Allis Chalmers 6b, four cylinder AC motor, strong canopy, big drum with new cable, blade with good hydraulics, runs good, $7000 obo; Robert Doud nnn-nnn-nnnn (Chiloquin OR)
Allis Chalmers B industrial, 1952, SN IB 2347, good rubber, good sheet metal, new magneto; Mike Stafford nnn-nnn-nnnn (Petaluma CA)
Allis Chalmers G, $3500; Lew Ward (corrected) nnn-nnn-nnnn (Brush Prairie WA)
Allis Chalmers WD, runs, wide front, power steering, tires ok, $750; Fred nnn-nnn-nnnn (Bandon OR)
BF Avery model V, 1944, nicely restored, good running Hercules engine, great for parades or shows, $3500; Dan nnn-nnn-nnnn (Fairfield CA)
Bobcat 500 skid steers, three available, parts or restore, $2500; C Wallace nnn-nnn-nnnn (Toledo WA)
Case 310 crawlers, four available, three gas and one diesel; C Wallace nnn-nnn-nnnn (Toledo WA)
Case 600 Wheatland, 6 cylinder diesel engine free, nice shape, low production, $2500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, 1936, not running, complete, very straight tractor, $850; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of other parts. Case C, S, or R&H HC245 rear round spoke wheels, 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CC4, 1936, not running, complete, about 1200 of this model made, $850; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case CO, 1929, not running, complete, $500; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case DC-4 with heart shaped front end, hand clutch, live PTO, hydraulic and Eagle hitch, runs, needs some tinkering, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case later model 900 inline injector pump, good work horse, $3000; Donald Kravik nnn-nnn-nnnn (Whitehall MT)
Case M3B forklift, 1950s, very rare and in very nice shape, very few were ever made, has two stage mast, gas engine runs very nice on this machine, undercarriage very good, $9500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Case parts, VA, C, to many to list, call with needs; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case SC, 1947, SN 5104350, runs, sheet metal good, rebuilt generator and magneto, wide front, $500 obo; Dennis Thieren nnn-nnn-nnnn (Fairfield WA)
Case, 1947, restored, has always been garaged, $8000; Dan York nnn-nnn-nnnn (Stevensville MT)
Caterpillar 10, pile of parts, $700; Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar 20, SN L279, condition fair, make offer; Larry Johnson nnn-nnn-nnnn or xxxx@xxxx.xxx (Kremlin MT)
Caterpillar 30, fair tractor, good radiator, no manifolds; Gene Stuckle nnn-nnn-nnnn no texts (Davenport WA)
Caterpillar 955L, SN 71J3592, runs and functions good, undercarriage ok, gp bucket, bare back end, has some oil leaks, $4500; Dennis Gullick nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)
Caterpillar D2 orchard, SN 5J2476SP, runs good, barn stored, $2500, now $2300; Lyell nnn-nnn-nnnn (Squaw Valley CA)
Caterpillar D8H36A, straight cable blade with hydraulic tilt and two shank rippers, runs good with good undercarriage, good for small ripping jobs, located CA central coast, Templeton, $14500; Paul Valentine nnn-nnn-nnnn (Montesano WA)
Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Farmall A to 450 sheet metal plus miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall A, new engine rebuilt, repainted, tractor good, tires good condition, $1800; Florian Nordhus nnn-nnn-nnnn (Connell WA)
Farmall C and Super C, both complete with hydraulics, starters, generators, carburetors, etc., both are likely stuck, $600 each, great for restoration, yard art, or parts, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
Farmall Cub, 1949, with blade, completely gone over, show condition, $2200; Florian Nordhus nnn-nnn-nnnn (Connell WA)
Farmall H rear skeleton steel wheels with lugs in good shape, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall H, parts tractor, all there except engine and radiator; Donald Engstrom nnn-nnn-nnnn (Terrebonne OR)
Farmall tractor parts for M, H, C, B, A and Cub, what do you need?; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Ferguson, TE3411, one with aluminum transmission and casing, no starter, $1500; Ed Barbosa nnn-nnn-nnnn (Morgan Hill CA)
Ford 841, Elenco four wheel drive, power steering, manual reverser, runs great, very nice little tractor, can send pictures, $8500; Tim Bynum nnn-nnn-nnnn or xxxx@xxxx.xxx (Yreka CA)
Ford 8N generator, needs rebuilding, took off for 12V conversion, $5 plus shipping; Pat Sorensen nnn-nnn-nnnn (San Ramon CA)
Ford 8N, 1949, runs good, includes back blade, $1800; Gary Thieman nnn-nnn-nnnn (Buckley WA)
Ford 8N, 1950, runs well, good battery, tires ok, hydraulics work, has lights, rear view mirror, front grille guard, $3900; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Ford 9N with Howard Rotovator, auxiliary hydraulics, 1940 Sherman over/under and Howard gear reduction, $3200; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, 1939, metal good, runs good, Dearborn brush hog about 1957, $1500 for both; Dan nnn-nnn-nnnn (Fairfield CA)
Ford 9N, 1941, ready for parade or display, 6V, starts and runs great, new tires, $2200, delivery available for a fee; Fred nnn-nnn-nnnn (Bandon OR)
Ford 9N, 3pt lift quadrant, partially aluminum, early version, probably 1939, it is shown on page 36 of Originality Guide Ford N series tractors, nice piece with handle intact, $200; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ford 9N, factory loader, high/low transmission, good tires and runs good, $1950; Donald Engstrom nnn-nnn-nnnn (Terrebonne OR)
Ford 9N, project, tin is poor, tires are poor, engine is loose and pretty complete, $400, can help load; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ford CL40 skidsteer, older and smaller, good rubber, V4 Ford industrial engine, starts hard unless primed but runs and drives out good, very good condition for its age, has ROPS, great durable machine, $6000; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Ford Major backhoe loader, late 40s or early 50s, made in England, runs good, $2500; Carol Gay nnn-nnn-nnnn (Keno OR)
Fordson Major backhoe, older, running, $2500; Carol Gay nnn-nnn-nnnn (Keno OR)
International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International 3200 skidsteer hydraulic lift cylinders, several drive pump and miscellaneous other parts, all for $450; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
International Cub low boy 154, 1972, good condition, $1200; Florian Nordhus nnn-nnn-nnnn (Connell WA)
International Cub lowboy, 1966, five foot belly mount mower, professional yellow and white paint job on tractor, factory 12V electrical with electronic ignition, good rubber, ready to mow, original manuals for tractor and mower, reduced $2750 $3750, pictures upon request; Lee nnn-nnn-nnnn (Crawfordsville OR)
International Cub rear fenders, two available, $20; Dennis Thieren nnn-nnn-nnnn (Fairfield WA)
International Cub white grille, has hydraulics, good rubber, nice sheet metal, runs excellent, comes with blade, plow, disc, mower, lights, very nice tractor package deal, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere 420 crawler, 1957, heavy duty inside arm hydraulic blade, manual angle, rare 3pt hitch, no top link, starts and runs great, great oil pressure, steers good left, steers right but may need adjusting some, have to pull harder to the right, auxiliary reverser doesn’t work, main transmission works fine both forward and backward, recent new main clutch, undercarriage about 70%, five roller long track, couple leaks on hydraulic cylinders, has canopy, very good sheet metal, call for more info, very nice machine to restore or use, hard to find this model, $8900; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 crawler, 5 roller, Holt hydraulic tilt blade, good track chain but pads are worn but usable, sprockets wore but usable, motor is stuck, crawler is complete with canopy, good sheet metal, selling as is or for parts or restore, can ship, $2200 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 high crop, complete, original and very nice, runs and starts fine, has serial tag, full belly mount and rear cultivator, tires are 80-90%, $6500; Augie nnn-nnn-nnnn (Merced CA)
John Deere 420 with nice Holt hydraulic blade, four roller, motor runs but needs carburetor work or replacement, good oil pressure, steers excellent both ways, real nice undercarriage, clean little crawler, nice sheet metal, PTO off back, $4500, can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 440I, gas, wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt and side shift) work, decent tires and sheet metal is good, have original Blackwelder manuals as well as copies of the 440 manuals, $4200, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 800 swather, 18 foot, works good, $800; Donald Kravik nnn-nnn-nnnn (Whitehall MT)
John Deere 840 scraper, tractor only, electric start, engine free, parts tractor, lots of parts fit and 820 or 830; Chris nnn-nnn-nnnn (Turlock CA)
John Deere A, 1936, SN 418806, unrestored, not running, engine not stuck, $1200 obo; Dan Meyer nnn-nnn-nnnn leave message (Placerville CA)
John Deere A, 1951, runs great, good sheet metal and tires, lights and generator work, distributor ignition, $1200; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere A, engine turns over with bad cylinder head but repairable; Donald Engstrom nnn-nnn-nnnn (Terrebonne OR)
John Deere AN, 1948, single front wheel, good tires and tin all around, starts easily and runs great, charging system works, $2400, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
John Deere AW, 1949, runs good, electrical start, good tires, new radiator core, bored and fitted with high compression pistons, new seat, good sheet metal, power-trol lift and decent paint, reduced $2500 $3500, additional pictures available; Gary Franklin nnn-nnn-nnnn or xxxx@xxxx.xxx (Mountain Ranch CA)
John Deere B, 1935, SN 3124, runs good, nice paint, very good rubber, $4500; Dan Meyer nnn-nnn-nnnn leave message (Placerville CA)
John Deere B, parts tractor, engine turns over, no sheet metal; Donald Engstrom nnn-nnn-nnnn (Terrebonne OR)
John Deere block, out of 1946, replaced the block since no one around me could bore it, Free; Pat Sorensen nnn-nnn-nnnn (San Ramon CA)
John Deere D, 1948, restored in 2005; Dave nnn-nnn-nnnn (Grass Valley CA)
John Deere DI, 1949, electric start, good tires, runs good, starts gas and runs on distillate, weighs 5250 lbs., $3000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $2600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere GP, 1929, excellent runner, decent tires, call for info, $5250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere hood and grille for 420, some dents and rust, photos available, $250 obo; D. Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere LA, 1944, SN 9097, runs good, good tires, rear wheel weights, needs new restoration, generator not working, $2000 obo; Dan Meyer nnn-nnn-nnnn (Placerville CA)
John Deere LA, 1945, SN 11102, parade ready, new paint, decals and rubber, needs starter work, photos available, $3950; D. Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere Lindeman crawler, new tracks, new valve grind, no welds or cracks, very nice original crawler, no blade, $7500; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere M, $1800; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)
John Deere MC, starts and runs well, had complete overhaul in 05 (over $1000 in parts), only been used a few times each winter to clear the driveway, $4490 and will deliver nearby; Edward Hanks nnn-nnn-nnnn (Cashmere WA)
John Deere MC, very good undercarriage, real nice original tracks, pads almost perfect, good sheet metal, no blade, been sitting for years, motor is stuck, excellent parts machine for restoration of MC or Lindeman if you need tracks, $1800, sell all only, can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere round tube wide front, complete, fits A, B, or G with split pedestal, complete including hubs, steering arms, tie rods, mounting plates, all mounting bolts, nothing is either broken or repaired, everything in very good condition, ready to go to work on your tractor, $995; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
John Deere two cylinder crawler parts, distributors, starters, manifolds, etc., sell as a package deal; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere unstyled gas tanks, can send photos; Jim Barratt nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
John Deeres: Hs, three available. JD early D and AR; C Wallace nnn-nnn-nnnn (Toledo WA)
Massey 75 combine, 20 foot head and pickup head, runs good, $2500; Donald Kravik nnn-nnn-nnnn (Whitehall MT)
Massey Harris 101, row crop, 1949, 3pt, tires ok, will run; Fred nnn-nnn-nnnn (Bandon OR)
Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Massey Harris 44 tip toe wheels, $400; Gene Stuckle nnn-nnn-nnnn no texts (Davenport WA)
Massey Harris 50 high clearance, 1952, will run, tires ok, $1000; Fred nnn-nnn-nnnn (Bandon OR)
McCormick Deering I-4, turns over, good shape, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O4, parting out, orchard belt pulley, shutters, plus miscellaneous; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering OS4, 1948, standard, restored in 2006; Dave nnn-nnn-nnnn (Grass Valley CA)
McCormick Deering WK-40, full steel, original engine free, $3000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Minneapolis Moline collection, seven total: 1948 Z, 1960 R, 1955 445, 1948 U, 1956 5 Star, 1957 U, 1959 restored propane ZB; Gary Clark nnn-nnn-nnnn (North Plains OR)
Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, four remotes, Amplitorque, good sheet metal, duals, rear main seal leak, can send pictures, $4450 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline GVI, 1960, diesel, 68 hp, 540 PTO, 23.1-26 rears, 7.50-18 fronts, cab with all glass, good sheet metal, two remotes, with nine foot Cancade hydraulic, two way, front blade, will sell with or without blade, blade available separately, can send pictures, $4450 with blade obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UTU, 1946, restorable or for parts, never had it running, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline Z parts tractor, can send pictures, $250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
New Holland Harobed 1045 WNS, running when parked, good condition, $4000; John Robie nnn-nnn-nnnn (Milton CA)
Oliver 1550 PTO, complete unit; Jerry Van De Walle nnn-nnn-nnnn or nnn-nnn-nnnn (Yamhill OR)
Oliver 70 parts: flat band front wheels, row crop wide front knees, belt pulley manifold and miscellaneous part; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 77 gas tank, good condition, other miscellaneous parts; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Oliver Cletrac crawler with blade, General Motors 2.8 engine, runs good, undercarriage good, $2100; Donald Engstrom nnn-nnn-nnnn (Terrebonne OR)
Oliver OC3, Cletrac HG, manifolds, carburetors, water pumps, fenders, magnetos, starters, etc., would like to sell as package deal; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Parting out: Allis Monarch 35. Caterpillar 20 and 30. Massey Ferguson 65 gas; Buck Evans nnn-nnn-nnnn (Greenville IL)
Rim, 11/38 drop center for Farmall, John Deere and other row crop, came off styled 88; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Tires: BF Goodrich Silvertons, 7x38 (7.5x24), 10 ply, tubes and flaps, new, $1200 for the pair. 7.50x24 front grader tires, 10 ply, Pennsylvania brand, good live rubber, $1000 obo; Tom Godish nnn-nnn-nnnn (Portland OR)
Tires: two 23.1x26 BFG, new old stock, never mounted, 45 degree bar, stored inside, $2800; Chris nnn-nnn-nnnn (Fresno CA)
Wagner, with four Cummings four cylinder, home made cab, like new tires, good running, $9500; Gene Stuckle nnn-nnn-nnnn no texts (Davenport WA)
Waukesha six cylinder exhaust manifold, will fit stationary application, has Oliver Diesel cast into it, $50 includes shipping in continental USA, buy it now and get free years subscription to WAIT; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Wehr motor grader, Case L power, good working order, good blade, good tires, antique, $3000; Donald Kravik nnn-nnn-nnnn (Whitehall MT)