Airplane, 1941 PT17 Boeing Stearman, ready for covering, W670 Continental engine, includes parts and paperwork for two planes, retired from aviation; Bruce Burroughs nnn-nnn-nnnn call before 7pm (Redmond OR)
Airplane, Canadian Bush Master, zero time on prop and test stand engine, set up for floats, includes bush tires, retired from aviation, call for details; Bruce Burroughs nnn-nnn-nnnn call before 7pm (Redmond OR)
Airplane, prewar 1940 Luscombe, low time since majored, Continental 65 hp engine, rag wings recovered in 2002, hangered for over 35 years, retired from aviation, reasonable offers considered; Bruce Burroughs nnn-nnn-nnnn call before 7pm (Redmond OR)
Anchor chain, vintage, over 300 feet (football field), 4-1/2-inch links with cross bars, neat looking chain for yard art, $1000 take all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Baler parts, John Deere 14T, most parts, been sitting out; Jerry Van De Walle nnn-nnn-nnnn or nnn-nnn-nnnn (Yamhill OR)
Book: Case Magneto, model 41, dealer service, $28; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Case Magnetos, instructions and operation and care, 1938, $1; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Case Magnetos, models 4-JMA and 4-CMA, dealer service, $28; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Case Magnetos, models 4-JMA, 4-CMA and 4-CAMA aircraft, parts manual, $7; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Caterpillar Track Type Machines Serial Number Reference book, 1925-1960. Indicates start and ending serial numbers, years manufactured, gauge, plant location, gas and diesel. Shows photos of each model and any paint color changes. All models are track type tractors, gas, diesel, loaders, and pipelayers. 62 pages, $25; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Cub, Cub Cadet lawn and garden and Farmall Cub. All models and serial number book, 1947-1974, $15; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Fairbanks Morse, Fundamentals of Magneto Ignition, $28; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Ford Tractors Serial Number and Production Models. Agricultural, industrial, and early lawn and garden, 1917-1979. Also includes full color picture foldout chart of the models, 1917-1983, $12; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: International Harvester Magnetos, service manual for International F-4, F-6, E4A, H-1, Wico H, Wico AH, Wico EK, Wico AP and Splitdorf (Dixie and Aero), $32; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: International Harvester Serial Number book. Includes interpretation of prefix letters, 1921-1953, $10; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: John Deere, serial numbers, Nebraska Tests, horsepower ratings, latest edition, 1918-1994, $25. Earlier editions from new condition and used, 1918-1976 and 1918-1987, ASAE publication, $15-$25; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Minneapolis-Moline Serial Number book, early 1900s-1970s, includes designated model MM tractors, lettered and numbered, also Avery, Twin City, chassis and engine serial numbers and MM equipment. Explains codes for first three digits, its application and the fourth- and fifth-digits codes for chassis serial numbers. Also, the engine serial number codes and the match to the correct engine. Nebraska tests, paint color codes and miscellaneous. 50 pages, $25; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: Steiger 4 Wheel Drive Tractor Model Identification Guide 1969-1998. Serial numbers by model and year. Series 1-4, 1000, Wildcat, Bearcat, Cougar, Tiger, Panther, Powershift Series, etc. Photos, specifications, axle wheel end identification. 104 pages, $34; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Book: White Equipment “Family” Serial Number book, covering Oliver, Cletrac, Minneapolis-Moline, Cockshutt, Avery and White, 1901-1991. By Lloyd McCray, Field Supervisor for White-New Idea Farm Equipment Company. Tractors, engines, and equipment serial number range, years built, codes and their interpretations, plant names and production locations. 93 pages, $32; Jim Robinett nnn-nnn-nnnn (Ontario OR)
Bucket, front loader from older Case 580 backhoe, 81 inches long, needs cutting blade, good solid bucket, $500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Camping trailer, 1970s, Cardinal “Love Bird 16”, has some water damage to the interior, but not all hacked up, in usable condition, new tires, pink slip in hand, reduced price, $1000; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Caterpillar fuel rack setting tools. Cat service manuals D966A, power shift testing and adjusting, DW10, 17000 Cat engine, Cat 22 sales magazine, $40 each. Seals for Cat D4 rollers 7B5638, $2 each; Jim Ronsse nnn-nnn-nnnn (Chicago Park CA)
Cement mixer, Gilson Bros., model MD 7-P-T, powered with a V4 Wisconsin, runs good, trailer mounted, $2250, located CA central coast, Templeton; Paul Valentine nnn-nnn-nnnn (Montesano WA)
Chainsaws, vintage, several, Titan, McCullough, Homelite, HOE, etc., none run but turn over, most are complete in good condition, $50 and up depending on saw. Also vintage rare length chainsaw bars, don’t know what they came off, five to seven foot, no chains, $75 each and up; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Chipper/shredder, Troy Built, Super Tomahawk, 8 hp, like new, $750; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Wilsonville OR)
Commodore 64 system with lots of set up stuff, some in original boxes, too much to list here, call for specifics, $300; Mike nnn-nnn-nnnn (Puyallup WA)
Country estate sale, 12150 Overland Dr, off Keno-Worden Rd, May 1st-May 3rd, gates open 9-3. Tools, tractor parts, collectible farm implements, lawn furniture, picnic tables, gardening, outdoor déco, antiques and collectibles, antique clocks, furniture, record player, beds, couches, antique table and chairs, something for everyone, bring your own boxes/bags, don’t want to miss, too much to list; Carol Gay nnn-nnn-nnnn (Keno OR)
Cracked black walnuts, $4/lb., uncracked $3/lb.; J Keith nnn-nnn-nnnn (Hermiston OR)
Craftsman 10-inch radial arm saw on metal stand with caster wheels, $150; J Keith nnn-nnn-nnnn (Hermiston OR)
Cyclone dog kennel, 10’x10’, six-foot-tall, three-foot gate, $175; Quentin nnn-nnn-nnnn no texts (Hermiston OR)
Disc: John Deere RW, 12-foot, wheel disc, nice shape, $850; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Electric motors: NOS. two 1/2 hp, one phase, $99. Two 1 hp, one phase, 56 fr, C face, $139. Four 1 hp, three phase, 145T fr, $99. Two 1-1/2 hp three phase, 145T fr, $108. Three 3 hp three phase 182T fr, $142. One 5 hp three phase 184T fr, $168. One 10 hp three phase 215T fr, $246. One 20 hp three phase 256T fr, $486. One 15 hp three phase used, $275. One 40 hp three phase 240V, $477; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Ferguson hydraulic loader with manual trip bucket, complete, loader is off a TO30, can send pictures, reduced to $775; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Fire hydrant, yard ornament, came from City of Heppner OR, $2000; J Keith nnn-nnn-nnnn (Hermiston OR)
Fresno drag, small, excellent shape, single horse drawn, 25-inch-wide with ripper teeth, $150; Quentin nnn-nnn-nnnn no texts (Hermiston OR)
Fresno type scraper, 3pt, $200; Fred nnn-nnn-nnnn (Bandon OR)
High arch over the row cultivator frame and wheels, includes the base to attach the cultivators, $100, Planet Jr/Hoss?; Mike nnn-nnn-nnnn (Puyallup WA)
Hydraulic fluid, surplus, case of 24 quarts, $18 per case; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Hydraulic unit, all in one, ran by PTO or belt pulley, was on a little crawler to lift blade, includes driveshaft with belt pulley which drives pump with a reservoir tank and lever control all in one, have about 15 inch ram to go with it, $300 for all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Implements: spreader, metal spin, Euro Span S2371, 3pt, $225. Cultivator, Agric rotocultivator, new, used one hour, $1395. Box scraper, 3pt, eight foot, $250; Ken nnn-nnn-nnnn or xxxx@xxxx.xxx (Wilsonville OR)
International 64 combine, pull type, no motor, six-foot header, good canvas, sone new belts, $2750; Florian Nordhus nnn-nnn-nnnn (Connell WA)
John Deere roll bar with top for new generation tractors, will fit 3020, 4020 tractors, comes with all mounting hardware, $600; Augie nnn-nnn-nnnn (Merced CA)
John Deere wagon, has hydraulic brakes, would make a good wagon to use with a team of horses, $800; Rob nnn-nnn-nnnn (Prineville OR)
Lanterns, antique, two available, wall mount, about 30-inch-tall and 20-inch-deep, iron mounting brackets, original rough glass is good, some rust, $125; Don nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
Large cherry picker on steel casters, 1000 lb. capacity, $100; Fred nnn-nnn-nnnn (Bandon OR)
Lathe, Southbend, $1800; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Logging blocks/pulleys, lots, large and small, Skookum and many other good well-built brands, large shackles, cable slip hooks, etc. sell all or separate, call for prices, reasonable; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Magazines, Two Cylinder, volume 25 number 1-6, all are new, still in the plastic, never opened, $25 plus postage; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Meat, Duroc pork, $3/lb. hanging weight, selling half or whole; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Metal Halide 400-watt fixtures, Multivolt, 24-inch square, horizontal mount, NOS in box, more than 10 available, $99 each; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Metal sled, tow behind, 52-inch x 25-inch deck for snowmobile or four-wheeler, $200; Quentin nnn-nnn-nnnn no texts (Hermiston OR)
Mining and blacksmith items for sale: ore cars, ore buckets, hydraulic monitors, pumps, iron wheels, boilers, winches, etc. Call for your wants and prices; Ron nnn-nnn-nnnn (Grass Valley CA)
Minneapolis Moline hydraulic loader, 68-inch bucket, complete, can send pictures, reduced $775; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Mower: John Deere M-51 for rear of M, complete, needs pitman stick, $200; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Mystery clock, same appearance, description, dimensions as the Etalage Mystery Clock, no external identification, plugged in it runs, but doesn’t keep good time, black bakelite base, can send pics, $100; Mike nnn-nnn-nnnn (Puyallup WA)
New Holland side delivery hay rake, ground driven, works just fine, rake in good shape, $850; Rob nnn-nnn-nnnn (Prineville OR)
Oliver 70 parts tractors, $200 each, two available, also engine parts, radiators, and rims; Larry nnn-nnn-nnnn (Dexter OR)
Perfect Circle Piston Nurilizer, SN 2050, all original red and appears complete, always stored inside, all cast iron, on stand, weighs about 1000 lbs., $800, photos available, delivery possible from Grants Pass OR; Steve Schroeder nnn-nnn-nnnn (Grants Pass OR)
Plow, John Deere L-LA single bottom, excellent used condition, complete with all brackets, hitch plates, levers, owners/parts manual, $250; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)
Plows: 2pt, one bottom, roll over, $275. 2pt, two bottom, $275. All restored a couple of years ago; Florian Nordhus nnn-nnn-nnnn (Connell WA)
Plows: Dearborn, 3pt, two bottom, two available, $200 and $250. Lindeman two way, 3pt, early roll over, $250; Fred nnn-nnn-nnnn (Bandon OR)
Plows: John Deere 3pt, 2-10-inch bottoms, $125. International 3-16 on rubber, hydraulic control, needs tires, $100. Allis Chalmers 1-16 with cast moldboard, $50; Jerry Van De Walle nnn-nnn-nnnn or nnn-nnn-nnnn (Yamhill OR)
Plows: McCormick 4-16-inch, heavy plow, trip lift, on rubber screw adjuster, $400. John Deere 680 6-16 pull plow, big beam, needs parts, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Railroad items: switch stand, $150. Railroad crossing sawbuck, $200; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Service manual, John Deere M, $25, postage paid; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)
Service manuals: Caterpillar 627B tractor scraper, 2-1/4” thick, $25. 651C, 633C wheel tractor scraper, 2-1/4” thick, $25. 657B, 666B wheel tractor scraper, 3-1/2” thick, $35. 16G motor grader, 2-1/4” thick, $25. 992C wheel loader, 3” thick, $30. 966C wheel loader, 3” thick, $30. Electric service generators, 2-1/2” thick, $25. 215 excavator, 3304, 3306 engines, 1-3/4” thick, $25. 225, 235 excavators, 1-3/4” thick, $25. Free postage; Dick Lloyd nnn-nnn-nnnn or xxxx@xxxx.xxx (Lewiston ID)
Sewing machine, Singer Featherweight model 221, real nice, in original carrying case, $550; J Keith nnn-nnn-nnnn (Hermiston OR)
Shop equipment: Napa alternator/generator tester #1836. JoNAN Honda service tester. Sioux #620 valve grinder. Snap-On Blue Point valve seat grinder and stone dresser. Black and Decker Vibro-Centric valve seat grinder and stone dresser and valve lapper. All used, I can email pics; Don nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)
Shopmaster Bandsaw, six inch, made in Minneapolis MN, $50; J Keith nnn-nnn-nnnn (Hermiston OR)
Sickle bar mower, 2p, one five foot and one six foot, $225. All restored a couple of years ago; Florian Nordhus nnn-nnn-nnnn (Connell WA)
Sickle bar sharpener, electric, on stand, $75; Quentin nnn-nnn-nnnn no texts (Hermiston OR)
Sioux valve grinder, cabinet, $500; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)
Snowplow, 10-foot, Gledhill Road Machinery, angle blade only, good condition, no mounting unit or hydraulics, $395, can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Snowblower, Loftness Model #721S, six-foot-wide, SN 12-D-40, used with 3pt hitch with PTO, only used a few times of the year at second home, good condition, $1500; Frank nnn-nnn-nnnn (Morgan Hill CA)
Tire chains, 8N or others with 11.2 or 12.4x28 tires, $100; Fred nnn-nnn-nnnn (Bandon OR)
Tractor and farm equipment literature and brochures, 1940, 1950, 1960, 1970s, over 200 pieces, make offer, can deliver to WHEAT swap meet in March; Augie nnn-nnn-nnnn (Merced CA)
Trailer, all steel bumper pull, 8’x20’, trailer house axles with spares, needs lights, $1500; Rob nnn-nnn-nnnn (Prineville OR)
Trailer, double drop Peerless low bed, 10.22 tires for off highway use, sold with bill of sale, located in Rochester WA, $1550; Paul Valentine nnn-nnn-nnnn or xxxx@xxxx.xxx (Montesano WA)
Travel trailer, Komfort, 27-foot, fifth wheel, $8000; Hubert Bierly nnn-nnn-nnnn (Bend OR)
Van Norman drum brake lathe, appears complete, extra collets etc., may be possible to turn small flywheels? Cast iron, original red paint, weighs about 1200 lbs., $400, photos available, delivery also possible; Steve Schroeder nnn-nnn-nnnn (Grants Pass OR)
Water well drilling rig from the late 1890s, free to good home, you haul; Phil nnn-nnn-nnnn (Red Bluff CA)
Wheel weights, fit 16” front wheels, weights are in halves, two per wheel, $200; J Keith nnn-nnn-nnnn (Hermiston OR)
Wheels, implement, have two 24-inch wheels, may be from a manure spreader, $20 each; Hubert Bierly nnn-nnn-nnnn (Bend OR)
Windmill, Fairbanks Morse, Aermotor, sail, etc. blades are bent, make offer; Carol Gay nnn-nnn-nnnn (Keno OR)
Wooden wheels, four available, 45-inch diameter, 2-1/4-inch-wide, very good, always stored inside, $1000 obo; Bob Qualey nnn-nnn-nnnn (Silverton OR)