Allis Chalmers WC tractors, two available, last chance before being scrapped, $350 obo for the pair, previous buyers have been no shows or backed out, tractors are both fairly complete, one has rear wheel weights, pictures on request; Kyle nnn-nnn-nnnn (Modesto CA)
Allis Chalmers HD9, HD5 and HD7, excellent condition, all three for $10000 obo; Robert nnn-nnn-nnnn (Terra Bella CA)
Allis Chalmers tractor, 40s maybe?, SN C61036 has a loader and hydraulic 3pt, not running but engine is free, complete, $500 if you haul, additional cost if we haul, call or text; Sirenna Smith nnn-nnn-nnnn (Weippe ID)
Allis Chalmers U, Continental engine, series 4843, needs restoration, reasonable offer; Tony Hempe nnn-nnn-nnnn (Hermiston OR)
Allis Chalmers U, Continental engine, series 844, needs restoration, reasonable offer; Tony Hempe nnn-nnn-nnnn (Hermiston OR)
Allis Chalmers U, Waukesha engine, series 13148, needs restoration, reasonable offer; Tony Hempe nnn-nnn-nnnn (Hermiston OR)
Allis Chalmers WD and WD45, $600 for the pair; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Allis Chalmers, 1939, parade condition, nice, $2500; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
Beet diggers, both self-propelled, single front wheel, mounted on Allis Chalmers 45s, one four cylinder, one six cylinder, $1000 each obo; Sam Sweeney nnn-nnn-nnnn (Dayton OR)
Case 12-20 (cross motor) power unit for parts, bit rusty, but a lot of good parts, nice looking water pump, mostly complete but no magneto, bottom of carburetor is missing, manifold poor, email best; Nathan Kehler nnn-nnn-nnnn or xxxx@xxxx.xxx (Newgate BC)
Case 300 diesel, 1956, utility, $1500; Ray Gossett nnn-nnn-nnnn (Hermiston OR)
Case 530, 1966, with Case loader, diesel, 12 speed transmission, live PTO, like new tires, rear weights, 3pt, lots of recent work has been done to it, paint, wiring, new gauges, brakes, injection pump, injectors, engine top end overhaul and more, $6500; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case 600 Wheatland, 6-cylinder diesel engine free, nice shape, low production, $2500; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case C, S, D, CC, SC, DC, manifolds, carburetors, magnetos, plus lots of other parts. Case C, S, or R&H HC245 rear round spoke wheels, 9x24, $300; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Case CK470 backhoe, rebuilt pump and bucket cylinder, needs work on outriggers and extension arm, can deliver to the right party; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Case DO orchard sheet metal, three sets available, each set has three pieces: left and right fenders and center steering wheel shroud, $450-$650, can send pictures; Gary Wright nnn-nnn-nnnn (La Verne CA)
Case M3B crawler forklift, very rare, factory made from Case 310 crawler, only about 80 were made in the 50s, four-cylinder gas, very nice shape throughout; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Case parts: VAC running engine, like new 12.4x28 tires on good VAC rims, front and rear VAC wheel weights, VAC radiator, VAC fenders, lots of other VAC tractor and engine parts. Also, numerous Case SC parts; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case tractor parts: VAC model: hood, side panels, battery box, floorboards, radiator, belt pulley with hydraulic pump, distributor, engine head, seats and steering parts, three sets of rear weights, plus misc. parts. SC model: engine parts including good block and high compression head, oversized M&W aluminum pistons, hood, dash, battery box, seat assembly, steering parts and other SC parts. 400B, 500B and 600B front grille and side panels; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Case VAC-11, 1953, SN 5750457, mechanically and cosmetically restored in 2019, tires 80%, $3500; Roy Wilber nnn-nnn-nnnn (Boring OR)
Case/David Brown 990, runs fine, rebuilt 3pt hydraulics, draft control valve and remote take off, new clutch, needs power steering work, will deliver to right party, $3000 or trade; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Cases: C, mid 30s, should be a good runner, $600. D, good runner, very good rubber, $1200. S, good runner, good rubber, $1200. S, C, D and DC parts tractors, ton of good parts, some are complete; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Caterpillar 10, pile of parts, $700; Buck Evans nnn-nnn-nnnn (Greenville IL)
Caterpillar 22, good condition, $900; Bill Swanson nnn-nnn-nnnn (Bayside CA)
Caterpillar D2, orchard, SN 5J2476SP, runs good, barn stored, reduced to $2000; Lyell nnn-nnn-nnnn (Squaw Valley CA)
Caterpillars: Cat 22, three available. Cat 30. $1200 for all; Bob Pearce nnn-nnn-nnnn (San Jose CA)
Cletrac AD2, 1937, sand blasted and painted, tracks good, seat reupholstered, cylinders honed, fuel pump and injectors cleaned, starter cleaned and refurbished, $2000 obo; Bob nnn-nnn-nnnn (Cromberg CA)
Cletrac AD, 1936, completely taken apart and sand blasted, fuel pump cleaned, injectors professionally cleaned, starter taken apart, cleaned, engine taken apart and cylinders honed and valves ground and refurbished professionally, tracks in good shape, seat reupholstered, Isaacson hydraulic dozer blade equipped, painted Cletrac orange, $2400 obo; Bob nnn-nnn-nnnn (Cromberg CA)
Farmall 230, wide front, with tool bars, fast hitch, runs good, tires good, $1750; Dave nnn-nnn-nnnn (Scotia CA)
Farmall A to 450 sheet metal plus miscellaneous parts; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Farmall A, new engine rebuilt, repainted, tractor and tires good condition, $1800; Florian nnn-nnn-nnnn (Connell WA)
Farmall C and Super C, both are complete with hydraulics, starters, generators, carburetors, etc., both are likely stuck, $600 each, great for restoration, yard art or parts, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
Farmall high crop, rare, runs good, starts good, good tires, $1995 or make offer, need to find a new home; Bob nnn-nnn-nnnn or nnn-nnn-nnnn (Fresno CA)
Farmalls: Super Cs, have two, one with wide front and one with single wheel and extra long axles, $600 for the pair. MDCH, has been turned into row crop with Schwartz wide front, engine not stuck but not running, like new tires all around, $1000 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
Ferguson TO 35, 1955, very strong motor, everything works, like new tires, very clean, good running, pictures on request; John Dornbusch nnn-nnn-nnnn (Brooking OR)
Ferguson TO20, runs, needs overhaul, 28-inch diamond tread tires, or will part out after July, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Ford 420, 1977, with loader and Gannon scraper, new bucket cylinders, diesel engine, new rear tires, serviceable 11/16 fronts, $5000 or trade; Ray Chrispens nnn-nnn-nnnn (Terra Bella CA)
Ford 801, diesel, in great shape, no dents, new tires, excellent all over, giving up the Select-O-Matic shifter due to age of 87, $2500; Dan Brossman nnn-nnn-nnnn or nnn-nnn-nnnn (Lander WY)
Ford 8N orchard sheet metal, left and right fenders, $750; Gary Wright nnn-nnn-nnnn (La Verne CA)
Ford 8N, 1951, side distributor, Sherman high/low transmission, tachometer (proofmeter), 12V, new gas tank, carburetor, wiring, tunes up, good metal and tires, runs great, comes with six foot rotating blade and miscellaneous 3pt implements, $3750; Claude Foley nnn-nnn-nnnn (Pioneer CA)
Ford 8N, rebuilt motor, runs good, looks like a new one, good tires, 12V, $2750; Vern Fought nnn-nnn-nnnn (Exeter CA)
Ford 8N-9N, $500-$1500, two with front buckets; Bill Swanson nnn-nnn-nnnn (Bayside CA)
Ford 900, gas, runs good, looks like a new one, good tires, $3750; Vern Fought nnn-nnn-nnnn (Exeter CA)
Ford 961, 1955, dual hydraulics, new battery, starter, and solenoid, power steering, $2500; Luther Davis nnn-nnn-nnnn (Battle Ground WA)
Ford 9N, 1939, metal good, runs good, Dearborn brush hog about 1957, $1500 for both; Dan nnn-nnn-nnnn or Avery nnn-nnn-nnnn (Fairfield CA)
Ford N series track conversion system, uses tracks that are driven by the stock rubber rear wheels, a great accessory to your N series tractor, can email pictures, call or email and lets make your dream come true, $150; Lauren Langdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Buhl ID)
Ford, pre 1950, good tires, does not run to our knowledge, has a Shawnee front loader on it, pictures available, $500; Alan Curriston nnn-nnn-nnnn (Eagle Point OR)
International 300 utility, 1955, restore or parts, $700; Rex Wright nnn-nnn-nnnn (Gardnerville NV)
International 300 utility, 1956, with McCormac hydraulic loader with 72-inch bucket, not running, good sheet metal, restorable, can send pictures, $1100 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
International C, with loader, reasonable offer; Tony Hempe nnn-nnn-nnnn (Hermiston OR)
International Cub Lowboy 154, 1972, good condition, $1200; Florian nnn-nnn-nnnn (Connell WA)
International Cub white grille, has hydraulics, good rubber, nice sheet metal, runs excellent, comes with blade, plow, disc, mower, lights, very nice tractor package deal, $3250; Don Chappell nnn-nnn-nnnn (St Helens OR)
International T9, crawler, gas, with blade, not running, offer; Hubert nnn-nnn-nnnn or John nnn-nnn-nnnn (Bend OR)
International tractor, pre 1960s, front bucket and rear brush hog, good tires, was working four years ago, but haven’t tried lately, $800, pictures available; Alan Curriston nnn-nnn-nnnn (Eagle Point OR)
John Deere 1010 crawler parts for sale, no hood or grille; Bob Gauntt nnn-nnn-nnnn (Vancouver WA)
John Deere 40-420-430 belt pulley, $200; Dave nnn-nnn-nnnn (Aurora OR)
John Deere 420 crawler, long track with Holt hydraulic blade, sat for years, has good track chain, pads and sprockets are wore but usable, motor is stuck, crawler is complete with canopy, good sheet metal, selling as is for parts or restore, can ship, $2200 obo; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 crawler, nice Holt hydraulic blade, four roller, motor runs but needs carburetor work or replacement, good oil pressure, steers excellent both ways, real nice undercarriage about 90%, clean little crawler, nice sheet metal, PTO off the back, very nice, $4500, can ship; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420 hood and grille, some dents and rust, photos available, $250 obo; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere 420 Utility, 1957, nice original condition, five speed, direction reverser, good tires, original top link, starts, runs and drives good, $2650; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere 420C five roller long track crawler, heavy duty hydraulic tilt blade, manual angle and hard to find 3pt hitch, no top link, good undercarriage, good sheet metal, canopy, reverser does not work but main transmission works great both forward and reverse, has a recent main clutch, steers both ways, very nice hard to find machine, drives good, call for info, $8900; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
John Deere 420C, call for needs; Hans Strauss nnn-nnn-nnnn (Stevenson WA)
John Deere 430w, 1959, options include: Float-O-Ride seat, spin out rear wheels, dual Touch-O-Matic rockshaft hydraulics, five speed transmission, has newer steering wheel, tune up, plug wires, rewire, PTO bearings and seals, tachometer cable, new brake seals, new brake discs, new brake springs, freeze plugs, antifreeze. Spare parts include complete dual Touch-O-Matic rockshaft assembly and repairable spare axle. Spring tooth, scraper and gopher bait tool included, pictures on request, $3000 obo, negotiable depending on implements wanted; Kyle nnn-nnn-nnnn (Modesto CA)
John Deere 440I, gas, wheel tractor with Blackwelder forklift, extensive mechanical work completed and it runs great, all forklift functions (lift, tilt and side shift) work, decent tires and sheet metal is good, have original Blackwelder manuals as well as copies of the 440 manuals, $3900, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere 520 hood, nice, $100; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere 720 nose piece, includes grille, needs paint, $150; Vern Fought nnn-nnn-nnnn (Exeter CA)
John Deere A, 1935, open shaft, new paint, starts good and runs good, steel wheels, nice tractor, $6500; Buster Brown nnn-nnn-nnnn (Yuma AZ)
John Deere A, 1940, SN 493887, parts tractor, rough, missing cylinder head, carburetor, one piston, manifolds, front grilles, one rear wheel rusted out, can email pictures, $500 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere A, B, G, H, M, 50 and 60 parts. JD MT fenders and brackets, $100. JD 26-inch waffle wheels in great condition, no rust, good mounting holes, $400. JD 30-inch wheel cast centers PN F1590R, $100 each; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere AN, 1948, single front wheel, good tires and tin all around, starts easily and runs great, charging system works, $2400, email for photos or see at vintagetractors.com; John Boehm nnn-nnn-nnnn or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere AO, electric start, belonged to a friend, $1650; Dave nnn-nnn-nnnn (Aurora OR)
John Deere AWH, 1946, spoke rear wheels, high clearance and wide front end, only 327 made in nine years of production, runs and drives, $2900, email for photos or YouTube video or see at vintagetractors.com; John Boehm nnn-nnn-nnnn leave message or email preferred xxxx@xxxx.xxx (Woodland CA)
John Deere B wide front pedestal and steering shaft, no welds, $50 obo; Kyle nnn-nnn-nnnn (Modesto CA)
John Deere B, 1940, SN 89882, fair-good sheet metal, electric start, rockshaft, not running, needs tires, missing battery cover, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere B, 1946, electric start, tires poor, ran a couple of years ago, $500; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
John Deere BO Lindeman crawler, has ID tag but no numbers, nice runner, like new undercarriage, has hydraulic pump, new paint, runs good; Buster Brown nnn-nnn-nnnn (Yuma AZ)
John Deere crawler parts, new, used and reconditioned, BO, MC, 40, 420, 430, 440 and 1010, also new parts for later crawlers; Larry Wilcox nnn-nnn-nnnn or jdcrawlers.com (Horace ND)
John Deere D, runner, styled version, dual exhaust, excellent rubber, $4500 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
John Deere DI, 1949, electric start, good tires, runs good, starts gas and runs on distillate, weighs 5250 lbs., $3000; Danny Ponce nnn-nnn-nnnn (Los Angeles CA)
John Deere G, 1947, pan seat, only 2500 made, electric start, runs, good metal, fair tires, needs manifold gasket, $2600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere G, no tag, electric start, Roll-O-Matic front end, straight tin, older paint, engine overhauled and very few hours, can email pictures, $3100; Buster Brown nnn-nnn-nnnn (Yuma AZ)
John Deere GP, 1929, excellent runner, decent tires, call for info, $5250; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere LA, 1941, nice tractor, no SN, fair tires, needs decals, $2000; Hans Strauss nnn-nnn-nnnn (Stevenson WA)
John Deere LA, 1945, SN 11102, good paint, decal and rubber, photos available, $3500 obo; Dick Wilson nnn-nnn-nnnn (Kingsburg CA)
John Deere LA, tires are bad, engine is stuck, $500 obo; Florian nnn-nnn-nnnn (Connell WA)
John Deere Lindeman crawler, new tracks, new valve grind, no welds or cracks, very nice original crawler, no blade, $7500; Don Chappell nnn-nnn-nnnn (St Helens OR)
John Deere L-LA belt pulley, $225; Dave nnn-nnn-nnnn (Aurora OR)
John Deere M, 1948s, have two, will sell together, SN 18412 and 22768, parts tractors, partially disassembled, includes parts, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
John Deere M, 1949, SN 32269, good shape, starts easy and runs good, owned it for a few years and used for harrowing and pulling side delivery rake, very restorable which was the original intent, but too many projects. It has: powder coated rear wheels, near new rear tires, fronts are in good shape, original 2pt hitch, rear belt drive minus linkage, Model 20 JD belly mower in pieces but all there including manual, new battery door, includes mandrel and 24 inch saw blade, reinforced front axle from previous loader use, includes shop, parts and operating manual, new muffler, $4000, email for pictures; Richard Deschamps nnn-nnn-nnnn or xxxx@xxxx.xxx (Bozeman MT)
John Deere R, diesel, rebuilt motor and starter motor, restored and in excellent condition, only been used in four parades and stored inside, can be used in show or work, possibility of delivery reasonably, $6000; Dan Brossman nnn-nnn-nnnn or nnn-nnn-nnnn (Lander WY)
John Deere R, runs good, rear on 26s, needs TLC, $2200; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere tractor, pre 1960, new tires, does not run, $400, pictures available; Alan Curriston nnn-nnn-nnnn (Eagle Point OR)
John Deeres: 37 AI, three Hs, three As, three Bs, 29 D in parts; Chuck Wallace nnn-nnn-nnnn (Toledo WA)
Massey Ferguson 135, 1975, three-cylinder, eight speed, independent PTO, decent tires, new alternator and coil, recent restoration, $3100; Frank nnn-nnn-nnnn (Manning OR)
Massey Harris 25, 1925?, nice tractor, older paint, runs good, can email pictures, $4900; Buster Brown nnn-nnn-nnnn (Yuma AZ)
Massey Harris 30G, row crop, not running, fair-good sheet metal, 540 PTO, hydraulics, missing one rear tire and brake parts, can email pictures, $650 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
McCormick Deering 15/30 tractors, five available, three on steel and two on rubber, can make two good tractors; Wesley nnn-nnn-nnnn (Oroville CA)
McCormick Deering I-4, turns over, good shape, $700; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering O4, parting out, orchard belt pulley, shutters, plus miscellaneous; Mark Parker nnn-nnn-nnnn (Lebanon OR)
McCormick Deering OS12, 1934, good tires, wheel weights on all four, high speed transmission, orchard fenders, PTO, engine runs, clutch and transmission work good, $900; Rex Wright nnn-nnn-nnnn (Gardnerville NV)
McCormick Deering OS4, painted and shown, but not for a while, $3000; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
McCormick Deering TD6s, have two nonrunners, one has blade on it, $500 obo; David Ruhland nnn-nnn-nnnn (Garden Grove CA)
McCormick Deering WK-40, full steel, original engine free, $3000; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Meyers bulldozer pump, turns over, $75; Dave nnn-nnn-nnnn (Aurora OR)
Minneapolis Moline 5 Star, 1957, sheet metal rough, 3pt, 540 PTO, Amplitorque, tricycle front, 15.5-38 rears, need to be replaced, can email pictures, $3400; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline UTS, 1950, parting out, have 3/4 of the tractor, good rear end, some lower engine parts, grille, etc., email is best; Nathan Kehler nnn-nnn-nnnn or xxxx@xxxx.xxx (Newgate BC)
Minneapolis Moline ZAN, 1952, SN 00800561, complete tractor, straight sheet metal, hydraulics, 540 PTO, Schwartz wide front, 13.6-38 tires, engine is loose, has red nose front, can email pictures, $2000 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Minneapolis Moline ZAU, 1952, SN 00614462, complete tractor, straight sheet metal, was running when parked, can email pictures, $2000 obo; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Oliver 70 parts: flat band front wheels, row crop wide front knees, belt pulley manifold and miscellaneous part; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Oliver 70 Standard, 1948, older restoration, starts, runs and drives good, good tires, $1300 obo; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
Oliver 70s, two available, parts tractors, stuck, $200 each. Also, lots of 70 parts: radiators, engine parts, rims; Larry nnn-nnn-nnnn (Dexter OR)
Parting out: Allis Monarch 35. Caterpillar 20 and 30. Massey Ferguson 65 gas; Buck Evans nnn-nnn-nnnn (Greenville IL)
Rims: 24-inch, Case 430/530 rims with bolt in 8-hole centers, currently have 16.9x24 tires mounted on them, tires not much good, both for $200; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Tire: one 14.9x24 Titan on Kubota rim, new take off, $350; Dick Benson nnn-nnn-nnnn (Grants Pass OR)
Tires: Pair of 9.5-42 Goodyear, 30% tread, $200. Three 12.4-42 tires, 20-60%, $50-$100 each. 13-36 45-degree bar tread, good shape, $150. Several 11.2, 12.4, 13.6-38 singles in good usable condition, $50-$100 each; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
Wheel weight: single rear International 354374R1, $75; Mike nnn-nnn-nnnn (Puyallup WA)
Wheel weights: Farmall Cub rears, $75 each. Farmall C, $80 each; Florian nnn-nnn-nnnn (Connell WA)
Wheels (two): John Deere 8x24, waffle type, good shape, $400; Vern Fought nnn-nnn-nnnn (Exeter CA)