May 2020 - Misc. For Sale

All Classified Ads

Airplane, 1941 PT17 Boeing Stearman, ready for covering, W670 Continental engine, includes parts and paperwork for two planes, retired from aviation; Bruce Burroughs nnn-nnn-nnnn call before 7pm (Redmond OR)

Airplane, Canadian Bush Master, zero time on prop and test stand engine, set up for floats, includes bush tires, retired from aviation, call for details; Bruce Burroughs nnn-nnn-nnnn call before 7pm (Redmond OR)

Airplane, prewar 1940 Luscombe, low time since majored, Continental 65 hp engine, rag wings recovered in 2002, hangered for over 35 years, retired from aviation, reasonable offers considered; Bruce Burroughs nnn-nnn-nnnn call before 7pm (Redmond OR)

All in one hydraulic unit, ran by PTO or belt pulley, was on a little crawler to lift the blade, includes drive shaft with a belt pulley which drives a pump with a reservoir tank and lever control all in one, comes with two short hydraulic rams, $300 for all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Anchor chain, vintage, over 300 feet (football field), 4-1/2-inch links with crossbars, neat looking chain for yard art, etc., $1000 takes all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Baler parts, John Deere 14T, most parts, been sitting out; Jerry Van De Walle nnn-nnn-nnnn or nnn-nnn-nnnn (Yamhill OR)

Blocks/pulleys, lots of old logging rigging, large and small, Skookum and many other good well built brands, also large shackles, cable slip hooks, etc., sell all or separate, call for prices, very reasonable; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)

Camping trailer, 1970s, Cardinal “Love Bird 16”, has some water damage to the interior, but not all hacked up, in usable condition, new tires, pink slip in hand, reduced price, $1000; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Caterpillar manuals: “Servicemen’s Reference Book for Diesel Engines”, form 5060 dated Jan 1939, tight binding, no missing pages, multiple spots and smudges. “D7 Tractor Parts Catalog for 7M4325-9999 and 3T1 and up”, tight binding, clean pages, labeled for machine 3T3171, 1945 Cat sold to Pendleton Ranches. $20 for the pair including postage, photos available by email; Mark nnn-nnn-nnnn (Hillsboro OR)

Country estate sale, 12150 Overland Dr, off Keno-Worden Rd, May 1st-May 3rd, gates open 9-3. Tools, tractor parts, collectible farm implements, lawn furniture, picnic tables, gardening, outdoor déco, antiques and collectibles, antique clocks, furniture, record player, beds, couches, antique table and chairs, something for everyone, bring your own boxes/bags, don’t want to miss, too much to list; Carol Gay nnn-nnn-nnnn (Keno OR)

Cultivator, Planet Jr., several attachments and chains, needs one tire, $150; Rich Hanna nnn-nnn-nnnn (Rexford MT)

Disc, John Deere RW, 12-foot, wheel disc, nice shape, $850; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Electric motors: NOS. two 1/2 hp, one phase, $99. Two 1 hp, one phase, 56 fr, C face, $139. Four 1 hp, three phase, 145T fr, $99. Two 1-1/2 hp three phase, 145T fr, $108. Three 3 hp three phase 182T fr, $142. One 5 hp three phase 184T fr, $168. One 10 hp three phase 215T fr, $246. One 20 hp three phase 256T fr, $486. One 15 hp three phase used, $275. One 40 hp three phase 240V, $477; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Ferguson hydraulic loader with manual trip bucket, complete, loader is off a TO30, can send pictures, reduced to $775; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Fire engine body, off 86 Ford F350, has hose reel and PTO pump, $2000 obo, will consider trades, call or text; Sirenna Smith nnn-nnn-nnnn (Weippe ID)

Ford 1-1/2-ton chain hoist, works good and is heavy duty, $40; Kyle nnn-nnn-nnnn (Modesto CA)

Galion Motor Grader parts book, Model #T500L, SN 02944 and up, $15; Florian nnn-nnn-nnnn (Connell WA)

Grinder for shop, large pedestal, 3-phase, two 16-inch stones, heavy, $600; Bill nnn-nnn-nnnn (Lodi CA)

Hydraulic fluid, surplus, case of 24 quarts, $18 per case; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

International 64 combine, pull type, no motor, six-foot header, good canvas, some new belts, reduced to $175; Florian Nordhus nnn-nnn-nnnn (Connell WA)

Iron wheel cart, large, make good engine cart, $350; Dave nnn-nnn-nnnn (Aurora OR)

John Deere 520 Service School Information, JD didn’t publish a manual specifically for the 520/530, this is additional updated to the Model 50 manual SM2010, $25 plus shipping; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Kimball OR)

John Deere 620 Service School Information, JD didn’t publish a manual specifically for the 620/630, this is additional updated to the Model 60 manual SM2008, $25 plus shipping; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Kimball OR)

John Deere carburetor manuals by Marvel Schebler: Carburetor Application list, covers early model tractors and equipment through New Generation with SN match to carburetor match, $12. Carburetor Service, $18. Carburetor Parts, $22; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Kimball OR)

John Deere L Hercules NXA/NXB engine manuals, used in early L serial number tractors, operators and parts manuals, $25 each; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Kimball OR)

John Deere L, LA, LI, LU Series Service Information, JD did not publish a service manual for the L series, in the 1940s the information was sent to dealers in the form of Service Bulletins and Service Hints, this information is compiled and can be also used as a service supplement to the owners manual, $25 plus shipping; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Kimball OR)

John Deere Service Operations Manual, 1936-1953. Covers lettered series tractors and early model 40, 50 and 60 tractors. Specifications, tune ups, timing, clearances on valves, pistons, rings, bearings. Procedures for engines, transmissions, brakes, etc. Still my best seller since 1999. Fills that void for which JD did not make model specific service manuals for some of the lettered series tractors. $25 plus shipping; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Kimball OR)

John Deere wagon, has hydraulic brakes, would make a good wagon to use with a team of horses, $800; Rob nnn-nnn-nnnn (Prineville OR)

John Deere winch, Carco Model C, fits 40, 420, 430, 440, $900; Eric nnn-nnn-nnnn (Amity OR)

Kubota Workshop Manual: L185, L245, L295, $20; Florian nnn-nnn-nnnn (Connell WA)

Lathe, South Bend, $1800; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)

Lathe, Tourant, 10”x48”, four jaw chuck, 3-phase, needs TLC, $600; Bill nnn-nnn-nnnn (Lodi CA)

Le Tourneau Model S ripper, six-foot-wide, three 24-inch shanks, cable operated, $450; Bill nnn-nnn-nnnn (Lodi CA)

Magazines, late 1980s-mid 1990s: Antique Power, Green Machine, N Newsletter, John Deere, Two Cylinder, Wheels of Time and maybe some others, all are in excellent condition, many never opened, two boxes full of hundreds of magazines, $25 for all; Gary Wright nnn-nnn-nnnn (La Verne CA)

Magazines, Two Cylinder, volume 25 number 1-6, all are new, still in the plastic, never opened, $25 plus postage; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Meat, Duroc pork, $3/lb. hanging weight, selling half or whole; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Metal Halide 400-watt fixtures, Multivolt, 24-inch square, horizontal mount, NOS in box, more than 10 available, $99 each; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Mill, small Shelton horizontal, less cross feed, $150; Bill nnn-nnn-nnnn (Lodi CA)

Mining and blacksmith items for sale: ore cars, ore buckets, hydraulic monitors, pumps, iron wheels, boilers, winches, etc. Call for your wants and prices; Ron nnn-nnn-nnnn (Grass Valley CA)

Minneapolis Moline hydraulic loader, 68-inch bucket, complete, can send pictures, reduced $775; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Mower, sickle, John Deere LA, five-foot, $200 obo; Florian nnn-nnn-nnnn (Connell WA)

Mower: John Deere M-51 for rear of M, complete, needs pitman stick, $200; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Mower: Massey Harris sickle bar, six-foot, Model No. 6, has caster wheels, hydraulic lift with mounting brackets, as found, $200; Jerry Van De Walle nnn-nnn-nnnn or nnn-nnn-nnnn (Yamhill OR)

New Holland side delivery hay rake, ground driven, works just fine, rake in good shape, $850; Rob nnn-nnn-nnnn (Prineville OR)

Oliver 70 parts tractors, $200 each, two available, also engine parts, radiators, and rims; Larry nnn-nnn-nnnn (Dexter OR)

Plow, John Deere L-LA single bottom, excellent used condition, complete with all brackets, hitch plates, levers, owners/parts manual, $250; Larry Schwarz nnn-nnn-nnnn or xxxx@xxxx.xxx (Centralia WA)

Plows: John Deere 3pt, 2-10-inch bottoms, $125. International 3-16 on rubber, hydraulic control, needs tires, $100. Allis Chalmers 1-16 with cast moldboard, $50; Jerry Van De Walle nnn-nnn-nnnn or nnn-nnn-nnnn (Yamhill OR)

Plows: McCormick 4-16-inch, heavy plow, trip lift, on rubber screw adjuster, $400. John Deere 680 6-16 pull plow, big beam, needs parts, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)

Plows: two Allis Chalmers three bottom units, $250 each; Sam Sweeney nnn-nnn-nnnn (Dayton OR)

Railroad items: switch stand, $150. Railroad crossing sawbuck, $200; Jon Rodgers nnn-nnn-nnnn (Sonora CA)

Rust-Oleum paint, tractor green (John Deere), $10/gallon; Bill nnn-nnn-nnnn (Lodi CA)

Shop equipment: Napa alternator/generator tester #1836. JoNAN Honda service tester. Sioux #620 valve grinder. Snap-On Blue Point valve seat grinder and stone dresser. Black and Decker Vibro-Centric valve seat grinder and stone dresser and valve lapper. All used, I can email pics; Don nnn-nnn-nnnn or xxxx@xxxx.xxx (Napa CA)

Sioux valve grinder, cabinet, $500; Lew Ward nnn-nnn-nnnn (Brush Prairie WA)

Snowplow, 10-foot, Gledhill Road Machinery, angle blade only, good condition, no mounting unit or hydraulics, $395, can send pictures; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)

Steel posts, used, eight feet, $2.50 each; Sam Sweeney nnn-nnn-nnnn (Dayton OR)

Toolbox, made out of heavy metal, 45”x37”x24”, Ford stamped on two sides, $75; Jerry Van De Walle nnn-nnn-nnnn or nnn-nnn-nnnn (Yamhill OR)

Track press, OTC, model Y7000, tooling for TD6-TD24, D2-D8, HD5-HD19, Oliver HG, OC3, OC4, Case 350, tooling can be adapted for most other application, have been using it since 1993, $5000; Eric nnn-nnn-nnnn (Amity OR)

Trailer, all steel bumper pull, 8’x20’, trailer house axles with spares, needs lights, $1500; Rob nnn-nnn-nnnn (Prineville OR)

Trailer: 10000 lb., 18-foot, tandem axle, flat bed, excellent wood floors, 10 ply excellent tires with spare, 2”x8” removable side boards, licensed for 9990 lbs., many tie downs; Al Barkl nnn-nnn-nnnn (Hazelton ID)

Travel trailer, Komfort, 27-foot, fifth wheel, $8000; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Wheels, implement, have two 24-inch wheels, may be from a manure spreader, $20 each; Hubert Bierly nnn-nnn-nnnn (Bend OR)

Windmill, Fairbanks Morse, Aermotor, sail, etc. blades are bent, make offer; Carol Gay nnn-nnn-nnnn (Keno OR)

Wood berry post, round, 4”x8’, used, $3 each, discount in sales of 500+; Sam Sweeney nnn-nnn-nnnn (Dayton OR)

Wooden wheels, four available, 45-inch diameter, 2-1/4-inch-wide, very good, always stored inside, $700 obo; Bob Qualey nnn-nnn-nnnn (Silverton OR)