Agritrac mini crawler, Wisconsin one-cylinder AEH engine, disc and pull blade attachments, running condition, $1500; George nnn-nnn-nnnn (Willows CA)
Allis Chalmers WD, 1949, SN 11383, rare model with single front tire (new 5.5x10”), runs great, carburetor and fuel system recently cleaned, 12V, new battery, magneto, adjustable rear wheels, pin coupler hitch, restored 15 years ago, located in Riverside CA, photos upon request via email, $1800 obo; Steve Paulsen nnn-nnn-nnnn leave message or xxxx@xxxx.xxx (Riverside CA)
Allis Chalmers WD, runs, wide front, power steering, tires ok, $750; Fred nnn-nnn-nnnn (Bandon OR)
Auto Patrol road graders, have two, one is parts machine and the other runs and operates, tires are poor, has Caterpillar 20 engine in it, both for $2300 obo; Rick nnn-nnn-nnnn (Truckee CA)
Case 801B, mostly complete, unstyled, hood very nice, fenders a few dents but not rotted out, $750; John Nye nnn-nnn-nnnn (Delta UT)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of other parts. Case C, S, or R&H HC245 rear round spoke wheels, 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case D, engine stuck but very complete tractor, comes with rear mounted Case five-foot sickle bar mower, both for $300; John Nye nnn-nnn-nnnn (Delta UT)
Case DC-4 with heart shaped front end, hand clutch, live PTO, hydraulic and Eagle hitch, runs, needs some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DV or hard tractor, 1948, real good 14.9x26 rear tires, front tires still good, rear weights, PTO, new wiring, battery and gauges, starts and runs good, original straight tin work, no rust, $1450; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case L, 1930, on steel wheels, runs, $1000; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Case L, 1937, runs good, we’ve been pull starting, $3000; Aaron nnn-nnn-nnnn no text leave message (Isleton CA)
Case LAIM, LA industrial military, one mostly complete, two for parts, have rebuilt radiator, shutter and one air compressor, have air brakes and were used as tugs at Wendover Air Force base, speculation is that one may have pulled the Enola Gay out of its hanger to deliver payload to Japan in WWII, enough parts to make one complete LAIM, $2500 for all three and parts; John Nye nnn-nnn-nnnn (Delta UT)
Case SC, five total, all narrow front, hand clutch, some with Eagle hitch, one has pretty decent green Case front end loader that is in nice condition, not much welding, bucket not quite as nice but intact, none are in running condition but could come up with two to three that would run from the assortment, all probably have stuck engines, running out of time to work on them, $1000 for all five; John Nye nnn-nnn-nnnn (Delta UT)
Case SO, 1950, good condition, $3350 obo; Ralph nnn-nnn-nnnn (Sacramento CA)
Case VAC, 1946, no 3pt, like new paint, new rear tires, narrow front with tires at 80%, used as yard tractor, $1800; Earl Ming nnn-nnn-nnnn (Sandy OR)
Case VAC, three that are mostly complete, one with Case loader that’s not pristine, some have Eagle hitches, includes two more VACs in pieces with one wide front end, $750 takes all; John Nye nnn-nnn-nnnn (Delta UT)
Case, 10-20, 1917; Buck nnn-nnn-nnnn (Ellensburg WA)
Caterpillar 10, 20, 30 some parts; Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar 28 for sale, runs and drives well, sheet metal is in good shape, undercarriage is decent, stored inside, pictures on request, $2200 obo; Rick nnn-nnn-nnnn (Truckee CA)
Caterpillar D2, orchard, SN 5J2476SP, runs good, barn stored, $2500; Lyell nnn-nnn-nnnn (Squaw Valley CA)
Caterpillar D4 tract roller seals; Jim Ronsse nnn-nnn-nnnn (Chicago Park CA)
Caterpillar D7 3T series, 1948, runs great, electric start pony that runs well, hydraulic assist steering and forward/reverse lever, undercarriage is good, grousers are a little low, small oil leak on one final drive and radiator has a few small leaks to be fixed, bare with no attachments or accessories, needs to go by spring as storage has been lost, $3500 obo; Mr. Kim Kestler nnn-nnn-nnnn (Reno NV)
Caterpillar D8 with dozer blade. Have other heavy equipment/tractors, just ask; Mike nnn-nnn-nnnn (Buckley WA)
Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac W engine parts and radiator; Buck Evans nnn-nnn-nnnn (Greenville IL)
Cletrac W25, 1920, with rubber pads; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Emerson AA tractor parts; Buck nnn-nnn-nnnn (Ellensburg WA)
Farmall 230, wide front, runs good, fast hitch, lift frames for cultivators on front, rear tires good, narrow front included, $1500; Dave nnn-nnn-nnnn (Scotia CA)
Farmall A to 450 sheet metal plus miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall A, 1940s, tires ok, needs some parts and engine is stuck but includes other engine of choice, good sheet metal and gas tank, $2500; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall C or Super C, mounted front cultivator, most of a Fast hitch, engine is stuck, very straight complete tractor, can’t find SN, $700; John Nye nnn-nnn-nnnn (Delta UT)
Farmall Cub engine parts; Don Roberts nnn-nnn-nnnn (Crooked River Ranch OR)
Farmall Cub swinging drawbar, $140. U shaped draw bar, $90; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
Farmall Cub with hydraulics, two new rear tubes to install, good rims both front and rear, engine has good compression, sheet metal and original paint, hasn’t been started recently but is a runner, $775, paid $1850 for this tractor 7 years ago, photos only with serious buyers by request and sent by phone; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
Farmall F series decals, commercial grade, die cut, vinyl decals for pre 1939 Farmalls and McCormick Deerings, correct size, colors and fonts for Regulars, F20/F30, F12/F14. Engine sets for W, I and O models of McCormick Deering. Individual decals or complete sets, call for prices; Bob Currie nnn-nnn-nnnn or xxxx@xxxx.xxx (Georgetown CA)
Farmall F14, 1939, single front wheel on rubber, runs good, we’ve been pull starting it, $3000; Aaron nnn-nnn-nnnn no text leave message (Isleton CA)
Farmall F20, new tires, motor stuck from sitting, minor weather checking on tires; Bill Elzey nnn-nnn-nnnn (Touchet WA)
Farmall Fast Hitch to 3pt adapter, $150; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall H parts: transmission, rear rend, front axle and rear wheels; Don Roberts nnn-nnn-nnnn (Crooked River Ranch OR)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall H, runs, new tires, about 1949; Bill Elzey nnn-nnn-nnnn (Touchet WA)
Farmall International Low Boy Cub, narrow, runs good, barn stored, $1100; Lyell nnn-nnn-nnnn (Squaw Valley CA)
Farmall M, rebuilt everything, all new parts, new rear tire, original paint, $2550; Mike nnn-nnn-nnnn (Buckley WA)
Farmall Super C, 1954, Fast Hitch with two bottom plow, International Windbreaker with windshield; Al nnn-nnn-nnnn (Hazelton ID)
Ferguson 35 engine, three cylinder Perkins, complete overhaul, never run; John Shelton nnn-nnn-nnnn (Shelton WA)
Ford 2N or 9N, needs new block and transmission, has front hydraulic pump, 80% rear and front tires, fenders and hood are fair, has starter and generator, restoration projects or many good parts, brand new rear tubes included, $300; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Ford 2N, 1944, original 6V, starts easy, tires fair, needs paint, $1200; Fred nnn-nnn-nnnn (Bandon OR)
Ford 2N, 8N, 9N parts: fenders, used, decent, $30 each. One with script and frame, $35;
Ford 4610, 55 hp, orchard model, diesel; Bob Qualey nnn-nnn-nnnn (Silverton OR)
Ford 871, diesel, Select-O-Speed transmission, for parts, no injector pump, $250; John Nye nnn-nnn-nnnn (Delta UT)
Ford 8N, 1947, runs, needs front tires, rear tires okay, needs brakes, includes flat belt pulley in good condition, bush hog mower, $500; Melody nnn-nnn-nnnn (Ione CA)
Ford 8N, 1950, runs well, good battery, tires ok, hydraulics work, has lights, rear view mirror, front grille guard, $3900; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Ford 8N, original tractor with Ford script on fenders, pretty rusty old dairy tractor, runs, has no compression on cylinder one, $600; Chris Carl nnn-nnn-nnnn (Stanwood WA)
Ford 9N, 1941, ready for parade or display, 6V, starts and runs great, new tires, $2150; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, 2N, 8N used parts, some new wiring harnesses; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, 3pt lift control lever quadrant, early quadrant, as it is thicker aluminum, photos available by text, $200 plus photo ad and shipping; Jon Rodgers nnn-nnn-nnnn or xxxx@xxxx.xxx (Sonora CA)
Ford 9N, Howard Rotovator and auxiliary hydraulics, 1940 Sherman over/under and Howard gear reduction, $3200; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, Sherman step up/down transmission, no radiator, rough, $200; John Nye nnn-nnn-nnnn (Delta UT)
Ford CL40 skid steer, older small skid steer, has good rubber, V4 Ford industrial engine, starts hard unless primed, but runs and drives out good, not perfect but very good for its age, has ROPS, there are very durable machine, $6000 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Ford Jubilee, new rear rim, $1650; Mike nnn-nnn-nnnn (Buckley WA)
Ford/Ferguson BNO 40 aircraft tug, mostly complete and was running when parked, includes all tug parts and additional engine block with transmission, additional chassis (engine, transmission, rear end), extra fuel tank and radiator (pent top thermosyphon), extra hood, $2500, can text photos; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Fordson gas tanks, no dents, one looks good, $75. One needs repair, $30;
Fordson steel wheels; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Fordson, 1920, on steel, $1500; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Fordson, 1923, on steel wheels, mostly complete, radiator and gas tank tested, engine dismantled, two distributors, good buzz coils and box, intake/exhaust manifold and carburetor, new steering wheel wood, front wheels sand blasted and painted, other parts blasted and painted, $250; Ray Bathrick nnn-nnn-nnnn (North Bend OR)
Howard gear reduction for Ford 9N, 2N, 8N, $500-$1000; Fred nnn-nnn-nnnn (Bandon OR)
International 135 engine with clutch, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International 3200 skid steer hydraulic lift cylinders (several), also drive pump and miscellaneous other parts, take all for $500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
International 966, hydro, good tires, doesn’t run, $500; Bill Elzey nnn-nnn-nnnn (Touchet WA)
International Cub white grille, has hydraulics, good rubber, nice sheet metal, runs excellent, comes with blade, plow, disc, mower, lights, very nice tractor package deal, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)
International M, runs; Bill Elzey nnn-nnn-nnnn (Touchet WA)
International Super A parts: rear weights, $160 for the pair. Super A swinging drawbar, $190, U shape, $130; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
International Super A, good sheet metal, all tires and rims good, carburetor and starter rebuilt, 3pt hitch, drawbar, rear wheel weights, raised in dry Eastern WA, ready for minor restore including finish up touchup painting, used recently to grade driveways, $2150; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
International Super A, good sheet metal, rims and tires, engine has good compression, been in original owner’s barn for 30 years, very easy restore or for active farming, factory plow and 3pt hitch, discount will be considered for any active FFA member, $2150; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx for photos (Olympia WA)
International T340 bulldozer, early 1960s, with six way hydraulic blade, gas engine, starts and runs very good, no smoke, has very good tracks and sprockets, steers good both ways, hydraulics work excellent but have minor leak and a little slop, overall very nice machine for its age, runs and operates very good, $6500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
International TD9, with dozer blade, ran when parked, $1200; Bill Elzey nnn-nnn-nnnn (Touchet WA)
JD 310C tractor/loader/backhoe, engine work complete, crankshaft has been ground, cylinder head rebuilt, injector pump and starter rebuilt, needs engine kit and assembly, $1500; John Nye nnn-nnn-nnnn (Delta UT)
John Deere 1010, new generation collector tractor, like new with dealer rebuilt engine and clutch, new tires and powder coated wheels, new paint, seat and gauges, $6000 obo; George nnn-nnn-nnnn (Albany OR)
John Deere 40, all new parts, rear wheels painted plus grille, $3000; Mike nnn-nnn-nnnn (Buckley WA)
John Deere 40U, still in work clothes, needs TLC, runs good, hasn’t been used in a while, $2750; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere 420 crawler with nice hydraulic blade, four roller, motor runs but needs carburetor work or replaced, has good oil pressure, steers excellent both ways, has real nice undercarriage, clean little crawler, nice sheet metal, not perfect, but nice, can ship, $4500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 crawler, long track, Holt hydraulic tilt blade, good track chain but pads are worn, sprockets worn but usable, motor is stuck, crawler is complete with canopy good sheet metal, selling as is for parts or restore, can ship, $2200 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420, crawler with straight blade, runs and drives but has low oil pressure, hydraulic pump cracked, left steering clutch is stuck and tracks are stiff, missing left fender, cylinder bracket and seat mounts, rails, pins and bushings and finals are good, $1400; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere 420W, starts easily, runs and drives well, very good mechanical condition, sheet metal, transmission, wheels and tires all very good, hydraulics, 3pt, and PTO work as they should, engine overhauled about ten years ago and tractor has about 150 hours on it since, big bonus of factory power steering making it easy to drive, $3400, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 440I rear belly pan, $100; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere 440I, gas, wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt and side shift) work, decent tires and sheet metal is good, have original Blackwelder manuals as well as copies of the 440 manuals, $4200, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 70, diesel, starting engine, big engine loose, tricycle front end mostly complete, owned by Farmer Blue not Farmer Fowler, $2000; John Nye nnn-nnn-nnnn (Delta UT)
John Deere 720 nose piece, like new condition, paint not the best but no dents or bends, $250; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere A, 1951, runs great, good sheet metal and tires, lights and generator work, distributor ignition, $1200; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A, B, G, 60, 720 parts: Blocks, heads, carburetors, magnetos, sheet metal; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26 inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30 inch wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A, five total, all not running in various stages of disrepair, one has very nice JD 7-1/2 foot mounted cable lift snowplow, tractor has long axles, also includes mounted Wagner model WM1-JDAB front end loader, not much welding, bucket needs some work, loader is currently mounted also on a non-running A, $1200 takes all; John Nye nnn-nnn-nnnn (Delta UT)
John Deere BO fenders, new, not painted but not rusty, $500; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere BO, 1936, early production, certified Oregon sold tractor by John Deere, older paint, recently replaced radiator bottom section, straight Lefever fenders, stored inside the past 10 years, tires fair, great collector tractor, easy to load and haul, nice overall condition, $3250; Terry Christner nnn-nnn-nnnn (Molalla OR)
John Deere BR on steel, runs, lowered price, $4200; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
John Deere BR with BO turning brakes, starts easily, runs and drives well, electric start, good tires, $2900, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
John Deere BWH, one 1945 and one 1946 on spoke rear wheels, rough but the real thing with confirmed serial number search documents, only 280 of this model ever made, $1800 each or $3400 for both, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere collection: JD 50, nice straight tractor, 36-inch rear tires, $1750. JD L, hand start, no tag, runs and drives, $1500. JD AN, 1940, new 36-inch rear tires with round spoked wheels, single front, runs, $1500. JD D, 1937, $2000. JD AW, 1945, ant eater front, $900. JD AN, 1952, 42-inch rears, single front, $800. JD B, 1935, $1500. JD H, 1942, $1750; Chris Carl nnn-nnn-nnnn (Stanwood WA)
John Deere D, 1928, rebuilt engine, new hood and fenders, front end has been rebuilt, tractor is on steel and has been painted, stored inside, pictures on request, $2800 obo; Rick nnn-nnn-nnnn (Truckee CA)
John Deere DI, 1949, electric start, good tires, runs good, starts gas and runs on distillate, weighs 5250 lbs., $3000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $2600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, styled, single front wheel, no rear rims, clutch or carburetor, another partial G goes with it in pieces, $400; John Nye nnn-nnn-nnnn (Delta UT)
John Deere GP, 1929, excellent runner, decent tires, call for info, $5250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere H, 1945, electric start, starts easily, runs and drives well, hood and grille are very nice, wheels are all very good, carburetor, starter and magneto all rebuilt, new oil and filters, both engine and transmission, $2200, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere H, new rear bar tires, good front tires, row crop, excellent sheet metal, SN 33679, $2100; Chuck nnn-nnn-nnnn (John Day OR)
John Deere L, 1940, excellent condition, more pictures on request, recent restoration, Hercules motor, crank start very easy, runs and drives nice, tires in great condition, been used for parades and shows, have original SN tag and service manuals, $4000; Darrell Taylor nnn-nnn-nnnn or xxxx@xxxx.xxx (Strathmore CA)
John Deere LI, 1941, industrial tractor, rare and very low serial number (25th LI built), has foot throttle and other LI features, has good sheet metal and wheels, fair rear tires, stuck engine, good project tractor, $2500, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere Lindeman crawler, new tracks, new valve grind, no welds or cracks, very nice original crawler, no blade, $7500; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere M or 40 transmission cluster gears, $75; Dave Pearsall nnn-nnn-nnnn or xxxx@xxxx.xxx (Olympia WA)
John Deere M, 1951, very good condition, complete, starts easy, runs and drives well, very good sheet metal, unmodified front end, working hydraulics, $2400, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere M, mostly complete, engine stuck, also includes carcass M for parts, $300; John Nye nnn-nnn-nnnn (Delta UT)
John Deere M, with sickle, includes 12A combine, front blade, front hay forks and side delivery rake, runs good, barn stored, all for $2000; Lyell nnn-nnn-nnnn (Squaw Valley CA)
John Deere MC, 1950, crawler, very nice machine, too much to list, call for pics and info, $8000; Travis Hockel nnn-nnn-nnnn (Sprague River OR)
John Deere parts for B, D and M; Dave nnn-nnn-nnnn (Boring OR)
John Deere Spoker D, 1925; Buck nnn-nnn-nnnn (Ellensburg WA)
John Deere Unstyled G, run good when parked, $2500; Dave nnn-nnn-nnnn (Aurora OR)
John Deere unstyled gas tanks, can send photos; Jim Barratt nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
Massey Ferguson 135 diesel, industrial tractor with loader, good tires, starts and runs good, rear PTO, 3pt, rear weight box, $6000; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Massey Harris 101, 1949, row crop, 3pt, tires ok, will run, $400; Fred nnn-nnn-nnnn (Bandon OR)
Massey Harris 30, 1949, narrow front with older loader, no 3pt, 12.4-38 rear tires at 60%, like new fronts 6.50-16, nice shape, runs well, $1500; Earl Ming nnn-nnn-nnnn (Sandy OR)
Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Massey Harris 50, 1952, high clearance, will run, tires ok, $1000; Fred nnn-nnn-nnnn (Bandon OR)
Massey Harris 555 LP, 1956, very rare tractor, nice barn clothes, Continental engine, 66 hp on the belt, 57 hp on drawbar, ran when stored, clean the points and you’re ready to go, tires good shape, $1850; Terry Christner nnn-nnn-nnnn (Molalla OR)
McCormick Deering 1020 gas tank, looks good, $75;