Adams grader, $2500; Rick Parker nnn-nnn-nnnn (Lind WA)
AGCO LT90, four-wheel drive, front loader, $1000. AGCO 6690, a lot of parts, $1000; Laurence Hindley nnn-nnn-nnnn or xxxx@xxxx.xxx (Ferndale CA)
Allis Chalmers D-17, 1957, gas, snap coupler 3pt, 18.4-28 rear tires 70%, 6.00-16 fronts 90%, good paint, runs well, retiring from farming, $3500; Earl Ming nnn-nnn-nnnn (Sandy OR)
Allis Chalmers WD and WD45, both complete, at least one runs, $600 obo for both; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Allis Chalmers WD, parts, rebuilt head, $300; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
Allis Chalmers WD, restored, look good, call for price; Clayton Massey nnn-nnn-nnnn (Ephrata WA)
Allis Chalmers WD, runs, wide front, power steering, tires ok, $750; Fred nnn-nnn-nnnn (Bandon OR)
Case 300, 1956, round nose, 148 cubic inch gas engine, 12 speed triple range transmission, nice original transmission with good rubber, $2250 obo; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)
Case 930, 1969, eight speed, new front tires, 90% rears, in good shape, $4500; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)
Case C, good rubber, believed to be a runner, $600 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of other parts. Case C, S, or R&H HC245 rear round spoke wheels, 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case D, good runner, excellent rubber, $1200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case DC-4 with heart shaped front end, hand clutch, live PTO, hydraulic and Eagle hitch, runs, needs some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case DV or hard tractor, 1948, real good 14.9x26 rear tires, front tires still good, rear weights, PTO, new wiring, battery and gauges, starts and runs good, original straight tin work, no rust, $1450; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case L, 1937, runs good, we’ve been pull starting, reduced to $2500; Aaron nnn-nnn-nnnn no text leave message (Isleton CA)
Case S, nice runner, good rubber, $1200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case S, SC, D and DC tractors, various stages of disassembly, most are complete and have good sheet metal, call with needs for price; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case tractors: 310 cats, three available. three VACs. SC; CW Wallace nnn-nnn-nnnn (Toledo WA)
Case VAC, 1946, no 3pt, like new paint, new rear tires, narrow front with tires at 80%, used as yard tractor, $1800; Earl Ming nnn-nnn-nnnn (Sandy OR)
Cat 10 Ensign, carburetor, $350; Larry nnn-nnn-nnnn (Dexter OR)
Caterpillar 10, 20, 30 some parts; Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar D4; CW Wallace nnn-nnn-nnnn (Toledo WA)
Caterpillar grader, needs rear tires, $1200 obo; Rick Parker nnn-nnn-nnnn (Lind WA)
Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac W engine parts and radiator; Buck Evans nnn-nnn-nnnn (Greenville IL)
Cockshutt 30, 1948, wide front, underdrive, $750; Matt Little nnn-nnn-nnnn (Hayden ID)
Cockshutt; CW Wallace nnn-nnn-nnnn (Toledo WA)
Earthmaster tractors: one model C runs, one model C with shop built front end, loader and hydraulics, one model CH, high crop, several new tires, all three for $1500 firm; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)
Farmall 450D, not running, needs tires, $750 obo. 450D parts tractor with single front; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Farmall A to 450 sheet metal plus miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall A, 1940s, tires ok, needs some parts and engine is stuck but includes other engine of choice, good sheet metal and gas tank, $500; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall C, 1948, add on 3pt, old Z tread rears 11-36 at 60%, single front 6.00-16 at 90%, number one cultivating tractor for 15 years, very good shape, $2500; Earl Ming nnn-nnn-nnnn (Sandy OR)
Farmall F14, 1939, single front wheel on rubber, runs good, we’ve been pull starting it, reduced to $2500; Aaron nnn-nnn-nnnn no text leave message (Isleton CA)
Farmall Fast Hitch to 3pt adapter, $150; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall high crop, rare, runs good, starts good, good tires, $24500 or make offer, need to sell; Bob nnn-nnn-nnnn or nnn-nnn-nnnn (Fresno CA)
Farmall M, 1946, SN FBK 112552 xi, stored several years ago, engine free, no damage to sheet metal, email photos on request, $1900; Lorry Dunning nnn-nnn-nnnn (Davis CA)
Farmall M, project, need radiator replaced but is included, has down flow exhaust, runs strong, also have some extra sheet metal and pieces included, FOB; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Farmall MDCH, engine not stuck, has been turned to a row crop with wide front and 3pt hitch needs work, $1000 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Farmall Super C, 1954, Fast Hitch with two bottom plow, International Windbreaker with windshield; Al nnn-nnn-nnnn (Hazelton ID)
Ferguson 35 engine, three-cylinder Perkins, complete overhaul, never run; John Shelton nnn-nnn-nnnn (Shelton WA)
Ford 2N or 9N, needs new block and transmission, has front hydraulic pump, 80% rear and front tires, fenders and hood are fair, has starter and generator, restoration projects or many good parts, brand new rear tubes included, $300; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Ford 2N, two available, hi-low transmission, new rear tires, fronts new but old, $1800 each; Earl Ming nnn-nnn-nnnn (Sandy OR)
Ford 420 loader backhoe, or with Gannon scraper, backhoe needs cylinder repair, can supply parts or parts source, diesel engine runs strong, good shuttle transmission, need to sell with or without hoe; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Ford 8N, 1947, runs, needs front tires, rear tires okay, needs brakes, includes flat belt pulley in good condition, bush hog mower, $500; Melody nnn-nnn-nnnn (Ione CA)
Ford 8N, 1950, runs well, good battery, tires ok, hydraulics work, has lights, rear view mirror, front grille guard, $3900; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Ford 8N, rebuilt engine and hydraulics, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 9N, 3pt lift control quadrant, early version since it is aluminum, $200; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ford CL40 skid steer, older small skid steer, has good rubber, V4 Ford industrial engine, starts hard unless primed, but runs and drives out good, not perfect but very good for its age, has ROPS, there are very durable machine, $6000 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Ford NAA, 1953, rebuilt hydraulics, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Graham Bradley, restored, includes restored mower, live hydraulic pump, as is two bottom plow and spare parts tractor, $9000; (Red Bluff CA)
International 135 engine with clutch, $400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International 3200 skid steer hydraulic lift cylinders (several), also drive pump and miscellaneous other parts, take all for $500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
International crawlers: TD6 parts, stuck, $250. TD6-61 parts, stuck, $300. TD9 parts, loose, $300. TD9 runs, high seat, $650. TD9 runs, eight-foot dozer, $1250. TD35, 1930s, parts, $750. TD14A, parts, loose, $650. TD141, parts, loose, $800. TD141, yellow, runs, $1800. TD18A, parts, loose, $1200; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
International Cub white grille, has hydraulics, good rubber, nice sheet metal, runs excellent, comes with blade, plow, disc, mower, lights, very nice tractor package deal, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)
International Hydro 70, 1975, high crop, gas, 13.6-38 rear tires at 70%, good fronts, really good cultivating tractor, retired from nursery farming, $6500; Earl Ming nnn-nnn-nnnn (Sandy OR)
International T340 bulldozer, early 1960s, with six way hydraulic blade, gas engine, starts and runs very good, no smoke, has very good tracks and sprockets, steers good both ways, hydraulics work excellent but have minor leak and a little slop, overall very nice machine for its age, runs and operates very good, $6500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
International TD6 parts, equalizer spring with saddle hood grille, two battery box supports, radiator, left side final drive parts, all for $250 or will separately; Larry nnn-nnn-nnnn (Dexter OR)
John Deere 1010, new generation collector tractor, like new with dealer rebuilt engine and clutch, new tires and powder coated wheels, new paint, seat and gauges, $6000 obo; George nnn-nnn-nnnn (Albany OR)
John Deere 1010RS, diesel, rebuilt fuel pump, injectors were checked at fuel shop, new alternator, replaced bad glow plugs, nice rear tires, new seat, new fan belt, new battery and cables, tractor runs well, has a few small hydraulic leaks but don’t affect operation, head lights and rear implement lights work well, original paint, pictures on request, $5200; Brian nnn-nnn-nnnn or xxxx@xxxx.xxx (Spanaway WA)
John Deere 2040, $800. Loader for 2040, $1000; Laurence Hindley nnn-nnn-nnnn or xxxx@xxxx.xxx (Ferndale CA)
John Deere 4010, spun bearing on number 6 rod, $1800; Rick Parker nnn-nnn-nnnn (Lind WA)
John Deere 40U, still in work clothes, needs TLC, runs good, hasn’t been used in a while, $2750; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere 420 crawler with nice hydraulic blade, four roller, motor runs but needs carburetor work or replaced, has good oil pressure, steers excellent both ways, has real nice undercarriage, clean little crawler, nice sheet metal, not perfect, but nice, can ship, $4500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 crawler, long track, Holt hydraulic tilt blade, good track chain but pads are worn, sprockets worn but usable, motor is stuck, crawler is complete with canopy good sheet metal, selling as is for parts or restore, can ship, $2200 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 hood and grille, rusty, some dents, photos available, $250; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere 440I rear belly pan, $100; Joe Keith nnn-nnn-nnnn (Hermiston OR)
John Deere 440I, gas, wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt and side shift) work, decent tires and sheet metal is good, have original Blackwelder manuals as well as copies of the 440 manuals, $4200, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 4440, $1500; Laurence Hindley nnn-nnn-nnnn or xxxx@xxxx.xxx (Ferndale CA)
John Deere 720 nose piece, like new condition, paint not the best but no dents or bends, $250; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere A, 1934, restored, look good, call for price; Clayton Massey nnn-nnn-nnnn (Ephrata WA)
John Deere A, 1948, parts, split pedestal, single front wheel; Matt Little nnn-nnn-nnnn (Hayden ID)
John Deere A, 1951, runs great, good sheet metal and tires, lights and generator work, distributor ignition, $1200; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere B, 1949, 3pt, single front, 12.4-38 rear, old paint, from Idaho, runs well, $1900; Earl Ming nnn-nnn-nnnn (Sandy OR)
John Deere B, 1949, Roll-O-Matic front end, nice tractor in good shape, $3500, delivery to CA, AZ or NV for a reasonable charge; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)
John Deere BO fenders, new, not painted but not rusty, $500; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere BR with BO turning brakes, starts easily, runs and drives well, electric start, good tires, $2900, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
John Deere BWH, 1946, on spoke rear wheels, rough but the real thing with confirmed SN research, only 280 of this model made, $1800, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
John Deere D, 1948, parts, $2500; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $2600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, 1947, rare pan seat model, all fuel converted to gas only with new manifold, overhauled four years ago, recent paint and decals, good tires, new wiring and lights, runs strong, $4500, delivery to CA, AZ or NV for a reasonable charge; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)
John Deere GP, 1929, excellent runner, decent tires, call for info, $5250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere H, 1945, electric start, starts easily, runs and drives well, hood and grille are very nice, wheels are all very good, carburetor, starter and magneto all rebuilt, new oil and filters, both engine and transmission, $2200, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere LA 24-inch rear wheels, excellent used condition, $300 for the pair; Larry Schwarz nnn-nnn-nnnn (Centralia WA)
John Deere LA, 1945, SN 11102, needs starter work, new rubber, paint and decals, photos available, $3950; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere Lindeman crawler, new tracks, new valve grind, no welds or cracks, very nice original crawler, no blade, $7500; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere M, 1951, very good original condition, complete, starts easily, runs and drives very well, very good sheet metal, unmodified front end, working hydraulics, $2400, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
John Deere MC, 1950, crawler, very nice machine, too much to list, call for pics and info, $8000; Travis Hockel nnn-nnn-nnnn (Sprague River OR)
John Deere parts for B, D and M; Dave nnn-nnn-nnnn (Boring OR)
John Deere tractors: 1929 D, needs restoration. 1937? AR, needs restoration. As & Bs, need restoration. Hs, need restoration; CW Wallace nnn-nnn-nnnn (Toledo WA)
John Deere unstyled gas tanks, can send photos; Jim Barratt nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
Massey Ferguson 135 diesel, industrial tractor with loader, good tires, starts and runs good, rear PTO, 3pt, rear weight box, $6000; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Massey Ferguson 50, three-cylinder diesel, runs, $2850; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
Massey Ferguson MF202, 1963, industrial, gas powered, new rear tires, Gannon box on the back but no loader, $2500, delivery available at reasonable rates; Dan Christensen nnn-nnn-nnnn no texts (Borrego Springs CA)
Massey Ferguson TEA 20, parts, $300; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
Massey Ferguson TO30, runs, new seat, $2150; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
Massey Harris 101 Senior, 1940, restored, look good, call for price; Clayton Massey nnn-nnn-nnnn (Ephrata WA)
Massey Harris 22, 1951, narrow front, 3pt, 12.4-36 rear tires at 80%, fronts 60%, nice paint, runs well, number two cultivating tractor, retiring from nursery, $2500; Earl Ming nnn-nnn-nnnn (Sandy OR)
Massey Harris 30, 1949, narrow front with older loader, no 3pt, 12.4-38 rear tires at 60%, like new fronts 6.50-16, nice shape, runs well, $1500; Earl Ming nnn-nnn-nnnn (Sandy OR)
Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Massey Harris Pony, dismantling for parts; Irene nnn-nnn-nnnn (Dundee OR)
McCormick Deere O-14, 1939, needs minor assembly, all parts, complete tractor, overhauled engine, has been running, standard fenders, stored indoors last 20 years, $1800; Chuck Kaufman nnn-nnn-nnnn (Hood River OR)
McCormick Deering I-4, turns over, good shape, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O4, parting out, orchard belt pulley, shutters, plus miscellaneous; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering TD6s, non-runners, have two, one with blade, lots of extra parts; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
McCormick Deering tractors: F14 row crop. F12 field tractor. 10-20, Kay wheels; CW Wallace nnn-nnn-nnnn (Toledo WA)
McCormick Deering WK-40, full steel, original engine free, $3000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, four remotes, Amplitorque, good sheet metal, duals, rear main seal leak, can send pictures, $4450 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline GVI, 1960, diesel, 68 hp, 540 PTO, 23.1-26 rears, 7.50-18 fronts, cab with all glass, good sheet metal, two remotes, with nine foot Cancade hydraulic, two way, front blade, will sell with or without blade, blade available separately, can send pictures, $4450 with blade obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline U, 1949, restored, look good, call for price; Clayton Massey nnn-nnn-nnnn (Ephrata WA)
Minneapolis Moline UTU, 1946, restorable or for parts, never had it running, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UTU, 1951, needs engine work, $350; Matt Little nnn-nnn-nnnn (Hayden ID)
Minneapolis Moline Z parts tractor, can send pictures, $250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Moline UTS, 1949, runs, $1500; Matt Little nnn-nnn-nnnn (Hayden ID)
Oliver 1755 high crop, diesel, runs good, 3pt and PTO, please call, don’t text, $10000; Aaron nnn-nnn-nnnn (Walnut Grove CA)
Oliver 70 parts, set of 3-1/4-inch piston rings and rod bushings, $85. Lots of Oliver 70 parts. Two 70 parts tractors, one with five gear engine, $250 each, engines stuck; Larry nnn-nnn-nnnn (Dexter OR)
Oliver 70 parts: flat band front wheels, row crop wide front knees, belt pulley manifold and miscellaneous part; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 77 diesel intake and exhaust manifold. Exhaust manifold for Oliver 88 with Oliver cast into it, bolt on condition, can supply gasket on request; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Oliver OC3 engine parts; Matt Little nnn-nnn-nnnn (Hayden ID)
Oliver OC4, rare 60 gauge tractor, gas engine, been sitting for years but motor turns over, has good sheet metal, PTO, has home made blade but well built and looks good, easily removable, selling as is, can ship, $2400 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Parting out Massey 65 gas and Minnie M5 diesel; Buck Evans nnn-nnn-nnnn (Greenville IL)
Parts: Farmall H OEM carburetor and extra parts. Fairbanks Morse J four-cylinder magneto. Farmall H starter fuel tank with small dent. Farmall H fuel tank, no rust, used camera to look inside and in good shape. Carburetor right side throttle control for Farmall 300, 400 or M. Miscellaneous starters, generators, some bolt on, some cores, price includes shipping; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Pettibone Mulliken grader, all hydraulic, large machine, $3500; Rick Parker nnn-nnn-nnnn (Lind WA)