Alamo Blue line, 2-1/2 hp, everything was bead blasted and painted, needs some partial assembly, comes with a Webster K magneto, only repair seen is on magneto bracket, looks to be very well done, $450 obo; Craig Mathews nnn-nnn-nnnn (Northridge CA)
Briggs and Stratton engines, three to eight horsepower, all complete for mowers, pumps, etc. all priced under $50; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
Christensen, 5 hp, side shaft, SN 6695, original finish on fabricated steel truck, starts easy, runs very slow; Gerry nnn-nnn-nnnn (Eatonville WA)
Cushman Binder engine, older restoration, $200; Tom Dessert nnn-nnn-nnnn (Ridgefield WA)
Cushman, 4 hp, one flywheel and clutch on the other side for four-inch belting, turns over, $300; Ray Bathrick nnn-nnn-nnnn (North Bend OR)
Cushman, 5-6 hp, vertical, restored, $450, photos on request; Bob nnn-nnn-nnnn (Lafayette OR)
Detroit engine, 92 series starter, $50 obo; Jim Ronsse nnn-nnn-nnnn (Chicago Park CA)
Doak, 5 hp, $9200; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Economy XK, 4 hp, EK magneto, nice pulley, has compression, nice shop built cart, reproduction muffler, no cracks/breaks/welds can be seen, restored, good paint, show ready with a little TLC, engine hasn’t run for a while, $650; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Economy, 1-1/2 hp, Webster magneto, needs restoration, $350; Tom Dessert nnn-nnn-nnnn (Ridgefield WA)
Economy, 4 hp, early, square hopper, on cart, $1000, photos on request; Bob nnn-nnn-nnnn (Lafayette OR)
Economy, 6 hp, early, square hopper, restored, $2000, photos on request; Bob nnn-nnn-nnnn (Lafayette OR)
Engine collection: six John Deere 1-1/2 hp. Two Sattley 1-1/2 hp. International Harvester 1-1/2-2-1/2 hp with air cleaner. Novo 2 hp. Stover 3 hp. Associated 1-1/2 hp. McCormick Deering 1-1/2 hp. Stover 2-2-1/2 hp law tractor, must see. JD 1-1/2 hp, partially rebuilt. Packaged deal, all or none. All are loose, most have carts (trucks), “Not Junk”, $10000 for all; Chuck nnn-nnn-nnnn (John Day OR)
Engine collection: two Stovers, one Alamo, one Fairbanks Morse, two Internationals, one New Way vertical, one 4 hp Lawson Frost King on original cart, all in great shape, pictures on request; Jess Riker nnn-nnn-nnnn (Beaver UT)
Fairbanks generator set, small, electric start, $300, photos on request; Bob nnn-nnn-nnnn (Lafayette OR)
Fairbanks Morse Z, 15 hp, tank cooled, older restoration, $1800; Tom Dessert nnn-nnn-nnnn (Ridgefield WA)
Fairbanks Morse Z, 6 hp, very hot magneto, engine mounted on highly varnished wood runners, older restoration by master craftsman Paul Pearman who was entrusted to restore antique luxury cars belonging to Jay Leno, $1125; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
Fairbanks Morse, 1-1/2 hp, unrestored, $250; Tom Dessert nnn-nnn-nnnn (Ridgefield WA)
Fairbanks Morse, 2 hp, dishpan, excellent shape, no cracks, no welds, new rings, valves, gas tank, runs well, on wheels, $650; Dan Landers nnn-nnn-nnnn (Vallejo CA)
Fairbanks Morse, 6 hp, unrestored, $300; Tom Dessert nnn-nnn-nnnn (Ridgefield WA)
Fairbanks type R magneto, very hot spark, drive gear very good, $325; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
Fairbanks, 1-1/2 hp dishpan parts engine, $50; Dave nnn-nnn-nnnn (Aurora OR)
Field Brundage, 1-1/2 hp?, no tag, no gas tank, no magneto, has ignitor/timing bracket, no oiler, on skids, no cracks/breaks/welds seen, $350; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Fuller and Johnson pump jack engine with new fuel tank with newly foundered gas mix valve, $875; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
Gardner 1L2, 10 hp, single cylinder diesel, starts easy and runs great, on steel truck; Gerry nnn-nnn-nnnn (Eatonville WA)
Hercules IXB5 with clutch and starter, $200 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Hercules Type FW, 1-3/4 hp, Webster magneto, have a new fuel tank for it, should run with a little effort, $600; Craig Mathews nnn-nnn-nnnn (Northridge CA)
International 135, has clutch, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
International Famous, 4 hp, 1910, hit and miss, ignitor ignition, hopper cooled, on nice cart, runs good, can send pictures, $4300; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
John Deere, 1-1/2 hp, early big brass tag, $600; Tom Dessert nnn-nnn-nnnn (Ridgefield WA)
Maytag engines for sale, five 92s and one upright, pictures on request, $250-$750; Jess Riker nnn-nnn-nnnn (Beaver UT)
Meco Manufactures Engine Co., 2 hp, headless, nice paint, low on compression, battery box with buzz coil, no cracks/breaks/welds can be seen, no muffler, on wheels, show ready with a little TLC, engine hasn’t run in a long while, $600; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Olds Type A, 4 hp, carburetor and fuel pump are there, unrestored, $3500; Tom Dessert nnn-nnn-nnnn (Ridgefield WA)
R.A. Lister, 5 hp, vertical, ball hopper, restored, $1500, photos on request; Bob nnn-nnn-nnnn (Lafayette OR)
Samson, 6 hp, on iron wheel cart, painted, runs on gasoline, has been shown many times, $6000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Sandwich Model AB, 1-1/2 hp, EK magneto, restored, has cracked crankshaft bearing cap, previous owner said it ran fine the way it is, nice paint, on wheels, show ready with a little TLC, engine hasn’t been run for a long time, $575; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Schmidt chill cylinder, 1-1/2 hp type B, rare, 1908, $3200 obo; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Schmidt chill cylinder, 3 hp type H, SN X7597, 1907, buzz coil, $2500; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Seager Olds, 1910-1911 Type A hopper cooled engine, barn fresh, complete engine, including original battery box and original pulley, can go with or without cart, $2500 obo; Craig Mathews nnn-nnn-nnnn (Northridge CA)
Sheldon, 2 hp, complete, has Webster magneto, crank guard, belt pulley, good compression, barn fresh, nice little rare engine, $600; Dave nnn-nnn-nnnn (Aurora OR)
SieverKropp, 1/2 hp, horizontal, two stroke engine, nice older restoration, runs, complete engine, no CBWs, comes with a nice buzz coil, $1700, can ship; Craig Mathews nnn-nnn-nnnn (Northridge CA)
Sparta Economy, 2 hp, good compression, still had long crank shaft, older restoration, good paint, no cracks/breaks/welds can be seen, on nice shop built cart, no muffler, will need a coil and battery, has good tag, ready to show with a little TLC, has not been running in a long time, $650; Jim Beeler nnn-nnn-nnnn or xxxx@xxxx.xxx (Tacoma WA)
Stickney, 1-3/4 hp, fuel pump, clutch pulley, brass piping, new cylinder sleeve, reproduction riveted truck; Gerry nnn-nnn-nnnn (Eatonville WA)
Stickney, 3 hp, fuel pump, clutch pulley, brass piping, new cylinder sleeve, paint is Stickney Blue on reproduction riveted truck; Gerry nnn-nnn-nnnn (Eatonville WA)
Stover CT 2, Wico EK magneto, $225; Tom Dessert nnn-nnn-nnnn (Ridgefield WA)
Stover, 1 hp, Model T, has separator gear, $700; Tom Dessert nnn-nnn-nnnn (Ridgefield WA)
Stover, 10 hp, hopper cooled, Webster magneto, restored, $6000, photos on request; Bob nnn-nnn-nnnn (Lafayette OR)
Stover, 2 hp, Wico magneto, closed crank case, on nice cart, $650; Dan Landers nnn-nnn-nnnn (Vallejo CA)
Stover, 4 hp, SN T37922 model T, mounted on an engine truck, restored, $1000; Tom Dessert nnn-nnn-nnnn (Ridgefield WA)
Wade draw saw, magneto and all there, ran a year ago, stored inside, $400; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Waterloo Boy, 4 hp, restored, $1000, photos on request; Bob nnn-nnn-nnnn (Lafayette OR)
Wisconsin engines, one- and two-cylinder complete engines with magnetos, just too numerous to list, you will need to inspect; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
Wisconsin two-cylinder, electric start, complete, used in concrete saw, $250; Bernie Swetz or xxxx@xxxx.xxx nnn-nnn-nnnn (Santa Rosa CA)
Wisconsin V4 from hay bailer with clutch and starter, $300 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)