Agritrac mini crawler, Wisconsin one-cylinder AEH engine, disc and pull blade attachments, running condition, $1500; George nnn-nnn-nnnn (Willows CA)
Allis Chalmers D17, 1957, gas, snap coupler 3pt, 18.4-28 rear tires, 70%, 6.00-16 fronts, 90%, good paint, runs well, retiring from farming, $3500; Earl Ming nnn-nnn-nnnn (Sandy OR)
Allis Chalmers G, 1949, less than 10 hours on complete engine rebuild, needs cleaning and painting, $3500 firm; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
Allis Chalmers M crawlers, 1936, WM2453, very good condition, $2300. 1941 WM11632, not running, cracked block, old repair, $550; Don Foltz nnn-nnn-nnnn (Scio OR)
Allis Chalmers Monarch 35, parting out. Also parting Minneapolis M5 diesel; Buck Evans nnn-nnn-nnnn (Greenville IL)
Allis Chalmers WD and WD45, both are parts tractors but complete, think one is runnable, $600 obo for the pair; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Allis Chalmers WD, 1949, SN 11383, rare model with single front tire (new 5.5x10”), runs great, carburetor and fuel system recently cleaned, 12V, new battery, magneto, adjustable rear wheels, pin coupler hitch, restored 15 years ago, located in Riverside CA, photos upon request via email, $1800 obo; Steve Paulsen nnn-nnn-nnnn leave message or xxxx@xxxx.xxx (Riverside CA)
Auto Patrol road graders, have two, one is parts machine and the other runs and operates, tires are poor, has Caterpillar 20 engine in it, both for $2300 obo; Rick nnn-nnn-nnnn (Truckee CA)
Backhoe, 3pt, recommended for 18-30 hp, came off wife’s John Deere 4100 tractor, but she wants it gone. $2400 obo; Al nnn-nnn-nnnn (Sacramento CA)
Case 300, 1956, parting out or buy as is, block has a hole in it; Richard Brunk nnn-nnn-nnnn (Raymond WA)
Case 310, good condition, new front tires, rears at 90%, runs great and everything works, has over/under drive transmission and 3pt hitch, pictures on request, $2200; Lou nnn-nnn-nnnn (Jackson CA)
Case 430, 1968, gas tractor, 8 speed, 540 independent PTO, cat 1 3pt, good 14.9x24 rear tries with rear weights, 6.50x16 front tires, new rims all the way around, new battery, starts and runs good, $2500; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case 4JM magneto, rebuilt and guaranteed, $300; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case 600 Wheatland, six-cylinder diesel engine free, nice shape, low production, $2000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case 801B, mostly complete, unstyled, hood very nice, fenders a few dents but not rotted out, $750; John Nye nnn-nnn-nnnn (Delta UT)
Case C tractors, one on rubber and one on steel, believed to both be runners, $1000 obo for the pair; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case crawler forklift Model M3B, very rare, made in the late 50s, very good undercarriage, four cylinder gas engine, factory built from the 310 crawler, mast goes up about 17 feet, owned for over 20 years, very nice shape for its age, probably one of the nicest in existence, runs and steers good, only about 80 were made, pictures upon request, $9500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Case D, engine stuck but very complete tractor, comes with rear mounted Case five-foot sickle bar mower, both for $300; John Nye nnn-nnn-nnnn (Delta UT)
Case D, good runner, decent tires, $1200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case DV, 1948, vineyard tractor, original paint, tin work is all good, good 14.9x26 rear tires, 7.50x16 front tires, rear drawbar and PTO, new wiring and tune up, new gauges, new battery, stars and runs good; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case L, 1930, on steel wheels, runs, $1000; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Case LAIM, LA industrial military, one mostly complete, two for parts, have rebuilt radiator, shutter and one air compressor, have air brakes and were used as tugs at Wendover Air Force base, speculation is that one may have pulled the Enola Gay out of its hanger to deliver payload to Japan in WWII, enough parts to make one complete LAIM, $2500 for all three and parts; John Nye nnn-nnn-nnnn (Delta UT)
Case S front axle assembly with wheels, wish bone, drag link, $100; Buck Evans 68-558-6918 (Greenville IL)
Case S tractor, nice tractor, good runner, $1200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case SC parts, lots of parts from two parted out SC tractors. Tin work, fuel tank, grille, carburetor, steering gear box, engine parts, one nice pair of single rib 10x38 rear rims off SC; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case SC, five total, all narrow front, hand clutch, some with Eagle hitch, one has pretty decent green Case front end loader that is in nice condition, not much welding, bucket not quite as nice but intact, none are in running condition but could come up with two to three that would run from the assortment, all probably have stuck engines, running out of time to work on them, $1000 for all five; John Nye nnn-nnn-nnnn (Delta UT)
Case SO, 1950, good condition, $3350 obo; Ralph nnn-nnn-nnnn (Sacramento CA)
Case V rear wheel weights, $150; Buck Evans nnn-nnn-nnnn (Greenville IL)
Case VAC, 1946, no 3pt, like new paint, new rear tires, narrow front with tires at 80%, used as yard tractor; Earl Ming nnn-nnn-nnnn (Sandy OR)
Case VAC, three that are mostly complete, one with Case loader that’s not pristine, some have Eagle hitches, includes two more VACs in pieces with one wide front end, $750 takes all; John Nye nnn-nnn-nnnn (Delta UT)
Case WD, runs, wide front, power steering, tires ok, $750; Fred nnn-nnn-nnnn (Bandon OR)
Case, 10-20, 1917; Buck nnn-nnn-nnnn (Ellensburg WA)
Case/David Brown 990 Implimatic, power steering unit, working, but needs repair, 3pt works but is squirrely, new clutch and fuel pump, good tires front and rear, $3000 wins, can deliver to CA, OR or NV; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Caterpillar 10, 20, 30 parts; Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar 28 for sale, runs and drives well, sheet metal is in good shape, undercarriage is decent, stored inside, pictures on request, $2200 obo; Rick nnn-nnn-nnnn (Truckee CA)
Caterpillar D2, orchard, SN 5J2476SP, runs good, barn stored, $2500; Lyell nnn-nnn-nnnn (Squaw Valley CA)
Caterpillar D4 tract roller seals; Jim Ronsse nnn-nnn-nnnn (Chicago Park CA)
Caterpillar D4, 1946, 5T3699, with blade and canopy, cracked main spring, did run, $850; Don Foltz nnn-nnn-nnnn (Scio OR)
Caterpillar D7 3T series, 1948, runs great, electric start pony that runs well, hydraulic assist steering and forward/reverse lever, undercarriage is good, grousers are a little low, small oil leak on one final drive and radiator has a few small leaks to be fixed, bare with no attachments or accessories, needs to go by spring as storage has been lost, $3500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar D8 with dozer blade. Have other heavy equipment/tractors, just ask; Mike nnn-nnn-nnnn (Buckley WA)
Caterpillar parts/items: D4 roller seals, $2.50 each. Starter for starting engine on 14A or 17A, $30. Service manuals for 14A D8, 66A D9, $40 each. Power shift testing and adjusting DW10, D17000 engine, $40 each. Fuel rack setting tools for Cat engine, $40; Jim Ronsse nnn-nnn-nnnn (Chicago Park CA)
Clark aircraft tug, 1943, for Army Air Corp., ran when parked, can text photos, $600; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Cletrac AD crawlers, four total, two parts and two dozers, lost storage, must go to a new home; Warren Berg nnn-nnn-nnnn (North Highlands CA)
Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac W25, 1920, with rubber pads; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Cletrac, 1922, Model F, SN 1545-36, older restoration, should start, hasn’t run in 10-12 years, extra parts included, $4500; Jack Mulkey nnn-nnn-nnnn or xxxx@xxxx.xxx (Calistoga CA)
Co-Op C, mid 40s, starts and runs well, has decent paint with original cast iron badging, four-cylinder, four speed, new rubber all around, $3100 obo after inspection, other tractors available; Dave Pembroke nnn-nnn-nnnn or xxxx@xxxx.xxx (Silverton OR)
Cores: Farmall H OEM carburetor and extra parts. Fairbanks Morse J four-cylinder magneto. Farmall H starter fuel tank has small dent. Farmall H fuel tank, no rust, used camera to look inside and in good shape. Carburetor right side throttle control for Farmall 300, 400 or M. Miscellaneous starters, generators, some bolt on, some cores, price includes shipping; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Earthmaster hi crop, new tires front and rear, runs and drives great, $1500; Lou nnn-nnn-nnnn (Jackson CA)
Emerson AA tractor parts; Buck nnn-nnn-nnnn (Ellensburg WA)
Farmall 230, wide front, runs good, fast hitch, lift frames for cultivators on front, rear tires good, narrow front included, $1500; Dave nnn-nnn-nnnn (Scotia CA)
Farmall 450D, complete, not running, has fast hitch, TA, narrow front, needs tires, includes extra 450D parts tractor with single front, $900 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Farmall C or Super C, mounted front cultivator, most of a Fast hitch, engine is stuck, very straight complete tractor, can’t find SN, $700; John Nye nnn-nnn-nnnn (Delta UT)
Farmall C, 1948, with add on 3pt, old Z tread rears, 11-36 at 60%, single front 6.00-16 at 90%, number one cultivating tractor for 15 years, very good shape, retiring from nursery farming, $2500; Earl Ming nnn-nnn-nnnn (Sandy OR)
Farmall Cub engine parts; Don Roberts nnn-nnn-nnnn (Crooked River Ranch OR)
Farmall Cub swinging drawbar, $140. U shaped draw bar, $90; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
Farmall Cub with hydraulics, two new rear tubes to install, good rims both front and rear, engine has good compression, sheet metal and original paint, hasn’t been started recently but is a runner, $775, paid $1850 for this tractor 7 years ago, photos only with serious buyers by request and sent by phone; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
Farmall Cub, 1948, wheel weights, calcium filled tires, front blade, plow, disc, manual controls, good tires, runs, garaged for last 40 years, no rust, $800; Jerald Jacobs nnn-nnn-nnnn (Washougal WA)
Farmall F series decals, commercial grade, die cut, vinyl decals for pre 1939 Farmalls and McCormick Deerings, correct size, colors and fonts for Regulars, F20/F30, F12/F14. Engine sets for W, I and O models of McCormick Deering. Individual decals or complete sets, call for prices; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Georgetown CA)
Farmall F20, new tires, motor stuck from sitting, minor weather checking on tires; Bill Elzey nnn-nnn-nnnn (Touchet WA)
Farmall H parts: transmission, rear rend, front axle and rear wheels; Don Roberts nnn-nnn-nnnn (Crooked River Ranch OR)
Farmall H, runs, new tires, about 1949; Bill Elzey nnn-nnn-nnnn (Touchet WA)
Farmall hi crop Super A, with hydraulics, runs well, starts easy, original condition, stored inside, tires hold air, good clutch, $2250 obo; Bob nnn-nnn-nnnn (Fresno CA)
Farmall International Low Boy Cub, narrow, runs good, barn stored, $1100; Lyell nnn-nnn-nnnn (Squaw Valley CA)
Farmall M project, needs radiator replaced (included), has down flow exhaust, runs strong, also have some extra sheet metal and pieces included, FOB; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Farmall M, 1940, good sheet metal, decent tires and rims, $900; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall M, 1945, runs good, good rubber, looks great, excellent paint and metal work, $2400; Ed Kellum nnn-nnn-nnnn (Monrovia CA)
Farmall M, rebuilt everything, all new parts, new rear tire, original paint, $2550; Mike nnn-nnn-nnnn (Buckley WA)
Farmall Super C, vegetable tractor, parts tractor, extra long rear axles and single front wheel, $200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Ferrari 76, great condition, bead blasted and painted, photos available, $5000; Kenneth Kapcoe nnn-nnn-nnnn (Goldendale WA)
Ford 2N, 1944, original 6V, starts easy, tires fair, needs paint, $1200; Fred nnn-nnn-nnnn (Bandon OR)
Ford 2N, 8N, 9N parts: fenders, used, decent, $30 each. One with script and frame, $35;
Ford 2Ns, two available, high/low transmissions, new rear tires, fronts new but old, $1800 each; Earl Ming nnn-nnn-nnnn (Sandy OR)
Ford 420 loader backhoe or with Gannon scraper, backhoe needs cylinder repair, can supply parts or parts source, diesel engine runs strong, good shuttle transmission, need to sell with or without the hoe; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Ford 850 rear axle, from transmission back, complete, hydraulics, brakes good, pictures on request, $400; Lou nnn-nnn-nnnn (Jackson CA)
Ford 871, diesel, Select-O-Speed transmission, for parts, no injector pump, $250; John Nye nnn-nnn-nnnn (Delta UT)
Ford 8N, original tractor with Ford script on fenders, pretty rusty old dairy tractor, runs, has no compression on cylinder one, $600; Chris Carl nnn-nnn-nnnn (Stanwood WA)
Ford 9N, 1941, ready for parade or display, 6V, starts and runs great, new tires, $2150; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, 2N, 8N used parts, some new wiring harnesses; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, 3pt lift control lever quadrant, early quadrant, as it is thicker aluminum, photos available by text, $200 plus photo ad and shipping; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)
Ford 9N, Howard Rotovator and auxiliary hydraulics, 1940 Sherman over/under and Howard gear reduction, $3200; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, Sherman step up/down transmission, no radiator, rough, $200; John Nye nnn-nnn-nnnn (Delta UT)
Ford Jubilee, new rear rim, $1650; Mike nnn-nnn-nnnn (Buckley WA)
Ford/Ferguson BNO 40 aircraft tug, mostly complete and was running when parked, includes all tug parts and additional engine block with transmission, additional chassis (engine, transmission, rear end), extra fuel tank and radiator (pent top thermosyphon), extra hood, $2500, can text photos; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Fordson gas tanks, no dents, one looks good, $75. One needs repair, $30;
Fordson steel wheels; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Fordson, 1920, on steel, $1500; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Fordson, 1923, on steel wheels, mostly complete, radiator and gas tank tested, engine dismantled, two distributors, good buzz coils and box, intake/exhaust manifold and carburetor, new steering wheel wood, front wheels sand blasted and painted, other parts blasted and painted, $250; Ray Bathrick nnn-nnn-nnnn (North Bend OR)
Holder AG-3, runs and drives, pictures on request, $800; Lou nnn-nnn-nnnn (Jackson CA)
Howard gear reduction for Ford 9N, 2N, 8N, $500-$1000; Fred nnn-nnn-nnnn (Bandon OR)
International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International 784, 74 hp, diesel, 3pt, dual PTO (540 and 1000 RPM), runs well, please call, don’t text, $6500; Aaron nnn-nnn-nnnn (Walnut Grove CA)
International 966, hydro, good tires, doesn’t run, $500; Bill Elzey nnn-nnn-nnnn (Touchet WA)
International Cub white grille, has hydraulics, good rubber, nice sheet metal, runs excellent, comes with blade, plow, disc, mower, lights, very nice tractor package deal, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)
International Hydro 70, 1975, high crop, gas, 13.6-38 rear tires at 70%, good fronts, really good cultivating tractor, retiring from nursery farming, $6500; Earl Ming nnn-nnn-nnnn (Sandy OR)
International M, runs; Bill Elzey nnn-nnn-nnnn (Touchet WA)
International Super A parts: rear weights, $160 for the pair. Super A swinging drawbar, $190, U shape, $130; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
International Super A, good sheet metal, all tires and rims good, carburetor and starter rebuilt, 3pt hitch, drawbar, rear wheel weights, raised in dry Eastern WA, ready for minor restore including finish up touchup painting, used recently to grade driveways, $2150; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
International Super A, good sheet metal, rims and tires, engine has good compression, been in original owner’s barn for 30 years, very easy restore or for active farming, factory plow and 3pt hitch, discount will be considered for any active FFA member, $2150; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx for photos (Olympia WA)
International TD6 parts, 1 complete and lots of other parts, $1 and up, all cheap or it goes to scrap; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
International TD6 parts: radiator, equalizer springs, hood, left side final drive parts and miscellaneous parts, take them all for $500 or will sell individually; Larry nnn-nnn-nnnn (Dexter OR)
International TD9, with dozer blade, ran when parked, $1200; Bill Elzey nnn-nnn-nnnn (Touchet WA)
JD 310C tractor/loader/backhoe, engine work complete, crankshaft has been ground, cylinder head rebuilt, injector pump and starter rebuilt, needs engine kit and assembly, $1500; John Nye nnn-nnn-nnnn (Delta UT)
John Deere 1010, new generation collector tractor, like new with dealer rebuilt engine and clutch, new tires and powder coated wheels, new paint, seat and gauges. Will be shown at tractor show at Linn County Fairgrounds Albany OR on 11/12-11/14, $7500 obo; George nnn-nnn-nnnn (Albany OR)
John Deere 2010, 1961, complete tractor, $750 or will part out; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
John Deere 40, all new parts, rear wheels painted plus grille, $3000; Mike nnn-nnn-nnnn (Buckley WA)
John Deere 420, crawler with manual tilt and angle blade, crawler set for 10 years, but starts and runs good, has some blowby, engine oil looks very good, engine sounds good, has a nice factory Carco winch on rear, canopy and undercarriage very good, four roller will need steering work from sitting, but crawler in nice condition for its age, as is, $4400; Joseph Giordano nnn-nnn-nnnn (Port Orchard WA)
John Deere 420, crawler with nice hydraulic blade, undercarriage very good, sheet metal good, steers great both ways, four roller undercarriage, very nice machine, PTO, $4500; Joseph Giordano nnn-nnn-nnnn (Port Orchard WA)
John Deere 420, crawler with straight blade, runs and drives but has low oil pressure, hydraulic pump cracked, left steering clutch is stuck and tracks are stiff, missing left fender, cylinder bracket and seat mounts, rails, pins and bushings and finals are good, $1400; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere 420W, starts easily, runs and drives well, very good mechanical condition, sheet metal, transmission, wheels and tires all very good, hydraulics, 3pt, and PTO work as they should, engine overhauled about ten years ago and tractor has about 150 hours on it since, big bonus of factory power steering making it easy to drive, $3400, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 440I, gas, wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt and side shift) work, decent tires and sheet metal is good, have original Blackwelder manuals as well as copies of the 440 manuals, $4800, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 5020, great condition, good tires, seat, $5500; James R Hayes Jr nnn-nnn-nnnn (Issaquah WA)
John Deere 630, row crop, low hours 3500, starts and runs perfectly, does not smoke or use oil, Roll-O-Matic, power steering, original 3pt hitch with original top link, third owner, new manifold set and complete valve job, very good rear tires, fronts are serviceable, only dents are in screen and only rust is in battery box, includes #45 loader, rebuilt lift cylinders, converted to hydraulic dump and includes a shop made forklift, reduced to $4000; Jim Temple nnn-nnn-nnnn (Noti OR)
John Deere 70, diesel, starting engine, big engine loose, tricycle front end mostly complete, owned by Farmer Blue not Farmer Fowler, $2000; John Nye nnn-nnn-nnnn (Delta UT)
John Deere 750 tractor loader and box scraper, 650 hours, excellent condition, newly service all fluids, pictures on request, $9200; Lou nnn-nnn-nnnn (Jackson CA)
John Deere A carburetor, $225; Buck Evans nnn-nnn-nnnn (Greenville IL)
John Deere A, B, G, 60, 720 parts: Blocks, heads, carburetors, magnetos, sheet metal; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere A, five total, all not running in various stages of disrepair, one has very nice JD 7-1/2 foot mounted cable lift snowplow, tractor has long axles, also includes mounted Wagner model WM1-JDAB front end loader, not much welding, bucket needs some work, loader is currently mounted also on a non-running A, $1200 takes all; John Nye nnn-nnn-nnnn (Delta UT)
John Deere B, 1949, 3pt, single front, 12.4-38 rears, old paint from Idaho, runs well, $1900; Earl Ming nnn-nnn-nnnn (Sandy OR)
John Deere B, 1951, Roll-O-Matic, project tractor and have new parts to complete rebuild, $800; Phil Wall nnn-nnn-nnnn (Enumclaw WA)
John Deere BR on steel, runs, lowered price, $4200; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
John Deere BWH, one 1945 and one 1946 on spoke rear wheels, rough but the real thing with confirmed serial number search documents, only 280 of this model ever made, $1800 each or $3400 for both, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere collection: JD 50, nice straight tractor, 36-inch rear tires, $1750. JD L, hand start, no tag, runs and drives, $1500. JD AN, 1940, new 36-inch rear tires with round spoked wheels, single front, runs, $1500. JD D, 1937, $2000. JD AW, 1945, ant eater front, $900. JD AN, 1952, 42-inch rears, single front, $800. JD B, 1935, $1500. JD H, 1942, $1750; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere crawler parts: It all must go. Moving soon and it either sells go goes to scrap. M through 440 wheeled machines and MC to 420C; Ralph Newman nnn-nnn-nnnn (Wolf Creek OR)
John Deere crawlers parts: new, used, NOS and reproduction parts for JD MC, 40, 420, 430, 440, 1010, 350, 450. Includes steering clutches, engine clutches, engine parts and kits, track rebushing service, gauges, gaskets, etc. Visit the website www.jdcrawlers.com; Larry Wilcox nnn-nnn-nnnn or xxxx@xxxx.xxx (Horace ND)