Walnut or Almond orchard roller, eight-foot-long, can be filled with water; Wesley nnn-nnn-nnnn (Oroville CA[PS1])
All in one hydraulic unit, ran by PTO or belt pulley, was on a little crawler to lift the blade, includes drive shaft with a belt pulley which drives a pump with a reservoir tank and lever control all in one, comes with two short hydraulic rams, $300 for all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Anchor chain, vintage, over 300 feet (football field), 4-1/2-inch links with crossbars, neat looking chain for yard art, etc., $1000 takes all; Joe Giordano nnn-nnn-nnnn or xxxx@xxxx.xxx (Port Orchard WA)
Barbwire, five rolls of two-point, 1300-foot rolls, got several years ago and never used, $45 each; Tom Florea nnn-nnn-nnnn (Bonners Ferry ID)
Blades, front mounted, seven foot, $75, five foot, $50; Jerry Van De Walle nnn-nnn-nnnn or nnn-nnn-nnnn (Yamhill OR)
Caterpillar “50 Years on Tracks” book, rare, copyright 1954, book is excellent, book cover has wear, $75, 5141 Kimball Rd, Ontario OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
Caterpillar manuals: “Servicemen’s Reference Book for Diesel Engines”, form 5060 dated Jan 1939, tight binding, no missing pages, multiple spots and smudges. “D7 Tractor Parts Catalog for 7M4325-9999 and 3T1 and up”, tight binding, clean pages, labeled for machine 3T3171, 1945 Cat sold to Pendleton Ranches. $20 for the pair including postage, photos available by email; Mark nnn-nnn-nnnn (Hillsboro OR)
Caterpillar sales brochures, have added more to inventory, contact for availability by make/model, 5141 Kimball Rd, Ontario OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
Craftsman radial arm saw, 12 inch, 110-220V on metal cabinet, $200; David Rhuland nnn-nnn-nnnn (Garden Grove CA)
Cultivator, Planet Jr., several attachments and chains, needs one tire, $150; Rich Hanna nnn-nnn-nnnn (Rexford MT)
Dearborn two moldboard and two bottom disc, both 3pt, $250 each; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
Disc, John Deere RW, 12-foot, wheel disc, nice shape, $850; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Disc, small, six foot, converted to 3pt, usable, $200; David Rhuland nnn-nnn-nnnn (Garden Grove CA)
Electric motors: NOS. two 1/2 hp, one phase, $99. Two 1 hp, one phase, 56 fr, C face, $139. Four 1 hp, three phase, 145T fr, $99. Two 1-1/2 hp three phase, 145T fr, $108. Three 3 hp three phase 182T fr, $142. One 5 hp three phase 184T fr, $168. One 10 hp three phase 215T fr, $246. One 20 hp three phase 256T fr, $486. One 15 hp three phase used, $275. One 40 hp three phase 240V, $477; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Fire engine body, off 86 Ford F350, has hose reel and PTO pump, $2000 obo, will consider trades, call or text; Sirenna Smith nnn-nnn-nnnn (Weippe ID)
Fobs: Autocar Truck, $20. Sullivan Machinery/The Sulliscrew, $25. Insley, $28. Warner & Swasey, Gradall, $35. Dart, $20. Bucyrus Erie, $35. Gar-Bro, $25. Lasting Bonafide Service, LB Smith, $20. Worthington BlueBrute Handheld Rock Drills, $30. International w/ Truck and Loader, $25. Caterpillar w/ Loader, $25. Terex/GM, $25. Lull, $18. Wabco, $18. Michigan/ w Loader, $25. Gardner-Denver Jackhammer, 28. Cadillac, 1933, $30. Can provide addition information on Company Inscriptions on backs, 5141 Kimball Rd., Ontario, OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
Ford 1-1/2-ton chain hoist, works good and is heavy duty, $40; Kyle nnn-nnn-nnnn (Modesto CA)
Ford implements, to be sold as a lot, all 3pt: rototiller, two bottom spinner plow, six foot blade, four and six inch auger, five foot brush hog, 40 lb. wheel weights, two ton adjustable hoist for motors, new tire chains, some other parts and books, all for $1700, all nearly new and painted; Dan Brossman nnn-nnn-nnnn or nnn-nnn-nnnn (Lander WY)
Forklift parts: mast, believed to be a two stage, $100. Three sets of forks, $100/pair; David Rhuland nnn-nnn-nnnn (Garden Grove CA)
Forklift, gas, nice old lift, good runner, extended forks; Bob Vogel nnn-nnn-nnnn (Santa Paula CA)
Galion Motor Grader parts book, Model #T500L, SN 02944 and up, $15; Florian nnn-nnn-nnnn (Connell WA)
Grinder for shop, large pedestal, 3-phase, two 16-inch stones, heavy, $600; Bill nnn-nnn-nnnn (Lodi CA)
Hydraulic fluid, surplus, case of 24 quarts, $18 per case; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Implements: dump rake, double disk and CC cultivator, make reasonable offers; Tony Hempe nnn-nnn-nnnn (Hermiston OR)
International 64 combine, pull type, no motor, six-foot header, good canvas, some new belts, reduced to $175; Florian Nordhus nnn-nnn-nnnn (Connell WA)
Iron wheel cart, large, make good engine cart, $350; Dave nnn-nnn-nnnn (Aurora OR)
John Deere 1010 wheel tractor operator’s manual, has notes from a previous owner, used condition, but all there, $25 plus shipping; Pat nnn-nnn-nnnn (San Ramon CA)
John Deere 3pt hitch, complete off 49 B, original JD, $500 obo; Bill Cooper 509-364-329 (Glenwood WA)
John Deere 520 Service School Information, JD didn’t publish a manual specifically for the 520/530, this is additional updated to the Model 50 manual SM2010, $25 plus shipping, 5141 Kimball Rd, Ontario OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
John Deere 620 Service School Information, JD didn’t publish a manual specifically for the 620/630, this is additional updated to the Model 60 manual SM2008, $25 plus shipping, 5141 Kimball Rd, Ontario OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
John Deere barge grain wagon, hydraulic dump, 1940s-1950s, flair style box in good shape, built by Triumph Wagon Co. for JD, original “Triumph” lettering visible, mounted on a very nice JD 963 gear that has very tight steering with minimum wear overall, equipped with Midwest Industries scissor type hydraulic mechanism, lift works and long hose is good, but cylinder seal leaks, box has wooden slide gate to control grain unloading, original tongue in nice condition, includes side boards, great restoration project or leave natural, use in parades, shows, and threshing events, box is 10’-7”x4’-7” and wheel width is 5’-10”, delivery possible free/fee per destination, headed to Grand Junction CO in June, can send more photos and details, $1800 obo; Andy nnn-nnn-nnnn (San Luis Obispo CA)
John Deere carburetor manuals by Marvel Schebler: Carburetor Application list, covers early model tractors and equipment through New Generation with SN match to carburetor match, $12. Carburetor Service, $18. Carburetor Parts, $22, 5141 Kimball Rd, Ontario OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
John Deere L Hercules NXA/NXB engine manuals, used in early L serial number tractors, operators and parts manuals, $25 each, 5141 Kimball Rd, Ontario OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
John Deere L, LA, LI, LU Series Service Information, JD did not publish a service manual for the L series, in the 1940s the information was sent to dealers in the form of Service Bulletins and Service Hints, this information is compiled and can be also used as a service supplement to the owners manual, $25 plus shipping, 5141 Kimball Rd, Ontario OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
John Deere M or MT square rear tool bar, $100; Mark Parker nnn-nnn-nnnn (Lebanon OR)
John Deere Operation, Care and Repair of Farm Machinery books, two full sets, 1-28 editions, $600 each. Singles also available, two of #1 edition, $175 each. Two of #2 edition, $150 each. One of #2 edition, $100. One #3 edition, $75. Twenty more individual various editions, 4-28, $20-$40 each, 5141 Kimball Rd, Ontario OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
John Deere sales brochures, have added more to inventory, contact for availability by make/model, 5141 Kimball Rd, Ontario OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
John Deere Service Operations Manual, 1936-1953. Covers lettered series tractors and early model 40, 50 and 60 tractors. Specifications, tune ups, timing, clearances on valves, pistons, rings, bearings. Procedures for engines, transmissions, brakes, etc. Still my best seller since 1999. Fills that void for which JD did not make model specific service manuals for some of the lettered series tractors. $25 plus shipping, 5141 Kimball Rd, Ontario OR 97914; Jim Robinett nnn-nnn-nnnn or xxxx@xxxx.xxx (Ontario OR)
John Deere winch, Carco Model C, fits 40, 420, 430, 440, $900; Eric nnn-nnn-nnnn (Amity OR)
Kubota Workshop Manual: L185, L245, L295, $20; Florian nnn-nnn-nnnn (Connell WA)
Large collection of Caterpillar parts and service books: Cat 10 operators book, Cat 22 parts book, D4 operators book – 4G, 7J, 2T, 5T, D8 46A up operation and maintenance, D8 14A-15A, D4 parts book 4G1, Cat 30 parts catalog 56762 and PS2933, D6 8U-9U operators book, D4 service reference book – 4G, 7J, 2T, 64, 7U, D8 service reference book – 1H, 8R, 2U, 13A, diesel engine service book D4600 Industrial D6, D2 service book – 3J, 5J, 4U, 5U, D4 operation and maintenance 6U-7U, 22 operation and maintenance 2F, D9 operation and maintenance 66A1-up, 9U and 9S dozer 2E 4P-55C 4P, cable control No 27, 25, 24, 23, 21, D4 parts book 7J5104 to 7J999, D2 parts book 3J5001-up, 22 2F1351 parts book, D9 ripper 65C1-up, D9 parts, 66A3266 up, D9 dozer parts 52C1 to 52C877, 619 parts 90E up gas starting, D8 parts 2U9662 up, D8 part 13A-12A3703. $250 for all, do not want to split them up; Bob Vogel nnn-nnn-nnnn (Santa Paula CA)
Lathe, Tourant, 10”x48”, four jaw chuck, 3-phase, needs TLC, $600; Bill nnn-nnn-nnnn (Lodi CA)
Le Tourneau Model S ripper, six-foot-wide, three 24-inch shanks, cable operated, $450; Bill nnn-nnn-nnnn (Lodi CA)
Magazines, late 1980s-mid 1990s: Antique Power, Green Machine, N Newsletter, John Deere, Two Cylinder, Wheels of Time and maybe some others, all are in excellent condition, many never opened, two boxes full of hundreds of magazines, $25 for all; Gary Wright nnn-nnn-nnnn (La Verne CA)
McCormick Deering seed hopper and three seed plates, $90. McCormick Deering fertilizer hopper, dual drop, $60; Mike nnn-nnn-nnnn (Puyallup WA)
Meat, Duroc pork, $3/lb. hanging weight, selling half or whole; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Metal Halide 400-watt fixtures, Multivolt, 24-inch square, horizontal mount, NOS in box, more than 10 available, $99 each; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Mill, small Shelton horizontal, less cross feed, $150; Bill nnn-nnn-nnnn (Lodi CA)
Mining cars, one manufactured by Cour Delene Hardware and Foundry, Wallace ID. The other, CS Card Iron Works, Denver CO. Both roll and dump, $1800 each; Bill Weatherby nnn-nnn-nnnn (Lewiston ID)
Minneapolis Moline hydraulic loader, 68-inch bucket, complete, can send pictures, reduced $775; Ronn Boehlke nnn-nnn-nnnn or xxxx@xxxx.xxx (Klamath Falls OR)
Mott five-foot flail mower in very good shape, runs right direction for Cub, $450 obo; David nnn-nnn-nnnn (Garden Grove CA)
Mower, sickle, John Deere LA, five-foot, $200 obo; Florian nnn-nnn-nnnn (Connell WA)
Mower: belly mount sickle bar mower for a Cub, $60. Implement hand lift for a Cub, $90; Mike nnn-nnn-nnnn (Puyallup WA)
Mower: John Deere M-51 for rear of M, complete, needs pitman stick, $200; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Mower: Massey Harris sickle bar, six-foot, Model No. 6, has caster wheels, hydraulic lift with mounting brackets, as found, $200; Jerry Van De Walle nnn-nnn-nnnn or nnn-nnn-nnnn (Yamhill OR)
Mower: sickle bar, 2pt, one five foot and one six foot, $225, all restored couple of years ago; Florian nnn-nnn-nnnn (Connell WA)
Oliver outboard motor, 15 hp, 1955, rare, original, near new condition, Google 1955 Oliver Outboard for video of it running, $300; Lee nnn-nnn-nnnn (Yucaipa CA)
Parts manuals for many tractors, most brands, $30 each; David Rhuland nnn-nnn-nnnn (Garden Grove CA)
Plow: John Deere two bottom, on rubber, $300. McCormick three bottom, hydraulic lift, $300. Two-way disc plow, 3pt, $150; David Rhuland nnn-nnn-nnnn (Garden Grove CA)
Plows: 2pt, one bottom roll over, $275. 2pt, two bottom, $275. All restored couple of years ago; Florian nnn-nnn-nnnn (Connell WA)
Plows: John Deere 3-14, 3pt, mounted plow for 420-430-435 tractors, good used condition, $300. JD H-1 mounted plow for model H, does not have lift mechanism, $150. McCormick Deering breaking plow, nice original condition, has repair to end of moldboard; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
Plows: McCormick 4-16-inch, heavy plow, trip lift, on rubber screw adjuster, $400. John Deere 680 6-16 pull plow, big beam, needs parts, $600; Mark Parker nnn-nnn-nnnn (Lebanon OR)
Plows: two Allis Chalmers three bottom units, $250 each; Sam Sweeney nnn-nnn-nnnn (Dayton OR)
Road grader, smaller four wheeled, possibly John Deere, converted to tractor pull, $300; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
Rust-Oleum paint, tractor green (John Deere), $10/gallon; Bill nnn-nnn-nnnn (Lodi CA)
Safe, very old, very heavy, $2500; Bob Vogel nnn-nnn-nnnn (Santa Paula CA)
Steel posts, used, eight feet, $2.50 each; Sam Sweeney nnn-nnn-nnnn (Dayton OR)
Subsoiler, McCormick Deering, pull type, on steel wheels, nice original condition, $300; Jake Winn nnn-nnn-nnnn or xxxx@xxxx.xxx (Albany OR)
Toolbox, made out of heavy metal, 45”x37”x24”, Ford stamped on two sides, $75; Jerry Van De Walle nnn-nnn-nnnn or nnn-nnn-nnnn (Yamhill OR)
Track press, OTC, model Y7000, tooling for TD6-TD24, D2-D8, HD5-HD19, Oliver HG, OC3, OC4, Case 350, tooling can be adapted for most other application, have been using it since 1993, $5000; Eric nnn-nnn-nnnn (Amity OR)
Trailer, 14000 lb., 20-foot, electric lift/brakes, heavy duty ramps, drive over fenders, toolbox, new tires, $7500 obo, can send pictures; Floyd Ragsdale nnn-nnn-nnnn or xxxx@xxxx.xxx (Sun Valley NV)
Trailer, 18-foot, diamond plate floor, 12000 lb. winch, steel and aluminum ramps, $4500; Bob Vogel nnn-nnn-nnnn (Santa Paula CA)
Trailer, Ford, two-wheel, hydraulic dump bed, made for 9N tractors 40-41, $500; David Rhuland nnn-nnn-nnnn (Garden Grove CA)
Trailer: 10000 lb., 18-foot, tandem axle, flat bed, excellent wood floors, 10 ply excellent tires with spare, 2”x8” removable side boards, licensed for 9990 lbs., many tie downs; Al Barkl nnn-nnn-nnnn (Hazelton ID)
Tumble bug dirt movers, one 3pt and one tongue pull, $250 each; Rod Hisken nnn-nnn-nnnn (Oregon House CA)
Vineyard sprayer, 1920s, needs to be in a museum or a wine tasting room, 99% complete, look like a Ford industrial motor with 1000 psi pump and redwood tank, model “Bean Super J”, six foot rear wheels, three cylinder pump; Chuck Wallace nnn-nnn-nnnn (Toledo WA)
Wagon wheels, reasonable offer; Tony Hempe nnn-nnn-nnnn (Hermiston OR)
Well drilling rig, Armstrong Manufacturing Co. of Waterloo IA, hammer type, would make great home-built tractor project with its bull gear driven steel wheels, can email pictures, $2500; Lauren Langdon nnn-nnn-nnnn or xxxx@xxxx.xxx (Buhl ID)
Wood berry post, round, 4”x8’, used, $3 each, discount in sales of 500+; Sam Sweeney nnn-nnn-nnnn (Dayton OR)
Wooden wheels, four available, 45-inch diameter, 2-1/4-inch-wide, very good, always stored inside, $700 obo; Bob Qualey nnn-nnn-nnnn (Silverton OR)
[PS1]Make as new as it was in wrong category