Bulldog, 6 hp, SN B17087, old style long carburetor, on iron wheel cart, painted, heavy engine runs good, $5000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Challenge, 2 hp, SN 3097, runs, complete on steel wheel cart, $1800; Rich Hanna nnn-nnn-nnnn (Rexford MT)
Cushman Cub gas engine parts, lots of various parts, $150 for all or individual parts available, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
Cushman Cub R20, 3 hp, year unknown, on nice iron cart, good looking and good running engine, $450; Roger Hahn nnn-nnn-nnnn or xxxx@xxxx.xxx (Glendora CA)
Delco four-cylinder light plant, air cooled, 110V DC, dead or alive, need: generator, armature, fields, switchbox, innards; Jim Barratt nnn-nnn-nnnn or xxxx@xxxx.xxx (Camas WA)
Engine collection: Associated 2-1/2 hp, $850. Delco 36V light plant, $350. Economy E, 1-1/2 hp, 1920, $675. Economy S, 2-1/2 hp, 1923, $275. Fairbanks ZC, 3 hp, $225. Fairbanks ZD, 2 hp, $125. Fairbanks Z, 3 hp, $525. Fuller and Johnson, 3 hp 1923, on cart, $800. Hercules, 1-1/2 hp, 1919, $275. Ideal Upright, 2-1/2 hp, on cart, $750. McCormick Deering LBA, 1-1/2-2-1/2 hp, 1942, $425. McCormick Deering LBB, 3-5 hp, 1945, $575. Ottawog, 4 hp, $550. R&V, 1 hp, $900. Sattley G, 1-1/2 hp, $400. Stover CT in Wonder Mixer, 2 hp, $900. Witte, 4 hp, 1916, on cart, $575. Witte, 5 hp, $750. Briggs and Stratton WBB in Montgomery Wards Speed Queen washer, $350; Clay Rhoden nnn-nnn-nnnn (Prineville OR)
Engine collection: New Way, 3-1/2 hp, $2800. Lawson-Lawton 4-1/4 hp, $2000. Stover K, 1-1/2 hp, $850. Alamo, 1-1/2 hp, $700. International, 1-1/2 hp, $650. Stover V, 1 hp, $650. Fairbanks Morse Z, 1-1/2 hp, $550. International LA, 1-1/2 hp~2-1/2 hp, $450. All engines run, restored and painted on cart, pictures on request; Jess Riker nnn-nnn-nnnn (Beaver UT)
Fairbanks head, large, with good valves, has spark plug hole, hp unknown, $100; Dave nnn-nnn-nnnn (Aurora OR)
Fairbanks Morse Z, 2 hp, 1928, on iron wheel cart, good looking and good running engine, $450; Roger Hahn nnn-nnn-nnnn or xxxx@xxxx.xxx (Glendora CA)
Fairbanks Morse Z, 6 hp, runs good with crank guard, AB33 rebuilt magneto and starting crank, needs original style fuel tank and fuel line, runs on a carburetor bowl, good project for young collector with low budget, $375; Mike Tyler nnn-nnn-nnnn (Ridgecrest CA)
Fairbanks Morse, 1-1/2 hp, headless, Sumter magneto, complete, runs, on cart, $450; Rich Hanna nnn-nnn-nnnn (Rexford MT)
Fairbanks Z, 7-1/2 hp, 1919, $675; Clay Rhoden nnn-nnn-nnnn (Prineville OR)
Field and Brundage, 5 hp, 1915, hit and miss, disc speed control, has pulley, complete except muffler, has repaired head, Webster magneto and bracket and trip, $500, pictures available; Alan Curriston nnn-nnn-nnnn or xxxx@xxxx.xxx (Eagle Point OR)
Fuller and Johnson N, 1-1/2 hp, SN 17171, 1914, ignitor, coil, battery start, on cart, complete, runs, $550; Rich Hanna nnn-nnn-nnnn (Rexford MT)
Fuller and Johnson N, 3 hp, SN 81519, 1923, ignitor, battery coil start, on cart, complete, no pulley, runs, $800; Rich Hanna nnn-nnn-nnnn (Rexford MT)
Fuller and Johnson, 7 hp, 1923, on cart, $1500; Clay Rhoden nnn-nnn-nnnn (Prineville OR)
International Famous, 4 hp, 1910, hit and miss, ignitor ignition, hopper cooled, on nice cart, runs good, can send pictures, $4300; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
International stationary engine grille, $70. Several stationary IHC engines off balers, combines, etc.; Wendell Newman nnn-nnn-nnnn (Carson City NV)
John Deere E, 3 hp, has been rebuilt, $875; Dave nnn-nnn-nnnn (Aurora OR)
Lister D parting out, block is bad, no head/carburetor/magneto, have most of the rest, let me know what you need and will check for it; Nathan Kehler nnn-nnn-nnnn or xxxx@xxxx.xxx (Newgate BC)
Lunkenheimer carburetor, 3/4 LH, nice condition, $100; Dave nnn-nnn-nnnn (Aurora OR)
Maytags: vertical, $600. 92s, $250-$350. All run, pictures on request; Jess Riker nnn-nnn-nnnn (Beaver UT)
Mohawk marine engine, $750; Buck Evans nnn-nnn-nnnn (Greenville IL)
Perkins engines: new four-liter engine and one used four-liter engine, package deal, $1700. Six-liter turbocharged engine, set up for stationary use, $2000; Eric nnn-nnn-nnnn (Amity OR)
Samson, 4 hp, #4072, can run on propane or gasoline, on iron wheel cart, painted, gas needle valve sticks sometimes, $5000; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Samson, 6 hp, on iron wheel cart, #3454, 1910, painted, runs on gasoline, has been shown many times, also the Samson water pump that the engine ran, $6000 for both; Wilbur Reil nnn-nnn-nnnn (Davis CA)
Schmidt chill cylinder, 1-1/2 hp type B, rare, 1908, $3200 now $2800; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Schmidt chill cylinder, 3 hp type H, SN X7597, 1907, buzz coil, $2500; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Stover Junior, 2-1/2 hp, 1915, hit and miss, repaired head and rocker, homemade tank, missing Webster magneto and bracket, has Lunkenheimer carburetor, needs muffler, $175; Alan Curriston nnn-nnn-nnnn (Eagle Point OR)
Stover K parts, 1-1/2 hp, recast detent/speed control assembly; Nathan xxxx@xxxx.xxx (Newgate BC)
Therma King, four-cylinder diesel Isuzu C201, naturally aspirated, ran when pulled, will turn over, unknown hours, $1000 obo; Adam nnn-nnn-nnnn (Weippe ID)
Waterloo Boy, 2-1/2 hp, ignitor, runs good, big wheel cart, $1800; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
Waterloo engine new/recast parts: governor gear, speed control assembly, trip assembly, pushrod end, cam roller/pin; Nathan xxxx@xxxx.xxx (Newgate BC)
Witte, 2 hp, 1924, runner, missing gas tank, crank guard and oiler, $400; Kip Keeney nnn-nnn-nnnn or xxxx@xxxx.xxx (Seattle WA)
Witte, 5 hp, 19??, upright diesel engine, complete although block has been cracked and repaired, repair could be improved upon, pictures available, $900; Alan Curriston nnn-nnn-nnnn (Eagle Point OR)
Witte, 7 hp, buzz saw engine, two blades, complete on original cart, stored inside for 25 plus years, $4000; Rich Hanna nnn-nnn-nnnn (Rexford MT)