Adams grader, $2500; Rick Parker nnn-nnn-nnnn (Lind WA)
AGCO LT90, four-wheel drive, front loader, $1000. AGCO 6690, a lot of parts, $1000; Laurence Hindley nnn-nnn-nnnn or xxxx@xxxx.xxx (Ferndale CA)
Allis Chalmers B industrial, 1952, SN IB 2347, good rubber, good sheet metal, new magneto; Mike Stafford nnn-nnn-nnnn (Petaluma CA)
Allis Chalmers D-17, 1957, gas, snap coupler 3pt, 18.4-28 rear tires 70%, 6.00-16 fronts 90%, good paint, runs well, retiring from farming, $3500; Earl Ming nnn-nnn-nnnn (Sandy OR)
Allis Chalmers G, $3500; Lew Ward (corrected) nnn-nnn-nnnn (Brush Prairie WA)
Allis Chalmers WD and WD45, both complete, at least one runs, $600 obo for both; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Allis Chalmers WD, parts, rebuilt head, $300; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
Allis Chalmers WD, restored, look good, call for price; Clayton Massey nnn-nnn-nnnn (Ephrata WA)
Allis Chalmers WD, runs, wide front, power steering, tires ok, $750; Fred nnn-nnn-nnnn (Bandon OR)
Case 300, 1956, round nose, 148 cubic inch gas engine, 12 speed triple range transmission, nice original condition with good rubber, $2250 obo; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)
Case 600 Wheatland, 6 cylinder diesel engine free, nice shape, low production, $2500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case 930, 1969, eight speed, new front tires, 90% rears, in good shape, $4500; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)
Case C, good rubber, believed to be a runner, $600 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of other parts. Case C, S, or R&H HC245 rear round spoke wheels, 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case D, good runner, excellent rubber, $1200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case DC-4 with heart shaped front end, hand clutch, live PTO, hydraulic and Eagle hitch, runs, needs some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case L, 1937, on steel, runs good, $2000; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Case later model 900 inline injector pump, good work horse, $3000; Donald Kravik nnn-nnn-nnnn (Whitehall MT)
Case S, nice runner, good rubber, $1200 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case S, SC, D and DC tractors, various stages of disassembly, most are complete and have good sheet metal, call with needs for price; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Case tractors: 310 cats, three available. three VACs. SC; CW Wallace nnn-nnn-nnnn (Toledo WA)
Cat 10 Ensign, carburetor, $350; Larry nnn-nnn-nnnn (Dexter OR)
Caterpillar 20, SN L279, condition fair, make offer; Larry Johnson nnn-nnn-nnnn or xxxx@xxxx.xxx (Kremlin MT)
Caterpillar D2 orchard, SN 5J2476SP, runs good, barn stored, $2500, now $2300; Lyell nnn-nnn-nnnn (Squaw Valley CA)
Caterpillar D4; CW Wallace nnn-nnn-nnnn (Toledo WA)
Caterpillar D8H36A, straight cable blade with hydraulic tilt and two shank rippers, runs good with good undercarriage, good for small ripping jobs, located CA central coast, Templeton, $14500; Paul Valentine nnn-nnn-nnnn (Montesano WA)
Caterpillar grader, needs rear tires, $1200 obo; Rick Parker nnn-nnn-nnnn (Lind WA)
Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cockshutt 30, 1948, wide front, underdrive, $750; Matt Little nnn-nnn-nnnn (Hayden ID)
Cockshutt; CW Wallace nnn-nnn-nnnn (Toledo WA)
Earthmaster tractors: one model C runs, one model C with shop built front end, loader and hydraulics, one model CH, high crop, several new tires, all three for $1500 firm; Steve Stevens nnn-nnn-nnnn (Medical Lake WA)
Farmall 450D, not running, needs tires, $750 obo. 450D parts tractor with single front; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Farmall A to 450 sheet metal plus miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall A, 1940s, tires ok, needs some parts and engine is stuck but includes other engine of choice, good sheet metal and gas tank, $500; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Farmall A, new engine rebuilt, repainted, tractor good, tires good condition, $1800; Florian Nordhus nnn-nnn-nnnn (Connell WA)
Farmall C and Super C, both complete with hydraulics, starters, generators, carburetors, etc., both are likely stuck, $600 each, great for restoration, yard art, or parts, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
Farmall C, 1948, add on 3pt, old Z tread rears 11-36 at 60%, single front 6.00-16 at 90%, number one cultivating tractor for 15 years, very good shape, $2500; Earl Ming nnn-nnn-nnnn (Sandy OR)
Farmall Cub, 1949, with blade, completely gone over, show condition, $2200; Florian Nordhus nnn-nnn-nnnn (Connell WA)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall H, parts tractor, all there except engine and radiator; Donald Engstrom nnn-nnn-nnnn (Terrebonne OR)
Farmall high crop, rare, runs good, starts good, good tires, $24500 or make offer, need to sell; Bob nnn-nnn-nnnn or nnn-nnn-nnnn (Fresno CA)
Farmall M, 1946, SN FBK 112552 xi, stored several years ago, engine free, no damage to sheet metal, email photos on request, $1900; Lorry Dunning nnn-nnn-nnnn (Davis CA)
Farmall M, project, need radiator replaced but is included, has down flow exhaust, runs strong, also have some extra sheet metal and pieces included, FOB; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Farmall MDCH, engine not stuck, has been turned to a row crop with wide front and 3pt hitch needs work, $1000 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Ford 2N, two available, hi-low transmission, new rear tires, fronts new but old, $1800 each; Earl Ming nnn-nnn-nnnn (Sandy OR)
Ford 420 loader backhoe, or with Gannon scraper, backhoe needs cylinder repair, can supply parts or parts source, diesel engine runs strong, good shuttle transmission, need to sell with or without hoe; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Ford 8N generator, needs rebuilding, took off for 12V conversion, $5 plus shipping; Pat Sorensen nnn-nnn-nnnn (San Ramon CA)
Ford 8N, rebuilt engine and hydraulics, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Ford 9N with Howard Rotovator, auxiliary hydraulics, 1940 Sherman over/under and Howard gear reduction, $3200; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, 1941, ready for parade or display, 6V, starts and runs great, new tires, $2200, delivery available for a fee; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, 3pt lift control quadrant, early version since it is aluminum, $200; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ford 9N, factory loader, high/low transmission, good tires and runs good, $1950; Donald Engstrom nnn-nnn-nnnn (Terrebonne OR)
Ford CL40 skidsteer, older and smaller, good rubber, V4 Ford industrial engine, starts hard unless primed but runs and drives out good, very good condition for its age, has ROPS, great durable machine, $6000; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Ford Major backhoe loader, late 40s or early 50s, made in England, runs good, $2500; Carol Gay nnn-nnn-nnnn (Keno OR)
Ford NAA, 1953, rebuilt hydraulics, $3500; Robert McLaughlin nnn-nnn-nnnn (Benton City WA)
Graham Bradley, restored, includes restored mower, live hydraulic pump, as is two bottom plow and spare parts tractor, $9000; (Red Bluff CA)
International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International 3200 skidsteer hydraulic lift cylinders, several drive pump and miscellaneous other parts, all for $450; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
International crawlers: TD6 parts, stuck, $250. TD6-61 parts, stuck, $300. TD9 parts, loose, $300. TD9 runs, high seat, $650. TD9 runs, eight-foot dozer, $1250. TD35, 1930s, parts, $750. TD14A, parts, loose, $650. TD141, parts, loose, $800. TD141, yellow, runs, $1800. TD18A, parts, loose, $1200; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
International Cub low boy 154, 1972, good condition, $1200; Florian Nordhus nnn-nnn-nnnn (Connell WA)
International Cub lowboy, 1966, five foot belly mount mower, professional yellow and white paint job on tractor, factory 12V electrical with electronic ignition, good rubber, ready to mow, original manuals for tractor and mower, $3750, pictures upon request; Lee nnn-nnn-nnnn (Crawfordsville OR)
International Cub white grille, has hydraulics, good rubber, nice sheet metal, runs excellent, comes with blade, plow, disc, mower, lights, very nice tractor package deal, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)
International Hydro 70, 1975, high crop, gas, 13.6-38 rear tires at 70%, good fronts, really good cultivating tractor, retired from nursery farming, $6500; Earl Ming nnn-nnn-nnnn (Sandy OR)
International TD6 parts, equalizer spring with saddle hood grille, two battery box supports, radiator, left side final drive parts, all for $250 or will separately; Larry nnn-nnn-nnnn (Dexter OR)
John Deere 1010RS, diesel, rebuilt fuel pump, injectors were checked at fuel shop, new alternator, replaced bad glow plugs, nice rear tires, new seat, new fan belt, new battery and cables, tractor runs well, has a few small hydraulic leaks but don’t affect operation, head lights and rear implement lights work well, original paint, pictures on request, $5200; Brian nnn-nnn-nnnn or xxxx@xxxx.xxx (Spanaway WA)
John Deere 2040, $800. Loader for 2040, $1000; Laurence Hindley nnn-nnn-nnnn or xxxx@xxxx.xxx (Ferndale CA)
John Deere 4010, spun bearing on number 6 rod, $1800; Rick Parker nnn-nnn-nnnn (Lind WA)
John Deere 420 crawler, long track, Holt hydraulic lift blade, good track chain but pads are worn, sprockets wore but usable, motor is stuck, crawler is complete with canopy, good sheet metal, selling as is or for parts or restore, can ship, $2200 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 high crop, complete, original and very nice, runs and starts fine, has serial tag, full belly mount and rear cultivator, tires are 80-90%, $6500; Augie nnn-nnn-nnnn (Merced CA)
John Deere 420 hood and grille, rusty, some dents, photos available, $250; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere 420 with nice Holt hydraulic blade, four roller, motor runs but needs carburetor work or replacement, good oil pressure, steers excellent both ways, real nice undercarriage, clean little crawler, nice sheet metal, PTO off back, $4500, can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 440I, gas, wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt and side shift) work, decent tires and sheet metal is good, have original Blackwelder manuals as well as copies of the 440 manuals, $4200, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 4440, $1500; Laurence Hindley nnn-nnn-nnnn or xxxx@xxxx.xxx (Ferndale CA)
John Deere 800 swather, 18 foot, works good, $800; Donald Kravik nnn-nnn-nnnn (Whitehall MT)
John Deere A, 1934, restored, look good, call for price; Clayton Massey nnn-nnn-nnnn (Ephrata WA)
John Deere A, 1948, parts, split pedestal, single front wheel; Matt Little nnn-nnn-nnnn (Hayden ID)
John Deere A, 1951, runs great, good sheet metal and tires, lights and generator work, distributor ignition, $1200; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A, engine turns over with bad cylinder head but repairable; Donald Engstrom nnn-nnn-nnnn (Terrebonne OR)
John Deere AN, 1948, single front wheel, good tires and tin all around, starts easily and runs great, charging system works, $2400, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
John Deere AW, 1949, runs good, electrical start, good tires, new radiator core, bored and fitted with high compression pistons, new seat, good sheet metal, power-trol lift and decent paint, $3500, additional pictures available; Gary Franklin nnn-nnn-nnnn or xxxx@xxxx.xxx (Mountain Ranch CA)
John Deere B, 1949, 3pt, single front, 12.4-38 rear, old paint, from Idaho, runs well, $1900; Earl Ming nnn-nnn-nnnn (Sandy OR)
John Deere B, 1949, Roll-O-Matic front end, nice tractor in good shape, $3500, delivery to CA, AZ or NV for a reasonable charge; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)
John Deere B, parts tractor, engine turns over, no sheet metal; Donald Engstrom nnn-nnn-nnnn (Terrebonne OR)
John Deere block, out of 1946, replaced the block since no one around me could bore it, Free; Pat Sorensen nnn-nnn-nnnn (San Ramon CA)
John Deere BWH, 1946, on spoke rear wheels, rough but the real thing with confirmed SN research, only 280 of this model made, $1800, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
John Deere D, 1948, parts, $2500; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $2600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, 1947, rare pan seat model, all fuel converted to gas only with new manifold, overhauled four years ago, recent paint and decals, good tires, new wiring and lights, runs strong, $4500, delivery to CA, AZ or NV for a reasonable charge; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)
John Deere GP, 1929, excellent runner, decent tires, call for info, $5250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere H, 1945, electric start, starts easily, runs and drives well, hood and grille are very nice, wheels are all very good, carburetor, starter and magneto all rebuilt, new oil and filters, both engine and transmission, $2200, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere LA 24-inch rear wheels, excellent used condition, $300 for the pair; Larry Schwarz nnn-nnn-nnnn (Centralia WA)
John Deere LA, 1945, SN 11102, needs starter work, new rubber, paint and decals, photos available, $3950; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere Lindeman crawler, new tracks, new valve grind, no welds or cracks, very nice original crawler, no blade, $7500; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere MC, starts and runs well, had complete overhaul in 05 (over $1000 in parts), only been used a few times each winter to clear the driveway, $4490 and will deliver nearby; Edward Hanks nnn-nnn-nnnn (Cashmere WA)
John Deere MC, very good undercarriage, real nice original tracks, good sheet metal, no blade, been sitting for years, motor is stuck, excellent parts machine for restoration of MC or Lindeman if you need tracks, $1800, sell all only, can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere tractors: 1929 D, needs restoration. 1937? AR, needs restoration. As & Bs, need restoration. Hs, need restoration; CW Wallace nnn-nnn-nnnn (Toledo WA)
John Deere unstyled gas tanks, can send photos; Jim Barratt nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
Massey 75 combine, 20 foot head and pickup head, runs good, $2500; Donald Kravik nnn-nnn-nnnn (Whitehall MT)
Massey Ferguson 50, three-cylinder diesel, runs, $2850; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
Massey Ferguson MF202, 1963, industrial, gas powered, new rear tires, Gannon box on the back but no loader, $2500, delivery available at reasonable rates; Dan Christensen nnn-nnn-nnnn no texts (Borrego Springs CA)
Massey Ferguson TEA 20, parts, $300; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
Massey Ferguson TO30, runs, new seat, $2150; James Gorter nnn-nnn-nnnn (San Luis Obispo CA)
Massey Harris 101 Senior, 1940, restored, look good, call for price; Clayton Massey nnn-nnn-nnnn (Ephrata WA)
Massey Harris 101, row crop, 1949, 3pt, tires ok, will run; Fred nnn-nnn-nnnn (Bandon OR)
Massey Harris 22, 1951, narrow front, 3pt, 12.4-36 rear tires at 80%, fronts 60%, nice paint, runs well, number two cultivating tractor, retiring from nursery, $2500; Earl Ming nnn-nnn-nnnn (Sandy OR)
Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Massey Harris 50 high clearance, 1952, will run, tires ok, $1000; Fred nnn-nnn-nnnn (Bandon OR)
Massey Harris 50, gas, with Superior loader, runs good, good tires and brakes, 540 PTO, 3pt, $2600, delivery available; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Massey Harris Pony, dismantling for parts; Irene nnn-nnn-nnnn (Dundee OR)
McCormick Deere O-14, 1939, needs minor assembly, all parts, complete tractor, overhauled engine, has been running, standard fenders, stored indoors last 20 years, $1800; Chuck Kaufman nnn-nnn-nnnn (Hood River OR)
McCormick Deering I-4, turns over, good shape, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O4, parting out, orchard belt pulley, shutters, plus miscellaneous; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering TD6s, non-runners, have two, one with blade, lots of extra parts; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
McCormick Deering tractors: F14 row crop. F12 field tractor. 10-20, Kay wheels; CW Wallace nnn-nnn-nnnn (Toledo WA)
McCormick Deering WK-40, full steel, original engine free, $3000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, four remotes, Amplitorque, good sheet metal, duals, rear main seal leak, can send pictures, $4450 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline GVI, 1960, diesel, 68 hp, 540 PTO, 23.1-26 rears, 7.50-18 fronts, cab with all glass, good sheet metal, two remotes, with nine foot Cancade hydraulic, two way, front blade, will sell with or without blade, blade available separately, can send pictures, $4450 with blade obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline U, 1949, restored, look good, call for price; Clayton Massey nnn-nnn-nnnn (Ephrata WA)
Minneapolis Moline UTU, 1946, restorable or for parts, never had it running, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UTU, 1951, needs engine work, $350; Matt Little nnn-nnn-nnnn (Hayden ID)
Minneapolis Moline Z parts tractor, can send pictures, $250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Moline UTS, 1949, runs, $1500; Matt Little nnn-nnn-nnnn (Hayden ID)
Oliver 70 parts, set of 3-1/4-inch piston rings and rod bushings, $85. Lots of Oliver 70 parts. Two 70 parts tractors, one with five gear engine, $250 each, engines stuck; Larry nnn-nnn-nnnn (Dexter OR)
Oliver 70 parts: flat band front wheels, row crop wide front knees, belt pulley manifold and miscellaneous part; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 77 diesel intake and exhaust manifold. Exhaust manifold for Oliver 88 with Oliver cast into it, bolt on condition, can supply gasket on request; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)