Allis Chalmers 6b, four-cylinder AC motor, strong canopy, big drum with new cable, blade with good hydraulics, runs good, $7000 obo; Robert Doud nnn-nnn-nnnn (Chiloquin OR)
Allis Chalmers tractor, 40s maybe?, SN C61036 has a loader and hydraulic 3pt, not running but engine is free, complete, $500 if you haul, additional cost if we haul, call or text; Sirenna Smith nnn-nnn-nnnn (Weippe ID)
Allis Chalmers U, Continental engine, series 4843, needs restoration, reasonable offer; Tony Hempe nnn-nnn-nnnn (Hermiston OR)
Allis Chalmers U, Continental engine, series 844, needs restoration, reasonable offer; Tony Hempe nnn-nnn-nnnn (Hermiston OR)
Allis Chalmers U, Waukesha engine, series 13148, needs restoration, reasonable offer; Tony Hempe nnn-nnn-nnnn (Hermiston OR)
Allis Chalmers WC tractors, two available, last chance before being scrapped, $350 obo for the pair, previous buyers have been no shows or backed out, tractors are both fairly complete, one has rear wheel weights, pictures on request; Kyle nnn-nnn-nnnn (Modesto CA)
Beet diggers, both self-propelled, single front wheel, mounted on Allis Chalmers 45s, one four cylinder, one six cylinder, $1000 each obo; Sam Sweeney nnn-nnn-nnnn (Dayton OR)
BF Avery model V, 1944, nicely restored, good running Hercules engine, great for parades or shows, $3500; Dan nnn-nnn-nnnn (Fairfield CA)
Bobcat 500 skid steers, three available, parts or restore, $2500; C Wallace nnn-nnn-nnnn (Toledo WA)
Case 12-20 (cross motor) power unit for parts, bit rusty, but a lot of good parts, nice looking water pump, mostly complete but no magneto, bottom of carburetor is missing, manifold poor, email best; Nathan Kehler nnn-nnn-nnnn or xxxx@xxxx.xxx (Newgate BC)
Case 310 crawlers, four available, three gas and one diesel; C Wallace nnn-nnn-nnnn (Toledo WA)
Case 580 front bucket, older model, 81 inches long, needs cutting blade, good solid bucket, $500; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Case 600 Wheatland, 6-cylinder diesel engine free, nice shape, low production, $2500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, 1936, not running, complete, very straight tractor, $850; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of other parts. Case C, S, or R&H HC245 rear round spoke wheels, 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CC4, 1936, not running, complete, about 1200 of this model made, $850; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case CO, 1929, not running, complete, $500; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case DO orchard sheet metal, three sets available, each set has three pieces: left and right fenders and center steering wheel shroud, $450-$650, can send pictures; Gary Wright nnn-nnn-nnnn (La Verne CA)
Case parts, VA, C, too many to list, call with needs; Steve Zane nnn-nnn-nnnn (Paynes Creek CA)
Case SC, 1947, SN 5104350, runs, sheet metal good, rebuilt generator and magneto, wide front, $500 obo; Dennis Thieren nnn-nnn-nnnn (Fairfield WA)
Case tractor parts: VAC model: hood, side panels, battery box, floorboards, radiator, belt pulley with hydraulic pump, distributor, engine head, seats and steering parts, three sets of rear weights, plus misc. parts. SC model: engine parts including good block and high compression head, oversized M&W aluminum pistons, hood, dash, battery box, seat assembly, steering parts and other SC parts. 400B, 500B and 600B front grille and side panels; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case, 1947, restored, has always been garaged, $8000; Dan York nnn-nnn-nnnn (Stevensville MT)
Caterpillar 10, pile of parts, $700; Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar 30, fair tractor, good radiator, no manifolds; Gene Stuckle nnn-nnn-nnnn no texts (Davenport WA)
Caterpillar 955L, SN 71J3592, runs and functions good, undercarriage ok, gp bucket, bare back end, has some oil leaks, $4500; Dennis Gullick nnn-nnn-nnnn or xxxx@xxxx.xxx (Redwood Valley CA)
Caterpillars: Cat 22, three available. Cat 30. $1200 for all; Bob Pearce nnn-nnn-nnnn (San Jose CA)
Cletrac AD, 1937, starter worked on, fuel pump, new paint, refurbished, $2000 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Cletrac AD2, 1936, refurbished fuel pump, valves ground, starter cleaned, Isaacson hydraulic blade, $2400 obo; Bob Arndt nnn-nnn-nnnn (Cromberg CA)
Farmall A to 450 sheet metal plus miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall C and Super C, both are complete with hydraulics, starters, generators, carburetors, etc., both are likely stuck, $600 each, great for restoration, yard art or parts, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
Farmall tractor parts for M, H, C, B, A and Cub, what do you need?; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Ferguson TO 35, 1955, very strong motor, everything works, like new tires, very clean, good running, pictures on request; John Dornbusch nnn-nnn-nnnn (Brooking OR)
Ferguson, TE3411, one with aluminum transmission and casing, no starter, $1500; Ed Barbosa nnn-nnn-nnnn (Morgan Hill CA)
Ford 841, Elenco four-wheel drive, power steering, manual reverser, runs great, very nice little tractor, can send pictures, $8500; Tim Bynum nnn-nnn-nnnn or xxxx@xxxx.xxx (Yreka CA)
Ford 8N orchard sheet metal, left and right fenders, $750; Gary Wright nnn-nnn-nnnn (La Verne CA)
Ford 8N, 1949, runs good, includes back blade, $1800; Gary Thieman nnn-nnn-nnnn (Buckley WA)
Ford 8N, 1950, runs well, good battery, tires ok, hydraulics work, has lights, rear view mirror, front grille guard, $3900; Wendell Newman nnn-nnn-nnnn (Carson City NV)
Ford 8N, 1951, side distributor, Sherman high/low transmission, tachometer (proofmeter), 12V, new gas tank, carburetor, wiring, tunes up, good metal and tires, runs great, comes with six foot rotating blade and miscellaneous 3pt implements, $3750; Claude Foley nnn-nnn-nnnn (Pioneer CA)
Ford 8N, rebuilt motor, runs good, looks like a new one, good tires, 12V, $2750; Vern Fought nnn-nnn-nnnn (Exeter CA)
Ford 900, gas, runs good, looks like a new one, good tires, $3750; Vern Fought nnn-nnn-nnnn (Exeter CA)
Ford 961, 1955, dual hydraulics, new battery, starter, and solenoid, power steering, $2500; Luther Davis nnn-nnn-nnnn (Battle Ground WA)
Ford 9N, 1939, metal good, runs good, Dearborn brush hog about 1957, $1500 for both; Dan nnn-nnn-nnnn or Avery nnn-nnn-nnnn (Fairfield CA)
Ford 9N, 1939, metal good, runs good, Dearborn brush hog about 1957, $1500 for both; Dan nnn-nnn-nnnn (Fairfield CA)
Ford 9N, 3pt lift quadrant, partially aluminum, early version, probably 1939, it is shown on page 36 of Originality Guide Ford N series tractors, nice piece with handle intact, $200; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ford 9N, project, tin is poor, tires are poor, engine is loose and pretty complete, $400, can help load; Jon Rodgers nnn-nnn-nnnn (Sonora CA)
Ford, pre 1950, good tires, does not run to our knowledge, has a Shawnee front loader on it, pictures available, $500; Alan Curriston nnn-nnn-nnnn (Eagle Point OR)
Fordson Major backhoe, older, running, $2500; Carol Gay nnn-nnn-nnnn (Keno OR)
International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International 3200 skid steer hydraulic lift cylinders, also drive pump and other miscellaneous parts, take all for $400; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
International C, with loader, reasonable offer; Tony Hempe nnn-nnn-nnnn (Hermiston OR)
International Cub rear fenders, two available, $20; Dennis Thieren nnn-nnn-nnnn (Fairfield WA)
International tractor, pre 1960s, front bucket and rear brush hog, good tires, was working four years ago, but haven’t tried lately, $800, pictures available; Alan Curriston nnn-nnn-nnnn (Eagle Point OR)
John Deere 1010 crawler parts for sale, no hood or grille; Bob Gauntt nnn-nnn-nnnn (Vancouver WA)
John Deere 40-420-430 belt pulley, $200; Dave nnn-nnn-nnnn (Aurora OR)
John Deere 420 crawler, heavy duty hydraulic tilt blade, manual angle, rare 3pt hitch, no top link, good undercarriage, good sheet metal, canopy, reverser does not work, main transmission works great both reverse and forward, recent clutch, steers both ways, very nice hard to find machine, drives good, call for info, $8900; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 crawler, long track, with Holt hydraulic tilt blade, sat for years, has good track chain, pads and sprockets are wore but usable, motor is stuck, crawler is complete with canopy, good sheet metal, selling as is for parts or restore, can ship, $2200 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 crawler, nice Holt hydraulic blade, four roller, motor runs but needs carburetor work or replacement, has good oil pressure, steers excellent both ways, real nice undercarriage, probably around 90%, clean little crawler, nice sheet metal, PTO off the back, very nice, $4500, can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 430w, 1959, options include: Float-O-Ride seat, spin out rear wheels, dual Touch-O-Matic rockshaft hydraulics, five speed transmission, has newer steering wheel, tune up, plug wires, rewire, PTO bearings and seals, tachometer cable, new brake seals, new brake discs, new brake springs, freeze plugs, antifreeze. Spare parts include complete dual Touch-O-Matic rockshaft assembly and repairable spare axle. Spring tooth, scraper and gopher bait tool included, pictures on request, $3000 obo, negotiable depending on implements wanted; Kyle nnn-nnn-nnnn (Modesto CA)
John Deere 440I, gas, wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt and side shift) work, decent tires and sheet metal is good, have original Blackwelder manuals as well as copies of the 440 manuals, $3900, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 520 hood, nice, $100; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 720 nose piece, includes grille, needs paint, $150; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 840 scraper, tractor only, electric start, engine free, parts tractor, lots of parts fit and 820 or 830; Chris nnn-nnn-nnnn (Turlock CA)
John Deere 840 with scraper, complete original condition, Deere can, electric start, good original tires, not stuck, very little use, possible hauling, $4500; Chris Visser nnn-nnn-nnnn (Turlock CA)
John Deere A, 1936, SN 418806, unrestored, not running, engine not stuck, $1200 obo; Dan Meyer nnn-nnn-nnnn leave message (Placerville CA)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere AN, 1948, single front wheel, good tires and tin all around, starts easily and runs great, charging system works, $2400, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere AO, electric start, belonged to a friend, $1650; Dave nnn-nnn-nnnn (Aurora OR)
John Deere AWH, 1946, spoke rear wheels, high clearance and wide front end, only 327 made in nine years of production, runs and drives, $2900, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere B wide front pedestal and steering shaft, no welds, $50 obo; Kyle nnn-nnn-nnnn (Modesto CA)
John Deere B, 1935, SN 3124, runs good, nice paint, very good rubber, $4500; Dan Meyer nnn-nnn-nnnn leave message (Placerville CA)
John Deere D, 1948, restored in 2005; Dave nnn-nnn-nnnn (Grass Valley CA)
John Deere DI, 1949, electric start, good tires, runs good, starts gas and runs on distillate, weighs 5250 lbs., $3000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $2600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere hood and grille for 420, some dents and rust, photos available, $250 obo; D. Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere LA, 1944, SN 9097, runs good, good tires, rear wheel weights, needs new restoration, generator not working, $2000 obo; Dan Meyer nnn-nnn-nnnn (Placerville CA)
John Deere LA, 1945, SN 11102, parade ready, new paint, decals and rubber, needs starter work, photos available, $3950; D. Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere LA, tires are bad, engine is stuck, $500 obo; Florian nnn-nnn-nnnn (Connell WA)
John Deere L-LA belt pulley, $225; Dave nnn-nnn-nnnn (Aurora OR)
John Deere M, $1800; Dan Christensen nnn-nnn-nnnn (Borrego Springs CA)
John Deere round tube wide front, complete, fits A, B, or G with split pedestal, complete including hubs, steering arms, tie rods, mounting plates, all mounting bolts, nothing is either broken or repaired, everything in very good condition, ready to go to work on your tractor, $995; John Boehm nnn-nnn-nnnn leave message or prefer email xxxx@xxxx.xxx (Woodland CA)
John Deere tractor, pre 1960, new tires, does not run, $400, pictures available; Alan Curriston nnn-nnn-nnnn (Eagle Point OR)
John Deere unstyled gas tanks, can send photos; Jim Barratt nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
John Deeres: Hs, three available. JD early D and AR; C Wallace nnn-nnn-nnnn (Toledo WA)
Massey Harris 30G row crop, 1951, ran when parked, newly rebuilt radiator, excellent sheet metal, rear tires poor, single front, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Massey Harris 44 tip toe wheels, $400; Gene Stuckle nnn-nnn-nnnn no texts (Davenport WA)
McCormick Deering I-4, turns over, good shape, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O4, parting out, orchard belt pulley, shutters, plus miscellaneous; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering OS4, 1948, standard, restored in 2006; Dave nnn-nnn-nnnn (Grass Valley CA)
McCormick Deering WK-40, full steel, original engine free, $3000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Meyers bulldozer pump, turns over, $75; Dave nnn-nnn-nnnn (Aurora OR)
Minneapolis Moline collection, seven total: 1948 Z, 1960 R, 1955 445, 1948 U, 1956 5 Star, 1957 U, 1959 restored propane ZB; Gary Clark nnn-nnn-nnnn (North Plains OR)
Minneapolis Moline G1000 Wheatland diesel, 1966, 105 hp, 18.4-34 rears, 100-16 fronts, factory cab with all glass, four remotes, Amplitorque, good sheet metal, duals, rear main seal leak, can send pictures, $4450 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline GVI, 1960, diesel, 68 hp, 540 PTO, 23.1-26 rears, 7.50-18 fronts, cab with all glass, good sheet metal, two remotes, with nine foot Cancade hydraulic, two way, front blade, will sell with or without blade, blade available separately, can send pictures, $4450 with blade obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UTS, 1950, parting out, have 3/4 of the tractor, good rear end, some lower engine parts, grille, etc., email is best; Nathan Kehler nnn-nnn-nnnn or xxxx@xxxx.xxx (Newgate BC)
Minneapolis Moline UTU, 1946, restorable or for parts, never had it running, can send pictures, $1250 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline Z parts tractor, can send pictures, $250; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
New Holland Harobed 1045 WNS, running when parked, good condition, $4000; John Robie nnn-nnn-nnnn (Milton CA)
Oliver 70 parts: flat band front wheels, row crop wide front knees, belt pulley manifold and miscellaneous part; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 70s, two available, parts tractors, stuck, $200 each. Also, lots of 70 parts: radiators, engine parts, rims; Larry nnn-nnn-nnnn (Dexter OR)
Parting out: Allis Monarch 35. Caterpillar 20 and 30. Massey Ferguson 65 gas; Buck Evans nnn-nnn-nnnn (Greenville IL)
Tires: BF Goodrich Silvertons, 7x38 (7.5x24), 10 ply, tubes and flaps, new, $1200 for the pair. 7.50x24 front grader tires, 10 ply, Pennsylvania brand, good live rubber, $1000 obo; Tom Godish nnn-nnn-nnnn (Portland OR)
Tires: two 23.1x26 BFG, new old stock, never mounted, 45-degree bar, stored inside, $2800; Chris nnn-nnn-nnnn (Fresno CA)
Wagner, with four Cummings four-cylinder, homemade cab, like new tires, good running, $9500; Gene Stuckle nnn-nnn-nnnn no texts (Davenport WA)
Waukesha six-cylinder exhaust manifold, will fit stationary application, has Oliver Diesel cast into it, $50 includes shipping in continental USA, buy it now and get free years subscription to WAIT; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Wheel weights: Farmall Cub rears, $75 each. Farmall C, $80 each; Florian nnn-nnn-nnnn (Connell WA)
Wheels (two): John Deere 8x24, waffle type, good shape, $400; Vern Fought nnn-nnn-nnnn (Exeter CA)