, 6’x11’6” deck, 2-5/16 inch ball, jack, four extra tires, clean title, has four out riggers that can be lowered during running display to minimize trailer rocking, $1500, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
Trash pump, Homelite, two 3 inch and one 4 inch, section and discharge hoses, package price of $800; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
Walker-Turner floor model drill press, 1 hp, 22”x19.5” table, 8-foot column, 5 speed, #3 Morse taper spindle, excellent condition, $500; Jack Finzel nnn-nnn-nnnn (Vernonia OR)
Winch, B&B Model TM8-A, Ben’s truck parts, 150 feet of cable, $500; Vern Fought nnn-nnn-nnnn (Exeter CA)
Windmill, Fairbanks Morse, about 10 feet across, Automator motor, Fairbanks Morse sail, blades need straightening, all there but the tower, $1800 obo; Carol nnn-nnn-nnnn (Keno OR)
Wonder stucco mixer, used Cushman Cub, FREE; T. Van Tassel nnn-nnn-nnnn (Richmond CA)